How To Have A Insanely Clean 12 Volt Setup!
2024 ж. 12 Мам.
39 150 Рет қаралды
#build #4x4 #offroad
Making the engine bay a whole lot nicer with a full re wire of the battery area, Using a sub $100 part to tidy up the wiring I had to share this with you guys! Its something I've always hated is messy wires and this little part makes it much safer and a whole lot neater to have all your accessories wired into your 4x4
Merch: roamlyfe.com
INSTAGRAM: Roam_Lyfe
tags: build cost 4wd how to build a rig lift patrol cruiser suspension building offroad overlanding custom ute flat bed tray superior engineering suspension travel flex huge lift remote res coils built build how to fit flexy down travel 4j 4jj1 4jj3 patrol swap gu gq how to build motor swap fabrication intake tune exhuast
One small criticism for your attention: You have a potential rub point on the A/C line to what I presume is either the non-fuse protected Alt or Starter cable. Might want to address that before it becomes an issue.
I wouldn’t be having that heat shield touching the brake lines, over time you will eventually wear a hole through the line. Also label your fuses, makes diagnosing any problems easier later on
Wow what a good looking build, well done mate! One crit if I may: it is always best to leave heat shields unpainted. The silver reflects heat much better than any other colour or surface. Black is the worst.
Great build. So neat and tidy. I also picked up some pointers on how to make my engine bay a bit neater. Can’t wait to see the numbers out of this motor.
Such an awesome build. Good work Dude.
Looking good keep up the good work love your content
Nice job. Really cool
Great job 👏 its awesome
Great episode mate. Move the heat shield off a little bit
i'd like to see if you can install a hologram-ish heads-up display. that would look so cool
Love watching the built progress Tom, What head unit are you running? Any good?
The turbo nosies sounds amazing
alternative to common line large fuseblock you used: get a fuseblock from a late model golf. cheaper and better quality than the aftermarket stuff
Can’t wait to see what the dino has install 👍🏽
Gday, it’s the little bits that make the most difference, the wiring looks a shit load better, im keen to see it on the dyno now, top job mate, cheers
Thanks matty!!
hey @RoamLyfe any chance you can put up a parts list either here or IG for stuff you used in the 12v system? those battery terminals look mint!
Dont forget to label the wire.....printed labels and some clear heat shrink over the top and schmicko.
what new crimping tool did you buy to replace your old one? I also need a good one :)
Do you have a link to that fuse block?
Wats your data computer your running mate? I had the eds one from kings and it was complete garbage! Would trip my immobiliser in my dmax! Chinese crap. I’m mainly after it to see my coolant and trans temp?
Do you have a link to the product ? Great idea definitely get 1 for my build
I was going to ask the same thing... been looking everywhere for one!
What kind of transmission is that? Is that original gu patrols transmissions?
Have you shared who’s doing the tune yet?
thats an awesome little gadget for the battery i think im gonna get one for my gu haha but i would like to know u have twin stainos but a pod filter off ya turbo whats the go there why wouldnt u connect one of ya snorkles to ya turbo???
Hey mate! I have a 4” maf intake that needs to be tuned to suit the motor , will be connected after tune!
@@RoamLyfe oh ok haha i was gonna say didn’t make much sense hahah looks like a sexy beast but
Link to the product mate? cheers
Hi mate the Nissan is looking great brother.
Thanks mate!!
No problem mate.
Can I get some free merchandise please.
@@RoamLyfe where is the link for this bruz ? A few of us are wondering 🤔
Nioceee!
"yOuR BoNnEt ScOoP, iSnT cEnTrE"
Hey bud , I’m Trying to get in touch with DCA but not having any luck with their sales email , would you have a direct contact for them? As I have a GU PATROL and a 4JJ1 waiting to go in but needing the kit to get it happening 👍 cheers
you need to come to new zealand
Look at this 79 series😂😂😂
What's radiator are you running in the 4jj1 patrol
It's a tb45
@@YourAussieMate thanks mate
What’s the point in 2 snorkels when your just sucking air in through the turbo with a pod filter?
I have a 4” intake pipe that can’t be installed till it’s tuned as it needs to be scaled with the tube
So it’s going to go from snorkel to turbo to that clear filter box then to intake?
You’ve done an awesome job on ur vehicle. Makes me laugh how u young blokes are always so concerned on how cool or “mint” ur car looks. Shame there weren’t more frothing comments to go with some 🤙🤙. All that shit on other channels becomes very dull for me
Neko if you don’t understand how a snorkel works don’t worry why there is 2 snorkels 😊
make a plan before u start laying cables ! then tape and loom and conduit ! 🤙🛻📹😎
Obviously it’s not a race car but would be funny to find out the quarter mile time 😂😂
top radiator mounts?
Currently being cut at a laser joint!
@@RoamLyfe beautiful was wondering what the go was 👍
Should have gone with m57...
I'll go rhythm
Good looking build mate 👍🏻 but I think that diesels sound terrible unless it’s a v8. Love the channel though.
Give us a guess to what power she will make
Lol 390hp 😂 and haven't dynoed it yet 🤔🤔