KZhead
Тәжірибелік нұсқаулар және стиль

New Blade and First Bomb Shrapnel - Old Sawmill Repair #7

AFH Projects
2022 ж. 10 Мам.
3 519 007 Рет қаралды
Жүктеу

I got the new blade for this old sawmill repair project Laimet 100 and it cuts finally! In this video, I put in a brand new blade and made some cuts. I got the bomb shrapnel in the first log, but it didn't do anything to the blade teeth, so I was lucky.
I started an old sawmill repair. It's a mobile sawmill that has been junked. It has a bent frame in several spots, the axle is cut off, the drawbar missing, lots of rust, and so on...
👍Thanks for watching and please don't forget to SUBSCRIBE!
👉Special thanks to my PATREON fans! MY PATREON page:
/ afhprojects
​ @Donn DIY
@Tar
#sawmill #sawmilling #oldsawmill #afhprojects
👉SUBSCRIBE LINK:
/ @afhprojects
👉MY CHANNEL LINK:
/ @afhprojects
~-~~-~~~-~~-~
Please watch: "BIG Beaver Dam Removal With Excavator"
• Huge Beaver Dam Taken ...
~-~~-~~~-~~-~

Пікірлер

  • Great job! Really enjoyed the sawmill restore series!!! Hope to see more of the mill Thank you!

    @slhasebroock@slhasebroock Жыл бұрын

    • Glad you like it! Thanks 👍

      @AFHProjects@AFHProjects Жыл бұрын

    • @@AFHProjects ,

      @user-th9ws1od3i@user-th9ws1od3i Жыл бұрын

    • ​@@user-th9ws1od3i😅) P L PlLLLLL0

      @ginaschmeisser7537@ginaschmeisser753710 ай бұрын

  • Love watching these old saws. I grew up manufacturing & repairing saws up 144" in South Georgia for almost 35 years

    @82lube@82lube Жыл бұрын

    • Thanks! Wow, that is a lot of years. You must be know everything about these. These types of sawmills aswell?

      @AFHProjects@AFHProjects Жыл бұрын

    • This sawmill is not even old. About only 50 yo. 70's or 80's model.

      @romppaukko@romppaukko9 ай бұрын

  • Setingan yg bagus menghasilkan kayu yang rata dan lurus Salam sukses

    @SuryoAsri@SuryoAsri4 ай бұрын

  • Maquinário bastante eficiente e simples. Congrats !

    @eustaquiopereira4267@eustaquiopereira42672 жыл бұрын

    • Да, и безопасная👍

      @user-wh9od4sb2m@user-wh9od4sb2m Жыл бұрын

  • Glad everything turned out all right with the metal and using the detector will prove itself worthy. Now to get the oil can and lube everything up. The millers here just use used oil so nothing wasted. Good lumber too! God bless!

    @lewiemcneely9143@lewiemcneely91432 жыл бұрын

    • Thank you!

      @AFHProjects@AFHProjects2 жыл бұрын

    • @@AFHProjects how much did such a saw cost you

      @juris.m@juris.m2 жыл бұрын

    • I don't know. We had this laying around a years. In this condition I think around 2k or less maybe 🤔

      @AFHProjects@AFHProjects2 жыл бұрын

    • Ll

      @chrisedgington1603@chrisedgington1603 Жыл бұрын

  • Diffrent kind of saw mill for sure.

    @wilmamcdermott3065@wilmamcdermott3065 Жыл бұрын

    • Common here.

      @AFHProjects@AFHProjects Жыл бұрын

    • Yea we use to run a carrige head saw Type log dogs used on all smaller trees . blade had strong backs so would toss loose wood

      @wilmamcdermott3065@wilmamcdermott3065 Жыл бұрын

  • Nice upgrade! It seems to be working perfectly! Enjoy!

    @aldomottino850@aldomottino8502 жыл бұрын

  • Que lindo el tañir del acero,cuando puso la sierra...

    @pilowtop7077@pilowtop70772 жыл бұрын

  • Good job 👏👏👏

    @lucianoquadarella8@lucianoquadarella82 жыл бұрын

  • Boa noite!!!!!! Muito bom mesmo, o trabalho dá serra. Macaé RJ.

    @joseluizvidal6097@joseluizvidal60972 жыл бұрын

    • Next step, I believe 23:42

      @jannitert6576@jannitert6576 Жыл бұрын

  • Excellent work, you did a great job of bringing back something beat up, twisted, and rusty into full operations. Look forward to see what's next

    @johngrace199@johngrace199 Жыл бұрын

    • Thanks, John for a good word!

      @AFHProjects@AFHProjects Жыл бұрын

  • sawing for 55 yrs here mm it's always the new blade that finds metal, always

    @dailrharris9009@dailrharris900911 ай бұрын

    • Yeah, Murphys law.

      @AFHProjects@AFHProjects11 ай бұрын

  • Good restoration with operationalisation. Great job bro.

    @rajdhar327@rajdhar327 Жыл бұрын

    • Thanks 👍

      @AFHProjects@AFHProjects Жыл бұрын

  • G'day AFH, I like your articulated log loader I did some milling for a company once they had a Lemat mill they couldn't get it to run true they had to finish a semi load of roof batons for an order so they hired me and another bloke with 10/30 Lucas mills and we finished the job in two days 👍

    @ishure8849@ishure88492 жыл бұрын

  • I have an old circular blade mill that you can take a tool that unlocks each individual tooth so you can replace them, which was great for times like that. Sure hop you're going to build a roof over that "babydoll".

    @johnc5874@johnc58742 жыл бұрын

    • Yeah, I have never seen these blades here in Estonia. I'm not sure about the roof, but have to cover it somehow if not using it.

      @AFHProjects@AFHProjects2 жыл бұрын

  • My Dad Made Knifes out of Old Blades, they were top Quality. Really Held a Edge.

    @robertmclean9737@robertmclean9737 Жыл бұрын

    • Это Н её лезвие, а дисковая пила, , пишут не понятно, что

      @user-oo5qd6ns8c@user-oo5qd6ns8c Жыл бұрын

  • Крутая вещь!👍

    @duna6158@duna6158 Жыл бұрын

    • 100 ЛЕТ НАЗАД

      @user-cv4eo3ue2x@user-cv4eo3ue2xАй бұрын

  • Good video. The quickest way to find metal in a log is to install a new blade.

    @TheOldManAndTheSaw@TheOldManAndTheSaw2 жыл бұрын

    • That's right 😄

      @AFHProjects@AFHProjects2 жыл бұрын

  • The old machine ,but still good🙏🏼👌👍

    @mriwayanofficial69@mriwayanofficial69 Жыл бұрын

  • I highly recommend getting a metal detector wand to look for any metal embedded in the logs before milling, large production lumber mills does it before milling all logs.

    @jasonbabila6006@jasonbabila60062 жыл бұрын

    • I will do that. There is no other option. We have this stuff a lott in trees.

      @AFHProjects@AFHProjects2 жыл бұрын

    • L

      @mbahdjari8063@mbahdjari8063 Жыл бұрын

  • Nice..Amazing

    @alltechamazing3536@alltechamazing3536 Жыл бұрын

  • I'm glad you're just sawing for yourself as that mill is not for production!

    @geraldsundberg3610@geraldsundberg3610 Жыл бұрын

    • Yeah, may be small scale production, like for neighbors and locals.

      @AFHProjects@AFHProjects Жыл бұрын

  • The purchase of a metal detection wand would be useful in the future my friend. Great video's and skill. Greetings from Canada.

    @chrishoos9755@chrishoos9755 Жыл бұрын

    • Thanks Chris! Detector will come for sure. We have lots of metal inside the trees here from the war.

      @AFHProjects@AFHProjects Жыл бұрын

    • @@AFHProjects 1111111

      @manuelaureliolagosespinoza5102@manuelaureliolagosespinoza5102 Жыл бұрын

  • Super die läuft ja wie eine neue

    @sieglindegotzfried6692@sieglindegotzfried66922 жыл бұрын

  • That is a great sawmill! I have never seen one like it in person, the pto power is a great way to go

    @DillonHFM@DillonHFM Жыл бұрын

    • It's old and rusty but I hope it works. I have no time to mill the logs yet, so much jobs with the excavator. But soon I hope.

      @AFHProjects@AFHProjects Жыл бұрын

    • @@AFHProjects I have the same problem, My old mill needs a lot of work, and It has been hard to get it done with everything else going on, never mind getting the footage edited and up on youtube

      @DillonHFM@DillonHFM Жыл бұрын

    • @@AFHProjects г

      @aleksandryakyshev@aleksandryakyshev Жыл бұрын

  • "I got dat zero clearance though." Thats a bad machine sir! Glad to see you are taking care of it.

    @uncletacosupreme7023@uncletacosupreme7023 Жыл бұрын

    • Why's that bad?

      @AFHProjects@AFHProjects Жыл бұрын

  • Your the first one i have seen to wear gloves when picking up the blade, good work 👍

    @mike-dq6wo6dg9o@mike-dq6wo6dg9o6 ай бұрын

  • Great job!

    @WoodworkingVietNam@WoodworkingVietNam6 ай бұрын

    • Thanks!

      @AFHProjects@AFHProjects6 ай бұрын

  • Ja super . neues Sägeblatt drauf und scheiße im Holz und Sägeblatt im Eimer . Stumpf . das Kenne ich auch in unserer Schreinerei . wir haben Vidis bestückte Sägeblätter und die sind richtig Teuer . wenn da son Bombensplitter im Holz ist , Wars das mit dem Sägeblatt.

    @batscher61@batscher612 жыл бұрын

  • I look at this video and can't help but wish I could get my hands on that old blade...

    @alaskanfrogman@alaskanfrogman2 ай бұрын

  • It’s also good that the splinter didn’t “fly”. Once upon a time my father and I were sawing up a pine tree; in that pine tree there was a splinter from that war. The saw caught a splinter and it flew towards his father. After this incident, I bought a metal detector and before cutting logs I always scan them for the presence of metal.

    @user-po2fx1cc4h@user-po2fx1cc4h6 ай бұрын

    • Yeah, I bought it as well. Thanks for watching!

      @AFHProjects@AFHProjects6 ай бұрын

  • Don't you just love the know-it-alls who are just dying to critique you, someone, anyone?

    @tomboyqueenX@tomboyqueenX Жыл бұрын

    • I was about to write the same thing. Everybody in the comment section is an “expert”. You should’a done this or that. My opinion is, that’s a fine old mill! Thanks for posting

      @eightapeach2861@eightapeach28613 ай бұрын

    • @eightapeach2861 Thanks for watching and commenting! Cheers!

      @AFHProjects@AFHProjects3 ай бұрын

  • I worked with TRIAGLE T CORPERATION for 18 years. We designed & patented the replaceable CARBIDE SPRING TOOTH sawblades. By 1989 appx 90% of the blades we made had been changed to INSERT BLADES & single carbide teeth can be changed out when damaged by shrapnel imbeded in wood. Blade over 4' are VERY TEMPERMENTAL & have to be releveled with hammer, anvils & English wheels to keep their FLEX/BREAK POINT PRESICE..

    @82lube@82lube Жыл бұрын

    • Nice! Yeah I let them hammered and maintenanced in shop. Thanks for the comment!

      @AFHProjects@AFHProjects Жыл бұрын

  • I really like what I see 😊

    @hyloward-gh6vj@hyloward-gh6vj Жыл бұрын

  • Great job.I am impressed with the machine and how he works. It looks very efficient. Thank you for bringing this video to me.

    @discoverykai1547@discoverykai1547 Жыл бұрын

    • Thanks for watching!

      @AFHProjects@AFHProjects Жыл бұрын

  • So wie ich lauf So geh ich auf. 😎

    @beakittelscherz5419@beakittelscherz5419 Жыл бұрын

  • Great job of lubricating the machine before operation?

    @chrisbailey459@chrisbailey459 Жыл бұрын

  • hi there nice up grade looks good john

    @fricknjeep@fricknjeep2 жыл бұрын

    • Thanks 👍

      @AFHProjects@AFHProjects2 жыл бұрын

  • I’d recommend removing the blade protection AFTER its installed on the shaft. Less chance of injury or damage to the teeth!

    @michaeld53@michaeld53 Жыл бұрын

    • Right!

      @AFHProjects@AFHProjects Жыл бұрын

    • Agreed,as,an observer ,but I can see myself ,so "involved "in things that I would overlook ..

      @SuperReznative@SuperReznative Жыл бұрын

  • I see the other review yer you need a hand held metal detector. Very nice saw I love these old saws.

    @martinscopes3914@martinscopes39148 күн бұрын

    • I have that. I also have videos out here where I find metal in logs. Thank you! Cheers!

      @AFHProjects@AFHProjects8 күн бұрын

  • Good👍🏻👍🏻💪🏻

    @kangkasbun1624@kangkasbun1624 Жыл бұрын

  • Wow mantap bro 👍

    @garengtutorial8923@garengtutorial8923 Жыл бұрын

  • Im sure there is less than a 10% chance of that blade flying off, but I like watching the video more than standing directly in that monsters line of fire.

    @Timothy-lb2vr@Timothy-lb2vr Жыл бұрын

  • Good video

    @ManhDoWoodShop@ManhDoWoodShop29 күн бұрын

    • Thanks!

      @AFHProjects@AFHProjects29 күн бұрын

  • Metallin paljastimella on hyvä käydä rungot läpi ennen sahausta

    @tubetuomo@tubetuomo2 жыл бұрын

  • Great to see that new blade working well but it's a pity that everything around it is rusty. Your next purchase should be a 5kg can of good grease and a grease gun. Put grease on and in everything that turns and moves especially pump grease into any grease nipples on all bearing housings if they have them. If any housings don't have grease nipples - install them. Dry bearings will become noisy and wear out quickly. Use your grease gun every day before you start the mill. Your nice shiny new blade needs a coat of paste wax to keep it from rusting and to make it cut easier.

    @1425race@1425race2 жыл бұрын

    • He has lubricated everything in an older video

      @scania1982@scania19822 жыл бұрын

    • Bearing bushes and small angle ball bearings need to be fully greased. But over-greasing rotating ball bearings is a great way to overheat and seize them.

      @davidelliott5843@davidelliott5843 Жыл бұрын

  • Mächtig gewaltig, Egon... 😊

    @friedhelm1615@friedhelm1615 Жыл бұрын

  • god job

    @patriciodejesuspatimorales4605@patriciodejesuspatimorales4605 Жыл бұрын

  • Great Video. Have you ever used a green line laser module to align the cut ?

    @ApinexCom@ApinexCom9 ай бұрын

    • No, I haven't

      @AFHProjects@AFHProjects9 ай бұрын

    • That’s actually our specialty. Most of our clients in the sawmill industry that operate the woodland mill or wood mizer use our green line laser module AGLL2 in a 20mw output power.@@AFHProjects

      @ApinexCom@ApinexCom9 ай бұрын

  • Worked on a mill like that back in 1973. All the teeth on the blade were removable.

    @tom-5792@tom-57922 ай бұрын

    • Yeah, these are not common in here. These teeths are changeable as well but in the shop. Thanks for watching and commenting!

      @AFHProjects@AFHProjects2 ай бұрын

    • ​Можно самому напоять. Медь, бура и горелка. Делов то!​@@AFHProjects

      @ayroyilalt@ayroyilaltАй бұрын

  • All that bare metal could benefit from a good soak in chainsaw bar oil. Thin it with paint thinners and spray it on. It gels quite quickly and really keeps the weather out.

    @davidelliott5843@davidelliott5843 Жыл бұрын

    • No deberia alinear con una pletina es mas sertero

      @janjovergar1921@janjovergar1921 Жыл бұрын

  • Any more videos of you running sawmill? GREAT videos restoring your mill👍🏼

    @CSWmanofsteel@CSWmanofsteel Жыл бұрын

    • Yes, you can find more. I have separate playlist for this sawmill

      @AFHProjects@AFHProjects Жыл бұрын

    • @@AFHProjects great thank you 🙏🏼

      @CSWmanofsteel@CSWmanofsteel Жыл бұрын

    • Thank you for visiting! Cheers!

      @AFHProjects@AFHProjects Жыл бұрын

  • Höllenmaschine...

    @sighardrichter888@sighardrichter888 Жыл бұрын

  • Good to see you working on the mill. I think I hear a noisy bearing and I see the carriage not traveling smoothly like some roller is a bit higher than the rest. Looks like you could use an Indexing Pin to set 2" and one at 4" at the far right so you could just push the log once to the pin and save a lot of time. Be well.

    @XLR8RRICK@XLR8RRICK2 жыл бұрын

    • Thanks! I mill different material. I just line up with the carriage ribs.

      @AFHProjects@AFHProjects2 жыл бұрын

    • I hear and see a bunch of things needing oil or grease!!

      @sotm2@sotm22 жыл бұрын

    • @@sotm2 It's greased. Just some rusty polts and nuts.

      @AFHProjects@AFHProjects2 жыл бұрын

    • Машина очень не экономная.

      @user-do7xn7bn8s@user-do7xn7bn8s Жыл бұрын

  • Waw good job xtreme👍👍👍

    @kereatifkaryaimajinasimesin@kereatifkaryaimajinasimesin Жыл бұрын

    • Thanks 👍

      @AFHProjects@AFHProjects Жыл бұрын

  • Почему-то мне кажется, что даже самодельная ленточная будет в разы дешевле и эффективнее

    @user-qn2kc4sn9o@user-qn2kc4sn9oАй бұрын

  • Pro tip: leave the tooth protector on the blade when installing incase you knock it. Pull it off after.

    @woodlandwrench@woodlandwrench Жыл бұрын

  • We used to spray them down with diesel, it works great as rust prevention, thats just surface rust.

    @RussMartin-us4mw@RussMartin-us4mw2 ай бұрын

    • Yeah, that works.

      @AFHProjects@AFHProjects2 ай бұрын

  • Sangat bagus

    @Sinarglondong@Sinarglondong10 ай бұрын

  • Это обыкновенная шпалорезка с приводом от ВОМ трактора.В России много таких было ,но с направляющими рельсами и кареткой.

    @user-wb3lb5bf6t@user-wb3lb5bf6t Жыл бұрын

  • Can a Gide or stop be fitted to the cut side so when you push the log too it will stop for you and then you will not need to adjust the back end of the log each time, good to see it al working for you, like all old things it will always need to be tinkered with ( worked on)

    @mikelskelley@mikelskelley2 жыл бұрын

    • Thank you! The spot is variable in location. It depends what is the cut with. I line up the cut with the carriage ribs. Just testing, but if real cuting will begin then I need at least 2 more men.

      @AFHProjects@AFHProjects2 жыл бұрын

    • I think the carriage has little raised stops built in you just have to push the log against them

      @mikewilliams2072@mikewilliams2072 Жыл бұрын

  • Оочень затратная лесопилка! Я видел, ребята пилили вековой дуб одной бензопилой!

    @vasiliymoraru851@vasiliymoraru851 Жыл бұрын

    • I saw a guys who sawing these old oaks with handsaw.

      @AFHProjects@AFHProjects Жыл бұрын

  • Oil,oil please oil. Like Bill Carson asking for water. I can hear the saw crying for it

    @RobertWilliams-mk8pl@RobertWilliams-mk8pl Жыл бұрын

  • Just a little point. When adjustjng the knife alignment at 3:00, you correctly used the straightedge along the blade and the knife's foot, but not along the blade to the knife's tip. A bit of a push and bend as you did is not the best way. Shimming under one side of the foot into best alignment is the better way.

    @thedolphin5428@thedolphin54282 ай бұрын

    • You have right! I just tried to align the blade with a log sled, but it's more accurate when align without the blade, just use the collar. Thanks for watching and commenting! Cheers!

      @AFHProjects@AFHProjects2 ай бұрын

  • О,и у нас в поселке в леспромхозе была подобная машина. Только диск на ней бы диаметром в 3 метра. А оператор сидел в будке обитой внутри мягким волоком в 5 см. Ее редко пускали, только тогда когда наберётся достаточно бревен диаметром от 1.0м и до 1,8м. Вот она гудела за километр ее было слышно. А раз диск сокочил и уехал за километр от станка. Правда там было немного под горку,но все заборы,с десяток,повалило и один сортир на двое раскроило. Но все живы и целы остались. На этом ее работа и закончилась. Да и так же вот как то на ставной/наборной пилораме дуб пилили и в нем кусок от снаряда(военный лес) и три пилы,новеньких дрык и зубьев как небывало.

    @user-Colhchim@user-Colhchim Жыл бұрын

  • I like the metal grid system on your trolley-carriage portion! What rpm is your tractor PTO?

    @toddavis8603@toddavis8603 Жыл бұрын

    • I used 540 rpms.

      @AFHProjects@AFHProjects Жыл бұрын

    • ​@@AFHProjectsValmet is very powered power plant.😁👍

      @romppaukko@romppaukko9 ай бұрын

  • No ei onneks menny hyvä puu pilalle.

    @ossisalminen1928@ossisalminen19282 жыл бұрын

    • kauheesti tulloo pintoja 😂

      @Korkkiproduction@Korkkiproduction2 жыл бұрын

    • Meni se siinä mielessä vähän huonosti, että tuli sivuvääriä lankkuja. Olisi pitänyt ottaa pelkka keskeltä. Ensin pinta pois, sitten 2" paksu sivusta, sitten 5 tai 6" pelkka.

      @Kaaransaha@Kaaransaha Жыл бұрын

    • @@Kaaransaha Tätä tarkoitinkin ,mutta tuo puu oli kuivanen ja halkeillut ettei siitä kunnollista tavaraa olisi tullut. Eli puu meni pilalle muttei ollut onneksi hyvä.

      @ossisalminen1928@ossisalminen1928 Жыл бұрын

  • Hallo brother salam kenal dari saya di Aceh

    @woodhunter2580@woodhunter2580 Жыл бұрын

  • Obviously because he knows being a woodworker it doesn't need to be pretty it just needs to work

    @gregcaspari5893@gregcaspari5893 Жыл бұрын

  • Хороший станок! Интересно. Каска спасет, если диск разлетится? 🤔

    @arzya13@arzya132 жыл бұрын

    • Хоть какой-то шанс

      @user-bb3gw7zx5e@user-bb3gw7zx5e2 жыл бұрын

    • Почему он должен ломаться?

      @AFHProjects@AFHProjects2 жыл бұрын

    • @@AFHProjects у знакомого есть пилорама дисковая. Как-то внутри дерева попался костыль железнодорожный(????). Бешеные обороты. Диск в осколки. Ранил знакомого в руку и ногу. У друга пилорама ленточная. Гвоздь кованый в дереве. Лента рвется, чудом не задев оператора

      @arzya13@arzya132 жыл бұрын

  • Man I'd spray down all those bolts and nuts with some oil!! That whole lill is in bad need of some oiling and greasing.

    @sotm2@sotm22 жыл бұрын

  • Your saw blade has a cup in it itwill spin straight only when it gets to designed speed the rating knife/splitter ans saw guide should only be adjusted to allow for the cupping

    @brianshields7137@brianshields71372 жыл бұрын

    • Yes, you have right. I know that but I did it still wrong way. :D Thanks for pointing it out. I will do that again without the blade.

      @AFHProjects@AFHProjects2 жыл бұрын

  • Is it likely you will find more shrapnel? Happy the blade seems undamaged. Keep these sawmill videos coming. I really find them interesting.

    @bobgrier3103@bobgrier31032 жыл бұрын

    • Yesh, we have lots of this kind of things in our woods.

      @AFHProjects@AFHProjects2 жыл бұрын

    • ​@@AFHProjectsYes... Near the eastern border from the IIWW.

      @romppaukko@romppaukko9 ай бұрын

  • ADD OIL EVEN THE OLD DRAIN OIL FROM THE TRACTORS MIXED WITH A LIL BIT OF DIESEL PAINT IT ON LET IT SOAK IN DON'T B (SCARED)

    @arthurn9237@arthurn9237 Жыл бұрын

  • Excelente trabajo!!!! ¿¿ no hay posibilidad de dotarles con un motor eléctrico????? Consume poco y más practico. 👍👍👍👍👍

    @arseniovera672@arseniovera672 Жыл бұрын

    • ¡Gracias! Todavía es posible. Pero no tenemos una corriente tan fuerte y conducirlos con un motor diesel es relativamente económico. Además, este barco de sierra se puede utilizar como móvil.

      @AFHProjects@AFHProjects Жыл бұрын

    • @@AFHProjects excelente respuesta. Muy complacidos y saludos desde las tierra de las cataratas arg .🇦🇷🇦🇷🇦🇷

      @arseniovera672@arseniovera672 Жыл бұрын

  • Ba anh maybach vlog Chào bạn....

    @baanhmaybachvlog7405@baanhmaybachvlog74052 жыл бұрын

  • gut, daß er immer mit der Hand schiebt, sonst würde die Maschine das nicht schaffen.

    @Niemals_Anal-lena@Niemals_Anal-lena Жыл бұрын

  • isoisäni oli saha-asettaja Kotkassa sotien aikana ja niiden jälkeen.

    @jan-erikwahlberg2791@jan-erikwahlberg2791 Жыл бұрын

  • Good God man it looks like your still living in the 70s

    @rayadams1312@rayadams1312 Жыл бұрын

    • Only machine in this video is the Valmet 872 forwarder made 76', other equipment is mutch newer.

      @AFHProjects@AFHProjects Жыл бұрын

    • They still exist, the good things. This machine doesn't need to be smart. No internet required.

      @mrmayfield5958@mrmayfield5958 Жыл бұрын

    • Yeah 😂 just two wires and the motor.

      @AFHProjects@AFHProjects Жыл бұрын

  • You have heard of grease and oil... Right...?? A well oiled and maintained machine prevents jams and lives.... especially with a blade that big

    @swanie_6448@swanie_64482 жыл бұрын

    • It is greased. The frame is just rusty.

      @AFHProjects@AFHProjects2 жыл бұрын

  • you should think about fitting a cooling system for the blade. good job

    @MrNoncredo@MrNoncredo2 жыл бұрын

    • A bottle with hole in cap? 😜

      @AFHProjects@AFHProjects2 жыл бұрын

  • 17:38 Immer die gerade Seite an die Führungsrollen !! War klar, dass das Blatt verkantet !!

    @Gospelsingles2000@Gospelsingles2000 Жыл бұрын

  • У нас по другому была подача бревна, стояла каретка с бревном ходила по рельсам.

    @user-vk7ze7kl7l@user-vk7ze7kl7l Жыл бұрын

  • This video had more twists than the wood on your sawmill

    @destroywoodusa@destroywoodusa19 күн бұрын

  • Απο ΕΛΛΑΔΑ ωραιο βιντεο !!!!!!ωραιο !!!!!!!!!

    @user-kg5kl6tv1v@user-kg5kl6tv1v Жыл бұрын

  • Seoraavaksi tarvitaan syöttöpöytä ja perämies :) EDIT: ja kierroksia lissää Valmettiin

    @petkarp1974@petkarp19742 жыл бұрын

    • Eikös syöttöpöytä oo puimakoneessa? Koljut puuttu, minkä päällä tukit, samaan tasoon pöydän kans, sit perämies +altaottaja. Yksinään kuntokävelyä. Ja pelkka keskeltä puuta. Jollei tuppeen sahata. Ja valluun kierroksia.

      @veijomarttinen4510@veijomarttinen45102 жыл бұрын

    • @@veijomarttinen4510 Näöttääkö tuo sinusta puimakonneelta? En tiiä mistä päen out van olkoot teijän kielellä mikä hyväjää. Luulisi tarkotuksen käöneen ilimi. Van teälläpä on vaekka minkälaesta viisastelijata. Nostelkoot käsin pöyvälle kalikat jos tuntuu

      @petkarp1974@petkarp19742 жыл бұрын

    • Vuan ku sirkkelilöessä ei oo syöttöpöytee. Koljut ne on . Olleet viimeset sata vuotta. Juottopöytä. ...männööpi se päevä noennii, - välilä käöpi konneela pölökyn nostamassa pöyväle. Ei näköjään oo isommin sahana.

      @veijomarttinen4510@veijomarttinen45102 жыл бұрын

    • @@veijomarttinen4510 Minä kaet sanon jo että olokoot mikä hyväjää, yks vitun maku. Pöyvälle oun nostellu oikeallakkii sahalla puuaotolla kalikat vuosikauvet ja raktorin mehtäkärryllä nostelin nii ikkään kenttäsirkulan pöyvälle lie viime viikolla viimeksi. Lopettaa sen jonnin joutavan ratkuttamisen.

      @petkarp1974@petkarp19742 жыл бұрын

  • ¿No debería apretar la tuerca del disco en el mismo sentido del giro?

    @vicentefernandez3930@vicentefernandez3930 Жыл бұрын

    • No, giraría solo mientras se corta. La tuerca debe apretarse contra la dirección de rotación del disco.

      @AFHProjects@AFHProjects Жыл бұрын

  • Life and adjustment would be a lot easier with a wire brush to clean the threads and a little grease on the threads and nuts?

    @graemefrost5861@graemefrost5861 Жыл бұрын

    • But I’ve always done it the hard way.

      @daleolson3506@daleolson3506 Жыл бұрын

    • If you always do what you always did, you'll always get what you always got.

      @graemefrost5861@graemefrost5861 Жыл бұрын

  • Amin semoga bermanfaat bagi semuanya semoga berjalan dengan lancar

    @Mahyarudinyardi141@Mahyarudinyardi14111 ай бұрын

    • If you have running sawmill in your countryside then you have a lot of friends. 😁

      @AFHProjects@AFHProjects11 ай бұрын

  • Надо делать очень чувствительны металлоискатель,и обследовать каждое бревно!

    @user-kc2gm8fk5o@user-kc2gm8fk5o Жыл бұрын

  • That's a very unusual mill.. doesn't look safe to me ..

    @Dan-ud8ob@Dan-ud8ob2 жыл бұрын

    • I haven't seen a safe mill. ut why are other mills safer than this?

      @AFHProjects@AFHProjects2 жыл бұрын

  • This operation is a marvel of efficiency compared to using a pit saw to cut lumber. And a modern sawmill is a marvel of efficiency compared to this operation.....

    @SeattlePioneer@SeattlePioneer Жыл бұрын

  • Judging buy the look of those saw teeth you have carbide bit soldered onto the saw. Have you considered bit and shank. Even though the kerf is wider you can change damaged teeth in a matter of a few minutes and be cutting again. Carbide requires diamond wheels. Bit and shank can be sharpened with a regular grinder stone.

    @danhunik7949@danhunik79493 ай бұрын

    • That's right. I have 4 blades, and I take them to shop for maintenance. Thanks for watching! Cheers!

      @AFHProjects@AFHProjects3 ай бұрын

  • Hejsan, du har gjort grymt jobb,en till svens klassiska sågverk är tillbaka i trafiken stort grattis. PS. Vem säljer såna riktiga klingor? Mvh Wojciech

    @wojciechpolak8482@wojciechpolak84822 жыл бұрын

    • Jag köpte skivan från LSAB. Det är ett måste i Sverige också

      @AFHProjects@AFHProjects2 жыл бұрын

  • Most dangerous sawmill I've ever seen in operation.

    @philslaton7302@philslaton7302 Жыл бұрын

  • Se vaara on aina olemassa että joko naula tai kranaatin sirpale

    @sakarihaapaniemi5460@sakarihaapaniemi5460 Жыл бұрын

  • Никогда не подставляй голову или части тела вдоль диска крутящегося даже болгарки, осколок полетит по траектории диска

    @user-zq6uh2js6i@user-zq6uh2js6i Жыл бұрын

  • Looks like a death 💀trap to me.

    @daveyhofer7926@daveyhofer79262 жыл бұрын

  • Is there a benefit from running this type of sawblade vs. The sawblades with replaceable shanks and teeth?

    @marfy3866@marfy3866 Жыл бұрын

    • I don't know. These types of teeths are replaceable aswell and this type of blades are common here. I haven't seen other types used here in Estonia. Older blades were not replaceable teeths, like my old blade.

      @AFHProjects@AFHProjects Жыл бұрын

  • That's why never cut wood without first checking the log with a metal detector

    @eisbeinGermany@eisbeinGermany Жыл бұрын
KZhead