KZhead
Ғылым және технология

Most powerful 2000W handheld cleaning laser [4K compilation]

Narran Laser
2021 ж. 6 Шіл.
21 971 140 Рет қаралды
Жүктеу

Meet the world's most powerful handheld mobile cleaning laser - Narran ROD 2000W, a powerful laser that can truly accomplish anything when it comes to cleaning, surface treatment, coating, paint, oxidation removal and still doesn't damage the base material at all. Even with lower power, the laser can easily accomplish great cleaning achievements and take care of rust, grease, oxidation, paint, and much more. Did you like the results or have any questions? let us know in the comments!
About laser cleaning:
Laser cleaning uses concentrated laser radiation to evaporate impurities from the layer. The impurities are affected by ultra-short laser pulses (ns), which generate heat and heat-induced pressure - the high temperature inside the material creates a high pressure that causes it to evaporate.
Almost no waste material is generated during laser cleaning, because most of the impurities evaporate, thanks to the high efficiency of the laser resonators used, the cleaning process has very low operating costs. Laser cleaning is a non-contact, non-abrasive method that is very gentle on the surface of the material. Since the course of the interaction of laser radiation with the material depends on the material, it is possible to set the cleaning parameters so that the substrate remains undamaged after cleaning.
About us:
Narran is a direct Czech manufacturer of laser cleaning systems. Depending on the needs of the application, we can design and integrate the laser into production lines, build a robotic workplace or supply a portable mobile laser for a wide range of applications.
Thanks, everyone for watching!
If you want to see more laser cleaning and various applications, please, follow us on social media and help us spread this awesome technology! We are a company with a big passion for laser technology.
Follow us on social media:
Web - narran.cz/en/application/lase...
LinkedIn - / narran
Instagram - / lasercleaning
Facebook - / narran2013
Reddit - / narranlas. .
The laser used in the video - narran.cz/en/product/rod-lase...
Thank you, we appreciate it!
#laser​​​ #lasercleaning​​​ #tech​​​ #technology​​​ #engineering​​​ #restoration

Пікірлер

  • Stood amazed while on holiday in Tenerife while a bloke did this the the grubby pavement outside a cafe, stunning. Not a single warning notice, cone or anything resembling a safety procedure in place, and he was piggybacked onto a street light for his electric supply.

    @cypeman8037@cypeman80378 ай бұрын

    • We absolutely understand you. We always provide both safety training and safety equipment with each unit we sell, this training includes ways to deal with safety including scenarios while working in environments where other people are present. We provide all the necessary safety tools, such as protective barriers, goggles, curtains, special filters and so on. Needless to say, we are very strict regarding safety and compliance with laws in that matter - We frequently organize/provide laser safety training for other companies and we have a department focusing solely on the laser safety topic. Some people however, do not care about safety of theirs or others regardless of the possible dangers and there is nothing that can be done other than reporting them to the law enforcement. We are frequently beyond amazed seeing people in videos using class IV. laser systems without such a basic elementary safety equipment such as laser goggles. With that being said, none of our customers is from Tenerife/we haven't shipped any laser system to Tenerife, so it is likely someone purchasing a laser system from other company that is not being that thorough regarding laser safety, if they even touch that topic.

      @NarranCzlaser@NarranCzlaser8 ай бұрын

    • Got it though.

      @johnnytwotimez@johnnytwotimezАй бұрын

    • Where to buy? Name model brand etc ???

      @yasirjabbar7847@yasirjabbar7847Ай бұрын

  • Lovely. No overly loud music. No BS. Just footage and sound of a guy cleaning equipment with a laser.

    @NodDisciple1@NodDisciple1 Жыл бұрын

    • The intense electric field of the laser moves the dirt out.

      @jlo13800@jlo1380012 күн бұрын

  • I've literally spent thousands of hours cleaning motorcycle and car parts. If I had this equipment I could have been at the beach drinking beer and throwing empty cans at people.

    @JorgenLarsson@JorgenLarsson2 жыл бұрын

    • "Work hard, not smart!" - Jorgen

      @mikakorhonen5715@mikakorhonen57152 жыл бұрын

    • And you'll spend thousands of hours paying off the electric bills

      @JD-ml7cg@JD-ml7cg2 жыл бұрын

    • That sure beats using brake cleaner and a brush

      @raymondclark1785@raymondclark17852 жыл бұрын

    • @@JD-ml7cg Its only 2000w about the same as a fan heater.

      @dansmith2863@dansmith28632 жыл бұрын

    • You can pick one up with half the power for about $10,000.

      @righty-o3585@righty-o35852 жыл бұрын

  • I love this post. I showed this post to my family & they also loved this post.we bought a projector & showed this post to the whole neighborhood & they also loved this post. Our lives have changed because of this post. We are grateful to you for this post,Thank you so much for this post.

    @timgannon2993@timgannon29935 ай бұрын

  • That is totally freaking awesome. I want one!! Great video. 👍

    @commentsedited@commentsedited2 жыл бұрын

  • I've always wanted one of these...just didn't know till just now

    @NoFuqsGiven@NoFuqsGiven2 жыл бұрын

    • Definitely buying one if i can find it. And i don't need it either ( right now🤣)

      @violetspider_@violetspider_2 жыл бұрын

    • @@violetspider_ I definitely need it, just wonder if we can afford it?? 😲💥😂🤔

      @johnstephens7697@johnstephens76972 жыл бұрын

    • @@johnstephens7697 yeah, might be 20.000 or something like that.

      @violetspider_@violetspider_2 жыл бұрын

    • I don’t have enough electricity for it, but I will make a human hamster wheel generator for it! 🤪

      @khakalaka7560@khakalaka75602 жыл бұрын

    • Ikr?

      @emmittbishop4783@emmittbishop47832 жыл бұрын

  • As a mechanic, I could watch this all day. I must have one!

    @mycoolwill7594@mycoolwill75942 жыл бұрын

    • Im not a mechanic but i can watch it all day too))

      @laynetravis@laynetravis2 жыл бұрын

    • @E Double also how to not go blind when a ray bounces sideways a bunch of times and ends up in your eyes

      @zermati@zermati2 жыл бұрын

    • @@ButterfatFarms I definitely don't have access to one, and no idea how to use it safely either. Are you ok ?

      @zermati@zermati2 жыл бұрын

    • Puts a hotsy engine cleaner to shame

      @lizziswane4632@lizziswane46322 жыл бұрын

    • 40k $

      @JbrayxD@JbrayxD2 жыл бұрын

  • A cada dia que passa nos surpreendemos com tecnologias inimagináveis !!! Que show de aparelho !!!! Muito bom !!

    @silveriooliveira4776@silveriooliveira47762 жыл бұрын

    • Muito bom e muito caro... ADG da hightorque tem um... Pagou 200 pica-paus...

      @Rodrigo_R.Vieira@Rodrigo_R.Vieira Жыл бұрын

    • @@Rodrigo_R.Vieira 200 Pica-paus ??? Isso é crime por explorar a fauna !!!!🤣😂😂🤣😂😂🤣🤣🤣🤣

      @silveriooliveira4776@silveriooliveira4776 Жыл бұрын

    • @@silveriooliveira4776 kkkkkk 200mil reais... Que deve ser equivalente a 200 pica-paus... 😅

      @Rodrigo_R.Vieira@Rodrigo_R.Vieira Жыл бұрын

    • @@Rodrigo_R.Vieira Brincadeira amigo !!!! Entendi. Obrigado pela atenção. Mas foi engraçado !!🤣🤣😂😂🤣🤣

      @silveriooliveira4776@silveriooliveira4776 Жыл бұрын

  • Я думаю такую тему хотел бы иметь каждый, у себя в гараже 👍👍👍👍👍

    @user-wd2on9ey5t@user-wd2on9ey5t2 жыл бұрын

    • Эта штукенция дороже гаража с машиной вместе взятых

      @user-yv3nu8gj8l@user-yv3nu8gj8l2 жыл бұрын

    • Эта штукенция дороже гаража с машиной вместе взятых

      @user-yv3nu8gj8l@user-yv3nu8gj8l2 жыл бұрын

    • Можно бы и заиметь! & Сколько ж надо зелени на эту чюдо технику.

      @user-dw4ck2xy5o@user-dw4ck2xy5o2 жыл бұрын

    • Когда нибудь на каждой автомойке так моторы мыть будут)))

      @user-so6tk1rq4u@user-so6tk1rq4u2 жыл бұрын

    • @@user-dw4ck2xy5o , подскажите, как называется и где купить?

      @user-zg7ku8cn7z@user-zg7ku8cn7z2 жыл бұрын

  • I need this for the kitchen after I’m done cooking.

    @innerjon@innerjon2 жыл бұрын

    • Good

      @sergijmakarenko5271@sergijmakarenko52712 жыл бұрын

    • Will be good to clean camp ovens

      @trumbydownunder750@trumbydownunder7502 жыл бұрын

    • It's not a toy, it's dangerous.

      @ykd0011@ykd00112 жыл бұрын

    • @@ykd0011 no shit Sherlock

      @gallopintojacinto@gallopintojacinto2 жыл бұрын

    • Burning the house down for insurance money eh?

      @huggybear2789@huggybear27892 жыл бұрын

  • This is the coolest new technology I've seen in a quite a while.

    @ahobimo732@ahobimo7322 жыл бұрын

  • Завораживает. Невозможно оторваться от просмотра! ) Это колдовство!

    @vsioslihkom3363@vsioslihkom3363 Жыл бұрын

    • Колдунство

      @curce1@curce1 Жыл бұрын

    • Ведьмовство

      @Rainkonen43@Rainkonen43 Жыл бұрын

    • Ведунство

      @ilbrutto88@ilbrutto88 Жыл бұрын

    • Кумовство!

      @slavensss4793@slavensss4793Ай бұрын

    • вуду пийпл

      @BrojhmFosovich-xw8xi@BrojhmFosovich-xw8xiАй бұрын

  • Аппарат называется мечта прекупов. Берём запчасти с разбора очищаем и продаем как новые

    @user-kv9jt9pm7q@user-kv9jt9pm7q2 жыл бұрын

    • Аппарат называется мечта прекупов. Берём запчасти с разбора очищаем и продаем как новые

      @NarranCzlaser@NarranCzlaser2 жыл бұрын

    • У знакомых с металлоприемки несколько лет человек забирает редуктора, рулевые рейки/колонки и т. п. теперь понятно зачем...

      @tasuja7761@tasuja77612 жыл бұрын

    • @@tasuja7761 цена аппарата $50к+ не думаю что такое по карману реставратору реек.

      @user-sp7nx8sr7c@user-sp7nx8sr7c2 жыл бұрын

    • За такую сумму он нафиг никому не нужен

      @Shamil..@Shamil..2 жыл бұрын

    • @@Shamil.. через год рынок наводится такими аппаратами и стоить он будет как сварочный аппарат

      @user-bz7bv6nh8d@user-bz7bv6nh8d2 жыл бұрын

  • Now this is something that NEEDS to be filmed in UHD Slow Motion, would be awesome to see it really slowed down with a high speed camera!

    @94Greenbean@94Greenbean2 жыл бұрын

    • We do have that on to-do list!

      @NarranCzlaser@NarranCzlaser2 жыл бұрын

    • Hell yeah!

      @zerolash406@zerolash4062 жыл бұрын

    • @@NarranCzlaser Где можно преобрести?

      @user-mz6fl2oq9q@user-mz6fl2oq9q2 жыл бұрын

    • @@NarranCzlaser How much is one of these and how can I purchase one for myself since I build Engines for Vintage Muscle Cars and Street Race

      @RichardMLowe@RichardMLowe2 жыл бұрын

    • @@NarranCzlaser This is the perfect ASMR video for mechanics lol

      @stealthisdkey@stealthisdkey2 жыл бұрын

  • THIS IS AMAZING

    @dabig_guy2204@dabig_guy22048 ай бұрын

  • This is like water jet road cleaning, but with LAZERZ!! 😃 Too satisfying 😍

    @thelazy0ne@thelazy0ne2 жыл бұрын

  • "Oh waiter, my steak is too raw, take it back." "Sir, put on these glasses for a moment."

    @rushfan9thcmd@rushfan9thcmd2 жыл бұрын

    • 😹🤣😹🤣

      @razorjoe4729@razorjoe47292 жыл бұрын

  • I work with high powered lasers up to 20 kilowatts. We're getting a machine used for surface activation, a pulsed pico laser which is used as an alternative for grit blasting. Advancements in the laser field are getting really interesting! Great video!

    @patrickspapens5497@patrickspapens54972 жыл бұрын

    • People say "oh _____ is the future, or that is the future" the future is lasers:)

      @69uremum@69uremum2 жыл бұрын

    • Добрый день! Можете снять видео как работает пиколазер?

      @user-uq1oz5gb1k@user-uq1oz5gb1k2 жыл бұрын

    • Alien technology

      @trevorgwelch7412@trevorgwelch74122 жыл бұрын

    • How much are these

      @Samfromauckland@Samfromauckland2 жыл бұрын

    • @@Samfromauckland you mean in price?

      @patrickspapens5497@patrickspapens54972 жыл бұрын

  • Satisfying to watch, feel like no rust would be safe anywhere near me.

    @murb2586@murb25868 ай бұрын

  • Now this has to be the most satisfying video out there, I gotta get one and some rusty parts

    @Jason-dr6se@Jason-dr6se2 жыл бұрын

  • This is so enormously therapeutic to watch. I bet whoever does this for a living loves doing it.

    @NCXDesigns@NCXDesigns2 жыл бұрын

    • It's what artist painters feel about painting (even without lasers). You should try it, if you like it so much.... You must satisfy the unknown painter in yourself !

      @vivianvaldi7871@vivianvaldi787110 ай бұрын

  • Сколько сейчас появится "новых" запасных частей для машин и техники.

    @toliangoletc9539@toliangoletc95392 жыл бұрын

    • Check the tolerance on the holes and stuff

      @lorenzovonmatterhorn4756@lorenzovonmatterhorn47562 жыл бұрын

    • Диля жилеза сколько стоить это аппарат

      @user-yu5vl1hm6e@user-yu5vl1hm6e2 жыл бұрын

    • @@user-yu5vl1hm6e сто миллион тыщ

      @user-oo7sz2tk9f@user-oo7sz2tk9f2 жыл бұрын

    • @@user-oo7sz2tk9f тэнге?

      @staskemerovo42@staskemerovo422 жыл бұрын

    • @@staskemerovo42 гондурасских рубдей

      @misuzugomennasai2122@misuzugomennasai21222 жыл бұрын

  • The best relaxing video I've ever seen!

    @drkovalex@drkovalex Жыл бұрын

    • thank you

      @NarranCzlaser@NarranCzlaser Жыл бұрын

  • How much does it affect thesurface at the microscopic level? You were cleaning a mounted rollet bearing inthe video, though it's probably gonna be changed, it'd be interesting to know if it etches the surface significantly

    @inconel7185@inconel71852 жыл бұрын

    • Its a nanosecond pulse, so probably less than laser peening? Which would mean very little cold work effect at the surface, introducing a minor compressive strain. In most cases, that should be a good thing, no?

      @death_parade@death_parade Жыл бұрын

    • @@user-dj8xq8wg6n I wonder how the chosen frequency affects the surface. Depth of penetration would depend on it I think?

      @death_parade@death_parade Жыл бұрын

    • @@user-dj8xq8wg6n Под наносекундами я подразумеваю, что сам лазер излучается импульсами, длящимися несколько наносекунд. Импульсы повторяются, но каждый импульс сам по себе длится наносекунды. Спасибо за объяснение влияния частоты на поверхность.

      @death_parade@death_parade Жыл бұрын

  • I need this cleaning equipment. It seems a miracle worker!

    @blezc1498@blezc14982 жыл бұрын

  • So clean it looks like he's spray-painting everything gun metal grey. 👍

    @bellezavudd@bellezavudd2 жыл бұрын

  • Great! But, how does the burnt rust/oxidation affect the atmosphere, especially the air around the laser user?

    @gw4273@gw4273 Жыл бұрын

  • Hi, i have one question. Is it posible to remove the paint from a plastic boat!? (Like Sea ray or Bayliner) Thx👍🏻

    @jackdaniels4432@jackdaniels443216 күн бұрын

  • The use of lasers is being done cleaning older art work. Saw this several years ago in Florence, Italy. Amazing

    @1111boone@1111boone2 жыл бұрын

    • I just did some research on what you shared. Thank you for the knowledge And you were correct It’s AMAZING!

      @earthsucks9555@earthsucks95552 жыл бұрын

    • I would like to access such equipment for cleaning destabilized patinated bronze. Would you know if it works on an ancient bronze patina and so called "bronze disease"?

      @HappyQuailsLC@HappyQuailsLC2 жыл бұрын

    • @@HappyQuailsLC I really have no idea. I’m sure there’s something on the internet that could give you some direction.

      @1111boone@1111boone2 жыл бұрын

    • They used it on the Mona Lisa, now she's R rated, you can see a nipple.

      @claudiodominguez.@claudiodominguez.2 жыл бұрын

  • I need 4 of these like yesterday, this is every welders dream come true

    @williamponce5907@williamponce59072 жыл бұрын

  • Anyone else think this is just super satisfying 🤤

    @thatblackkid22@thatblackkid22 Жыл бұрын

  • Incredible! So fantastic, yet so scary to think about what the results of either accidents or (even worse), Intentional misuse, that I'm kinda shocked that we haven't heard much about those two potential scenarios thus far! Therefore, I'm so proud of you humanity. Keep up the good work. 😇😁😶‍🌫

    @jessebauer0110@jessebauer0110 Жыл бұрын

  • So satisfying to watch, i work on engines and i always had this urge to clean every nook and crannies of an engine, and this laser cleans like engine parts came out of factory....so cool

    @sgtjoe2008@sgtjoe20082 жыл бұрын

    • Its amazing

      @tedbell4416@tedbell4416 Жыл бұрын

    • Kanma mit diesem Lasergeräte auch mit Fenster Lack entfernen Welcher Hersteller und wie ist die Name das gerät

      @yisa8148@yisa8148 Жыл бұрын

  • Wow….. that’s a truly impressive machine.

    @paycheckvomitthorax@paycheckvomitthorax2 жыл бұрын

  • Definitely a video for the lads 👌 something so satisfying about

    @resisantcubegaming983@resisantcubegaming983 Жыл бұрын

  • SOLD! I'm going to buy one or two of these!

    @richardcraig6089@richardcraig6089 Жыл бұрын

  • They need to make a giant version and fly over DC with it.

    @jsboening@jsboening2 жыл бұрын

    • Lol

      @garybrown9719@garybrown97192 жыл бұрын

    • Haaaaaa,yes they do asap, before it's to late

      @Waderbader1982@Waderbader19822 жыл бұрын

    • Why sweep over DC, what does it do?

      @mickcarson8504@mickcarson85042 жыл бұрын

    • We currently aren't planning to sell our technology to Earth-invasive aliens, so if you see one of our laser systems flying over DC, chances are it's gonna be a China knockoff.

      @NarranCzlaser@NarranCzlaser2 жыл бұрын

    • DC & Beijing.....that would be awesome......wooorrrlllddd peeeaaaccceeee 😂😂

      @dorxlab@dorxlab2 жыл бұрын

  • Never seen this hand held unit but very interested in having one soon. This demo was impressive ! Thanks !

    @jameshuntington2926@jameshuntington29262 жыл бұрын

    • "handheld" lol its connected to a big ass machine

      @no-eb2xx@no-eb2xx2 жыл бұрын

    • Chinese will copy it quite soon. "There is no electronic device we cannot copy and sell to the Americans in Walmart for $19.95" On sale for $19.95 in Walmart in 3, 2, 1......... . .

      @Greg_Chase@Greg_Chase2 жыл бұрын

  • Unbelievable! The incredible technology that looks like a magic.

    @Kanfir@Kanfir Жыл бұрын

  • How does this work? I don't see anything coming off so is the laser just heating the surface to the point of melting the rust/dirt with the metal?

    @RageOfBlades@RageOfBlades2 жыл бұрын

  • There is something very satisfying in watching this process take place. Great technology !! Thank of all the applications for this sort of technology in cleaning parts. Not to mention the time that is saved along with no need for harmful chemicals.

    @levyrogers6979@levyrogers69792 жыл бұрын

    • My thoughts exactly.

      @diggindeep1653@diggindeep16532 жыл бұрын

    • Yeah wow.

      @richardbrown5670@richardbrown56702 жыл бұрын

    • Bruh the rust and grime don't just disappear. They're literally burned and evaporated

      @szpecunio@szpecunio2 жыл бұрын

    • What about the ozone

      @matthewfredrickmfkrz1934@matthewfredrickmfkrz19342 жыл бұрын

    • This is perfect for my OCD. Just watching calms me down.

      @whiskeybuilder6335@whiskeybuilder63352 жыл бұрын

  • Seeing it chew through the epoxy paint on that valve was impressive.

    @midship_nc@midship_nc2 жыл бұрын

  • Very satisfying 😌

    @Inkedryder@Inkedryder2 жыл бұрын

  • There is something relaxing about this. I could do this all day if I were left alone and I’d love it.

    @realityengine@realityengine3 ай бұрын

  • What a tool!!! Excellent piece of engineering!

    @El.Duder-ino@El.Duder-ino2 жыл бұрын

  • Une démonstration de l'efficacité du procédés de nettoyage par laser convaincante et assez impressionnante. Vidéo tout à fait intéressante. Merci.

    @STohme@STohme2 жыл бұрын

    • Qui peut à l'occasion devenir une arme redoutable...

      @Confus-Cius@Confus-Cius2 жыл бұрын

  • So do I need to exfoliate after using this or is it kinda an all in one facial cleanse?

    @wittyjoker4631@wittyjoker46312 жыл бұрын

  • Damned Impressive! How is the Surface after that Procedure? Like fine sanded or more like polished?

    @kallegrabowski8972@kallegrabowski8972 Жыл бұрын

  • this may be the dream of a vehicle restoration workshop. Like a *"Yes sir, this is classic and very well maintained down to all the bolts"*

    @andi0283@andi02832 жыл бұрын

    • Imagine all the sanding, removing the bolts, cleaning etc etc, this machine does it in 1 second instead of us doin it for hours, WTF lol

      @lossantoscity3249@lossantoscity32492 жыл бұрын

    • @@lossantoscity3249 rub the fuel tank with sandpaper until the wrist hurts?, yes I know that feeling.

      @andi0283@andi02832 жыл бұрын

    • "Yes sir. Henry Ford personally gave me this car. I'm the 1 and only owner" 🤣🤣🤣🤣

      @mpc77769@mpc777692 жыл бұрын

    • Try explaining how you lost your fingers and part of your arm your customer when you're busy trying to sell your super well looked after antique vehicle!

      @elixier33@elixier332 жыл бұрын

  • WOW! That is one of the most remarkable things I've seen in a long time! I want one!

    @steveforbes7718@steveforbes77182 жыл бұрын

    • Thats gonna cost about 9 to 10 Grand

      @Wolfmaster-fu7si@Wolfmaster-fu7si2 жыл бұрын

    • @@Wolfmaster-fu7si 2 years ago it was 50k€. Some other brand.

      @robertbabic80@robertbabic802 жыл бұрын

  • This thing is sweet.....what is the cost of this...im in the semi buisness my trucks components take a beating up north during winters havevto paint frames every so often.

    @leleetifra8818@leleetifra88182 жыл бұрын

  • This is so satisfying to watch

    @ttunderbridge5762@ttunderbridge57622 жыл бұрын

  • This is amazing! The man hours it saves is crazy.

    @kicknsystm@kicknsystm2 жыл бұрын

  • I’ve always wanted one! They seem to be fast and efficient for cleaning, probably use less power the a blast cabinet and compressor. They have come along way since Goldfinger, right Mr. Bond?

    @oldblueshhrchannel1847@oldblueshhrchannel18472 жыл бұрын

    • I agree. I am seeing many comments on here saying how expensive it would be to run.

      @LEO-xo9cz@LEO-xo9cz2 жыл бұрын

    • It's probably extremely expensive to buy though

      @carlocarnevali7790@carlocarnevali77902 жыл бұрын

    • My ex wife needs this to clean herself..... she seen more chickens than weekends

      @harleymays1736@harleymays17362 жыл бұрын

    • Except they cost so much it will take 20 years min. To recoup the cost and by then if it actually lasts more that 5 years it's junk!!! Technology is awesome but prices are way too high and the lifespan is way too short!!! Until this bridge is gapped you are just losing money. Just like the whole solar garbage, the life expectancy of a cell is 15 -25 years but it takes 20 years to offset the cost so if you are lucky you may actually get free electric for a couple years but 99.9% of the time the equipment breaks before hand. To manufacture electric vehicles and the batteries, 50% - 100% more pollution is SPEWED into the atmosphere and 15-20 years from now there will be a crisis of lithium waste which is toxic and as dangerous if not more than nuclear waste!!!

      @notnecessary7730@notnecessary77302 жыл бұрын

    • @@notnecessary7730 Полностью с вами согласен. Электромобили с сегодняшними аккумуляторами это движение в тупик.

      @user-fy4wg3tw4w@user-fy4wg3tw4w2 жыл бұрын

  • Wow!!! AMAZING LASER!!!

    @morris_albert@morris_albert Жыл бұрын

  • That was so satisfying 👍

    @petertrifoli@petertrifoli2 жыл бұрын

  • Без разницы, портативный он или нет, но он творит чудеса! Удивительно

    @LeonidSavenko@LeonidSavenko2 жыл бұрын

    • @@alekseizolotoi9275 дык... Чудеса нонче в цене... Если это реальные чудеса, а у нас все больше получается, как пел Владимир Семёнович : "мы, говорит, таким делам вовсе не обучены, и, кроме мордобития, никаких чудес... "

      @user-ml2ss6we6k@user-ml2ss6we6k2 жыл бұрын

    • @@user-ml2ss6we6k придумай аналог импортозамещение подешевле

      @user-zt3td5ux1s@user-zt3td5ux1s Жыл бұрын

  • Теперь понятно как из старых делают новые запчасти😄👍

    @user-nb9rl7no8r@user-nb9rl7no8r2 жыл бұрын

    • Стоит она столько же как и твоя квартира. а эффективность её вызывает большие сомнения ввиду того сколько эта хрень стоит. это чисто моё мнение. убрать с поверхности пыль или грязь одно дело, а удалить глубокую и старую ржавчину это совсем другое дело.

      @PubgMobile-pg5zo@PubgMobile-pg5zo Жыл бұрын

    • @@PubgMobile-pg5zo а что со слоем ржавчины не справится?

      @Mralexsunny@Mralexsunny Жыл бұрын

    • ​@@PubgMobile-pg5zoнаш маленький умненький любитель Пубга не только не смог разобраться в спецификациях прибора, но даже досмотреть видео до середины. Зато игрулечки любим, да?

      @midnight_tone@midnight_tone3 ай бұрын

  • Is it only for metal? Or can I use it for removing paint from polypropylene bags?

    @allamyratkuliyew717@allamyratkuliyew717 Жыл бұрын

  • I definitely NEED this!!!

    @karjalasta@karjalasta Жыл бұрын

  • Это - потрясающий инструмент! Браво разработчикам!

    @sergeybritan@sergeybritan2 жыл бұрын

    • Нам накуй ненадо, лучше церковь построим.

      @user-hr1co8ry3b@user-hr1co8ry3b2 жыл бұрын

    • Onde compra?

      @silvioleardini6647@silvioleardini66472 жыл бұрын

    • Hey, does Google translate these for you too?

      @chaeljr.1254@chaeljr.12542 жыл бұрын

    • @@user-hr1co8ry3b А начнём с того, что разучимся писАть...

      @user-sw4hh2st4x@user-sw4hh2st4x2 жыл бұрын

    • @@user-hr1co8ry3b да, как священник очищает святой водой.

      @user-lx2ur9kd9o@user-lx2ur9kd9o2 жыл бұрын

  • Это же потрясающе нужная вещь! Браво создателю!

    @LoraAmar@LoraAmar2 жыл бұрын

  • How long it stays clean and shiny? Does laser damage the surface more rough?

    @pauldimascho964@pauldimascho964 Жыл бұрын

  • So satisfying!

    @_veritas-369@_veritas-3692 жыл бұрын

  • I wonder if this would work on cleaning condenser/evaporater coils.

    @transmotion23@transmotion232 жыл бұрын

  • That’s it. I’m selling my cabinet sandblaster and getting one of these. Thanks for sharing!!!

    @TerryMundy@TerryMundy2 жыл бұрын

    • You're very welcome! Although we do not try to present laser as a superior (or inferior) compared to blasting methods, those two simply have different purpose. The biggest difference is that laser, compared to blasting methods doesn't do any damage to cleaned material, it's the best option for when you are cleaning anything that can not be damaged (such as molds, anylox rollers, old, historical objects, repeated cleaning in factories).

      @NarranCzlaser@NarranCzlaser2 жыл бұрын

    • That looks like the material gets real hot

      @adamcohan2947@adamcohan29472 жыл бұрын

    • The metal looks more weldable than if it was blasted

      @adamcohan2947@adamcohan29472 жыл бұрын

    • Where can I buy one?

      @latheadventures1390@latheadventures13902 жыл бұрын

  • 何故おすすめに上がってきたんだ…見てて気持ちいい

    @helloworld9456@helloworld94566 ай бұрын

  • That looks like a special effect in a sci-fi movie. Amazing

    @enriquegarciacota3914@enriquegarciacota39142 жыл бұрын

  • Yeah, forget sand blasting! I’ve done my share, and it was a pain! This new tool is incredible!!!

    @sipos66@sipos662 жыл бұрын

  • É , simplesmente sensacional esse laser de limpeza ! 👌😏😁👏👏👏👏

    @neltonsodre1838@neltonsodre18382 жыл бұрын

    • Bom pra queimar pelo de porco também Toucinho já sai pururucado

      @r.guerreiro140@r.guerreiro1402 жыл бұрын

    • Olha o cabo de energia que alimenta essa coisa. E ainda tem bulbina pra aumentar a tensão.

      @AlexandreSantos-wd1ic@AlexandreSantos-wd1ic2 жыл бұрын

    • Combien ça coûte ?

      @correiacarlos974@correiacarlos9742 жыл бұрын

    • no meu entender ele estragaria diversos motores...saindo fumaça quando toca na superfície..e partes internas mais sensiveis?

      @jose.a265@jose.a2652 жыл бұрын

    • @@jose.a265 你的引擎也太爛了吧!!只是表面雜質揮發的煙吧!

      @carloshong1430@carloshong14302 жыл бұрын

  • Does this work as well or better than cryo-gun cleaning?

    @mliler1405@mliler1405 Жыл бұрын

  • Looks like a fantastic product. Do you need an external chiller too operate it?

    @motioninmind6015@motioninmind60152 жыл бұрын

  • Просто - сказочный инструмент! 👍😎☝️

    @capitanj.d.@capitanj.d.2 жыл бұрын

    • С таким можно столько бабла заработать

      @zakrytikzuk@zakrytikzuk2 жыл бұрын

    • @@zakrytikzuk если денег на газ хватит

      @user-yu1yx1yk9q@user-yu1yx1yk9q2 жыл бұрын

  • Fascinating. You guys should now work on a laser saber prototype ;-)

    @SamSoulTrop@SamSoulTrop2 жыл бұрын

  • looks like something styropyro would have great fun with and could really break it down and give us all the info

    @kirkanos3968@kirkanos39682 жыл бұрын

  • Do you suit up like when you're using a plasma cutter to prevent the "sunburn"?

    @johnc6042@johnc6042 Жыл бұрын

  • Incrível gostei 👏👏👏👏 👏

    @edisonlima550@edisonlima5502 жыл бұрын

  • Impresionante una herramienta fantástica que bueno cuando el hombre aplica su inteligencia y la tecnología para bien de está manera tendríamos un mundo mucho mejor ! Saludos desde argentina

    @sergiogabrielgrillo2382@sergiogabrielgrillo23822 жыл бұрын

    • No

      @tldmimikyu5779@tldmimikyu57792 жыл бұрын

  • Superb machine .. is it handmade and leagl .. if legal please let me know where Ii can buy it. Or can it be shipped to Dubai .. please let me know ..

    @salimali8053@salimali80532 жыл бұрын

  • I don't have a use for one but I need this in my life.

    @ThomasDoubting5@ThomasDoubting52 жыл бұрын

    • This.

      @erfho8y@erfho8y2 жыл бұрын

    • I'm with you. Total waste of money and unsafe as hell...but I don't care.

      @laxtobuttgroyn1193@laxtobuttgroyn11932 жыл бұрын

    • Confession to a Priest will surely wipe away all miseries and weariness.

      @jgabuten8868@jgabuten88682 жыл бұрын

    • Well I was thinking about a faster haircut ??

      @jshaw4757@jshaw47572 жыл бұрын

    • @@laxtobuttgroyn1193 driving a car is 1000 times more dangerous probably 100,000s more so...but yh you certainly need to be carefull using such a thing a bit like a deep fat fryer if not carefull you could have problems

      @jshaw4757@jshaw47572 жыл бұрын

  • Absolutely outstanding and totally indispensable!! This is something that every shop must have! Please post where and how to get one.

    @professordanfurmanek3732@professordanfurmanek37322 жыл бұрын

    • It works really well on plastic

      @PurpleObscuration@PurpleObscuration2 жыл бұрын

    • @@PurpleObscuration It's also a great tire shine product, no more scrubbing and rubbing it's a blast.

      @claudiodominguez.@claudiodominguez.2 жыл бұрын

    • Ты за всю жизнь не заработаешь столько, сколько он стоит

      @user-zt3td5ux1s@user-zt3td5ux1s Жыл бұрын

  • Will this product clean galvanized coating off of base materials ?

    @charliemc3276@charliemc32762 жыл бұрын

  • Hello, what is the price of the 2000w unit, equipped for rust/paint removal?

    @PlayerXification@PlayerXification Жыл бұрын

  • "Эээ, слюшай, всё новое, мамой клянусь"

    @xuyuzer@xuyuzer2 жыл бұрын

    • @Ad1thyan иди от сюда мальчик не мешай

      @Rainkonen43@Rainkonen432 жыл бұрын

    • @Ad1thyan he said "Uh listen, everything is new, I swear by my mom"

      @Chu_SunCai@Chu_SunCai2 жыл бұрын

    • @@Chu_SunCai 😂😂😂😂😂

      @woy_men5728@woy_men57282 жыл бұрын

    • @@Rainkonen43 😀😀😀

      @valentinvalentin4791@valentinvalentin47912 жыл бұрын

    • @Ad1thyan Rainkonen said go hou boy...

      @user-jv6dj8ft2r@user-jv6dj8ft2r2 жыл бұрын

  • Would this be a good substitute for a plasma rifle in the 40-watt range?

    @aliendroneservices6621@aliendroneservices66212 жыл бұрын

    • If so, looks like I'm closing shop early today!

      @IpfxTwin@IpfxTwin2 жыл бұрын

    • Just what you see buddy

      @familyemail2649@familyemail26492 жыл бұрын

    • More like an A&W diverter choke on a shotgun.

      @claudiodominguez.@claudiodominguez.2 жыл бұрын

  • I'm just wondering if the heat confuse parts together? You wouldn't want that to happen to moving parts. Also the exhaust and or radiation that it may emit, is that harmful to the person using this laser?

    @zoe1972@zoe19722 жыл бұрын

  • Crazy machine i can't sleep until I have one sooner😮.

    @dambeeric9109@dambeeric9109 Жыл бұрын

  • Imagine using this 4000w laser to clean on a robotic arm that's program for cleaning pieces of automotive equipment or parts that you remove off the car or leave on the car to clean as is, this is incredible when I was doing a valve cover gasket replacement I really could have used this the cleanup around the mating surfaces of the valve cover

    @petershulick5270@petershulick52702 жыл бұрын

  • Living on a steel boat - I could really use one of these. Brilliant tech - never knew it existed.

    @KeepItSimpleSailor@KeepItSimpleSailor2 жыл бұрын

    • Send it to the old sea dog! Happy sailing...

      @intrax2tv@intrax2tv2 жыл бұрын

    • steel contains carbon, all the carbon will be successfully evaporated from the steel of your boat. After that it is going to start rusting. The metal on the video is most likely aluminum, very highly reflective metal

      @absolute___zero@absolute___zero Жыл бұрын

    • @@absolute___zero You sure about that "carbon evaporation theory"? There is this entire concept of laser peening that uses even more dwell or power in the laser than this device you know?

      @death_parade@death_parade Жыл бұрын

    • @@death_parade well I just saw a video where a guy cleans steel, but what is happening is that the carbon is also evaporating, along with iron. The thing is that the oxide (rust) evaporates faster than steel because it doesnt have strenght of steel , but both atoms are flying off the surface when laser is applied, iron and carbon. (while rust molecule Fe2O3 is converted back to pure iron in a combustion reaction due to heat). Thats why you are seeing dark surface after it is cleaned by laser, there are traces of carbon there. All the laser does is just burning, same old thing. Probably the wavelength of laser diode is tuned for iron oxide, so steel is affected less, but I am absolutely sure that everything flies off the surface , the carbon, the iron and the iron oxide, that's how lasers work.

      @absolute___zero@absolute___zero Жыл бұрын

    • @@absolute___zero Whatever is happening in the outer layer material is a combination of the following different mechanisms (ratio of each mechanism's contribution depending on the material being cleaned and the process parameters selected):- 1.) Ablation of the surface layer 2.) Impact: Thermal shock induced by the laser leading to stress waves that remove the material . If the absorptivity of the corrosion layer is more than the substrate, if the energy density for corrosion layer evaporation is less than energy density required for substrate evaporation and if you choose the right process parameters, it leads to a self-limiting cleaning, which doesn't ablate the substrate, much less thermally shock it. This happens in case of low power and higher pulse repetition frequency. Obviously, dwell times and number of passes have an impact as well. Anyways, I am still in the middle of studying it, but no carbon removal and targeting of only rust can be done if self-limiting cleaning is done, which probably wasn't the case in the video you mention. Maybe the process parameters chosen in that video were wrong, such as probably the energy density of the laser is chosen such that its greater than even the evaporation limit of the substrate, or maybe the dwell time is too high. Another thing, relying on contrast of the material surface after cleaning is not a reliable way to tell what happened there. . You can read more about it in this open-source paper: 10.26678/ABCM.COBEM2021.COB2021-0007

      @death_parade@death_parade Жыл бұрын

  • These things would be amazing if they weren't crazy expensive.

    @charleshines1553@charleshines15532 жыл бұрын

    • These are also extremely dangerous, much more than anything else out there.

      @MicroageHD@MicroageHD2 жыл бұрын

    • @@MicroageHD yeah, definitely more dangerous than firearms…

      @camaroboi13@camaroboi132 жыл бұрын

    • @@camaroboi13 Hmmm..

      @osamabinladen824@osamabinladen824 Жыл бұрын

  • Excelente resultado es un producto ideal , ¿cómo se consigue y su costo? gracias.

    @gianfrancogiuseppetalassie9542@gianfrancogiuseppetalassie95422 жыл бұрын

  • Amazing piece of equipment.

    @skinnydipper3493@skinnydipper34932 жыл бұрын

    • Thank you! We appreciate that!

      @NarranCzlaser@NarranCzlaser2 жыл бұрын

  • Залипательное видео! Спасибо

    @kazak9118@kazak91182 жыл бұрын

  • I have no practical use for this in my everyday life, but I still want one so bad right now.

    @sabastianleisek396@sabastianleisek396 Жыл бұрын

    • LOL you are absolutely right. What a toy!

      @aerospacesystems8658@aerospacesystems8658 Жыл бұрын

  • Unusual Satisfaction

    @MrMaster2262@MrMaster22622 жыл бұрын

  • Бритвенный станок Чака Норриса.

    @YarvikG@YarvikG2 жыл бұрын

    • Лазер не бреет Чака Норриса, Чак Норрис бреет лазер.

      @NarranCzlaser@NarranCzlaser2 жыл бұрын

    • @@NarranCzlaser красавцы))) супер комментарий)))))

      @user-sw1eb6gt6t@user-sw1eb6gt6t2 жыл бұрын

  • Fantástico. Muito bom

    @luizsantos9102@luizsantos91022 жыл бұрын

  • Nice power ! :]

    Жыл бұрын

  • I work in the quality department at my job and I NEED THIS!!! NOW!!!

    @evog35viii@evog35viii Жыл бұрын

  • To me this is literally like magic!!

    @martinz.4852@martinz.48522 жыл бұрын

    • Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke

      @charlielynes@charlielynes2 жыл бұрын

    • my cat saya hes using sorcery!

      @fidelcatsro6948@fidelcatsro69482 жыл бұрын

    • Exactly martin looks like a scary magic haha

      @nasrogames28@nasrogames282 жыл бұрын
KZhead