DIY Metal Lathe Machine Without Using a Lathe Machine
Support me on Patreon: www.patreon.com/sekaustria?fa... Project no.78 diy homemade mini metal lathe machine (torno)
The lathe machine is good for facing bronze aluminum and alloy steel, when it comes to Mild steel its a different story i tested it and you see in the video it also can work with mild steel but it make some vibrations in the head and some weird noise that im sure its not normal.
Upgrades that needs to be done to the lathe machine:
use another high quality Pillow block bearing, Adding a Drill press pulley System and Changing atleast 1/2 or 3/4hp motor.
I hope You Enjoy Watching My Video
Building a Metal Lathe Without Using a Lathe LOL :D
LINKS THAT HAS BEEN USED IN THE VIDEO:
SBR20-1200mm linear rail and SBR20UU Blocks: sea.banggood.com/custlink/Dv3...
SBR16 1000mm Linear Rail and SBR16UU Bearing Blocks: sea.banggood.com/custlink/mv3...
Slide Bearing Block: sea.banggood.com/custlink/33G...
Slide Bearing Block: sea.banggood.com/custlink/3mK...
Drillpro Turning Tool Post Holder: sea.banggood.com/custlink/v3m...
SANOU K12-100 Lathe Chuck: sea.banggood.com/custlink/vDv...
7pcs 12mm Shank CNC Lathe Turning Tool Holder Set: sea.banggood.com/custlink/KKv...
Pillow Block Bearing: sea.banggood.com/custlink/vGv...
YOU CAN SUPPORT THIS CHANNEL BY BUYING THIS ITEMS.
Linear Motion Promotion: bit.ly/2QRLihR (15% OFF coupon code: LM15)
buy more save more: bit.ly/2rW8qgr
Drillpro Angle Grinder Belt: bit.ly/2GQpqPw
2032mm x 13mm Saw Blade: bit.ly/2QRKYQb
Drillpro 3pcs Step Drill Bit Set: bit.ly/2D7LAsx
Handheld Copper Pipe Tube Expander: bit.ly/2rWa6pW
Raitool Linear Actuator Motor: goo.gl/CY4byb
Raitool™ 90 Degree Corner Tool: goo.gl/jFgEwd
Ratchet Wrench: goo.gl/ckJ1xu
20Pcs Diamond Coated Core Drill Bit Set: goo.gl/mPZ4B6
Opening Locator: goo.gl/sQmMce
LIKE MY FACEBOOK PAGE / pinoydiybuilds
SUBSCRIBE TO MY CHANNEL / sekaustria
AND SUPPORT ME ON PATREON / sekaustria
Like Share Subscribe for a Weekly Videos #Diy-Projects #Homemade-Projects #DoITyourSELF-Videos #DIY-Channel
Nice to see a young man using practical skills i learnt in my first ever job and have never forgotten. despite it ending 20 years ago after 13 years in the trade.
Hello guys this is my Longest video ever :D i hope you are doing well :) have a great day :)
Pashare nman ng dimensions/plan bro, kung pwede.
Gagawin ko muna nyan bro medjo matatagalan lang magpapahinga muna ako.
Hello friend it's measurements details can expect
Ill make it soon bro. I need aome rest first
👍👍👍
You just built a machining lathe (that at least gets the job done) from 90% scrap! That is incredible! Bravo!
The easiest to build. Grade 1000. A mais fácil de ser construída. Nota 1000
In case you don't know it, for the chuck you can get rid of those three expensive bearings, and use a tube with two bearings on each side, back to back, of the type used in car/trucks wheel hubs. These are tapered roller bearings, and are basically to conical matching parts (each). These will be able to handle more axial load than your lathe can put out, and even if from the scrap yard and used, will get you more precision and repeatability than those three altogether.
Good idea, and when you say "tube" did you have in mind something like 10 to 15 Centimeters (4 to 6 inch) diameter steel tube or pipe to house the bearings?
Nice bro thank you so much for the info.
It's easy to criticize after someone else builds something
@@morrislucero810 this is more a teaching moment than a criticism.
@@YT-User1013 sharing of ideas. 2nd mother of all inventions.
I am enjoying this!! Says someone with 6 lathes and 2 mills. BUT my first lathe was a school project which led to a Degree in 3 D Design. A life teaching 3 D Design... And now making model Steam Locomotives. Yes I still use the home made Lathe with slipping belt clutch. Lots of love David and Lily.
Excellent, I'm coming over for some lessons.
But why did you not have the heart to tell him what he did wrong? Did you maybe figure that he learned what he did wrong in the process? It's great that he accomplished this but I don't know for sure that he does know the important differences between this and one that wouldn't require hammering a bearing on as we saw. Looks like that bearing didn't turn so well either after he did that. What would you say ...+/- .002" repeatability & accuracy? I haven't made my own but I have rebuilt a little Smithy (Midas) 1220-xl except for the gearbox. Fortunately, the gearbox was sealed and hadn't been contaminated with sand rust like everything else. I'm just glad I went to school, watched 1000+ hours of videos and read up extensively, on the subjects I needed to know to make the thing chooch. The one thing I didn't realize though, was that the main reason my teachers were telling me not to get a mill/lathe combo was because they are horribly inefficient when you need to go from milling to turning or vice versa. The two just interfere with each other to much so If I gotta turn anything larger than 2.5" dia. the vice either has to come off or I have to position the vice far to one side so I have to take the work out of the vice & turn it around to mill the other side, just as one example. Maybe he could make some modification to get some preloading. ...?
This is the determination and dedication that gave us our tools of technological success... great job!
Excellent project. I applaud your effort and the end result. If you find you have rigidity issues, you may wish to consider a larger diameter main spindle shaft and possibly tapered bearings to eliminate end play. Also, maybe I missed it, take the chuck off that backing plate and face the plate so you know its true to the shaft, then re-assemble the chuck to it.. Welding has a way of making things move a bit. Thumbs up from me.
just here to upvote facing the backplate, no reason why you shouldn't eliminate as much cause of error as you can, this will help you hold a better tolerance and make your parts run a bit more true. Facing the back plate and getting some tapered roller bearings the chuck would go a long way, this DIY late should make some great parts after some upgrades.
Very clever use of already fabricated parts! The ways and carriage are super hard to make, but your method simplifies the whole process, and could certainly be scaled up!
For a light duty* DIY home workshop lathe, using linear rails is a reasonably workable idea. The 20mm ones he's got are pretty strong, and have a useful amount of mass to them to help prevent tool chatter. Where they fall down though is there's hardly any designs of bearing blocks that have a way to adjust for wear on them. Once there's play in them you can't just tighten up gib screws or resurface the ways. I suppose if you're careful about the bolt hole positioning when building it you could turn the rails around and use the less worn ends to get a bit more life out of them, But you'll probabbly still need to buy new bearing blocks. (*By "Light duty" I mean one that's not used 24/7. If well thought out and constructed I'd think a DIY lathe made using linear rails would probably handle more strain and stay accurate longer than one with traditional dove tail ways, It's just that when it DOES show signs of wear there's not a lot you can do to sort it out other than replacing some pretty expensive hardware.)
honestly for an inexpensive DIY lathe this is really good, I had never considered using optical rails or bearing blocks
@@needdamemes2757 There is also issue of chips and metal dust getting into bearing blocks, ruining them real fast if not protected. There should some accessory parts to those blocks witch try prevent this from happening, but its not perfect solution and as mentioned just little wear and those are next to useless, ending up just wrecking havoc to inserts and surface finish. Its same effect that happened with my DIY mill, from cheap drillpress, cheap cross feed table and rather expensive tooling that got ruined every time it bumped. Tried it in "vertical lathe" setup but similar thing happened. Then again his pillow bearing blocks wont be that accurate anyways, so this is well suited for occasional bushing adapter or such work, but any proper machining tolerances you can forget, though this is lots sturdier than cheap chinese lathes on the market, so with little design chances like cup bearing in the axle to center it properly, replacing threaded rod with machine screw with suitable slack removal like two nuts with strong spring between and building some protection for the ways, sure this will be much cheaper and does what it was designed to do.
You know the moment I have a home with a shed to work in, I'm coming back to this video among others. This beast is one item too big to move between the laundry alcove and the outside workbench daily.
Data you can purchase a Mini Lathe for about 500$ and it does everything. But ok go for it
Sa lahat ng nakita kong gumawa ng lathe. Eto lang talaga ang pulido. Gawang pinoy pa.
im proud to be unting unti na nakikilala ang sarili nating gawa
You're such a creative guy Sir Sek, it overwhelms me to see a fellow Filipino who's making great contribution to the community. I do hope one day, I'll be able to achieve such large supporters in my own channel. God bless you.
Home Innoventions piosenki PIOSENKI
Hola, es admirable lo que has logrado con pocas herramientas y con un resultado excelente, felicitaciones desde Uruguay.
No es mucha ciencia esa madre cualquiera lo puede aser solo te tiene que gustar aser prollectos , ve a darle de comer al pinche gallo
@@j.q5723 men yo también soy de uruguay... Déjame decirte que la mayoría no tenemos gallos... :)
I love it! I would suggest using a different motor which allows speed variation. The smaller the diameter of the piece of metal your turning, the more RPM you need. Maybe one of a bigger hand drill would be a good choice, since these motors are usually electronically controlled.
>>>>
The problem is PWM and you will lose torque. Better is to calculate a 'gearbox' with different wheels and put the belt on a different wheel to change the speed.
DIY at its best and in the Philippines. This dude knows what he is doing,........his shop is spotless,... great video. Impressive,........doing more with less
THANK YOU for a most interesting and worthwhile video!! This indeed inspires me to maybe try this, as I cannot justify paying lots of money for an already built lathe, but this looks doable for reasonable cost. Thank you again!!
Well done and thanks for not using background music I prefer to hear the natural sounds like in this video!
I also appreciate the natural sounds....minus that goddamned rooster that i would have shot day one of this build
Fine job by the way.
Now, you have a lathe! Congratulations!!! You can make improvements as you go along.
Nice work. I was a little concerned about the precision of the measurements lining up the guide rods and such, but looks like it came out okay. One thing - get in the habit of *never* leaving the chuck key in the chuck unless your hand is on it, or one day, you *will* eat it when you forget and turn on the motor.
It's even worse when you turn on the motor with your hand on it and in the chuck.
Nice build. Smart use of readily available items to make rails. Thank you for taking the time to share this project.
Nice fabrication! Most people have no idea what it takes to make something like this, thanks.
yo si tengo idea de lo que es trabajo en eso
He's a Pro...
This guy gives hope to DIYer's that can't afford a lot of high end equipment. Thanks for the videos!
my sentiments exactly. I see his tools are sometimes the cheapest ones but he didnt use that as an excuse to stop him from making this machine.
@@ChrisWMF absolutely! Well said Chris👍🏻
Good start. Now I want to see a gearbox, a feed screw, and some kind of measurement markings!
GG, I've been thinking of building my own lathe and this seems like a good guide to follow. Thank you for this.
Fabrication is not a art or hobby or what ever some people look at it , it is a way of living and is inside some people who grow up with it
It is just in some people!!!!!
Thomas D Harrell I meant some who get familiar with it in early age
I love the way you make this with the cheapest tools available!
It's one of the most complicated constructions you've done! Very good!
This is the BEST DIY video I have ever seen in my whole life. Magnificent work.
точностьу станка конечно так себе, но любой парень молодец и заслуживает уважения кто делает хоть что то, а не сидит на диване.
там даже соосности нет шпиндель-салазки...
Парень молодец но не рентабельно ,столько затрат а в итоге качество обработки кустарное ,с такой точностью ,даже лучше можно обработать деталь болгаркой и напильником доработать .Если знаешь способ.Не нужно заморачиваться с такой сложной конструкцией .
Great work just as a point for the future, instead of using a solid roundbar for the head shaft use a 3mm or bigger walled pipe, this will allow you to turn longer projects that run through the pipe, but this would mean you will have to replace those head bearings as well for bigger units and resleaving the main pully. Good luck and I like this build.
The problem is finding such a tube. Show a URL where it can be purchased please along with the correct bearing to also fit. Otherwise it's not helpful at all. It's just criticism not helping
Nice work. I like how you were honest about the couple of flaws you found in the design in your description 👍
Remarkable... May not be the absolute best small lathe a person can have in their workshop BUT it does what it has to and makes so many more projects withing reach without having to go to expensive machine shops to get a part made... AND they are not open at nights or on the weekend 😇
Great video, that drill press and the centre punch have paid for themselves
Um projeto muito inteligente e perfeito. Parabéns.
I find it quite interesting that I do not know this language, yet I understood it perfectly because it's similar to Spanish.
Muy buen trabajo, eres un chingón, precisamente estoy necesitando una herramienta para rebajar una parte de unas tuercas, actualmente las mando rebajar al torno pero me cobran muy caro y había pensado precisamente en hacer uno sencillo como este que acabas de hacer, me gustó mucho, me has completado la idea y confirmado que sí se puede. Muchas gracias por compartir y saludos desde León Guanajuato México.
I love it. It clearly took you quite a few hrs to build. I'm sure it will last year's of hard use with the quality you put into it
Great job of building a lathe! I like people who do the things where others say "it can't be done". And you seem to be a master of it! Thanks for sharing the video!
I'm out of money and want a lathe machine... And bam your video came up.. Thx... Surely I'll make this up one day.... Untill thx...
Thanks and goodluck bro.
If you do, you'd be much better off using taper roller bearings, even if not precision bearings. Maybe even ones off junk car with good wheel bearings. You can see the these bearings runout when he starts a cut. These pillow blocks are not meant for axial load and there's noway to preload them like a taper bearing. I think doing that and moving the toolpost closer to spindle would give you a chance at decent surface finish, it just is not going to happen with those bearings and and that much tool stickout. Good luck
@@SekAustria What was your total cost for this project, How much for the welder the drill press and all the extra metal you used. Please give us the amount of time you spent on the project. Nice job but at what cost
@@Steve_Just_Steve Side load bearing are much better, Tapered Rollers need to be lubed all the time
@@gfdfperte4248 are you talking about a thrust bearing? That would be better than nothing, but I don't know why they have to be lubed more than any other bearing. Besides you need to lube any machine anytime you use it.
Great job. i love how even though the lathe wasn't done you used the machine to improve its own parts. also i admire your hack saw.
он просто молодец, сделать станок своими руками при минимальном наборе инструмента - это стоит уважения, я инженер-механик самолетостроения восхищен вами! Удачи в делах!!!
а можно узнать, какие самолёты ты строишь? чтобы не садиться в них.
10 out of 10 for ingenuity! Need a lathe? Build a lathe! 👍
Wow, this is amazing! Is a great video. Congratulations from Brazil.
Just when you think you saw it all YT shows you a guy building a working metal lathe in his backyard with recycled parts... Great video!
I am from Brazil, my friend you are a true genius, I really want to get a lathe and you just made a perfect one, congratulations you are a real genius!
Love it. Make a few sheet steel housings to stop swarf getting into your bearings, motor etc. A tailstock is really useful, even if it is just to hold a drill chuck.
Good job, buddy! It seems to me that some changes will be necessary in the future, but the machine for now working well :) I was planning on making a similar machine for several months, but you were faster than me: D
Thanks bro. Your always making projects faster than me i always plan to build similar projects of yours but you were always posting it first. You are in the level of make it extreme bro im so proud of you :)
Next step a drill mill
Надеюсь ты сделаешь лучше.
Made in Poland I can’t wait to see yours too man. You do incredible work.
I have a feeling you will do a far better job.
Mi hermano lo felicito, tremendo trabajo, estoy por hacer una máquina de esas, gracias por las ideas, saludos 🤝
सर जी क्या मुझे इस प्रकार के टूल मिल सकता है क्या नहीं तों आप मुझे इसकी जानकारी जरुर भेज देना यें मेरा वाट्सअप नम्बर है 7088035141
Pretty good job. Amazing what people can do if you set your mind to it. Try and take out the minor play for a more accurate cut.
Witam i pozdrawiam!!Wykonanie i zlozenie tokarki wlasnymi rekami to majstersztyk,duza wiedza z dziedziny -budowa maszyn,bedzie sluzyc latami!!Jedyny minus to ze po spawaniu elementow powinno sie je oczyscic i zakonserwowac szpachlowka a potem farba bylby lepszy efekt,dobry pokaz filmu ,tak trzymac!!
I cant believe every bolt fitted its place. My honest respects.
That's really great Man; because you don't have to use other very expensive equipment to fabricate this metal lathe which is very reasonable and economical, that is the best bargain for the hobbyists. I have watched many interesting videos about making a metal lathe, but till now ( April 2024 ) this is far the very best. You do it the simplest way with all the necessary measurement and calibration. Congratulations and thanks a million for this uploading bro. I just liked and subscribed and would ask all those who have watched this video to like and subscribe. Thanks again, and I wish you all the best. Keep it up.
I'm only about 8 minutes into you video and I'm grateful that I found it really enjoyed the video build
In theory if you take the chuck off and reface the mount now that that lathe works, it might make the chuck a little more aligned. Awesome stuff!
1) the chuck shaft should be 1st aligned with the lathe ways by putting a long straight shaft in the 3 bearings and check the alignment with a micrometer held on the carriage (using a magnet holder for ex) and moved along the ways. Alignemnt of the chuchk shaft can be modified using the adjusment screws on the 3 bearings. 2) the chuck backplate should be then turned on the lathe so that the ridge that goes in the chuck is concentric with the chuck shaft, only then should the backplate be drilled.
This machine ain't accurate enough for this anyway lol. I mean, hot rolled steel? Chinese Hardware? Get Real.
Very smart fellow and did any negative posts build one before breakfast today, I didn't think so. Great job mate, Cheers from Iron Rock, nova Scotia, Canada.
FIND A QUIETER LATHE ON KZhead. I can't. This is exactly what I want. Simple. It has a real lathe chuck that can hold a large diameter piece. It does not have the auto feed that requires all those damn gears that make all that damn noise, like a normal mini lathe has.. This is the perfect aparment lathe. QUIET. The only thing you hear is the actual milling. The motor and bears and belt are silent, and that is gold, because silence is golden. This is what I want. I want to add CNC automation to it. 5 stars. Much love. I was already subscribed.
Woow bro best homemade lathe. Nakaka ingit yang lathe mo bro heheheh
Gawa ka ng sayo bro diba meron kang lathe chuck.
Mukhang malaking budget kailangan heheheh
20;00 I was doing this with my EMCO Compact 8 Electronic as I wanted to be able to fit several cheaper chucks and also be able to get my fingers closer to the studs and bolts which are now better spaced like yours! £250 and £370 for chucks for it were excessive!!! I also made a faceplate out of a £10 Boxford backplate. David. Reading England.
Extraordinario tu proyecto amigo! Herramientas sencillas y mucho ingenio! Gracias por compartir.
If we a million like you, a good lathe would be cheap to own. Thumbs up sir.
That's very nice considering what you had to work with. Chucks always have a precision shoulder on the back to align the mandrel with the chuck. You should face the backplate without the chuck and machine the male shoulder on it. The diameter have to be as precise as possible compared to the inner diameter in the back of the chuck so the alignment will be precise too. This should give a good alignment on the jaw of the chuck then you can get a nice reference round bar, put it on the chuck and align the carriages to the rotation axis by putting a micrometer on the carriage and moving it up and down and see/fix the error. But I understand that this was more of a proof of concept. Nice work.
Your vibration could be reduced by increasing your flywheel effect maybe by adding weight to the headstock drive pulley, this looks like Alluminium, steel might help or a custom made heavier
Dami kong natutunan boss 16 yrs old here.
Inspirerande!!!!!!. Tack för att du delade länkar till var man får tag på allt man behöver!!!!.Jag kommer att bygga en liknande som din men lite större och med lite andra möjligheter. Men grund idén blir nästan exakt likadan. Tack igen!!!!!!.
How to make the lathe very nice, thank you for sharing! I really want to make a lathe like you.
Admirable tu trabajo te felicito
I love the work you did. I just wanted to know if there is a way to post a list of the parts and the dimensions of everything? I want to build one for myself but have no idea of the dimensions like how wide the base is. I got that it is 23" long but don't even know the dimensions of the base plate you put on the sliders.
Nice work and very good and it is easy to apply and thank you from the bottom of our hearts from poor countries, which can not afford its modest members to buy expensive machines
Thank you so much. I was looking to improvise lathe flange i didn't know how to do it, but that first chucking shaft and then welding is really great idea to centre it! Thanks!
Excelente eres un genio siempre sigo sus proyectos aunque no sea del mismo idioma pero lo que construye abla por si solo gracias felicitaciones dios lo bendiga saludos
Looks surprisingly good! And a lathe like this, is waaay better than no lathe at all! Job well done!
I love a man who knows how to improvise, and I love the rooster in the background, reminds me of my grandmother's house when I was a child. If there is a super CME that takes out all our utilities and electronics, guys with roosters in the background are going to be the only ones surviving.
Greetings from Russia!!! I'm going to make the machine myself . Your video is only added to the desire. Thanks!!!
Bravo!una domanda:ho visto che non hai usato nessun disegno con relative misure?hai fatto tutto ad occhio nudo?
nice project, well done. this guy will survive an apocalypse. might buy two cone pulleys and get three or four spindle speeds
Besides hammering right on the bearings You did a great job. You show that there is no such a thing like too hard when it comes do diy job😀🔧
Great ideas and ability. I had an uncle like that, he could build first class labor saving machines out of old auto parts.
When you return with the cutting tool after making a cut, you should move it away from the material. You'll get a better surface finish :)
You are simply amazing. Keep it up! I am learning a lot from you!
Good for you bro. Goodluck :)
Sek Austria Thankyou so much. Good luck to you too bro!
Outstanding work, and video. Thank you for sharing.
I wish you don't mind if I give you some constructive comments: 1. The chuck is the last thing you should mount on the lathe. Weld the flange for the chuck on the shaft at first. Then you can lathe the flange to fit on the chuck that will be perfectly centered. Welding afterwards makes changes to the metal. 2. You don't need three bearings in line, not on the slide rails neither the short spindle shaft. The middle bearing is practically unnecessary.
Please keep in mind that welding zink plated steel (nuts, bolts) makes very harmful fumes. Weld outside or direct fan at it to blow the fumes away. Great project!
Great job! I think that you could improve the quality of finish and accuracy by making it more rigid. I was thinking about doing something similar but adding concrete to the structure for rigidity.
pracujem na podobnom ale večšom projekte do konštrukcie som dal armovany beton dosť navýšilo váhu stroja uvidím
Super! It's realy acurately and unhardness processed project withouot use costly machines!
grabe idol to... pangarap kong magkaron ng lathe
23:35 I am sure there are dozens of other comments about this but never leave the chuck key in the chuck like that, it is a very common injury and can really ruin your day. Also you should make an arbor press soon to help with seating bearings and other press fitting operations, hitting bearings like that with a hammer is a good way to cause unneeded premature damage and wear to the bearing races, and always make sure you are applying the force to the part of the bearing that is fitting into the housing or on the shaft as ball bearings are not that good at handling excessive axial load and can be damaged pretty easily if you exceed the ratings
Yes and never leave the jaws free.
Boa tarde! Por gentileza quais as medidas dos mancais e do tarugo de aço aguardo obrigado att Alexandre Brasil SP...
very nice job so far! i would be interested in adding some 3d printer parts and joystick or button controls to a design similar to that. would be neat to have it capable of being both manually operated as well as programmed on the pc.
Great ... man. You are inspiring people of this planet.
Tooling angle is slightly high, and too close to 90° to the cutting surface for me. Add some relief by using a tooling block with a radius cut on one side. Should take care of both issues. How accurate is the bed, and do you plan a tail stock? Nice build, btw!
I can't imagine it being to accurate being the cross slide was installed using a square. However with a dial indicator he may have enough play in the bolt holes to bring it in. Same thing for the the rails on the bed way he could adjust the spindle bearings to be parallel. I cant see this being as good as what you can get for $600 - $700 in a mini. It might have a bit more swing but would take a lot to get it dialed in. But I give him props for building it anyway. I might have to see if he has a video with it dialed in any better. You are very correct about the angle of the tool. I wish him the best of luck.
Filha
Extremely impressive build given the few simple tools you used. But be very careful when using that machine. Only the spinning momentum of that little chuck will surprise you if you give it as much as a chance. Even heavy factory built precision lathes can behave a bit unpredictably at times depending on the work. Please keep all of your fingers, you will need them for future projects. =)
Too much sideway torque forces exerted on the Chuck you reckon as well as the metal hardness being worked on and RPM settings....on that machine seems to be only one speed setting..
Parabens! melhor video de torno caseiro que vi, vou fazer um!!!
Mestre das ferramentas muito bom o vídeo tá de parabéns
Beautiful job, dude! 😃 Really fantastic work!
Thanks bro :)
looks about the same precision as a $500.00 Chinese mini lathe although it needs dials so ya know what your taking off your parts. not something i would use but if it gets the job done ya need thats all that matter and kuddos for taking a pile of scrap and making a usable tool out of it ,it was fun to watch thanks for sharing
Chaina ke gand me ghuja
It is $400 Phillipino lathe :)
You have a very inventive mind. Ive watched a lot of your videos. I subscribed btw!
The best from scratch lathe build on you tube. way better than open source wood and concrete ones.
Parabéns Sek Áustria, é o mini torno mais bonito que já vi. Vou pegar o seu modelo como total referência. O difícil é encontrar o trilho linear e suas caixas, aqui no Brasil não tem pra comprar. Mesmo assim vou tentar fazer. Abraço.
I could quibble a LITTLE on some details (I'd have used countersunk screws on the top of the cross slide, etc), but generally I'm very impressed! My ONE suggestion would have been to use a larger shaft... that chuck is going to make a LOT of side-load, and flex that shaft a LOT. I'd have used at least double that diameter - which, granted, would drive up the cost of the pillow blocks... Still, in total, WELL DONE! (Oh, and PS... COVER your WAYS when grinding! :-) )
Thanks for sharing. It's people like you who transform the world for the better.
Check my description links. Thanks bro.
@@SekAustriaRight. It was my fault. I just watched it later.
Excelente!!! Quando você colocou o motor imaginei que ele não seria tão forte. Más quando você torneou aquele pedaço de guia linear de aço duro e cromado provou que não é necessário um motor tão forte quanto os que nós vemos em outros tornos. Parabéns pelo excelente trabalho!!! 👏👏👏