Story of a fork seal job that went a little astray, check your mechanics work. Mechanics are good, but...
#motorcyclymechanic
#gonetoofar
#favournotforgotten
Story of a fork seal job that went a little astray, check your mechanics work. Mechanics are good, but...
#motorcyclymechanic
#gonetoofar
#favournotforgotten
I do all my own work. Had an oil leak (from new) on a Triumph Daytona 675. It was leaking from where the outlet of the combined coolant/oil pump exited the crankcase. Dealer told me it was a sump gasket. I told them no. They replaced sump gasket. Still leaked. Another sump gasket! I convinced them it was the pump outlet o-ring. They said it would be a shame to split the cases on a new bike. I told them there was no need to split the cases, and EXPLAINED TO THEIR MECHANIC how the job is done. Believe it or not they then asked me for a link to the job explanation on a forum I was on! Following this, we came to an agreement - I would do all my own service and warranty work using genuine parts and they would stamp my warranty book. And this is one of Australia’s biggest motorcycle dealers!
Wow, that is insane! I've just put mine in for 1st year service, speed Twin 1200....
This is why I've invested in thousands on specialist tools including impact wrenches, bike lifters, flashtuners, you name it. By now it's all paid for itself in savings and less stress. KZhead has been my teacher. I can do almost all work that a mechanic can, except I give a damn.
Spot on man. You do a better job if you give a shit about it. I keep loosing tools, that's why I'm reluctant to keep buying. My fault, just disorganised;-)
I’m at a crossroad as well where I think it might be best to invest in a proper workshop. Many times have I botched up a job thinking I can find an alternative ways to do it myself only to realise I could have done it better with the correct tools, saving time and money. I’m fed up with mechanics as well, not to mention what they charge! I do about 15k miles a year to and from work plus touring once or twice a year. I think it will pay for itself. I’m moving house next year and it WILL have garage for the bikes and the workshop 😂
I completely agree, and I'll do you one better. I know a guy that works at a dealership (not naming the brand, but it's a rather well regarded one located in a higher class city), and I hear stories about technicians vaping and eating in customer's cars, a mechanic test driving a car and going over a median, wheel lug nuts not being tightened down, and so much more. Even brand new cars are getting blown motors sometimes. Too many of people simply do not care, or are not trained properly for their job. If you know what you're doing, having someone else work on your vehicle is a risk not worth taking, ESPECIALLY with a motorcycle. Like you said, you can maintain whatever quality you want if it's your vehicle, and you know more about it than anyone that touches 5+ cars a day.
Half the reasons I own bikes is to work on them. I don't pay other folk to ride my bikes either.
That's a good way of looking at it man
I am a professional mechanic of 37 years experience i only work for select people and select jobs
Bought a used bike and before I could burn a tank of gas it crapped out. I didn’t have the time to figure out the issue so I took it to a mechanic. Turns out the dealership I bought it from had “serviced” it before I took delivery and didn’t fully screw down a spark plug cap so it wasn’t firing one plug. Ok, simple fix and since it was with a mechanic I asked him to give it an inspection to ensure the loose cap and resulting overheating exhaust and unburnt fuel didn’t cause any other issues. He said it was all good. I got it home and soon found that the carbon fiber bits of the silencer has burned to a crisp in places when things overheated due to the loose spark plug cap. Now, I’m in the process of replacing the entire exhaust, manifold and silencer, and I’m doing it myself. Gives me the confidence to now do my own maintenance and basic repairs. 2 shops and both were kind of shite.
You're paying for someone else's mistakes. I've done that often, I try not to stress over it too much, Interesting story ;-)
I avoid all mechanics, had the 32k mile service done and didn't get all of my bike back, Missing bolts, bolts of another bike and missing trim clips. also had a rear tyre fitted and they failed to line up the light spot with the Schrader valve. This means they had to spam my rear wheel with balance weights all over the place.
That would be funny, if it wasn't true!
To trust anyone, isn't a good idea. To trust nobody, isn't a wise choice either.
Yep, and business reviews are unreliable, often it's only disgruntled customers that leave feedback.... personally, I only leave +be feedback or none at all
Too many "What difference at this point does it really make." mechanics out there just filling holes in suspension tubes and moving on. It's increasingly difficult to find good knowledgeable present interested mechanics. I've found three in recent years - worth their weight in gold. Especially since, despite being a diligent researcher and a procedure-driven man, anything beyond changing fluids has me cursing as I throw tools at walls with skinned knuckles. I'm no mechanic. You're a true KZheadr when you've got GoPro mounts on your pram, congrats again mate. Enjoyed the vid, good story.
Tnx Nick, I'm in a small town, I cannot go on whinging about mechanics or I'll be pushing my bike to Townsville next time ;-)
replace the bushings on the shocks
Why mention the apprentice was a Maori? Not a necessary detail.
It's a joke, said thanks in Maori at the end, no offence intended
@@aussiewantok Oh! Hilarious
@Lou.C59 all good mate, Kia Kaha Aotearoa
My partner had a series of breakdowns on her divvy 600, was recovered and used a few mechanics local to her and it kept acting up again within weeks with the same problem. So I have little trust for mechnics now and fix it for her, the same problem doesnt occur twice anymore
Shorten the bolts. Take them out, put on a nut all the way. Cut off the excess length, clean up the end. Remove the nut to clean up thread at the end. Install with locktite or a spring washer (budget for the washer thickness before you cut them). But I hear what you are saying about mechanics. I had a new front tyre fitted and then I had a slow leak - they must have damaged the wheel. Took it back and they reinstalled with "sealant" and that mostly fixed it. Have to find a better tyre fitting place.
We all have those stories, guess where I'm going if I cannot fix it myself? Hahaha, probably the same guy!
Grub screw and red locktight.
Sounds more like you should have paid for an actual mechanic, with an actual registered business number so you can enforce a contract of agreed works etc. Your fault for trying to skimp on it, because if you have a verbal contract with a mechanic, there are consumer laws you can enforce. But even if they are not a registered business, you could also go to a small claims court, provided you can prove that they have irreversibly damaged something or incurred a cost to you without compensation
I understand what yr saying, but it's just worth the hassle in the end. I have a spare set of forks anyways...
Brawo, Mikołaj. I'm with you on this one !
A simple fix can be replacing the bolt for the air hole with a short "set screw", which has no head and can be screwed in flush with the the fork tube. The set screw can be simply ground to length if needed to the thickness of the fork tube if needed. A couple of drops of Locktite on the threads and you're good to go.
Or as someone suggested, a short rubber one...tnx
That's a grub screw. A set screw is a fully threaded bolt with a head
Awesome post, I love it. You have the traits of a mechanical engineer. Work your way thru the problem and you find the solution. What a great satisfaction rush. Well done. DH from Canada eh?
Tnx, mate
Why is Vlad from Garage54 your thumbnail?
Tnx for introducing me to Garage54 ;-)
@@aussiewantok Yeah Garage 54 is awesiome guys doing a lot of crazy stuff. I was also surprised to see Vlad on your chanell I thouth it's their new video as I am subscribed to them for a long time haha.
@Rus-eq5wn I was looking for a thumbnail pick and googled Russian Mechanic....oops
put a short rub screw in
That's actually a really good idea, tnx
I was actually expecting that to be mentioned in the video.
That's cool. It's kind a sad when ya gotta check the Mechanics work. Cheers
haha right, 35 years as a motorcycle engineer I can chime in here Hourly rate The overheads of running a shop and hourly rate promote sloppy work you are quite right get the job out who gives a fk, THATS your problem. When it comes to modern bikes you need some specialised equipment ( expensive ) Routine maintenance isn't a problem but if it say develops a misfire ,,,, and IF you are charging 100 bucks or more an hour ,,,, your bill is going to make small African countries wince in pain ! (Manufacturers are at fault here ) too high tech we don't need , What you SHOULD pay for in a mechanic is quite simply experience in getting the job done 1st time correctly ( there are still shops like that ) Even I use mechanics when I know the fella is just better than me at a certain task ( btw those fork seal hour plus parts if that )
Yr right, and I don't mind paying , and I certainly would not like run a workshop. What a nightmare and the complaints! Wow!
motorcycle engineer? tell us more, which motorcycle manufacturer do you develop and engineer for? do you work on manufacturing and casting, or electrical or control systems?
Was this mechanic chosen at random or a referral?
I chose, knowing there could be issues. A lot of mechanics will not touch old bikes, so in a way I was grateful
APL charges arehigh but i only have the job done once
Very cool! 👌
Thank you! Cheers!