KZhead
Автокөліктер мен көлік құралдары

Assembling a 500HP Miata Engine From The Bare Block, ASMR Style.

TheCarPassionChannel
2024 ж. 2 Мам.
1 210 700 Рет қаралды
Жүктеу

#asmr #lofi #mazda #miata
By popular demand, here is the FULL parts list for the engine:
www.thecarpassionchannel.com/v...
Since I already have a full engine build series, I didn't want to make repeat content, but still wanted to showcase the work that went into this thing. So I ended up spending weeks making this instead lolll. Keep in mind, this video is just for entertainment, and does not show the other half of what goes into building an engine, aka taking all of the measurements, modifying parts to fit, cleaning everything piece by piece, etc. What you see here is basically the fun part! If you'd like more info on the engine build check out the technical blog here:
www.thecarpassionchannel.com/v...
----------
Support TheCarPassionChannel on Patreon!
/ thecarpassionchannel
Want to make a one-time donation? You can buy me a gallon of E85!
www.buymeacoffee.com/carpassion
Interested in having a 1 on 1 video call? Details below:
thecarpassionchannel.as.me/
What’s that digital gauge in the dash?! It’s called a CanChecked and you can pick one up from my friends at Bofi Racing!
bofiracing.co.uk/?ref=7465 (Car Passion affiliate link)
Get yourself a Dragy! (Affiliate Link)
dragymotorsports.com/?rfsn=65...
Check out my Amazon Store!
www.amazon.com/shop/thecarpas...
Use coupon code CARPASSION50 to save $50 on your first High Performance Academy course!
hpcdmy.co/cp10
---------
0:00 Bearings & Crankshaft
3:11 Pistons & Rods
8:24 Oil Pump & Pan
14:37 Water Pump, Harmonic Balancer
16:37 Valvetrain & Cams
19:35 Head Gasket & Head Install
21:56 Timing Belt, Plugs, Oil Filter
23:10 Covers
24:24 COPs & VVT
27:25 Intake & Exhaust Manifolds, Fuel Rail
28:57 Final Product

Пікірлер

  • No blah blah blah talk, no annoying music, no selfie stick where they film themselves more than the work. No this is just straight to the work. Perfect! Looks awesome. Subbed.

    @stinkydoggy98@stinkydoggy986 ай бұрын

    • Nailed it!!! 👍

      @teamgonzo9289@teamgonzo92894 ай бұрын

    • This is the best engine build i have seen in while ❤

      @williamsiniovosa4945@williamsiniovosa49454 ай бұрын

    • Absolutely i hate those videos that they talk with their annoying voice and saying about the process that we’re watching it with our eyes This one was perfect thank you 🔥🔥🔥

      @__mehdimt__@__mehdimt__3 ай бұрын

    • i found the music pretty annoying, but otherwise yeah!

      @Gizmos_and_stuff@Gizmos_and_stuff3 ай бұрын

    • This was what I was looking for, need more long ones for my second monitor content!

      @xkasxprox@xkasxprox2 ай бұрын

  • I have to say that that was like watching an artist work, And create a work of art, worthy of any museum. Pretty excellent for a guy that's taking a break. Well played.

    @mrfixall@mrfixall Жыл бұрын

    • And not having a big shop to work out of. Can’t wait for dyno day!

      @jefftoonstra5087@jefftoonstra5087 Жыл бұрын

    • A lot of knowledge right there….love watching it..

      @dgcmusi@dgcmusi Жыл бұрын

    • Hey ... by the way, is this engine turbocharged?

      @JohnKickboxing@JohnKickboxing Жыл бұрын

    • @@JohnKickboxing yes it is

      @BWORKS2203@BWORKS2203 Жыл бұрын

    • @@BWORKS2203 👌

      @JohnKickboxing@JohnKickboxing Жыл бұрын

  • Daddy Greg bringing home the bacon yet again

    @crumpets19@crumpets19 Жыл бұрын

    • On valentines day no less. HE DOES LOVE US! lol

      @potymouf1@potymouf1 Жыл бұрын

    • don’t ever say that again bro..

      @DaeCRG1@DaeCRG111 ай бұрын

    • u

      @andynguyen1969@andynguyen196910 ай бұрын

    • Do you even have a clue that it works? Do you even know the guy?

      @caseykelso1@caseykelso17 ай бұрын

    • You okay? Are you gay?

      @henryhooker3282@henryhooker32827 ай бұрын

  • Greg, your techniques have become far more refined since the fist build. Looks far more surgical than your earlier builds. Look forward to the day on the dyn.

    @Luckde10@Luckde10 Жыл бұрын

  • Yesssss exactly what I needed right now! Thanks for taking your time to produce this great content for us :)

    @MultiFerrarifreak@MultiFerrarifreak Жыл бұрын

    • what , just joining aprts,, dude thas nothing you dot make a racing engine tyat way,

      @kurkkobain@kurkkobain8 ай бұрын

  • I’ve been watching for years but never commented. This video was absolutely fantastic. You have gotten so good at your craft, both in building and capturing/editing. Love your videos, keep them coming!

    @andrewyang60@andrewyang60 Жыл бұрын

  • Words cannot describe how satisfying it is watching an engine be assembled. All while being educational. Please make more of these the exact same formate exact same music. It would be much appreciated 🙌🏾

    @RaiLosTHisMind@RaiLosTHisMind6 ай бұрын

  • Beautiful work Greg, hypnotizing. Your cinematography has gotten so good!

    @mazdamiatafied@mazdamiatafied Жыл бұрын

  • Thank you Greg for all your inspiring videos. This one could not be better timed, I currently putting together my shaved 2001 VVT block for my 10AE. Keep doing what you do!

    @erictol@erictol Жыл бұрын

  • This is like the best lego set in the world. Watching that whole camshaft assembly get put on top of the block was like building a lego and it makes you take a detour to build a different part and then you put it all together and it looks amazing. This is truly one of the best things I've watched.

    @dinokolonic9716@dinokolonic9716 Жыл бұрын

  • "cries in poor" man, i felt that on a spiritual level LOLOL

    @ninjaStalker069@ninjaStalker0693 ай бұрын

  • Wow, you outdid yourself on this video Greg. Well done it's such a nice video to watch and love the background music. :) Keep up all the good and hard work!

    @Cairo5555@Cairo5555 Жыл бұрын

  • My guy got all the good angles. It's reasonably laborious to do an engine build but to spend the time to film it in this way ON TOP of that is seriously extra. You have above and beyond discipline.

    @alanscott156@alanscott156 Жыл бұрын

  • Bruh, the chilliest half hour of yt ever. Thanks, that was very relaxing.

    @38tech@38tech Жыл бұрын

    • Amen

      @twostorywood@twostorywood Жыл бұрын

  • The parts list and details you’ve provided are fantastic. So much research and planning given away to anyone on a similar journey with their Miata. Good on you ❤

    @HaworthJimmy@HaworthJimmy9 ай бұрын

  • Happy to see this coming together man! Always stoked to see your builds and the directions they go! Keep it up!

    @Spademonkey@Spademonkey Жыл бұрын

  • can we please point out that 1 handed hex key skill. I have never seen anyone do it so smoothly!

    @crossfiregaming6332@crossfiregaming6332 Жыл бұрын

  • The video I did not know I needed, engine building is always a joy to watch.

    @lucusc4002@lucusc4002 Жыл бұрын

  • After building a few turbo Miata’s years ago it’s fun to see the whole process done again. Takes me back to the early 2000s. Thank you

    @arimaoutdoors8255@arimaoutdoors8255 Жыл бұрын

  • Using your videos as a template for my own built motor miata. Really appreciate the depth and detail as you’re pushing the limits of these BPs! Hope soon people will start to see the potential these motors have and how much cheaper they are to build than other motors!

    @stephenhawkingMLG@stephenhawkingMLG Жыл бұрын

  • A video I will watch many times in the future. Thanks for the outstanding content! I know this added a lot of time to the build!

    @neddleman26@neddleman26 Жыл бұрын

  • great content, Greg will always be a legend in the miata community

    @jdroller-cruz4296@jdroller-cruz4296 Жыл бұрын

  • This is going to be epic man!.. thank you for sharing and looking forward to see testing and tuning on this!

    @lindkvistandreas@lindkvistandreas Жыл бұрын

  • Man I loved this video! No talking, just heads up explanations of what various parts were and attention to detail. Thanks for sharing this.

    @justrelaxing1501@justrelaxing1501 Жыл бұрын

  • Nice to see the use of Nord-Lock Parts in this Engine, they just work!

    @darkengel1210@darkengel1210 Жыл бұрын

  • I’m here dad

    @fatninja987@fatninja987 Жыл бұрын

  • What a beautiful piece of art. Can’t wait to hear it run again!

    @danielplumley2649@danielplumley2649 Жыл бұрын

  • This was so incredibly satisfying; thank you for taking all the extra time and effort to create this video! You're the man!

    @MapexMiata@MapexMiata Жыл бұрын

  • This is the first video I've watched from start to finish, no bathroom breaks or nuthin' Just remember Craig, with this much power comes great responsibility

    @IllIlIlllIllIlIl@IllIlIlllIllIlIl Жыл бұрын

  • I may not have anyone for Valentine's Day but at least I have Miata Dad and my NB :) Thanks for the relaxing video Craig.

    @FDB77@FDB77 Жыл бұрын

  • Thank you for making this video, it definitely hit the spot. Keep up the amazing work!

    @upnorteeh@upnorteeh Жыл бұрын

  • Thanks for motivation and guidance for our builds!

    @Epiphonech@Epiphonech Жыл бұрын

  • I find myself always coming back to this video. You sir have crafted the absolute most perfect engine build video I have ever seen. Thank you!

    @williamkelly2467@williamkelly24675 ай бұрын

    • I appreciate you!!

      @TheCarPassionChannel@TheCarPassionChannel5 ай бұрын

  • A little greeting from Denmark, A real pleasure looking at Greg, keep up the good work 😃👌👍

    @SuperDafi1980@SuperDafi1980 Жыл бұрын

  • That was one of the most relaxing engine builds I've seen could have this on loop!

    @roderickmacdonald2389@roderickmacdonald23897 ай бұрын

  • This was so soothing, locked everyone out to enjoy this build i cherished every second, and the music was spot on. I wished it never ended.

    @williamsiniovosa4945@williamsiniovosa49454 ай бұрын

  • Incrível trabalho de montagem do motor, parabéns pelo desempenho, habilidade e competência!

    @valdirjose7118@valdirjose7118 Жыл бұрын

  • I'd also like to add that your quality of work has increased astoundingly! I was rebuilding my first motor around when you started your big red and I've been working in the industry since. I build race motors for motocross bikes and you have done just as much as our highest of quality builds. If you do end up reading this, much love ❤️

    @elijahbakker1513@elijahbakker1513 Жыл бұрын

    • I think you might be getting confused, the "updated" VVT head gasket from Mazda has smaller openings for the front coolant ports, but this gasket has full sized openings. There is nothing blocked off in the rear with any head gaskets as far as I know

      @TheCarPassionChannel@TheCarPassionChannel Жыл бұрын

    • @TheCarPassionChannel yes, after looking back into it, you are correct. Just making sure you're on your toes 😉 I'll edit it subsequently after this reply

      @elijahbakker1513@elijahbakker1513 Жыл бұрын

    • @@elijahbakker1513 You had me looking back at my own footage too, hahaha

      @TheCarPassionChannel@TheCarPassionChannel Жыл бұрын

  • from the build to the editing, great job. I've loved it, thank you

    @badjoe985@badjoe985 Жыл бұрын

  • was so happy to watch this after unwinding from a long day, love to see it

    @loganritt3805@loganritt38059 ай бұрын

  • wow someday ill have enough money to build an engine like this until then love seeing others build stuff

    @nic1586@nic1586 Жыл бұрын

  • Stunning!! 🥹Absolutely STUNNING video!! Perfect music choice, very relaxing yet soothing to watch and listen to! Now I can go to bed and dream about miatas and highpower BPs😴🤤

    @flipflop7577@flipflop7577 Жыл бұрын

  • Cinematic masterpiece from start to finish. Giving me the motivation I needed to get going with my turbo build. Also, you really did flex on everyone with the one handed allen technique 10/10

    @bobbyjackson2564@bobbyjackson2564 Жыл бұрын

  • Ive always enjoyed the videos where its just chill vibs and shows you whats up instead of telling you, while showing you. I hope you do similar style edits for any wrenching videos. Much love as always 🧡

    @A_Gray@A_Gray Жыл бұрын

  • What a beautiful engine

    @MultiMinors@MultiMinors Жыл бұрын

  • It sure looks easier to replace the timing belt, water pump and main seal when the engine is on an engine stand than what I had to endure changing those parts while the engine is in situ.

    @Laz_Arus@Laz_Arus Жыл бұрын

    • Same here. Speaking of which @thecarpassionchannel I saw in this video you slid the woodruff key towards the crank pulley after it's back on. In the timing belt video I don't remember you mentioning that

      @kylelambert1672@kylelambert1672 Жыл бұрын

    • Mine never came off the crank nose and just chilled there the entire time I was replacing stuff. And my pulley parts just went back on but the woodruff key still didn't move

      @kylelambert1672@kylelambert1672 Жыл бұрын

    • working on an engine on a stand is an absolute dream compared to bending over or laying around on the ground underneath the car. I've done my timing belt in the car, and also dropped the trans and changed the clutch under the car. Now I have my whole engine and trans out of the car, and it's so much easier.

      @Patrick94GSR@Patrick94GSR Жыл бұрын

  • This was a beautiful video, from the detail of assembly to the, the camera angles, and the editing. Also an awesome educational video.

    @dylanthomas9777@dylanthomas9777 Жыл бұрын

  • well shot and well mastered. looks amazing, and I can’t wait to see it in action

    @sparkie5571@sparkie5571 Жыл бұрын

  • I wish i could press like more than once for content like this! 🎉🥓

    @mmjohns2705@mmjohns2705 Жыл бұрын

  • Have to comment twice after watching in full.. That ol Mundo hex spin down to the last nuts and bolts represents so many years of wrenching to reach this milestone. I'm proud for you never giving up on your passions my amigo. Always looking forward to seeing what you can build! Thank you for continuing to be an inspiration and role model to us all!

    @dirtperson4221slash2@dirtperson4221slash2 Жыл бұрын

  • One of the best put together engine and video builds I've seen in a long time!! Very well put together, and can't wait to get started on my next engine build!! Last one was a 2008 4.7, Super smooth!!

    @ryandeweese363@ryandeweese3637 ай бұрын

  • I LOVED this! Strangely very satisfying. Well done with all the editing that must've gone into this video 10/10

    @philjones5728@philjones5728 Жыл бұрын

  • Greg is the only dad I trust to go out for a carton of milk and come back❤️

    @joeldesmit@joeldesmit Жыл бұрын

    • Without milk, but in a Miata

      @igorbarbarossa@igorbarbarossa Жыл бұрын

  • Inspirational!! I’ve got a BP4W waiting for a rebuild, I’ll be watching this video on loop 🙏

    @BradAF@BradAF Жыл бұрын

  • Planning on putting my head back together this weekend, so this was a treat

    @tylermfdurden@tylermfdurden Жыл бұрын

  • This plus your previous videos is a perfect tutorial for an engine build!

    @TheMapleDaily@TheMapleDaily Жыл бұрын

  • I bought a 05 nb the other day and I found your channel literally about a hour ago, you are a absolute god send and a gem, thank you daddy Greg and much love from the uk 🫶🏻

    @pappieee9409@pappieee9409 Жыл бұрын

  • Love the vibe, great build and thanks for taking us along for the journey. This thing is gonna be sick as always😍

    @yatajoris2857@yatajoris2857 Жыл бұрын

  • This was so calming. On one hand, I’ve done most of what you’ve shown here except for installing pistons or taking out valves and keepers. Watching you do the whole engine almost makes me want to build a long nose 1.6 I have laying around in my basement that has mild rod knock. But then I’ll need to buy all the expensive goodies and convince my wife the car needed it. Haha. Love to see it.

    @1987RX7TII@1987RX7TII Жыл бұрын

  • Another masterpiece! Such a pleasure to watch! Thank you 💕

    @restoreandrepair-vn@restoreandrepair-vn Жыл бұрын

  • This was beyond awesome to watch! Excited to see the trans and diff solutions to put this power to the ground.

    @ArthurSperotto@ArthurSperotto Жыл бұрын

  • Excellent video Greg, so interesting and relaxing at the same time. Appreciate the effort buddy 👍🏼

    @boostjunky8171@boostjunky8171 Жыл бұрын

  • Dear god this is relaxing. I never knew I needed a 30 minute engine build video. Kudos for doing this with bare hands instead of gloves! That is one clean engine but still. It actually looks like you got a mani before shooting this lol. Which is the ultimate way to show your miata love.

    @iainbagnall4825@iainbagnall4825 Жыл бұрын

  • God, you make building an engine seem really easy. Thoroughly enjoyable to watch

    @kg_canuck@kg_canuck Жыл бұрын

  • That was so satisfying! Amazing to watch Greg!

    @elwindewitte@elwindewitte Жыл бұрын

  • simply beautiful, had my MX5 going on 8 years now, so far turbo'ed brakes, suspension and other little bits. been looking to rebuild and forged the engine to get to a magic 350BHP and to do it myself a cherry poppin moment and this video makes me want to do it.

    @curlywurly1987@curlywurly1987 Жыл бұрын

  • Total ASMR, those torque wrench clicks made me all tingly.

    @aristotleallen5577@aristotleallen5577 Жыл бұрын

  • Beautiful video and engine. Can't wait to see it in action

    @Az-dq1gm@Az-dq1gm Жыл бұрын

  • Absolutely beautiful work.

    @JeremyHeinks@JeremyHeinks Жыл бұрын

  • I have been waiting oh so long for this to drop thanks miata pops

    @harleydaun3847@harleydaun3847 Жыл бұрын

  • Exactly what I needed to see as motivational goals for my garage find Miata project! 😊

    @tech-mike321@tech-mike3216 ай бұрын

  • I have seen plenty of people assemble engines, you have it down to an artform. I want to be on your level one day, man.

    @cavalierliberty6838@cavalierliberty683810 ай бұрын

  • Really Zen video to watch, no chat, just letting the parts and the process tell the story. Well done sir. you earned a like & subscribe from an ND owner.

    @raventai@raventai Жыл бұрын

  • That was beautiful! Stunning engine.

    @violinmiata@violinmiata Жыл бұрын

  • Driven Racing has been amazing in my engine and the br30 worked so well, engine was broke in extremely quickly and efficiently. I was pulling 27inhg within 45 miles, following the Flying Miata break-in procedure. Glad to finally get time to watch this Creighg!

    @Friendsofdonr@Friendsofdonr Жыл бұрын

  • I don't know what it is but seeing an engine get built from the block up with the sounds of tools and clinks is one of the most therapeutic things for me.

    @rebellords74@rebellords74 Жыл бұрын

  • This is just beautiful.. Wonderful work!

    @calinponea@calinponea Жыл бұрын

  • Great music choice and sharp videography. Very satisfying to watch. Love the one-handed Allen wrench tightening. Thanks.

    @raphaelsanchez4797@raphaelsanchez4797 Жыл бұрын

  • This is so good! Props Greg for all ya do for us :)

    @ericwietzke9158@ericwietzke9158 Жыл бұрын

  • One of the best videos, I have ever seen. Could not stop watching... Amazing...

    @thomassylvestro9041@thomassylvestro90416 ай бұрын

  • Nice work 👍 . Looking forward to see it go on the road.

    @curtraaymakers6777@curtraaymakers6777 Жыл бұрын

  • Wow! That engine ❤ sweet work bro 👏🏼👌🏼🤩 ..beautifully edited too, nice job.

    @mazboengineer@mazboengineer Жыл бұрын

  • delightful to watch. I've learned so much, thank you.

    @nicpro85@nicpro852 ай бұрын

  • loved it. artwork at its finest

    @user-jy3ni9pg7u@user-jy3ni9pg7u6 ай бұрын

  • Simply nice and efficient work 🔥

    @abkarianofs@abkarianofs4 ай бұрын

  • This was an extremely satisfying video. And money shot at the end! Magnificent!!! Such a purdy motor.

    @handleymachine4421@handleymachine4421 Жыл бұрын

  • That was a work of art

    @michaelalden5119@michaelalden51197 ай бұрын

  • Greg thankyou so much for this video! I am about to build a new engine for my mk1 and you have no idea how useful this video is to me :)

    @JonnyJonDogg@JonnyJonDogg Жыл бұрын

  • What a great video to watch at 2am .. thank you

    @tunerhead@tunerhead Жыл бұрын

  • Beautiful, well done sir! Great skill and production. Fire this bad boy up!

    @tylersaupe1612@tylersaupe16125 ай бұрын

  • Incredible quality parts. 🏎

    @rafihussain@rafihussain9 ай бұрын

  • Such a great video, you've outdone yourself with this one

    @JOHN42TD@JOHN42TD Жыл бұрын

  • Simply beautiful and amazing!!! Work of art for sure! 🙂

    @gabemarshall7777@gabemarshall7777 Жыл бұрын

  • put this on the garage tv while I did my front main, good vid!

    @xxRyanxx414@xxRyanxx414 Жыл бұрын

  • I wish I had the knowledge to be able to do this. I know next to nothing about engines. But this is so fascinating. Thank you for posting

    @ryanchampney2637@ryanchampney26376 ай бұрын

  • Fabulous way to spend a half hour.❤😎 great music, no noise or talking, just assembly❤😎

    @brookesenfrance3852@brookesenfrance38528 ай бұрын

  • I would say one of the greatest videos I’ve ever watched. Tip of the hat to you sir.

    @higginsjoe@higginsjoe Жыл бұрын

  • This has been soothing and brought me peace. Fine craftsmanship and assembly. Bravo my guy Bravo 😎👏🏾👏🏾👏🏾👏🏾

    @peteypeedi973@peteypeedi973 Жыл бұрын

  • An absolute work of art!

    @CarUtopia982@CarUtopia982 Жыл бұрын

  • Gaskets & chill with Ol' Gregg on Valentine's Day? You spoil us.

    @JamesChurchill3@JamesChurchill3 Жыл бұрын
KZhead