Compact current clamps + digital multimeter WinAPEX 268B. We check the leakage current.

The multimeter with Aliexpress WinAPEX 268B combines a DC current clamp, an AC current clamp and a digital multimeter. The sensitivity of the device allows you to check the leakage current. It is an instrument for measuring electrical parameters such as current measurement, voltage measurement, resistance measurement, temperature measurement, frequency measurement and duty cycle. This measuring device also has other functions (checking diodes and LEDs, continuity of circuits, phase determination, non-contact determination of AC voltage. From the video you will learn how to use a multimeter.
goo.su/MiniKlE - WinAPEX 268B multimeter from the manufacturer.
The following devices were filmed in the crowd:
bit.ly/GD166E - Clamp multimeter GB166B
bit.ly/IstPitE - Laboratory power supply
goo.su/TokKlE - 266 current clamps
goo.su/GenSignE - Signal generator
bit.ly/ElSanKan - Subscribe but my ZEN channel
bit.ly/Pomkan - Support the channel financially
sam-elektrik.ru/kurs/ course "Your Own Electrician"
• Токовые клещи + цифров... - Clamp-clamp multimeter GB166B Review.
• Лабораторный блок пита... - Laboratory power supply.
• Цифровой МУЛЬТИМЕТР-РУ... - Pen multimeter.
• Достойный цифровой мул... - Brutal GVDA multimeter.
00:00 - Current clamps + WinAPEX 268B multimeter. Short review.
01:24 - Packaging and completeness of the GD166B multimeter.
02:04 - Probes for a multimeter. Thermocouple. Charging cord.
02:38 - Device components. Charging connector. Side button. Speaker. Flashlight.
02:14 - Multimeter battery.
03:16 - Device components. Trigger for ticks. Connectors. Display. Control buttons.
03:35 - Multimeter dimensions. Comparison with other multimeters.
04:04 - Turning on the device. Enumeration of measured parameters. Basic screen.
04:25 - Measurement of direct and alternating current. General provisions.
05:14 - Measuring DC current from a laboratory power supply.
05:46 - Measuring leakage current at constant current.
06:15 - Experiment with artificially created leakage current.
06:46 - Direct current measurement ranges.
07:25 - How to flip the multimeter display?
07:34 - AC current measurement mode.
08:14 - How to measure leakage current in a single-phase circuit?
08:42 - How to measure leakage current in a three-phase circuit?
08:55 - Measuring current imbalance in a symmetrical three-phase load.
09:08 - Measurement of alternating current in the panel.
09:24 - Measuring leakage current in a panel for a single-phase circuit.
09:57 - DC voltage measurement mode.
10:16 - Measuring DC voltage on batteries.
10:47 - DC voltage measurement range.
11:09 - AC voltage measurement mode.
11:51 - Measuring AC voltage in an outlet.
12:00 - Resistance measurement mode. Measuring the resistance of resistors.
13:05 - “Chain continuity test” mode with a multimeter.
13:33 - "Checking diodes" mode. Checking the LED with a multimeter.
14:18 - “Capacity measurement” mode. Measuring the capacitance of a ceramic capacitor.
15:00 - Measuring the capacitance of an electrolytic capacitor.
15:18 - Frequency measurements mode. We check the device with an external generator.
15:47 - Measuring the frequency of alternating voltage in an outlet.
16:10 - Temperature measurement mode. Internal sensor and thermocouple.
17:19 - Turning the flashlight on and off.
17:46 - HOLD mode. Freezing the device readings.
18:09 - Adjusting screen brightness.
18:30 - NCV mode. Non-contact detection of AC voltage.
18:30 - What is NCV mode used for?
19:30 - LIVE mode. Determining the location of the phase in the socket.
19:59 - “Automatic multimeter shutdown” function.
20:14 - General impression of the device.
20:43 - Support the video about the multimeter with a like and repost.
Electrical, construction and repairs with your own hands - a channel for those who make repairs in their private house or apartment with their own hands. You will learn how to build a house and garage with your own hands. You will learn how to do heating, plumbing, and electrical wiring yourself. How to do this efficiently, quickly and inexpensively. The head of the channel is electrical engineer Igor Ekimov, author of 4 books, videos and articles on electrical engineering, construction and repair.
Subscribe to our channel goo.gl/a6YJdO
Channel Electronics for Beginners bit.ly/KANARD
Subscribe to this channel goo.gl/a6YJdO
I will help you promote your channel bit.ly/prodvizh
My books book24.ru/r/TvgMj
My social network account vk.com/iekimov
My email is msnbel@ya.ru
The best videos "Do it yourself house" bit.ly/dom_sv_ruk
The best videos "Do it yourself electrics" bit.ly/el_sv_ruk
The best videos "Do it yourself plumbing" bit.ly/sant_sv_ruk
Best videos "Do-it-yourself repair" bit.ly/RemSvRukPl
Video "Profession electrician, builder" bit.ly/prof_el
#measurements #electrics #multimeter #currentclamps #aliexpress