DIY steel wheel banding using barrels or 2 steel wheels.
Пікірлер
Man your a bloody genius that’s a tuff job getting a wheel straight enough for a car especially at home with a make shift set up ..brilliant. Thats the coolest nicest mk1 transit I’ve ever seen , I’ve seen the Icelanders do the fire thing to get there tyres back on after tracking out on the ice only they do it with the wheel and tyre still on there trucks lol it’s a cool trick and works so effectively 👌👍
@bigsquatchsasfoot19642 жыл бұрын
Thanks man for the kind words 😁, yea I was surprised how well it all went myself to be honest and I’m over the moon with the result. Yea I love this Mk1 now, definitely the best vehicle I’ve ever owned. Yea the fire tyre trick we’ve used with our mates LandRovers when we’ve poped a tyre off its rim too, can’t beat a bit of fire and explosions 😂 cheers 🍻 👍
@CarJunkeez2 жыл бұрын
So good I’ve watched it again 👍👍
@mattjones72002 жыл бұрын
Ha ha cheers mate 😁 doubling up on my video 😂 I need the views mate lol 👍
@CarJunkeez2 жыл бұрын
great job mate, they look sweet, enjoyed watching this
@MrSupermink2 жыл бұрын
Thanks mate 😃 appreciated, I’m over the moon with them. Thanks for watching pal 👍
@CarJunkeez2 жыл бұрын
Great job Pal.👍🏻
@jontylye77782 жыл бұрын
Cheers Jonty 😃, appreciated mate, hope your well 👍
@CarJunkeez2 жыл бұрын
the tire changer spins slower so you might be able to weld full speen on that if you set the voltage and wirespeed right , can set the welding gun on a stand and just let her rip
@watahyahknow8 ай бұрын
Yea I’ve seen people do them and other circular stuff on tyre machines and was going to do it myself too but ended up just doing it on my balancer as was easy to just put my welding torch where my grinder was 😁 good call though mate 👍👍 cheers
@CarJunkeez8 ай бұрын
Gorgeous
@jonathanrandall55032 жыл бұрын
Thanks mate 🙏👍
@CarJunkeez2 жыл бұрын
Great video mate, where did you get the wheel barrels from? thanks
@29coupe292 жыл бұрын
Thanks mate 🙏 I got lucky with the barrels as they just cropped up on ebay mate 👍 cheers
@CarJunkeez2 жыл бұрын
Top Job !
@Alden-zq1nuАй бұрын
Thanks mate 👍👍
@CarJunkeezАй бұрын
Great job that👍👍
@turtlezed Жыл бұрын
Thanks mate 😁👍
@CarJunkeez Жыл бұрын
Proper job loved it am wanting to do this to my t4 Thanks for the tips 👍👍👍😜🏴🦕🦄😁✌🤞
@chopperhehehe Жыл бұрын
Thanks mate 🙏😃👍, I don’t know why more people don’t have a go themselves as it’s not to bad a job to do to be honest. I got sick of waiting for people so did it myself 😂 good luck with your T4 and thanks for watching mate 👍👍
@CarJunkeez Жыл бұрын
@@CarJunkeez iv been a Ford man all my days last fast car I had was a cossy sold about 7 years ago rebuilt from ground up . Looked for a mk2 transit for years and have never found anything worth doing so t4 came at right age 91 and right price Your mk1 is stunning 👍👍👍😜🏴🦕🦄😁✌🤞
@chopperhehehe Жыл бұрын
@@chopperhehehe I’ve always wanted a cossie, I should of got one when they was affordable. Yea I’ve always been a Ford man myself mate, mk1 and mk2 escorts and Fiesta’s I had loads of em back in the day and just scrapped most of them 😂 if only we knew 😆 I do like a nice t4 though mate 👍 thanks man appreciated
@CarJunkeez Жыл бұрын
@@CarJunkeez I had 9ne fiesta. I don't know how many escorts mk1s and mk2s most got the usal conversion 2l pinto and 5 speed seirra box or if lucky 2.8 capri boxlol and last 2 mk1rs turbo loved that car never had to do anything to it and final cossy wich I got fae a mate that had been dry stored for 20 years (hidden fae ex wife lol ) Still building escorts for other folk well I lend a hand lol 👍👍👍😜🏴🦕🦄😁✌🤞
@chopperhehehe Жыл бұрын
Look great definitely better than stock❤
@michaelnagy46034 ай бұрын
Thanks mate 😃👍👍
@CarJunkeez4 ай бұрын
@@CarJunkeez I'm actually going to use your method to widen my rear Volkswagen wheels love the wide stock look cheers from Ohio
@michaelnagy46034 ай бұрын
@@michaelnagy4603 awesome mate 😃 it’s so much easier and more chance of the wheel being straight 👍👍 cheers
@CarJunkeez4 ай бұрын
looks cool as
@mathewsmith12752 жыл бұрын
Thanks mate 😃 👍
@CarJunkeez2 жыл бұрын
What is that jig you have for holing the grinder? Thats pretty sick, even if its home made i gotta see it
@thepilotthatcould7178 Жыл бұрын
Cheers mate 😃 it’s only a bit of angle I welded to some sheet steel, i only did it temporarily for the job pal 👍
@CarJunkeez Жыл бұрын
Top Notch !
@doppies2000 Жыл бұрын
Cheers mate 😃👍
@CarJunkeez Жыл бұрын
Is that a tractor wheel barrel? There is no bead to hold a tubeless tire on.
@dbc105 Жыл бұрын
Not sure as I got them secondhand off eBay, but normally barrels do have at least one recess to hold tyre bead but these don’t have any. It worked out better for me anyway 😃👍
Man your a bloody genius that’s a tuff job getting a wheel straight enough for a car especially at home with a make shift set up ..brilliant. Thats the coolest nicest mk1 transit I’ve ever seen , I’ve seen the Icelanders do the fire thing to get there tyres back on after tracking out on the ice only they do it with the wheel and tyre still on there trucks lol it’s a cool trick and works so effectively 👌👍
Thanks man for the kind words 😁, yea I was surprised how well it all went myself to be honest and I’m over the moon with the result. Yea I love this Mk1 now, definitely the best vehicle I’ve ever owned. Yea the fire tyre trick we’ve used with our mates LandRovers when we’ve poped a tyre off its rim too, can’t beat a bit of fire and explosions 😂 cheers 🍻 👍
So good I’ve watched it again 👍👍
Ha ha cheers mate 😁 doubling up on my video 😂 I need the views mate lol 👍
great job mate, they look sweet, enjoyed watching this
Thanks mate 😃 appreciated, I’m over the moon with them. Thanks for watching pal 👍
Great job Pal.👍🏻
Cheers Jonty 😃, appreciated mate, hope your well 👍
the tire changer spins slower so you might be able to weld full speen on that if you set the voltage and wirespeed right , can set the welding gun on a stand and just let her rip
Yea I’ve seen people do them and other circular stuff on tyre machines and was going to do it myself too but ended up just doing it on my balancer as was easy to just put my welding torch where my grinder was 😁 good call though mate 👍👍 cheers
Gorgeous
Thanks mate 🙏👍
Great video mate, where did you get the wheel barrels from? thanks
Thanks mate 🙏 I got lucky with the barrels as they just cropped up on ebay mate 👍 cheers
Top Job !
Thanks mate 👍👍
Great job that👍👍
Thanks mate 😁👍
Proper job loved it am wanting to do this to my t4 Thanks for the tips 👍👍👍😜🏴🦕🦄😁✌🤞
Thanks mate 🙏😃👍, I don’t know why more people don’t have a go themselves as it’s not to bad a job to do to be honest. I got sick of waiting for people so did it myself 😂 good luck with your T4 and thanks for watching mate 👍👍
@@CarJunkeez iv been a Ford man all my days last fast car I had was a cossy sold about 7 years ago rebuilt from ground up . Looked for a mk2 transit for years and have never found anything worth doing so t4 came at right age 91 and right price Your mk1 is stunning 👍👍👍😜🏴🦕🦄😁✌🤞
@@chopperhehehe I’ve always wanted a cossie, I should of got one when they was affordable. Yea I’ve always been a Ford man myself mate, mk1 and mk2 escorts and Fiesta’s I had loads of em back in the day and just scrapped most of them 😂 if only we knew 😆 I do like a nice t4 though mate 👍 thanks man appreciated
@@CarJunkeez I had 9ne fiesta. I don't know how many escorts mk1s and mk2s most got the usal conversion 2l pinto and 5 speed seirra box or if lucky 2.8 capri boxlol and last 2 mk1rs turbo loved that car never had to do anything to it and final cossy wich I got fae a mate that had been dry stored for 20 years (hidden fae ex wife lol ) Still building escorts for other folk well I lend a hand lol 👍👍👍😜🏴🦕🦄😁✌🤞
Look great definitely better than stock❤
Thanks mate 😃👍👍
@@CarJunkeez I'm actually going to use your method to widen my rear Volkswagen wheels love the wide stock look cheers from Ohio
@@michaelnagy4603 awesome mate 😃 it’s so much easier and more chance of the wheel being straight 👍👍 cheers
looks cool as
Thanks mate 😃 👍
What is that jig you have for holing the grinder? Thats pretty sick, even if its home made i gotta see it
Cheers mate 😃 it’s only a bit of angle I welded to some sheet steel, i only did it temporarily for the job pal 👍
Top Notch !
Cheers mate 😃👍
Is that a tractor wheel barrel? There is no bead to hold a tubeless tire on.
Not sure as I got them secondhand off eBay, but normally barrels do have at least one recess to hold tyre bead but these don’t have any. It worked out better for me anyway 😃👍