0040-31 D, KL-0174..Series, KL-0042-91 K Wheel Bearing replacement
2012 ж. 19 Қыр.
7 109 185 Рет қаралды
Suitable for VW - Audi, Ford, Opel/Vauxhall, Seat and Skoda e.g. Audi A3, A4, A6; VW Golf IV, Passat, Sharan, T4 etc.
KL-0174-5 A -- Puller Set for wheel hubs, brake-drums and full floating axles
Suitable for VW - Audi, BMW, Ford, Honda, Mercedes, Mitsubishi, Nissan, Opel, Renault, Seat, Skoda and Toyota.
KL-0042-91 K - Inner Bearing Race Puller Set
Universally suitable for vehicles with inner bearing race-Ø of from 48 mm up to 56 mm, e.g. VW-Audi, Ford, Lancia, Renault, Seat, Škoda, etc.
Professional and calmest mechanic i've ever seen, brilliant.
Your work&expertise highly appreciated.. Precision in every touch u made it George, Great, hats of u dear..👍💪
Felicitări pentru aceasta prezentare succes.
Lovely job! Nice tools
This is beautiful work process, thank you.
Perfect 👍🏻👏🏼
Damn that was super smooth great tutorial!
Proper tools, Good.
One of the best video’s I’ve seen, thanks!
Absolut e very good
So professional!!!
Nice tools, where can I buy it?
Gracias
Good
Ur way looks easiest tho bravo!!
👍👍
Top 👍
Awesome tool set. Does Gedore make that wheel hub clamp tool? To keep the hub from spinning? Very cool.
👍👍👌
👍🌹
Bela cosa complimenti
👌😎🤨🤨
😁👍👍👍
Well, that was an easy job :-) We all have those tools to hand don't we? Never seen a mechanic with such clean hands.
Good
I think its better turn around disk when putting the hub on.to ensure you touch the inner race perfectly, the race extender is awsome , mayby can be used on a lathe as well...most tools can be self made. bottle jack.blind flange, spindle old scissor jack a.s.o. thanks for showing. goedendag
This was great - like watching Barry White replace a wheel bearing - no lyrics, but the poetry of the right tools=right job were lyrics enough! #beautiful #gonnahavetotakeminetothepress #stillgotsomegoodpointers
This was great - like watching Barry White replace a wheel bearing - no lyrics, but the poetry of the right tools=right job were lyrics enough! #beautiful #gonnahavetotakeminetothepress #stillgotsomegoodpointers
Top comment of 2014, hands-down.
The best way to change the front bumper was done well
Looks so easy!!!!! This guy's hands are not even dirty.
Very informative and well done
Nice job brother
YOU ARE REALY GOOD NICE TOOLS YOU THE MAN, THANKS FOR THE VIDEO!
Excepțional. Super OK.
beautiful work👍👍
que buen equipo de herramienta automotriz. saludos
why do I feel like there should be a huge safe you are trying to crack open and steel all the money, LOL - great music
Nice. Thanks
that is the right way to do job right. you have no chance to damage any parts as those tools are designed to be fail safe. also keep you safe as well. safety first,use correct tools always.
it stops being safe when you drop one of them on the foot, it looks heavy
Fantastic quality job, unlikely to find a garage that would do it so professionally, as the tools used look very expensive. Putting the bearing in correctly will mean it will not fail prematurely. Look how clean his hands are in such a mucky area, is he made of Teflon?
nice tool
Can not believe how clean his hands are wooo haa..
Hmmm... when I took the knuckle of my 9 year old Getz all I had to do to get the driveshaft out was tap it with a hammer a few times and pull. How well does it work if you've snapped a wheel stud on the hub?
what is the force used to tighten the bearing bolt?
This is awesome! This is what happens when you ask an engineer to do something haha. I'd be there wailing on something with a bigger hammer. Bravo sirs!
Falta solo la herramienta y manos a la obra, gracias
great
you need to see east european style with torch and hammer :D
omg slavic auto shop channel would go viral
Nice yar
Nice tools. I bet it's expensive. I stick to my cheap HF tools, it does the job done too 😁
Boa noite,esse kit está disponível no Brasil? Obrigado.
THIS IS MY SONG BRAHHH!
no way you can do it this easily without mustache.
the most scary part is to push the cv axle in. most people use hammer to do it. sometimes if you push too far in you might end up replacing rear diff.
That tool is boss
Good
very good but expensive :)
้ถ้ามีเครื่องมือพร้อม เปลี่ยนง่ายๆอย่างหมูเลย
👍
wow
Only tool i liked was the one for removing the bearing race, another 2 bolts and a nut on the steering arm the whole thing is off the car and can be put in a hydraulic press.............
Don de puedo comprar las herramientas en colombiano..que muestran en el vídeo gracias Alfredo
just buy the hub assembly, this is crazy!
all of this just to pull the axle ?!
Curti e compartilha
This is the only mechanic I know who can do a full wheel bearing tear down and reassembly without touching the existing part or getting his hands dirty.. I'm sure he gets dirty in other ways, especially if this is the kind of shop music he prefers... just wow... Is this why they charge you an hour labor? I could do this by hand in 30 mins or less!
i like it, but may be tool is too expensive for weekend car repair guy..
with the proper tools any body can do that Shalom Peace
Forgot to show how easy it was to get the lower ball joint separated Not been down the road many times
donde lo puedo comprar
Ese mecanico debe tener otro empleo de tiempo parcial para poder comprar esas herramientas tan caras, porque con el tiempo que tarda para hacer el trabajo no creo que gane lo suficiente para comprarlas.
Good !
How much? Where can someone get it?
Love the porn music. Makes everyone want to watch what im watching. And feel sorry for the people who actually think they need to spend all that money on those stupid tools they don't really need lmao!!! Thanks for making me want to really do this on my own you guys are the best!!!!
how can i get it... hoe much is it thanks
anyone knows the name of this tools
Of course its a demonstration film, but nothing was cleaned or lubricated, if someone thinks that its DIY, believe me its not the greatest one
Where can I buy this tool. That is epic.
where can I but the tool here in south africa,live limpopo
Is here selling tools?
Так не интересно. Челябинские мужики поймут 😐
Hi dear I want this tools what is price
Alat yang bagus. Harganya berapa ?
right at the end he realizes that he was supposed to do the left rear wheel bearing...errrg!
beaucoup de temps
Good
ok
Mega filmik 😀👍 Like Zapraszamy do nas 🌹👍
Mais fácil e rápido tirar a manga de eixo e levar na prensa...
Damn, where to buy one of those? But i beat they are really expensive, since if you read on the tools all of them are "made in Germany"...
All german tools are high because they are the best tools in the world
sure they are, i benn trying to buy german stuff since i got tired to curse chinese
IT'S ONLY 5000 BUCKS DELIVERED
Why was it such a production to push out then pull back the CV shaft? 10 sec with an air hammer, out, push it back in by hand, another 10 sec.
I know, wtf. You gonna buy a $500 tool for that? That's noob status.
i want this tool
It would have been faster to take the knuckle off and press the bearing out.
thats exactly what i was thinking when i was watching this!
yes on this car you are right there but on a c class its a nightmare lol
And a WHOLE lot cheaper
I will just pop out and buy the £5000 worth of kit used in the vid. Thanks guys.
No wonder labor is getting more expensive because they use over engineered tools in the video. I have seen all the mechanics using impact to remove axle nuts. And and very last the guy used the impact and the most unreliable torque stick to install wheel back. That is called German engineering.
A little problem there: He didn't use the torque tool on the wheel bolts. I'm sure that there is a torque specification on wheels bolts.
He is using a torque stick. Manufactured at a preset torque for a particular car. They are german, wont miss a thing!
Super sketchy 70's porn with the stache that guy is rockin. I had the exact same thought...
с таким набором почему бы и не работать
Т Л абсолютно согласен. Знать бы сколько стоит эта чудо техника
citroen galini guoli pakeisti
A lot of unecessary tools used here. Waste of money. Just pound the axle out with a brass punch, nothing is gonna happen to it. Use a OTC slide hammer instead. Engineers provide this method so that the company doesn't get sued. Take the knuckle off and take it to the press.