How to Make Propeller Led Clock Using Arduino Nano | POV Display
2021 ж. 23 Мау.
41 819 Рет қаралды
Click for circuit diagram and arduino code
drive.google.com/drive/folder...
Click for circuit diagram and arduino code
drive.google.com/drive/folder...
Your watch looks great! Respect for the work done!
Thanks for this wonderful project. Keep up the good work.
Awesome dude I will try definitely
Really awesome 👏
Very nice👍
I soldered wires to the winding connections inside a brushed DC motor and fed them through the front of the motor along the motor shaft, I took out the shaft "bearing" and mounted a new gearing outside which has a bigger hole. Then I used a silicon tube to space around the shaft and wires, through the Bearing hole. That way I was able to power the PCB. I used diodes to rectify the power, with a suitable smoothing cap.
This is just awesome
Best video sir
Nice video
Nice 👏👏👏👏👏
Great video!!
Nice idea
Excelente.
What type of engine do you use? Do you have a link where I could buy such an engine?
Super
Very good
Good Video
good 👍
Nice👍👍
can u change to a personalized drawing or video pov display?
Thank you sir
The LED1 will start from outside or inside of the propeller ...?
Good
good
عالی
Ready
Прикольно
de cuantas RPM es el motor ??
It is 12 hours clock?
Can u please help me build this projects..I want to purchase it with code explanation.
how can i make it display different patterns and text
What is the size of pcb board???
dear friend, very good, I want to make it, I saw full video and see schematic diagram, but how can we adjust the time at present time there is not define, please tell me
There seems to be alot left out
friend you can share the code and where do I get that swivel step
Code and circuit on description
Please update this clock with rtc module and time changing feature
Drive link doesn't work buddy can you please check
Bro were is Arduino program code and how to reset time tell man or mention it then only it will be a perfect video
Given in the description
How can change the time?
can someone HELP ME please. I did all the steps and everything work accordingly( WHEN IS CONNECT TO THE USB where I used to upload the code). However, when I use any external power supply ( battery 9v-7v- 6V-5.5v ETC) IT doesnt work. ALL THE LIGHTS START blinking randomly and when I use the magnet close to the HALL SENSOR, there is no effect at all. once I plug it back to the usb, magically works perfect. Do I need to use the exactly same battery ? 3.7v 500maAh ? can someone help me please. How can I make it work using a BATTERY?
Çalıştırabildin mi? Bende yapıyorum aynısını ama mıknatıs tutunca tepki vermiyor. Sadece en üstteki ve en alttaki Led sürekli yanıyor. Burada yapılan işlem, hall sensör sağ ve sol bacağına 10K direnç bağlamış. Ama şemada 10K direnci sol ve orta bacağa bağlamış.🤔
Boost step up converter
Please tell me how to programming ?
Aap ka name kiyaa hai
This is a very good but please give me the code
Your aurdino program is not available plss resend again
Bro your arudino code is not available pls share again
Bro components details sand pandragigala
Sir how to set time
Alguien sabe los componentes por favor
1st
Link not open
Motor rpm
Bro code is not uploading
2st
3st
Please tell me how to programming ?
.