Building a Blower (DIY dust collector part 2)
2022 ж. 18 Шіл.
471 492 Рет қаралды
Thank you for watching!
Part 1, Building the Cyclone:
• Building a Cyclone (DI...
Part 3, Finishing the Dust Collector:
• Building a cyclone dus...
Thanks to Bill Pentz. His website provides useful info about dust collection:
billpentz.com/woodworking/cycl...
I was also inspired by Marius Hornberger to do this build. Here are Playlists to his fantastic dust collector builds:
• Building a Small Dust ...
• Building a Big Dust Co...
Patreon:
/ jerschmidt
Hi this is Bill Pentz. Most of your cyclone and blower are evolved from my designs that I have been refining since 1994. You have done a pretty good job, but there are a few things that you need to consider for safety and ability of people with lesser metal and woodworking skills to be able to build your units. 1) the 1/4" plate is heavy but is the right stuff to use for your impeller base. 1/8" plate will warp all over unless you have a very fine welder and good heat sink. 2) Your noise levels at over 100 dB were not unexpected but can be greatly reduced with a few minor changes. a) You really do need to be using backward inclined blades. If you divide your blower into six equal pie shaped wedges, then you should offset your blades 2.5" from those division lines to create backward inclined blades. Backward inclined and your already backward curved blades make a huge difference in blower noise. b) You also need to sharpen your blower gore point instead of a gradual curved bend and add a second matching gore point on the inside outer portion of your blower to create a noise canceling effect. Sharpening gives you better performance and a level of noise that can be canceled. c) Also, I chose to weld on both sides of my impeller blades. If you just weld on one side, it should be the blade backs to reduce turbulence to also help with noise. 3) Your cyclone and mine are identical except I continue the cylinder up instead of just closing off with the air ramp. Many are poorly copying my design both ways now. The advantage of coming up is you save having to add a duct piece on the front of your blower and can just make a 9" diameter hole. You need that same sized duct coming out of your cyclone if you want optimum separation and airflow for an 18" diameter cyclone. 4) I found bolting the motor directly to the Baltic Birch plywood and using Loc-tite holds up for a while, but eventually vibrations cause the Baltic Birch to fail. I shifted over to using a steel motor mounting plate that I hold in place similar to how you hold your blower intake duct. 5) I found having my blower base and blades laser cut costs little and greatly minimized balancing. Also, I made my base have a tight fit to the compression bushing arbor which reduced runout and made for a smoother less wobbly impeller. 6) I also tried mounting the metal blower sides to the Baltic Birch. Turns out they will eventually develop openings from being banged hard by debris when you forget to empty your collection bin. A better technique is to make the blower larger in diameter, securing with carriage bolts outside of the metal which rests in 1/8" deep grooves in the Baltic Birch. 7) You can buy ducting flanges in the diameter you want that have a flared base and foam insulation making it far easier to install than the complex hole. 8) Many will want to make their cyclone and blower parts from galvanized steel. Galvanized reacts with silicone to break down and lose its seal. You might instead want to use a good gutter sealant. 9) you can take your identical sized blower vanes and move them out on the same sized base to create a larger overhang and 16" total diameter impeller. I found with these 4" tall blades, that is the ideal size to use your motor full capacity without risking burnout from moving too much air. 10) Please don't ever turn on a newly made impeller that is not encaged in a blower housing. One of my buddies started making impellers for me and he had bad welds. A blade broke loose and destroyed the blower housing plus the whole rest of the impeller before I could kill power! Bill Pentz billpentz.com/woodworking/cyclone/blower.php
@BillPentz What exactly do you mean by: 'a second matching gore point on the inside outer portion of your blower' ?
😊😊😊😊😊😊😊😊
I know your struggles on the back side, it’s something I go through. glad to see you making progress and getting another build up. Take your time we will wait .
20 years ago, a chiropractor got me through an L5-S1 disc prolapse. He said I was so close to emergency surgery that he expected to be calling ambulance when I arrived. It was never needed. Results were was so impressive that I did the training. That all said, sacro-iliac joint pain is often diagnosed as disc or sciatic. Chiro is very good with SI joints. Getting them balanced takes load off the discs and facets. Win win.
@@davidelliott5843Man I wish I had a Dr like that willing to operate with just one ruptured disc. I just had my second surgery to take care of the second disc replacement and L3-5 fused to the already fused L1-2. In addition they removed a 10 mm cist from my spinal cord only to find an SI joint tear. Unfortunately no form of therapy or rehab had any effect so it required fusion as well. It's a miserable thing to go through and I wouldn't wish it on my worst enemy.
I love the aesthetics, Jer! Great to see you back creating, and sharing it with us. Hope you're keeping well.
GLAD TO SEE YOU BACK TO BUILDING THINGS. I'V ALWAYS ENJOYED SEEING WHAT YOU COME UP WITH NEXT. KEEP IT UP.
Your skill level and attention to detail is phenomenal. I’m looking forward to seeing the fun part when you put it all together.
I’ve missed you on KZhead. It’s great to see you back. I hope to see more of your work as time goes by. Thanks for some interesting, educational videos.
Jer, incredible engineering as always. I love you narrating the details. Explanations. Fantastic.
Each little section is a project of perfection in itself - and then you put them all together into a serious tool! Very impressive work!
Just gorgeous fabrication. Loving the efficient use of materials and accessible tools. So good to see you back in action.
Very inspired by your attention to detail and the amount of care you put into your projects!
Always amazed at the carefulness and attention to detail you put in a project. Awesome video once again!
Awesome to see you back Jer, and also awesome to see some build videos being successful on KZhead. The algorithm really beats them down these days. Keep up the awesome work, you're quickly turning into the next Matthias.
Glad to see you 'back on the horse' and working on projects again. All the best from Australia, looking forward to the rest of this project.
I love the the squiggly seal, efficient and good looking!
Another build that is outstandingly detailed, well thought out, and an excellent example of fine craftsmanship! Great job, Jeremy!
So beautifully designed and executed. that thing’s a piece of art
I’ll say it again. Totally amazed with your problem solving/solutions to your build process. Truly impressive!
I said it once and I say it again: Continue like this and one day you'll score a job at NASA, building spacecrafts. Absolutely brilliant work.
NASA has you grind off any mill scale when welding...
@@jeffallen3382 i doubt they grind it off by hand. Or do you weld for nasa?
@@bushratbeachbum it doesn't matter what they use... They don't weld over mill scale! My old buddy use to weld for NASA. Also doesn't matter who you weld for. You weld over mill scale and you will fail any kind of certification testing. Doesn't matter if you're a pipe welder or work for NASA.
@@jeffallen3382 Jer is young. He will improve over time. No master was born as such. 5% talent and 95% continues training.
@@caigner LOL
Nice job Jeremy glad your back in the shop again.
I love your material usage measures. I really need to start thinking like that. The “wiggly bits” make it look really cool. Definitely was worth it.
Jer - Its good to see you making videos again. I hope all is well in your world and, as always, your work is perfection!
So nice to see someone with natural feeling for geometry at work. Making smart use of stuff available.
Nice work, as usual. I think it's cool you're using only clear finishes for both the wood and the steel.
I really love that you are back posting more regularly, I have been watching for years and still drop everything when I see a new video from you! Thanks you for making such great videos
Love it. The way you made that cover, making the little wavy bits individually and then gluing them to the disc, was class. Great build, really enjoyed it.
Love your video style, length, level of detail. I'm so pleased you're back posting, even if it's less frequently
Can‘t wait to see the last video … it‘s always a joy to see you working … I like the way you find solutions for the process and the result is outstanding. Thx for sharing
i really enjoyed watching your thinking process during this project. You're a wonderfully talented and kind man. Thank you!
I'm always amazed at how smart you are and how interesting you're able to make your videos. Thanks,
Nicely done, Jer. Glad you're back!
Dude, thanks for showing us your process. Have a nice day.
This is such a clean build. Very well done. 👏 I love the look of the wiggly sections. Form from function at its finest!
I like your thinking on the wiggly bits, and love when what looks like decoration is actually functional industrial design.
Glad to see you back. 👍. Your videos always provide inspiration and demonstrate problem solving I can apply on other projects even if I'm not building the same things. Thanks for all you do
Normal household Silicone sealer is a bit too soft to stand up to basically being "Sandblasted" for very long but, on the flip side I am sure the same joints would eventually get packed with saw dust anyway so it only has to last long enough for that to happen. For future (re)builds I would recommend some good quality automotive seam sealer like "SEM 29372 Gray Seam Sealer". The nice bonus part about the SEM tubes is that the nozzles screw on, which makes unclogging them or even replacing them entirely so much easier. The downside to SEM sealant is that its too good at being impermeable so it takes some specialized paint to get it to stick to it.
So glad to see you back - great build as always.
This is the most impressive and best built dust collector blower what I have ever seen in youtube. This must pull A LOT of air. I can't wait to see more progress of this system 👌
Excellent progress. I’m so looking forward to the next instalment.
I'm only 7 min in, but I love your ingenious use of jigs and geometry, and how you made and bent the vanes. Brilliant!
Amazing build quality! So glad to have you back making content.
I really appreciate all the jigs and fixtures you use. Very clever.
Great work Jer. Nice to see you and your videos. You are a brilliant person.
Im working on building my own dust collector, this is exactly what I need! Thank you!
Fantastic build Jeremy! Your attention to detail and execution is amazing! Looking forward to Part 3 of this build. Be well..... 👍👍
Good to see you back. This is a great build. Be well Clint
A nice little project but sometimes what I find most interesting is the simple and effective way you develop fabrication methods to accomplish the build, Bravo.
Awesome work. As far as butt welding sheet metal - you want to stack tacks. Tack every 2", then come back and put a tack on each tack. That will move your heat around and minimize distortion. Also prevents blowing holes in the the metal. Other than that, awesome work buddy. Leagues ahead of me.
Ron Covell just posted a video the other day butt welding strips of metal (copper) and finishing them to the point that the welds all but disappear.
Nice to see you Back Jer. Keep the Videos coming and ill keep watching.. you are Fascinating sir!!
Great work Jer, its coming right along. Thanks for sharing.
As usual magnificent engineering and execution
You're on another level, that's for sure. Kudos from Brazil.
Thank you. Your efforts are a pleasure to watch
Yes, the fine kreg screws are excellent for Not splitting. Great work Jer, as usual. Please send rain !!
Hi Jeremy, so good to see you back, awesome to see those skills of yours again 🙂
Glad to see you posting videos again. Welcome back
“We don’t know what 3phase is in the US” gave me a good chuckle. Good seeing you on camera again.
Thanks for another great video! I remain impressed with your problem solving skills and your thrift is most definitely appreciated. Keep up the excellence!
Amazing as usual Jer absolutely great work loving your new workshop
You are an absolute genius!!!! Love your content! Glad you are back
You are one of the best builders on KZhead IMO....i love when you post videos
Pure genius. Thanks for letting us into your mind.
Your design, work ethic and attention to detail is inspiring to many. The explanation of each process is exceptional. Your helping so many people to get in the shop and design/make/create. Keep up the awesome work.
Good to see you back with another amazing build.
Can't wait to see the whole thing assembled.
Good to see you back
Glad to see you're still making videos! You're one of my favorite creators. Keep it up!
I am in my 50's and I have been fabricating things since the late 1970's ... your skills and methods are impressive!!
Just awesome so far. Can’t wait for the final outcome! Nice work!
Love it. Always enjoy your work. Can't wait to see the rest of the build.
I like all of your little jigs and the different techniques you use to make them. Oh and the blower is awesome.
Great work Jeremy, very impressed.
Fantastic build dude. A really professional look about it. I am so glad to see you back on here mate it was so long since you made a video prior to these. Great video buddy 😉👍🏻👍🏻
I always enjoy watching you work. Interesting, informative, and impressive. Thanks!
That blower sounds amazing!
Excellent video. You've leveled up since coming back!
Awesome work young man! Cheers, William
Amazing work Jeremy. Screw what other people think about how you do things.
Amazing attention to detail. Superb job
Never cease to be impressed by your sound thought process. Amazing engineering and inventor mix. I’d be curious by a financial breakdown of your final assembly.
A work of art, Jer, very good looking
Nice job, Jeremy!
I've always loved your narration of reasoning through it. Well done!
@Jer Schmidt ? Is the above message also you?
@Jer Schmidt if you're not on telegram then someone is impersonating you and telling people they won to drive them to telegram. Same exact pic and name but on telegram. There was a post above, bow deleted that seemed counterfeit. I have a screenshot if you need it.
A neat and lovely build! Thanks for sharing.
Impressive jig wizardry, looks like you've built something very high quality.
Very well thought out design. I like you use a fixtures templates and jigs when mounting of the parellers and other parts together. It truly makes it repeatable. Looking forward to the next video.
Nice job, Love your work I'm glad you are back,
So glad you're back, man! I really enjoy your videos!
Excellent job Jeremy!!!
Sei tra i migliori di sempre! Un grandissimo abbraccio !!!
Has to be one of the best builds I've ever seen, well done!
Superbe réalisation! And so glad to see you back!,
glad your back been missing ya
Always good to see you post
Dang, nice belt grinder. Well done Jer, as always.
This is going to be one hell of a system! Looking forward to the next video.
Great to see more videos in my feed. Glad your doing well. A tip, when butwelding sheet metal, when you can. Support the back with copper. No melt through, traps the gas, and weld won't stick.
My first job in Brazil was to make these snail exhaust fans and air recirculators for gas ovens for curing powder paint.
Wow, that Leeson motor is a beast.
Mad kills young man. Incredible work and videography.
Awesome as always! Really enjoy watching you work, always lots of clever ideas and genius jigs. Looking forward to the next, but take your time. We'll be here! Thanks for sharing!