How to Make a Tesla Coil at Home | Wireless Power Transfer
2017 ж. 7 Мау.
3 616 305 Рет қаралды
Learn how to make a tesla coil which can transfer electric power through air that is known as wireless power transfer.
Circuit Diagram on EasyEDA-goo.gl/vy3f1I
Required Material-
1. PVC Pipe 9cm
2. 28AWG Copper Wire www.flyrobo.in/0.1mm-copper-s...
3. 2N2222 Transistor- www.flyrobo.in/2n2222-switchi...
4. 2.2k ohm Resistor
5. 9v Battery and Connector
6. ON OFF Switch etc.
Thanks For Watching my Videos.
My Social Links
Facebook- / tapendramandal
Instagram- / tapendramandal
Twitter- / tapendramandal
Music Provided by NCS Release-
Different Heaven - Nekozilla- • Different Heaven - Nek...
Jim Yosef - Arrow- • Jim Yosef - Arrow | Ho...
Nikola Tesla, one of the greatest minds in history.
Even greater than Einstein
The greatest
@@pranjalbiswass Nope
@@achyuththouta6957 yess
@@pranjalbiswass No. Tesla's inventions don't even come close to the complexity of general relativity
Those who are watching after 6 years from the uploaded date😅
First, thank you Tapendra for this excellent video! I made this and it works - but it took me a while to get it all right. Some speedbumps I encountered: 1. Be sure to sand or scrape the insulation completely off both ends of the secondary coil. Check continuity between the two ends (I used an inexpensive multimeter) to insure that the insulation is off. I thought I had a good connection until I tested it and found that I hadn't gotten all the insulation off. 2. Use a 22K ohm resistor, not the 2.2K indicated. Using a 2.2K will fry the transistor pretty quickly. 3. Be sure to wind the primary in the opposite direction of the secondary. Four turns seemed to work best for me, it can be tightly wound around the base of the secondary coil, and neatly taped to it.
How did u get the insulation on
@@kamleshkumaryadav9360 it is enameled copper wire. It already has insulation although you can't see it.
Tysm for ur prompt reply. Is there anything more to be considered while making this so that it works perfectly ?
@@kamleshkumaryadav9360 I blew more than one transistor due to overheating so make sure you have spares (mine came in a bag of 200). I'm not quite sure why this happened - I'm an amateur at this. Using a fresh 9-volt battery seemed to overheat the transistor, which leads me to think that maybe the resistor needs to be an even higher value. However, at this point it is stable and working consistently with a 22.2K ohm resistor so I'm not sure. Just don't give up, it WILL work.
@@kamleshkumaryadav9360 One more thing - I found that using a small breadboard to wire up the transistor made it very simple to replace it if it overheated.
amaaaaaazing my friend . lOVE AND RESPECT-> FROM INDIA
I made this coil and it didn't work at first then I started to search for flaws on internet and I got the solution What I did was I increased the number of primary coil turn from 3 to 4 it didn't work then I increased it to 5 turns also then it didn't work. Then I replace the primary coil connection that is one which was connected to transformer I replaced it to connection on the switch and vice versa And boom the flurocent tube light started to glow just when I was going to give up on it So please don't give up, search for solution and you guys will also be succeed 😉😎😎
Yes I highly agree! We were in the same condition when I was attempting this but I don't give up because I will fail in school.
Please help me out as well
I have been doing this from 2 days..,it didnt work...do u have any solution ?
@@you-know-who3873 try increasing number of turns of primary coil (which is the less number of coil) If then also it didn't work try to reswitch the position of the primary coil that is connect wire on the switch to the transistor and so for the other end
@@you-know-who3873 kzhead.info/sun/dKatZ6Zub55vaJE/bejne.html Refer this video for correction it helped me last time
I liked the video cause of the song Arrow from Jim Yossef. ;) I love it. This tutorial is Really easy to understand, and really Cool ! thank you so much
So simple - a fun and affordable project to do.
Teri bhen ki
Thank you for this circuit. I was able to power a multimeter from a few inches away with a receiver coil antenna,with six volts on the coil.But then I put nine volts on the coil, and I was able to power it without a receiver antenna! I made it with some plastic coated insulated copper wire. Also I could get an RF reading on emf meter a foot away from it! Thank you very much!😊
what kind of bulb did you use?
Great idea bro you saved my school project
Which wire you use to lap around the copper road
Thanks bro for showing how to make it .it really helped me
Hey what kind of ball is that your wrapping in aluminum foil. I don't see it in the description of sluppies
sir Nicola Tesla , my favorite scientist and this is one of many great experiments!
He was an inventor
Mee to
Me too
Great bro this scientific projects
He was an inventor (2)
Great tutorial and damn easy to make. Thanx for teaching such a easy way to make Tesla coil 👏👏👏
+Somnath Banerjee thanks for ur nice feedback
@@tapendramandal bro can you tell how many meters will come if i order the 28 awg wire from your given link?
Can someone give a list of what the items are needed and written instructions to make this.
The Tesla coil is a device that uses high voltage to create an electrical discharge. This discharge can be used to create sparks, or it can be used to power an electrical load. The Tesla coil is named after its inventor, Nikola Tesla. There are several ways to create the high voltage needed for a Tesla coil. One way is to use a spark gap. A spark gap is a device that creates a spark when a high voltage is applied to it. A spark gap can be made from two pieces of metal separated by a gap of air. When the high voltage is applied, it creates an electric arc across the gap. This arc will produce sparks that can be used to power an electrical load or create sparks in the air. Another way to create the high voltage needed for a Tesla coil is by using a transistor.
Did it work?
Idk if you are ever gonna read this but I made this as a physics project. It worked and I’ll probably get perfect grade. With that said, I just wanted to tell you that you are the best and a lifesaver. P.S: liked and subscribed with notifications on, so keep up the good work
What type of wire did you use for the white wire?
@@galacticlava1475 I think normal one
did you order the copper wire from the site provided in link.....if yes was it worth?
Sorry I was wrong you have to use enameled copper wire
@@memo0206 I bought it at a local shop
The copper wire pipe looked like max level hidden Tesla in COC 😂
Exactly😂😂
Yes
Red Alert Teslas are where it's at
Yes
Yes
great man great !!! what a project
Yeh!!!!!! It is working. Thank you now I can take it in science exhibition in my school
Kyo fek rha h
Can you please tell me the kind of the resistor? Is it 2.2K ? Or 22K??
Can we use another copper wire awg? The link you mentioned next to the copper wire in description leads me to a 38 awg wire?
Great soothing music to learn by and study electicity. Make sure you use it on all your videos (which I will unfortunately not watch...)
kzhead.info/sun/dLawY8ese6OsgJE/bejne.html
Thanks for your project video. It helps to my son for his science expo
Really bro
Bro can u give me the list of apparatus?
Thank you for your vedio... It helps me a lot
Thanks bro for it Its fabulous keep it up bro
Thank you very much! ❤️
You’re awesome man, I appreciate the clarity(: I need it when it comes to circuitry
Can we touch the aluminum foil if switch is on and how much volt is going
@@dhyeyparmar7089 well it is a 9v battery
@@dhyeyparmar7089 Can you tell what was that white wire??
@@palward1996 can you tell what was that white wire? Is it a spring on the notebook?
@@DeFi.Nabeel aluminum wire
so cool thanks for helping me out with my science project man
What is the AWG of 3 turn coil
Hi! I just want to know what is that white wire with 3 turns
Thank you so much! This totally worked amazing for my science fair project. Thanks!!!
did you order the copper wire from the site provided in link.....if yes was it worth?
@@memo0206 I actually didn’t even realize that there was a link. I bough the copper wire off amazon
@@ava-gz5sn can u pls provide the link?
@@memo0206 sure
@@memo0206 also this is a good time to mention I had the wrong gage wire by 1 but it still worked
Nice bro working perfect
How many turns did you made
I made this Tesla coil & it worked ! Good Video👏👏
Bhai coil ko kitna raud kiya tha
lol ye chutiya jhut bol raha aisa nhi hota hai... its fake... common sense... tesla coil aise nhi chalta...
It works👍I made it for my school science competition
wire wounding part was the best😍👌
It really works. I have made it for science project . Thanks for Project.
Bhai tera phone no dena
Because I need it for my son project
I tried it and it is working , if yours is not working then try giving the connection of the primary coil in the opposite way or try using the 22k resistor and try adding a limiting resistor to the negative end of the battery clip
How i give the connection in the opposite way ?
Hii,I am making this project done all the connection possible with 2.2 k and 20k resistor too but bulb is not glowing.Can you please help me with that?
Can u plz tell me what is that white wire??
@@ayushi991it’s a 22k resister
tapendra!!! very great👏👏👏
Nikola tesla was way ahead of his time. So much creativity and intelligence in the same person. Words are less to describe him.
Yes. I made it, it was working. I got a gold medal in my school exhibition.
😂😂😂😂badi badi fek aur
@@durgeshjadhav5151 nice
Bhai kaisa banaya
Hlo bro
@nirjhar does it work properly
I miss those days that I used this experiment in our Science Fair.
How do you do it on your science fair?
@@jijijija1448 I followed this video and got an awesome outcome.
@@jijijija1448 I think I've lost it, but I am not good at constructing research paper.
@@zenenberg3268 Hello how much does it cost to make tesla coil??
@@zenenberg3268 please tell how much u spend for it please I want to do for my science exhibition
thanks it works, works with TIP41C transistor too, im using 5v phone charger/powerbank
and I suggest to use tip41c for thermal stabilisation, cus 2n222 just too hot, and tip41c is easy to equip with heatsink
Will any transistor work? O4 at least most of them? Like one from a tv or...?
And what resistor did you used? 2.2K or 22K?? Please reply
Well done keep it up!!!
I recently constructed a Solid-state Tesla-coil just like this one here with no affect on fluorescent tubes or such bulbs. It only generates Theremin sound effects in a nearby AM Radio Receiver.
Watch this tesla coil 100% kzhead.info/sun/Z5imY7SxcGWVnqM/bejne.html
@@Rohitkumar-dr8jy This video posting was no help - - Just cool to look at
@@Jeffrey314159 what help u want
magic idea....its new...great video...10k likes from my side
+TecH BoyS ToyS thanks bro.
no white colour wire
Tapendra Mandal sir help me which resistance to use 2.2k or 22k ohm?
Tapendra Mandal bro ek dc motor chala ke dikhao es tesla se please
Motor nhi chalega is se only cfl jalta h
can u plz tell me the short circuit current of this coil or how the details of max wattage taking capacity🙏
Imma use this for the science fair thanks :)
本当に素晴らしい！ Excellent! I make it ,too!!
Please can you eplaine?
@@sciencetutor635 explain
@@sciencetutor635 You can also find this kind of videos here..kzhead.info/sun/ktKmgqqrrHWXmI0/bejne.html
@@Kurtfruelda11 You can also find this kind of videos here..kzhead.info/sun/ktKmgqqrrHWXmI0/bejne.html
Really wonderful! Excellent! I make it , too!!
I did this experiment , It's working Thank you 👌👏👍🏻👍🏻
Shivu Kumar KR it's working
what value of capacitor u used 22k or 2.2k?
How did you do it? Pls. Tell me
Bai ye sachme kam karta hai plz reply me
ma 1 month sa lagi hui hu mera nhi chal raha
Great experiment
AWESOME MAN! Physics is a true bliss. Thanks for this 🤘
Bro so much thanks 😊 I did this project and worked at 3rd time Thank you so much 🙏
Hlo
Ultra legends are only searching here about this ...either works or not! Can u raise u r ✋.
😁
fake hai 200₹ phuk dale proper way batate nhi 😢😢 tesla coil to hota hai but ye pata nhi kis trh banye hai 😢
@@asthamaurya7512bhai 1000 phuk diye phir bhi ni kaam kar ra dc bulb chahiye ya ac pta ni😭😭
@@kinggamerz5805 ek channel hai Mr.indian hacker name se unhone proper way batay hai usse kam kr jayega bas unka channel ka name aur tesla coil likhke search kro
This experiment had worked for us 💥💥
For real?? Coz I have some questions 😅
Op brother.Good job😁😁😁😍😍😍
beautiful coil bro gonna try it myself il be back with an update love the videos
Is it work
@@abdalmajeedafandi5805 i made it just like the video but transistor just gets really warm no wireless energy
@@jeffcarpenter7721 thank u
does it work bruv?
@@samrudh7177 it just heats up transistor alot not sure why
Whether the measurements of pipe can vary or same as in the video
I have made this project..and it works 💯💯🙏
Tell me how it works .. Coz my project isn't working.. Plzz help me
Pls tell me that what size copper wire should be uses?
Badass.. I like the music better too 😆
⚡Nice project.. 🙂👌 Good job 😋
IT's working✌️✌️✌️👍👍👍👍👍
Can i use ani light ?
Super amazing wow exellent 👌👌👏👏👍👍😎😎🙏🙏🇮🇳🇮🇳
Greate work bro Keep it up impressive
❤❤❤❤❤ ﷲﷻ آپ کو سلامت رکھے آمین
Pretty cool 😎 bro nice PROJECT dude....😘 I WILL TRY DEFINITELY... 😋
+deepak pendyala thanks bro
Don't try it's just a waste of time... it doesn't work
@@Notlegendshadowyt its working..
created successfully. only use 2.7k ohm resistor. 2.2 was not available on the local shop. thank you so much.
Bro what kinda ball you used
Can we use 22k ohm resistor????
@@gauriagrawal3974 yes that is better than 2.2k ohm
@@kingdreadlxrd any thing that is circular
i hv onedout u can use dc power source and amplify the voltage on this , but u apply on a ac bulb 💡 how the bupb glow , im just curious ,plz reply
Exellent work thank you
Just a question... I was wondering if the resistor was added so the transistor did not blow, or if it was so this was not actually dangerous (i mean its only 9 volts)
They could have used heatsink
Amazing .I used it as my science project.It works...
I like "Nikol"Tesla I always try this experiment.👍
Crushed with this Technology
Can we take any value of resistor in that model?
No
You can watch Resistor calculation by freak engineer And Tesla coil by freak engineer
33 ohm 1/4 watts
kzhead.info/sun/dLawY8ese6OsgJE/bejne.html
What is the potential difference across coil L2 ( the one with 3 turns)? Can you please check in multimeter and reply.
After 2yrs is your project done 🤣
he was a great inventor
brother...what is the configuration of light that used? And what is the name of that paper used in the top to rap the ball?
The great Genius - I’m a great fan of Nikola Tesla 💕
Mi 2
kzhead.info/sun/dLawY8ese6OsgJE/bejne.html
Big up my man Tesla what a great man
Thank you so amazing!!
Superb !!
Thanks for the idea it's working I made it and today is our science exibition 😊😊😊😊👌👌👍👍
Mehak Gupta plz tell how to do😥😥😥
What length of copper wire is needed
I am study in 8th class and I make it but it is not working pleas help me my my electronic teacher says that is impossible and I challenged to teacher i will
Yes it is possible all you need to do is following this video surely it will work 👍👍 best of luck
Just make sure that you are using the correct transistor and resistance and solder all connections properly
Can i use a 6v.5ah battery for this .please reply me,i want to made early. Please
Yes you can use
My only evergreen favorite scientist SIR NIKOLA TESLA
Bro thank you 1 got the first 🥇🏆 rank in science fare
Iam useing dor my sience project taq
Thank you it worked for my Science project.but how much Wt was the bulb
Doesn't matter
Just a small query if that is sand paper which is used to clear the insulation of the metallic wire
Bro super bro Vera level😅💕
i love it i love it i love it tanks so much ❣❤ i ll'l do it in my school 😭😭💙💙
How does it work tell me please
Hey there, I hope someone might help me... I built a coil similar to the second one explained (with a transistor) and the voltage doesn't get higher than 9V (like the battery has), instead it should induce a much higher voltage. Could it be because my transistor broke during the soldering process (because of the heat)? Or is there another reason... Also, it should make an energy saving lamp glow through just holding it near the coil. But that doesn't work either...
It sounds like your transistor has broken. If the voltage measured is DC then the transistor isn't switching. It should be a high frequency AC output at the 3 turn primary (of 9 volts). It should also be 9x100v turns ratio on the secondary (900v)
Hey man this circute is fake because 9 volt cant make high voltage with just a simple coiling And transistor just do the switch not mor
@@amirhasan_t6762 Hi. I just want to know your opinion about this thing. You think this really work? I'm actually going to do this for my project, and I'm doubting if this will really work or not😣
@@hannahmaenacasi742now i think its sound good to do yes it can work work but idont no about its performenc Its may have a low level performenc
@@amirhasan_t6762 Is the specific type of transistor and resistor really matter? Coz at the store I went they have no available 2N2222A transistor. You think it'll have an affect to the connection of the invention?
can i build one of these scaled up to power my house?
Plz can you tell me if I added 10 more batteries in series connection so will it work and what type of transistor I will be needed plz answer before Monday 🙏🙏
I have made the tesla coil and it works.. I have used 22k Resistor.. Be sure to use a top load (any metallic conductor) for better results, 2-3 turns of primary gave best results for my setup ( 200+ windings of secondary)... If u guys have any doubts mention them. PS: Make sure that current in the primary flows in the direction opposite to which secondary is winded. Don't switch on the circuit for more than 15 seconds otherwise it would fry the transistor.
how many bulbs does it light up???
how much coper wire required bro
@@Lucifer-pj8vcbetter take around 50-75g copper wire (28 AWG) it's cheap tho
Which 28awg is it bare or enameled
@@adngamingarts288 enameled better cus u can scap off the enamel at the ends if u want
I made this 👌👌 its really works 😍😍😍
Please tell me bro
how much meter copper wire did you use
So simple that everyone can try it ..........
Very nice 👌
It is not fake. I used copper wire instead of white wire, and it worked. you can not skip toroid when you make this
He man how can't it work it only works on ac voltage
does we need exact 300 secondary coil rotation or it can be more??
its your wish how much you can
Because of battry current passes through coil and making induced current increases the no of tones and area will provides more induce emf
How can an induced current be generated when a direct current is used?
I tried it but it wasnt giving any output. I used 35 gauge wire. Can you please tell me some mistakes which i could have commited while setup?
Great job! Only problem is that I think this is a slayer exciter circuit, not a Tesla coil. Anyone out there that can correct me please?
nice
What was that yellow ball you used in the aluminum wrap please???
it is limited for power light ? for exemple it is possible to use light 600w with ? and it is the same power thanwhen it s connecting in courant house ??