Link for Folding Workbench written and video plans: www.etsy.com/ThomasCustomWood...
Пікірлер
Why not lock in the top first instead of holding it??
@kramersells Жыл бұрын
Looks like his arms aren’t long enough to reach the top locks until the center support is removed.
@Happilee97 Жыл бұрын
To show his strength! ❤
@wendylambert2717 Жыл бұрын
Thanks for pointing that out as well!
@David-wg7bj11 ай бұрын
😂 i think same, it was wrong step. even on deploy
@xxstreme11 ай бұрын
@@Happilee97Lool that’s sarcasm right ? He’s hand is right next to the lock while he’s holding it?
@DG.203011 ай бұрын
I’ve seen a couple of designs like this and love them. One thing i have incorporated into my design is an additional cross brace. Everyone uses a single cross brace but by adding a second brace, I can put a piece of plywood on the bottom as temporary storage for tools/small parts that I’m working with during my projects and not clutter up the top of the table.
@jasonmcmaster4968 Жыл бұрын
Great idea!
@ThomasCustomWoodworks Жыл бұрын
@@ThomasCustomWoodworks àaaa01❤❤😊❤❤❤❤❤
@Tadjourah11 ай бұрын
@@Tadjourahurther more, you can widen the holding braces that go on the wall, so as to accommodate the lower plywood piece, the the rest of the table as shown here, all in one spot.
@ALCRAN201011 ай бұрын
You made that look easy, but I still saw how much control, and muscle it took to lift that table, steady it, and hold it carefully. That sucker is heavy!
@raymarshall2995Ай бұрын
I need a dining room table I can do that with. Awesome!
@angelamapes7553 Жыл бұрын
Thanks!
@ThomasCustomWoodworks Жыл бұрын
I need a wife I can do that with.😁
@stephenowens53759 ай бұрын
Pretty awesome dude. I'd probably add 2 vertical 2x4 under the support wall beam just in case. Great job!
@johnly7688 Жыл бұрын
Thanks!
@ThomasCustomWoodworks Жыл бұрын
Agreed, I just added 2 small “L” brackets to ensure it doesn’t slip off when storing. Good job!!!
@charliedavis138410 ай бұрын
Wonderful! A kitchen table would be great like this too if one had limited space.
@HannadayfloАй бұрын
LOVE THIS! AWESOME IDEA! Making them fold and even roll is great because then they can be stacked easy! Film crews that have to recycle wood should do this and make tables and workbenches that can be reused out of the construction wood!
@user-jd5fn1uy3f8 ай бұрын
Excellent idea!!!
@Gods1servant Жыл бұрын
Thank you!
@ThomasCustomWoodworks Жыл бұрын
Pretty optimistic thinking my workbench would ever be empty, but that might work if there was a window behind it and a skip outside.
@andhewonders9 ай бұрын
One suggestion to reduce the wobbles common on this type of fold-up bench with an unsecured cross brace is to put a threaded insert into each end of the cross brace and a hole in the bottom leg brace that lined up with the insert so that a bolt with a washer will go through the leg brace and screw into the insert. A knob on the end of the bolt would make it easy to tighten by hand. As suggested in another comment, add a second cross brace and lay a piece of plywood over the cross braces will you get some temporary shelf space is a great idea. Plus a second cross piece with the same threaded insert in the ends of the cross brace and bolts through the leg brace would lock the base together so firmly there would be little or no wrack to the workbench. The negative is that it would add another minute to set up and take down times.
@papparocket19 күн бұрын
SIMPLESMENTE. EXPETACULAR. ADOREI !!!
@MyrtaLopez-wn2xz10 ай бұрын
My work bench has stuff on it from the work I do.
@anthonydewayne71211 ай бұрын
haha you have no idea how much time you saved me... lol i was about to say i'll make this over the weekend... and then i read your comment and was reminded my bench always has stuff on it too lol.
@toroah6 ай бұрын
Not to speak about having no empty wall available because off all the materials, tools and machine you (want) need to have to get the job done. 😅 Nice job and idea though !
@Chris-fl6fx3 ай бұрын
Fantastic idea for the man that has to store his tools away because he doesn’t always have a project to work on and is either working in a small workshop or his garage, (Like me).
@bcroft68bc5 ай бұрын
This is really cool. you don't happen to have a step by step video building this do you? this would be a cool weekend to weekend project.
@swiftraider759 Жыл бұрын
I have detailed written and video plans here. Enjoy! etsy.me/3IFzI34
@ThomasCustomWoodworks Жыл бұрын
Great job 👏👍👌🙌
@nickmartinez716311 ай бұрын
Thank you!
@ThomasCustomWoodworks11 ай бұрын
That would be the most useless thing for my workbench to do, it is literally never cleared XD
@user-hm9fv9xk7x9 ай бұрын
haha i agree
@ShivamSharma-zd8lw5 ай бұрын
Sangat praktis dan simpel 👍
@mnchannel9 ай бұрын
Nice table.
@Normal1855 Жыл бұрын
Assalam u Alaikum Wow good idea brother..
@AmjadAli-ej3dg11 ай бұрын
Amei, pra quem tem pouco espaço como eu, é uma maravilha. Valeu a dica.
@valnicebarbosa587110 ай бұрын
Muy buena idea 👏👏👏👏👏 pero sería bueno si nos pasa, un video cómo se hace la mesa, ho las medidas 🙏🙏🙏 gracias !!!
@faustovera109711 ай бұрын
Excelente!! Felicitaciones!!!
@malabarista2023 Жыл бұрын
excelente! quem sabe um dia eu possa fazer assim com todos os meus móveis. sonho isso sempre! tenho muitos gatos iria me ajudar bastante. incrível genial!👏👏💯👍
@nubiagoncalves850510 ай бұрын
C'est Super !❤😁
@MarcelMarcheschi10 ай бұрын
Clever!
@calvinchung203611 ай бұрын
Nice ideass!!! *talented skill😊😊😊
@RusydiRabbani-kf1jk8 ай бұрын
É show de bola ficou muito legal parabéns 👍 👍 👍 👍
@dandagaiola47509 ай бұрын
Excelente trabalho 💯🇧🇷🔥🔥
@veralpereira9 ай бұрын
A brilliant design, but I would improve a couple things. Namely, spring loaded locking pegs for the legs instead of the cross bar, and also make the bench long enough to accommodate traditional casters instead of the side mounted ones that would buckle under heavy loads over time.
@graceoverallАй бұрын
Thanks for going to effort to put on line. Love mine
@tomnewland87157 ай бұрын
Listen fantastic idea for workshop whether it be for a woman or men thanks for showing❤❤❤❤❤❤
@lindapack322911 ай бұрын
You’re welcome!
@ThomasCustomWoodworks11 ай бұрын
Muy buena idea, solo creo que cuando la subes debemos poner los cerrojos primero y después quitar el (perno ) palo y doblar las patas. Exelente idea 🎉
@GenarusMatus-ou6oq11 ай бұрын
Thank you!
@ThomasCustomWoodworks11 ай бұрын
Super cereative! Good day! Thanks shareit!
@wenepzoli11 ай бұрын
Ideia genial parabéns gostei muito
@AnaCristina-hh9xe11 ай бұрын
GREAT!!!! 👍
@JTodd-fp2ve10 ай бұрын
عمل متقن واصل
@user-sr3xi9nj1h11 ай бұрын
Wow great idea🎉
@jtlifechannel91343 ай бұрын
Wait. Before I start I have to reassemble my work bench...again.
@jerryklooster43810 ай бұрын
Awesome space saver. Idea
@Zenforya3 ай бұрын
Seen these! Wanted to do one but my bench space changes so much
@buildandbescene2 күн бұрын
ilmu yang bermanfaat
@tedihermawan6105 Жыл бұрын
Top essa ideia👏👏👏👏👏👏
@silvaniasiqueira545610 ай бұрын
What is this music ? Friggin' love it !
@boboraratheviper8 ай бұрын
That’s amazing
@gabrielmorales10664 ай бұрын
Great idea, I'm curious how sturdy it stays in place with those casters. Depending on the work being done I imagine a lot of jimmys and shakes?
@NemesisVNV3 ай бұрын
Excelente trabalho
@josefreitasoliveira454711 ай бұрын
Awesomer!
@h.d.s.s.38379 ай бұрын
Very good
@ezzatramadan598711 ай бұрын
Thank you!
@ThomasCustomWoodworks11 ай бұрын
👏🏻👏🏻👏🏻👏🏻💪🏻
@FreeWilly202111 ай бұрын
روعة .. Nice job ♥️🙏
@CAESAR_PUTIN_LOVERS11 ай бұрын
I need this so bad
@mochafit423 ай бұрын
Wow Excellent superb very nice
@qualitydigitalvision11 ай бұрын
You did a great job awesome😊😊😊😊😊😊
@jerrbear15064 ай бұрын
Great idea.
@Da1stDay Жыл бұрын
Let's see how that works out for you as you get older. The best inventions are the ones where even a senior citizen can use it or do it.
@ZZZ-qy8wj9 ай бұрын
Jizzaxda is very good place to live and enjoy the same thing as soon va boshqa ko'ngilochar dasturlar milliy va har bir inson o'z oila a'zolari bilan bir necha yil ichida bir
a simple latch on the top bracket would make life a lot easier , like a garden gate latch
@tomthompson74008 ай бұрын
Ketny ka he
@abdullahjan88246 ай бұрын
@@abdullahjan8824 probably
@tomthompson74006 ай бұрын
With the 2 black bolts at the top, could you not have used the table legs support beam, the one you put and rest on the top of the table, after putting the table on the wall ? Use the support beam in a way to hold the table onto the wall, seeing as it is wide and would require a few wooden twist wedges to hold the beam. Just seems 2 little bolts are not strong enough and the weight of the table will pull them off the wall
@aaronag78769 ай бұрын
Excellent
@deldom1748 ай бұрын
Do you have a plan for this table?
@stephencochran6843 Жыл бұрын
Here you go! www.etsy.com/listing/1370607572/
@ThomasCustomWoodworks Жыл бұрын
song name?
@derekhobbs16339 ай бұрын
Me gustaría ver el vídeo de cómo lo hiciste, materiales y medidas
@marlonleonid5 ай бұрын
Yeah man, too cool!
@FrancisFurtak6 ай бұрын
That's Badass 😊
@nancybarrett626611 ай бұрын
Thank you!
@ThomasCustomWoodworks11 ай бұрын
very cool idea
@frankbullitt45569 ай бұрын
Thank you! Cheers!
@ThomasCustomWoodworks9 ай бұрын
For real. Wow. Great. I like it ❤
@anthonymwangi11 ай бұрын
Thank you!
@ThomasCustomWoodworks11 ай бұрын
I Like Those Casters, What Are They Called, Where Can I Get Those? Great Bench Idea By The Way, Very Creative!
@joec324729 күн бұрын
Yes it can. Cuz I just built one exactly like this
@colewomble70787 ай бұрын
Amazing
@bienletemknowchannel8 ай бұрын
Cool 👍👍
@joebourke1018 Жыл бұрын
Thanks!
@ThomasCustomWoodworks Жыл бұрын
Dope
@Princeof1000Enemies Жыл бұрын
¡Great!
@mauriciod5611 ай бұрын
I add chain so when bringing down it doesn't break or hurt anyone
@crystalvanchure27594 ай бұрын
Wonderful
@ZulfiqarAli-rf6fp11 ай бұрын
👏👏👏👏👏👏💯👍✌️
@marciochaves470011 ай бұрын
I like it 👍👍
@tukangkayujawa97411 ай бұрын
I dig it, but I'd try to work a french cleat in there somehow . LOL
@Nusremmus5 ай бұрын
Seem like it would be a bit wobble without any diagonal bracing, no? Can you open it and move it side to side?
@goranhinic92425 ай бұрын
Cakep buat meja nya irit tempat
@linamulina57169 ай бұрын
Thanks!
@ThomasCustomWoodworks9 ай бұрын
Might want a back plate. Your wall is not gonna like that edge when you lift it up each time
@FknNefFy11 ай бұрын
Looks like he already damaged the dry wall. (Bottom right)
@reynoldmiguel646310 ай бұрын
CON LA MITAD DE MADERA QUEDA FUERTE Y MÁS MANEJABLE .
@simonjaviergarciaruiz905511 ай бұрын
Eu vanda barros. Maravilha.
@luizcoloniese27009 ай бұрын
Is the top it’s plywood or what u used
@yoviss-vsz88519 ай бұрын
Genial😊
@javierortega802411 ай бұрын
Mantap sekali
@azwarchaniago559210 ай бұрын
Mantap bosqu
@VlogAntoTv9 ай бұрын
Steel One For Metal Works possible right?!
@Indiesmoker258 ай бұрын
What happens when the bottom part slips out and hits all 8 toes?
@MUTzSparky2 ай бұрын
If my ladder is in the way, I do something else. All joking aside, gorgeous idea, great craftsmanship, but you can’t use it in under a few minutes, assuming you put nothing in front of it you have to move (big workbench shaped spots get filled quickly in my shop) I guess I just don’t see the overall point unless you don’t need it that often, if that’s it, but a folding table for $50
@getinkt3388 ай бұрын
Bonne idée mai un peus compliqué
@mahfoud514Ай бұрын
Bravo or tej .
@agrondyrmishi945111 ай бұрын
AMEIZING
@jorgebiase33489 ай бұрын
Thank you!
@ThomasCustomWoodworks9 ай бұрын
I believe there’s a better sequence of stowing it.
@dkpbyt11 ай бұрын
Nice🎉🎉🎉🎉
@Sophiaboneu_6 ай бұрын
Secure and lock the table first mate!!! Not safe😅
@SUPERFLASH-activate10 ай бұрын
Do you have the specs for a design like this?
@Primo540Ай бұрын
Yes! Just go to thomascustomwoodworks.com for full plans.
Why not lock in the top first instead of holding it??
Looks like his arms aren’t long enough to reach the top locks until the center support is removed.
To show his strength! ❤
Thanks for pointing that out as well!
😂 i think same, it was wrong step. even on deploy
@@Happilee97Lool that’s sarcasm right ? He’s hand is right next to the lock while he’s holding it?
I’ve seen a couple of designs like this and love them. One thing i have incorporated into my design is an additional cross brace. Everyone uses a single cross brace but by adding a second brace, I can put a piece of plywood on the bottom as temporary storage for tools/small parts that I’m working with during my projects and not clutter up the top of the table.
Great idea!
@@ThomasCustomWoodworks àaaa01❤❤😊❤❤❤❤❤
@@Tadjourahurther more, you can widen the holding braces that go on the wall, so as to accommodate the lower plywood piece, the the rest of the table as shown here, all in one spot.
You made that look easy, but I still saw how much control, and muscle it took to lift that table, steady it, and hold it carefully. That sucker is heavy!
I need a dining room table I can do that with. Awesome!
Thanks!
I need a wife I can do that with.😁
Pretty awesome dude. I'd probably add 2 vertical 2x4 under the support wall beam just in case. Great job!
Thanks!
Agreed, I just added 2 small “L” brackets to ensure it doesn’t slip off when storing. Good job!!!
Wonderful! A kitchen table would be great like this too if one had limited space.
LOVE THIS! AWESOME IDEA! Making them fold and even roll is great because then they can be stacked easy! Film crews that have to recycle wood should do this and make tables and workbenches that can be reused out of the construction wood!
Excellent idea!!!
Thank you!
Pretty optimistic thinking my workbench would ever be empty, but that might work if there was a window behind it and a skip outside.
One suggestion to reduce the wobbles common on this type of fold-up bench with an unsecured cross brace is to put a threaded insert into each end of the cross brace and a hole in the bottom leg brace that lined up with the insert so that a bolt with a washer will go through the leg brace and screw into the insert. A knob on the end of the bolt would make it easy to tighten by hand. As suggested in another comment, add a second cross brace and lay a piece of plywood over the cross braces will you get some temporary shelf space is a great idea. Plus a second cross piece with the same threaded insert in the ends of the cross brace and bolts through the leg brace would lock the base together so firmly there would be little or no wrack to the workbench. The negative is that it would add another minute to set up and take down times.
SIMPLESMENTE. EXPETACULAR. ADOREI !!!
My work bench has stuff on it from the work I do.
haha you have no idea how much time you saved me... lol i was about to say i'll make this over the weekend... and then i read your comment and was reminded my bench always has stuff on it too lol.
Not to speak about having no empty wall available because off all the materials, tools and machine you (want) need to have to get the job done. 😅 Nice job and idea though !
Fantastic idea for the man that has to store his tools away because he doesn’t always have a project to work on and is either working in a small workshop or his garage, (Like me).
This is really cool. you don't happen to have a step by step video building this do you? this would be a cool weekend to weekend project.
I have detailed written and video plans here. Enjoy! etsy.me/3IFzI34
Great job 👏👍👌🙌
Thank you!
That would be the most useless thing for my workbench to do, it is literally never cleared XD
haha i agree
Sangat praktis dan simpel 👍
Nice table.
Assalam u Alaikum Wow good idea brother..
Amei, pra quem tem pouco espaço como eu, é uma maravilha. Valeu a dica.
Muy buena idea 👏👏👏👏👏 pero sería bueno si nos pasa, un video cómo se hace la mesa, ho las medidas 🙏🙏🙏 gracias !!!
Excelente!! Felicitaciones!!!
excelente! quem sabe um dia eu possa fazer assim com todos os meus móveis. sonho isso sempre! tenho muitos gatos iria me ajudar bastante. incrível genial!👏👏💯👍
C'est Super !❤😁
Clever!
Nice ideass!!! *talented skill😊😊😊
É show de bola ficou muito legal parabéns 👍 👍 👍 👍
Excelente trabalho 💯🇧🇷🔥🔥
A brilliant design, but I would improve a couple things. Namely, spring loaded locking pegs for the legs instead of the cross bar, and also make the bench long enough to accommodate traditional casters instead of the side mounted ones that would buckle under heavy loads over time.
Thanks for going to effort to put on line. Love mine
Listen fantastic idea for workshop whether it be for a woman or men thanks for showing❤❤❤❤❤❤
You’re welcome!
Muy buena idea, solo creo que cuando la subes debemos poner los cerrojos primero y después quitar el (perno ) palo y doblar las patas. Exelente idea 🎉
Thank you!
Super cereative! Good day! Thanks shareit!
Ideia genial parabéns gostei muito
GREAT!!!! 👍
عمل متقن واصل
Wow great idea🎉
Wait. Before I start I have to reassemble my work bench...again.
Awesome space saver. Idea
Seen these! Wanted to do one but my bench space changes so much
ilmu yang bermanfaat
Top essa ideia👏👏👏👏👏👏
What is this music ? Friggin' love it !
That’s amazing
Great idea, I'm curious how sturdy it stays in place with those casters. Depending on the work being done I imagine a lot of jimmys and shakes?
Excelente trabalho
Awesomer!
Very good
Thank you!
👏🏻👏🏻👏🏻👏🏻💪🏻
روعة .. Nice job ♥️🙏
I need this so bad
Wow Excellent superb very nice
You did a great job awesome😊😊😊😊😊😊
Great idea.
Let's see how that works out for you as you get older. The best inventions are the ones where even a senior citizen can use it or do it.
Jizzaxda is very good place to live and enjoy the same thing as soon va boshqa ko'ngilochar dasturlar milliy va har bir inson o'z oila a'zolari bilan bir necha yil ichida bir
壁収納なんて…最高ですよね。😆 ウッドデッキも付け足したデッキを、こんな風に上げて収納できるようにしたいな
a simple latch on the top bracket would make life a lot easier , like a garden gate latch
Ketny ka he
@@abdullahjan8824 probably
With the 2 black bolts at the top, could you not have used the table legs support beam, the one you put and rest on the top of the table, after putting the table on the wall ? Use the support beam in a way to hold the table onto the wall, seeing as it is wide and would require a few wooden twist wedges to hold the beam. Just seems 2 little bolts are not strong enough and the weight of the table will pull them off the wall
Excellent
Do you have a plan for this table?
Here you go! www.etsy.com/listing/1370607572/
song name?
Me gustaría ver el vídeo de cómo lo hiciste, materiales y medidas
Yeah man, too cool!
That's Badass 😊
Thank you!
very cool idea
Thank you! Cheers!
For real. Wow. Great. I like it ❤
Thank you!
I Like Those Casters, What Are They Called, Where Can I Get Those? Great Bench Idea By The Way, Very Creative!
Yes it can. Cuz I just built one exactly like this
Amazing
Cool 👍👍
Thanks!
Dope
¡Great!
I add chain so when bringing down it doesn't break or hurt anyone
Wonderful
👏👏👏👏👏👏💯👍✌️
I like it 👍👍
I dig it, but I'd try to work a french cleat in there somehow . LOL
Seem like it would be a bit wobble without any diagonal bracing, no? Can you open it and move it side to side?
Cakep buat meja nya irit tempat
Thanks!
Might want a back plate. Your wall is not gonna like that edge when you lift it up each time
Looks like he already damaged the dry wall. (Bottom right)
CON LA MITAD DE MADERA QUEDA FUERTE Y MÁS MANEJABLE .
Eu vanda barros. Maravilha.
Is the top it’s plywood or what u used
Genial😊
Mantap sekali
Mantap bosqu
Steel One For Metal Works possible right?!
What happens when the bottom part slips out and hits all 8 toes?
If my ladder is in the way, I do something else. All joking aside, gorgeous idea, great craftsmanship, but you can’t use it in under a few minutes, assuming you put nothing in front of it you have to move (big workbench shaped spots get filled quickly in my shop) I guess I just don’t see the overall point unless you don’t need it that often, if that’s it, but a folding table for $50
Bonne idée mai un peus compliqué
Bravo or tej .
AMEIZING
Thank you!
I believe there’s a better sequence of stowing it.
Nice🎉🎉🎉🎉
Secure and lock the table first mate!!! Not safe😅
Do you have the specs for a design like this?
Yes! Just go to thomascustomwoodworks.com for full plans.
Ottimo salvaspazio 🔥🔥🔥
Bisa juga buat tempat tidur juga kl ya
Perfeito 👌