Woodturning - Orange is The New Blue!
Been working on this one for a while now, probably over a 100 hours have gone into making this with all the trial and error.
Made from Applewood, finished in Danish Oil. The Amp is 2 x 50w, features Bluetooth, Wi-Fi, LAN and USB inputs and can be used as a WiFi hotspot. Its my intention to use this type of amp in most of the future speaker builds. Each speaker houses a Dayton Audio DMA Driver matched with a Passive Radiator.
Need to do some more testing to ensure the Amp is fully programmed as it should be for the best overall sound, so this will hopefully be on my website in a couple of weeks once that's done.
My website - www.mjturning.com
New channel for shorter projects - / @6minuteturnings
My other channel Where I post other stuff I'm up to - / @mattjordan-everything...
You seem to have Netflix on your mind!😂 YOU. ARE. ABSOLUTELY. INCREDIBLE. 👏👏👏👏👏👏👏👏 I will become a customer soon enough. You are too talented to keep being watched, and not invested in to what you do. Wood and wires, man, I bet a camping trip with you is off the chain! 🤣 I am so grateful to enjoy the viewing of your gifts on display. 🙏
Thanks 👍
Wonderful, far out, what can I say, absolutely incredible! Did I mention the amazing colours? Wow!
Great and very professional work. compliment to you👍 Tolle und sehr Professionelle Arbeit. Kompliment an Sie👍
Чудовий майстер! Приголомшивий і неочікуваний результат!
As a member of auboun society.thank you human for the relaxing rest after long flight...chirp chirp tweet tweet !!!
Another amazing project, Matt. Once again you had me guessing until almost the end. Your mad metalworking skills were also on display along with your mad woodworking skills. The title should be Orange is The New Blues! Lol Bill
Cheers Bill, could of played some BB King at the end too 😆
Thank you Matt! Like William Ellis, my mind tries to put it all together like a puzzle as you're working. Not so much this time!☺️ This was fun to watch! I like the orange with the wood tone too. Imaginative and beautifully done!👍 Blessings! 💜
Thanks Trish
Amazing, Matt! That's a work of art! 😃 Really well done!!! Stay safe there with your family! 🖖😊
Thanks 👍
I really love watching your videos, I used to want them more often, but then I realised that when you drop them, they are a true gift. These speakers are dope.
Thanks
Crazy good. I am watching without sound, so I never know what you are doing until the end. Nice.
Thank you! Cheers!
You sure.... Well you sir are an amazing woodworker. Bravo bravo. Great job
Thank you very much!
i had absolutely no idea what these where until the very end and i couldnt have guessed if i had a million guesses lmao. they look great
Jiwa seni anda sangat luar biasa matt... Di tunjang dngn alat yg komplit... Lngkap sudah
Beautiful Matt 🙌 Everyone needs these!!
Thanks Gina
great work. with all the metal work, I thought i was watching the "my mechanics" channel for a bit
Love the little brass sound directors.
I simply lover your work. I really love all the speaker boxes you make. If I'm ever in a better position with money I would love to get a set from you one day if possible that is. Keep it up.
Thanks
Cool beyond belief. So wood-turning and electronics. The vision and the craftsmanship to follow it through. Whoa!
Gorgeous bit of kit
Interesting 🤔❗️I never saw that coming, this is wonderful!
Thanks
Not your typical woodturning video I love it! I was wondering where you were going when I saw the brass and you had me till the end!
I am very impressed with your metal turning skills for that finial. My mouth was legitimately hanging open (no hyperbole) 5:53
Hi Matt the wood is lovely as it has great grain and markings and colour, I like the orange resin it really goes nice with the wood. The speakers and box for playing music on are brilliant well done you really are clever and talented. Amanda xx
Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself 🇨🇦
When it comes to your ideas, I am never less than amazed! Another masterpiece.
Incredible work as always. Real nice touch with the carbon fiber.
Thanks Mike
You are very skilled!
Had to share this with my brother (as I do with most of your other videos, I am sure he is well inundated by now!)... But this one had particular poignancy as he and I we fashion and assemble speaker boxes when we were wee lads using slabs of Styrofoam to mount 3-way speakers on either side of our beds providing beautiful stereophonic sound from a tape deck that only provided a mono output... At least we had left and right speakers even though they were coming from the same signal. Needless to say ours we're quite modest in comparison to what you presented here. Perhaps one day I can follow your example and present him with something special. I sincerely hope you will enjoy the sounds that this assembly and creation will provide! Thank you again for sharing it with us and thank you again most heartedly for the inspiration and the idea! I really enjoy torturing myself watching the videos you offer. THANK YOU! AGAIN...
Thanks 😁
Pure Sound Art😄
It is mesmerizing to see wood transformed into art. Better yet art that is functioning. Well done, thank you for this.
SPETTACOLARE... come sempre👏👏👏👏👏👌👍
You always amaze me with your work. Love watching it become a masterpeice
That is a dope stereo system
Fantastic percission
Wow, that is amazing.
This was amazing to watch. Well done sir!
What an awesome design! The whole set-up turned out great 👍 ❤
Wow! Electronic knowledge and artistic woodworking.
Beautiful workmanship
Nice! Now put a 20W 40m SSB transceiver in a log. ;-) Parks on the Air here we come
This is beyond awesome!!! ❤️❤️❤️👍🏻👍🏻👍🏻
...phenomenal work!!!...love it!!!...👍 Matt
This is awesome 😎
very beautiful
Master craftsman at work 😀 Incredible stuff 👍🏻👏🏻😀
Комментарий в поддержку канала и ролика, а также труда мастера
My jaw dropped for real. This is insane!! I want it!!
Hi Matt. Your talent knows no bounds, yet another awesome video. 👌🙂
wtf you are a genious fren!!!! wtf!!! so cool thanks for sharing
Amazing work Matt. What an awesome desgin. 👍👍
Great work and you are a wonderful artist
Vah bhai kya speaker banaya wow
Very beautiful. Very sceptical about the sound quality.
Thanks, why would you be sceptical about the sound quality? Good driver manufacturer, good amp and all calculations done for volumes etc.
@@MattJordanWoodturning The acoustic parameters are an unknown, 360 degree sources will cause much more planar interferences that regular conical emittors, and adding the by-design upper bounce to boot will introduce a high degree of nonlinearities to the system.
@@mikelabyrinth the acoustic parameters are known just as much for this as any other system. As for being omnidirectional, this has been done for decades, there are pro and cons for all systems. But to doubt the sound quality would be extremely nieve. Interesting thing is when people talk about sound or quality issues they have to refer to testing carried out to pick up a perceived issue, due to the fact there own ears can actually hear it.
Круто! Ура, товарищи! И всё это делает человек!
Just a man, his wood and his tools 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
Amazing! 😍
Thank you! Cheers!
well done!
Absolutely gorgeous set of speakers!
Glad you like them!
Just mindblown!
It's amazing 👍👍
Как всегда потрясающая работа👍
Nice work
Thanks
Outstanding!
My wife said: a different thing. I said: beautiful!!!
That sweet man
Neat speaker system Matt.
Awesome wish I had the tools to build something similar wish I could hear yours too hopefully it sounds as good as it looks
Amazing
Круто! Отличная идея
@4:55 mmm, wood toast!
Коллега браво, приятно смотреть на работу проффесионала
👍
That's impressive.Just missing an LED on the speaker brass tip - bravo! -
Don you are craftsman
So creative
Top 👏👏👏👏
Великолепно 👍❕❕❕
Unique !!
Some men toast their sandwiches, others, their Applewood.
Just wow
That’s beautiful, I just wish that the top 3 screws were flush.
Awsome!
Wow!
Absolutely beautiful. Although does it really make sense to have that upfiring? That looks perfect to be flipped over and down firing if you put a properly weighted woofer in there then put the tweeter and or full range woofer upfiring on the new top which is its current bottom. Since they are facing away from each other they would do well and look just as good and you would get the dimensions of deep percussion on you beautiful wood cover plus dimensional upward firing drivers. Oh wait you do have a passive radiator on he bottom not bad. Although the bass does better on its own deep flat wood bass like you said and the highs does better having a clear but slightly angled shot to your ceiling.
Very precise work. Always looks great.
Like 👍👍👍
Nice
Thanks
DANG !
❤
👌🏻👌🏻👌🏻
That's an absolutely beautiful project! I'll tuck this away for future inspiration for sure. How is the sound quality? Those look like tiny little drivers and KZhead can't really convey the sound well.
Sound quality is good, I normally try to match and set the amp up so it can handle most must types of music at max volume with distortion or clipping
💯👍Awesome! It's so creative. You are indeed skillful master. Thank you for your clipe, Mr Matt . P.S. How much do you appreciate this your thing?:))
Ding fries are done, ding fries are done. Eat them up yum ! 🤣😂 Wood in the toaster oven , brilliant. What drivers did you use? This turned out really good. I love doing audio stuff.
Thanks, driver info in description
Amazing, mate. Seriously amazing. One can tell how much work was put into this, i hope you get a great price. Btw, what's the kewl music at the end?
Thanks, if you go to the description the music is listed by KZhead
Oh great, added to my library. Wonderful how it all turned out in the end. I both got to watch a master at work and i found new music
1st Comment From India
🙂👏🏻🙂👏🏻🙂👏🏻🙂👏🏻🙂👏🏻🙂👏🏻🙂👏🏻🙂👏🏻🙂
Thanks Norma
Absolutely stunning, the resin and the brass compliment the wood so beautifully! Where do you get your speaker kits?
Dayton audio drivers are available in lots of places online 👍
@@MattJordanWoodturning cool thanks Matt!
I saw an item very similar to this "on sale" in Walmart for $4.99, or (3) for $9.99 (plus tax).
Very nice. May I ask if that raised metal？ is for better acoustics?
Thanks, the shape is for acoustics but using brass was aesthetic only, i could of just used wood.
Bluetooth device, is connected successfully.
Amazing work Matt! I'm a newbie to epoxy. The Total Boat Fathom I bought says you can pour up to 3" deep. Your castings look deeper than that. How do you do it? Long curing time? Thank you for the work you put into these videos!
Thanks, the total depth you can pour is only on the thickness, not the length. So for a river table how deep is the thickness of the table, the a actual thickness of this was about a maximum of 3/4". And the length is what you thought was the thickness. Hope that makes sense
@@MattJordanWoodturning Thank you for the reply!