KZhead
Тәжірибелік нұсқаулар және стиль

Restoration Pocket DOUBLE BARREL Gun

Screws And Tools
2024 ж. 21 Қаң.
36 483 Рет қаралды
Жүктеу

Hello! Today, the restoration of a french double-barreled pocket pistol. A sample of the mid-19th century. The condition is terrible, everything is rusty, the mechanisms do not work. But I will restore everything. This is an interesting project, but for a review. No functionality is required. The item is intended for a museum. I will remove the rust, fix the mechanisms and make a new handle. Let's go!
Firstly I put all the parts in a rust remover. The previous handle was most likely made of horn, but there was practically nothing left of it. After cleaning the metal parts, I washed everything and dried it. The remaining plaque was removed using a soft metal brush.
Next, I began to restore the barrel mechanism. (Apparently someone tried to brew everything roughly earlier, but it didn't work out). I removed the extra seams, sanded the parts, and removed the irregularities. Next, I prepared the surface of the future soldering sites and soldered everything with tin-lead solder. Everything is working fine.
The next mechanism is triggers. The condition is poor, rust and time have practically ruined a lot. I made two pairs of new springs because the old ones were broken.
The handle of the pocket pistol was made of dry beech wood. I covered it with stain and linseed oil. I applied some decor after assembly.
Furthermore, I did not do the test, because this ITEM IS INTENDED FOR VIEWING IN A MUSEUM.
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #pistol #restoration

Пікірлер

  • 7:00 приём! как можно было допустить мысль, что мы не читаем титры?! Возмутительно😂 Спасибо за видео👍

    @ogenmiller@ogenmiller3 ай бұрын

    • ))))

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

    • А сколько ж времени ушло на тот узел?)))

      @BeRuS1980@BeRuS19803 ай бұрын

    • я не хочу это вспоминать ((@@BeRuS1980

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • This channel is like a living fossil of KZhead's 2007 era where most channels were just straightforward videos of people doing stuff they loved doing. Nothing malicious, no malicious phone app plugs, no excessive hype, no diamond glitches. Just beautiful. PS - I was born near Rockford Illinois!

    @GetN3orGetOut@GetN3orGetOut3 ай бұрын

  • С почином с огнестрелом. В правильных руках всё оживёт. Лайк. P.S. А титры читаем. Спасибо.😊

    @user-jf7qp6eh3m@user-jf7qp6eh3m3 ай бұрын

  • Металл хорошо получилось восстановить. Даже механизм работает. Отличная работа! А вот про дерево говорить не стану, всё уже написали ранее.

    @user-cq7vs6ob3e@user-cq7vs6ob3e3 ай бұрын

  • Здравствуйте Алекс. С новым началом, с почином, так сказать вас. Непростая работа получилась. Спасибо за интересное видео. Кто скажет плохо пусть встанет рядом. И сделает так же😂

    @Alex27krsn@Alex27krsn3 ай бұрын

  • WOW. I LOVE KNIVES AN GUNS . GREAT JOB BIG GUY GREAT JOB

    @user-mc8eq7fm2z@user-mc8eq7fm2z3 ай бұрын

  • Да ладно, прям, старик))) мужчина в самом расцвете сил!😊

    @user-xh9xg6oh6o@user-xh9xg6oh6o3 ай бұрын

  • I recently found your channel, and you've now moved to restoring old guns, one of my favorite things to watch. I'm glad to have found your channel, and I think you did a good job with this gun!

    @blanklystaring9270@blanklystaring92703 ай бұрын

  • 13:46.. We know very well that you are very tired of renewing these beautiful weapons.. but in the end you create a new achievement for yourself.. be proud of yourself. You are not just renewing the weapons.. you are renewing our love for you after every clip❤

    @res_dkt@res_dkt3 ай бұрын

  • Very nice piece! The folding triggers and engraving indicate a gentleman’s dueling pistol possibly, kept in a pocket until needed. Beautiful piece of history

    @HickSquatch@HickSquatch3 ай бұрын

  • I have been restoring and repairing firearms for over 50 years, I don't believe I would have had the Moxie to tackle this one! GREAT JOB ALEX AS USUAL!

    @davidmorris4353@davidmorris43532 ай бұрын

    • Thanks for the feedback! This was my first restoration of such a weapon. To be honest, it was very difficult!

      @ScrewsAndTools@ScrewsAndTools2 ай бұрын

  • Well worth just under 15 min of my attention. That was a great effort and loved that you had to suss stuff out. Maybe consider, and spend another five years on it, trying to carve out recesses for the original handle. If you don't have anything else on, that is.

    @johnoconnor4941@johnoconnor49413 ай бұрын

  • It will always be the "most difficult challenge." Until you challenge yourself again. Then that's your next "most difficult challenge." Keep challenging yourself, my friend. It's how we grow. We're here to support your growth and are thankful you share it with us.

    @robkarnosh117@robkarnosh1173 ай бұрын

    • Hello, yes! You are absolutely right. When it is difficult and difficult and does not work out, there is an increase in experience and knowledge. Thanks

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • Ооо,отлично,я всё гадал будут ли когда то видео с рестоврацией огнестрелов). Молодец Алекс!

    @observer0395@observer03953 ай бұрын

  • Now you have graduated to gunsmithing. Granted that you didn’t try to restore it to full functionality (making or finding ammunition for it would be tricky and I would not want to fire it anyway) I still celebrate you deciding to restore its appearance and what functionality you could manage. Thank you nice again for sharing your struggle to learn and improve your skills, and showing us the tangible results of that struggle. Beep beep!

    @markfergerson2145@markfergerson21453 ай бұрын

  • For a first time restoration of a firearm, you did really well! Thank you for sharing this journey. I am happy your injury heals well. Looking forward to the next video.

    @Immortalaquarius@Immortalaquarius3 ай бұрын

  • Читаем!!!!😂 молоток, мастер! бип-бип

    @user-vi3bv2kb5e@user-vi3bv2kb5e3 ай бұрын

  • Beautiful restoration, well done friend! As for the # 5 on the parts, they labeled them so parts could be replaced quickly and easily in the field. Things break, but they can be repaired and put back into action.

    @Madlintelf@Madlintelf3 ай бұрын

  • Alex, you've leveled up to firearms. That looks like a tedious restorations but it looks fabulous as always. Great work.

    @ryanmedina5090@ryanmedina50903 ай бұрын

  • Прием. Здравствуйте. Спасибо за титры. Би-бип! Как всегда отличная работа! Очень интересная вещица 🙂👍🏻. Всем здоровья.

    @SU37BOB@SU37BOB3 ай бұрын

    • Благодарю!!

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • That was a nice change to see you accomplish this work on a firearm. Bravo!

    @RoninDosho@RoninDosho3 ай бұрын

  • 👏🏻👏🏻👏🏻 Another nice restoration, Sensei 🙏🏻. --- Gus, from Tucumán, Argentina.🇦🇷---

    @user-pt1ny4hs7m@user-pt1ny4hs7m2 ай бұрын

    • Thank you!

      @ScrewsAndTools@ScrewsAndTools2 ай бұрын

  • Good job, Alex. Very nice little pistol.

    @bertoldgies724@bertoldgies7243 ай бұрын

  • Спасибо за работу. Это самый "изящиный" пистолет, кторый доводилось видеть.

    @user-cn9ei9km6j@user-cn9ei9km6j3 ай бұрын

  • Видео отличное слов нет , талант от бога востонавливать вещи и давать им вторую жизнь. Ну наконец в конце дождался фирменное БИБИП. Титры читаю и это прекрасно.

    @alekseikovalenko3678@alekseikovalenko36783 ай бұрын

  • Beautiful job Alex, it will be a great addition to the museum!

    @jeffreyandreas7514@jeffreyandreas75143 ай бұрын

  • When I was a little boy a long time ago I was given a Pirate's double barreled pistol which i thought was wonderful. It was blue enamel with a gold pistol grip. It fired caps and i played Pirates with my brother. But yours is the real thing. How amazing to restore this piece. Beautiful. Congratulations!

    @timtaylor8406@timtaylor84063 ай бұрын

    • Hello! Thanks for feedback ^_^

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • Skvělá práce hezké video už se tesim na další 👍👍👍

    @miloslavtomek-cp3fh@miloslavtomek-cp3fh3 ай бұрын

  • Nice work i'm french and happy to see you working on this 😊

    @odalanus_863@odalanus_8633 ай бұрын

  • Wow! and what have you not done yet! The result was wonderful. thanks❤

    @funnymoments6988@funnymoments69883 ай бұрын

  • You are such a good craftsman and with such interesting projects. :)

    @timbryan9701@timbryan97013 ай бұрын

  • I knew you could do it, Alex! Great job!

    @ih8music@ih8music3 ай бұрын

  • You did a superb job restoring this gun!

    @jeromedangelo7028@jeromedangelo70283 ай бұрын

  • Цифра 5 это номер конкретно этого пистолета в восемнадцатом веке такие пистолеты делались в маленьких оружейных мастерских естественно без чёткой стандартизации и если у мастера заказ на 5 пистолетов то он метит все детали чтобы не перепутать при сборке .Металлическая часть у вас очень хороша а вот дерево тут не очень но конечно опыт дело тонкое.Не теряйте бодрости бип бип.

    @witchlive5579@witchlive55793 ай бұрын

  • This was a fascinating change of pace. Enjoyed this a lot and a good end result.

    @myersmoviemoments8751@myersmoviemoments87513 ай бұрын

  • Well done with this restoration! Impressive as usual.

    @gerryhuntman@gerryhuntman3 ай бұрын

  • Good job mister Screws beautiful restoration well done

    @vinceianni4026@vinceianni40263 ай бұрын

  • Excellent as always!

    @msk5410@msk54103 ай бұрын

  • GREAT JOB , I LOVE IT YOU TAKE CARE MY FRIEND

    @user-mc8eq7fm2z@user-mc8eq7fm2z2 ай бұрын

  • Это шедеврально. Мастеру аплодисменты. Бип-бип)))))

    @user-vy1vd3rk6l@user-vy1vd3rk6l3 ай бұрын

  • Very nice jobs it looks lovely thanks for sharing with us👍

    @alantan6255@alantan62553 ай бұрын

  • Wow, nice to see firearm restoration for the first time! Keep it up!

    @MrCrowski@MrCrowski3 ай бұрын

  • Beautifully done, Alex. I think that whoever you did this restoration for will be very pleased. It looks amazing.

    @brandenjackson3552@brandenjackson35523 ай бұрын

    • Thank you!

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • Экзотика!!!!!! Отличная работа!!!!

    @Nikogda_ne_sdavaisya@Nikogda_ne_sdavaisya2 ай бұрын

  • You did well Alex you have came along way my friend

    @williamlee8098@williamlee80983 ай бұрын

  • That certainly was a well earned "Beep beep", absolutely amazing restoration of that pistol, when you first showed it it looked like a .410 bore shot shell and when you finished I was convinced it was the same. Anyway thanks for sharing with us and best wishes from here in the UK.

    @jasoncampbell6222@jasoncampbell62223 ай бұрын

  • That was truly amazing, my friend! Beep! Beep! 👍

    @razorboyXVII@razorboyXVII3 ай бұрын

  • За дырявые перчатки отдельный ❤ ) сам в таких несколько ножей отковал и собрал а выкидывать перчаточки жалко😂

    @user-cc8vj2lt3e@user-cc8vj2lt3e3 ай бұрын

  • Man. What a piece of work ... clever job. Alex, thanks for all effort to make those videos. It's always a relief in my day to watch your work. Beep beep.

    @ledcrash@ledcrash3 ай бұрын

  • Каждый раз поражаюсь, как легко откручивают болтовые соединения на таких старых вещах))

    @ericcartman9416@ericcartman9416Ай бұрын

  • Hola buenas tarde bonito trabajo saludos

    @gerardopolvillo5999@gerardopolvillo59993 ай бұрын

  • Great job Alex i was sat there thinking TEST TIME HAS COME lol you are a jem mate keep up the good work

    @brianchester4218@brianchester42183 ай бұрын

  • Хорошая работа, Саша. Не без "чудес", но всё равно хорошая. Так ведь и не ошибается только тот, кто ничего не делает. В качестве экспоната, вполне себе пистолет. Реально видно как, что должно работать. Про рукоятку это отдельная песня. И её следует переделать. Понимаю, что устал, но надо))) Вот такая я язва)))

    @user-hc5oq4wl6h@user-hc5oq4wl6h3 ай бұрын

    • Доброе утро. Даже не хочу вспоминать это... Две пружинки меня просто выжали. От и до! И я рад он на следующий день уже был в музее)) Уж лучше ножны для шашки сделать два раза!

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • Master a beautiful restoration 🎉🎉🎉

    @tombarlow6176@tombarlow61763 ай бұрын

  • Very cool! Even if it never fires again, it's still a very sharp restoration.

    @samuelsiedschlag4486@samuelsiedschlag44863 ай бұрын

  • Very nice work Alex. I really enjoy watching you take on new projects. Keep up your good work, it is inspiring to me 👍

    @iand5057@iand50573 ай бұрын

  • Beautiful piece,it definitely needed your touch.love your attention to making the gun look like it was back in the day .great video as always.just keep doing what you do best.😎😎😎👍👍👍

    @tomswindler64@tomswindler643 ай бұрын

  • Really good job, and you had no experience in pin fire guns. Bravo my friend.

    @glockerbob@glockerbob3 ай бұрын

  • Очень интересный экспонат. Думаю если бы вы сделали тест, это могло бы плохо кончится...ствол может разорвать. Музей, это правильно.

    @arhiop3646@arhiop36463 ай бұрын

    • Он уже свое отгулял, пусть теперь чистенькой стоит на полке

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • Отличный результат , прекрасная работа . Спасибо

    @kir.il2794@kir.il27943 ай бұрын

  • Чтот новенькое!!!! Неплохо получилось. Спасибо за суб титры. Читаем. Как ВСЕГДА ЛАЙК!!! И комент для продвижения канала!!!!👍👍👍

    @user-vo5jv3gm5p@user-vo5jv3gm5p3 ай бұрын

  • Well done, sir!

    @serendipityforge333@serendipityforge3333 ай бұрын

  • Great job Alex!! This was a fun video...I could tell you were working very hard with this one 👍👍👍

    @coreyrowe2052@coreyrowe20523 ай бұрын

  • The restoration is beautiful and perfect 😃😃

    @MASI_forging@MASI_forging3 ай бұрын

  • Brillant work as always Alex! Beep beep

    @morrinsville23@morrinsville233 ай бұрын

  • уау , на стволы перешли ???!!! Гаумарджос , мой ДРУГ !!! Рад видеть ТЕБЯ !!!

    @Amiran_Ramalotti@Amiran_Ramalotti3 ай бұрын

  • Very nice work.

    @scottwallace4864@scottwallace48643 ай бұрын

  • Great job on the restoration barrel pinfire pocket pistol -1850 screws and tools 😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘

    @julienghanadan8311@julienghanadan83113 ай бұрын

  • You did well with that one

    @ashencrumbs@ashencrumbs3 ай бұрын

  • Well done! Especially considering how strange a weapon it was! I have seen a gun with folding triggers!

    @darrenfox5883@darrenfox58833 ай бұрын

  • Доброго времени суток, Алекс! Холодное оружие уже освоено, переходим на огнестрельное! 😉 Французский карманный пистоль, это ещё только начало. Вот когда друг начнёт приносить пушки, тогда будет сложнее или скорей тяжелее. Хорошая работа! Хоть и не привычная, но человеку свойственно развиваться. 👍

    @oleg_konovalov@oleg_konovalov3 ай бұрын

  • Круто получилось, да и разнообразие 👍

    @alex---alex@alex---alex3 ай бұрын

  • I knew you could do this project and you did an excellent job 👍👍💫

    @jonoa5560@jonoa55603 ай бұрын

    • Thank you! ^_^

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • Интересная реставрация. Итог получился на все 💯. Спасибо, лайк.

    @user-dz8dg6ey8g@user-dz8dg6ey8g3 ай бұрын

  • That was an interesting case, all things considered very nice.

    @pauldockins9635@pauldockins96353 ай бұрын

  • Really cool! I love these unique projects you work on - well done my friend!! Happy New Year to you and your family!

    @DJMarcO138@DJMarcO1383 ай бұрын

  • Great work nice job

    @stephenbriskin9@stephenbriskin93 ай бұрын

  • Меня возмутило только одно слово в этом видео: старик! Старик?! 🤨😲Да Вы ещё всем фору дадите!! Спасибо Вам за прекрасное видео и точные впечатления от просмотра каждой "серии сего сериала" 😊😅. С приветом из России

    @yakovika.1448@yakovika.14483 ай бұрын

    • Порой так... ибо повзрослеть пришлось крайне рано :)

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • Another impressive job. BeeBeep indeed!

    @ericfg806@ericfg8063 ай бұрын

  • I dont think thats a pinfire it looks like an old black powder centerfire but its still pretty cool

    @joemorganeatmyshortschannel@joemorganeatmyshortschannel3 ай бұрын

  • Алекс, сложный - не значит не выполнимый.👍👍👍🤝🤝

    @user-ju9td8ue4b@user-ju9td8ue4b3 ай бұрын

  • Рукоятка классная!👍

    @user-ef4lt8hg5l@user-ef4lt8hg5l3 ай бұрын

  • good project my friend

    @shimoda567@shimoda5673 ай бұрын

  • Very good work, especially new flat springs. Fortunately you picked a period piece before there was any real stadardization/mass production, that means all parts were unique and one of a kind. That means restoration can be made without worry about exact copying. Again good work.

    @OldGrayCzechWolf@OldGrayCzechWolf3 ай бұрын

    • Thank you for feedback ^_^

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • Very nice job congrats

    @armadagunshow@armadagunshow3 ай бұрын

  • О, разнообразие, это всегда хорошо!!!👍

    @soll9207@soll92073 ай бұрын

  • История сохранена, БРАВО!!!👍👍👍

    @user-iz8tc9lp2s@user-iz8tc9lp2s3 ай бұрын

  • Eccezionale! Luca, Italy.

    @user-iv1sn9qg5k@user-iv1sn9qg5k3 ай бұрын

  • Beep beep much love from San antonio Texas love your videos brother

    @Lopezfam210@Lopezfam2103 ай бұрын

    • Thank you!!!

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • Проверка связи с субтитров:D Гром аппарат - зачёт, лайс поставил.

    @alejosanchez9406@alejosanchez94063 ай бұрын

  • communication check response, yes I read the subtitles lol, and you could have used the saw blade for the spring, just a case of annealing it first and then doing your wok and heat treating it again to harden it before a tempering session, worth looking at some video's about how to heat treat steels

    @andyc750@andyc7503 ай бұрын

  • Хорошо получилось. Сил затрачено было не мало.

    @zelehbi7957@zelehbi79573 ай бұрын

  • Very nice . Well done and best regards alex.😎🇬🇧

    @tonygrimes4125@tonygrimes41253 ай бұрын

    • ^_^ very kindly, thanks

      @ScrewsAndTools@ScrewsAndTools3 ай бұрын

  • Amazing result👍. It looks like it was a real weapon maybe carried by a wealthy merchant; a mini shotgun but the firing pins, springs and sears are too far gone. At one point I thought you were going to use the remains of the old grip to make bone inlays on the new grip.

    @steveh7823@steveh78233 ай бұрын

  • Nis respetos estimado Señor, aunque debería verse también la zona de los percutores, lo menos que se pude decir es que es un magnifico trabajo. Un detallíto: es un arma "centerfire" y no "pinfire" (Lefacheaux System).Gracias totales por el video y la mejor de las suertes para Ud.👍🔫🛠🤩

    @mr.brasskutt5385@mr.brasskutt53853 ай бұрын

  • This was great and entertaining video 😄. I remember watching the gun barrel video, and wondering if you'd do a full gun restoration ever. It was funny how every time you tried to do something, you'd find another small piece 😆. Will you try another gun restoration anytime soon, I wonder? 😅 It came out looking great 👍

    @TheTrueBobDole@TheTrueBobDole3 ай бұрын

  • Great works of restauration, but for this emblematic gun you must do an similar Colt handle, like the Metabaron's gun..

    @stephanevelia7032@stephanevelia70323 ай бұрын

  • Прекрасное изделие было, прекрасное изделие стало.

    @vadimlysov6467@vadimlysov64673 ай бұрын

  • Спасибо за видео. Конечно читаем субтитры )

    @SuperPuperPumba@SuperPuperPumba3 ай бұрын

  • Приветствую, по-моему очень не плохо получилось. Вы же восстанавливали как музейный экспонат, а не боевое оружие. Тем более боевое из той груды металла навряд ли бы получилось 😊 легче было сделать новое по образцу👍

    @Andrei-1973.@Andrei-1973.3 ай бұрын
KZhead