KZhead

Woodworking: Super Simple Floating Nightstands

Fisher's Shop
2024 ж. 22 Мам.
65 801 Рет қаралды
Жүктеу

Website: www.FishersShopOnline.com
Plans: www.FishersShopOnline.com/plans
Instagram: / fishersshop
Store: www.Amazon.com/shop/fishersshop
T-Shirts: www.FishersShopOnline.com/store
Podcast: webuiltathing.libsyn.com/
Join Fisher's Shop!
/ @fishersshop
I was in need of some new nightstands for the bedroom, and I figured why not make them float right off the wall? And why not make them match the valet stand I made earlier? This video shows you how to make some fantastic-looking floating nightstands that are actually very simple to assemble. This is a great beginner to intermediate project for the hobby woodworker and my step-by-step plans on my website make it even easier!
Chapters:
00:00 - Intro
01:50 - Milling
03:19 - Panels
04:34 - Finger Joints & Dados
06:34 - Assembly
07:47 - Roundover & Filling
08:53 - Drawer
12:38 - Drawer Face
13:16 - Drawer Pull
14:09 - Cleat
14:45 - Finish
15:35 - Glamour Shots
16:02 - Install
17:54 - Outtakes
Affiliates:
CadenceMfgDesign.com - "FISHER10" to save 10%
SurfPrepSanding.com - "FISHER10" to save 10%
Starbond.com - "FISHER10" to save 10%
Mag-Tools.com - "FISHER10" to save 10%
Merlin-Technology.com - "FISHER10" to save 10%
TersaKnives.com - "FISHER10" to save on RALI products
Bumblechutes.com - "FISHER10" to save 10%
RZmask.com - "FISHER10" to save 10%

Пікірлер

  • How do you not have a million subs? Between the quality of the projects. the detail of the procedures, and the hilarious commentary, you're way better than most of the other makers on YT. Good job Drew!

    @travisg1759@travisg17596 ай бұрын

    • Thanks, I appreciate that! A lot of work goes into each video. But I guess to answer your question, I don't release videos fast enough to keep momentum and grow faster. That, or YT hates me. Could be both.

      @FishersShop@FishersShop6 ай бұрын

    • Truly...this is one of the most creative, fun, and relaxing channels I know, plus there's always something to learn. But that's how the world is made, often the best are found among the losers... Greetings from Italy...👋👋 Paul

      @alpavlich6189@alpavlich61896 ай бұрын

    • Completely agree 😊

      @tendring_woodturning@tendring_woodturning6 ай бұрын

    • @@FishersShop I have been doing weekly releases, but only under 80 subs. I guess because you don't put stupid faces on thumbnails and you dont do deal videos every other day. But I like your videos.

      @Fusion_Woodworking@Fusion_Woodworking6 ай бұрын

    • Very nice work. If you decide to make 1 video a week, your subs will explode. However, you do things your way and be content.

      @matteberry58@matteberry586 ай бұрын

  • Beautiful pieces. Even though I’ll never sleep in that bed, I’ll speak for Mrs. Fisher… make her a matching head board.

    @andrewhochberger8748@andrewhochberger87485 ай бұрын

    • In process of doing that right now

      @FishersShop@FishersShop5 ай бұрын

  • The headlight flash at the end was the icing on the cake lmaoo

    @TheMilfMoncher@TheMilfMoncher6 ай бұрын

  • I saw your notification, but waited till I was sure there will be no interruptions to watch. Quality time to savour every second 😊

    @helenablignaut662@helenablignaut6626 ай бұрын

    • Hope you enjoyed it! :)

      @FishersShop@FishersShop6 ай бұрын

  • Sweet project, clear funny voiceover, another classic Fisher offering.

    @RichardMerrill3Hawk@RichardMerrill3Hawk6 ай бұрын

    • Thank you kindly!

      @FishersShop@FishersShop6 ай бұрын

  • Great job, Drew, as usual. Your neighbor sure is lucky. Bill

    @williamellis8993@williamellis89936 ай бұрын

    • Soooo lucky

      @FishersShop@FishersShop6 ай бұрын

    • We are the lucky ones!

      @pjhalchemy@pjhalchemy6 ай бұрын

  • This man is marvelous! Half a man half a jig! 🎉

    @milosgrujic9118@milosgrujic91184 ай бұрын

  • Nice. Love the finish. I was anxious that the neighbor wasn't going to make the cut on this one...LOL

    @tuesboomer1623@tuesboomer16236 ай бұрын

    • Thanks!

      @FishersShop@FishersShop6 ай бұрын

  • Next project - gorgeous headboard to match the night and valet stands

    @BoilerFlt19@BoilerFlt196 ай бұрын

    • In process!

      @FishersShop@FishersShop5 ай бұрын

  • The other stud in the room, lol. Great commentary - very encouraging.

    @anneoreilly4900@anneoreilly49005 ай бұрын

    • Thanks!

      @FishersShop@FishersShop5 ай бұрын

  • Genuinely my favourite woodworking channel! The way you present your builds makes them feel accessible, like anyone could do it, but the sheer quality of your work is that of a true craftsman!

    @richbaker8211@richbaker82116 ай бұрын

    • Thanks a ton! :)

      @FishersShop@FishersShop6 ай бұрын

  • Whenever you pulled the stud finder out, I quietly hoped you would make the obvious joke. I was not disappointed. Thank you. Now that you have these excellent, black walnut floating nightstands, you now also need an excellent, black walnut, fourposter bed frame to go with them.

    @vengervoldur6534@vengervoldur65345 ай бұрын

    • Thanks! Headboard is next!

      @FishersShop@FishersShop5 ай бұрын

  • That piece of dust blooper 😂. Made me laugh.

    @waynesullivant@waynesullivant6 ай бұрын

    • It surprised me! haha

      @FishersShop@FishersShop6 ай бұрын

  • Next project, a matching headboard! 😁😁

    @Kal-el_of_Krypton@Kal-el_of_Krypton6 ай бұрын

    • Already in the works!

      @FishersShop@FishersShop6 ай бұрын

  • Love all of your videos. Glad you decided to help out your neighbor😃

    @TheWhatsit789@TheWhatsit7895 ай бұрын

    • Hehe thanks!

      @FishersShop@FishersShop5 ай бұрын

  • Always get a good giggle from the scripts on your vids "my gang sign" 😂

    @jm_mort@jm_mort6 ай бұрын

    • :) Thanks for watching

      @FishersShop@FishersShop6 ай бұрын

  • “Now let me over complicate everything, and make it much harder than it actually is” - Drew and every woodworker ever on every project. 😂 Beautiful work sir, and well worth the overcomplicating lol.

    @Griffinwoodworks@Griffinwoodworks6 ай бұрын

    • Thank you very much! 😊

      @FishersShop@FishersShop6 ай бұрын

  • Well I guess now that you have the nightstands and valet, can we expect a full matching dresser build for the complete set? That outtake with the piece of dust was so funny, I was not expecting that.

    @woodnotestudio@woodnotestudio6 ай бұрын

    • Haha. Headboard and bench for the bedroom are next!

      @FishersShop@FishersShop6 ай бұрын

  • As usual Drew a Cracking video from you those two Floating Nightstands look beautiful, i always enjoy watching your videos both what you are making and the funny commentary that you do, oh, and of course the Outtakes which i had to laugh at the one with the CA Glue with the bit of dirt/dust, plus the last one where your wife was standing there and the sheer look of shock on your face, like you had been caught with your Neighbours reading material (shall we say) which you found on his porch, while you were leaving him your other Nightstands, was just a classic. Take Care and Stay Safe. Barry (UK)

    @barryroberts6470@barryroberts64706 ай бұрын

    • Haha thanks Barry!

      @FishersShop@FishersShop6 ай бұрын

  • I think you should build a matching headboard. That would be awesome.

    @michaeloswald3589@michaeloswald35896 ай бұрын

    • Coming next

      @FishersShop@FishersShop6 ай бұрын

  • stud finder jokes .... love it !

    @jerrybailie@jerrybailie6 ай бұрын

  • Drew, once again you have produced not only a great project but continue to entertain with your self deprecating, humorous and humble methods. I just can't believe your neighbor still has any raw materials for you to keep steali..... borrowing from.

    @clemgriffis3446@clemgriffis34466 ай бұрын

    • :) Thanks!

      @FishersShop@FishersShop6 ай бұрын

  • "the other stud in the room" took me a second. My first thought was who built this house with only one stud then, oh, you mean you. Haha, great looking project turned out way better than the ones they replaced😂

    @AndrewMcQuillen@AndrewMcQuillen5 ай бұрын

    • Haha. Thanks!

      @FishersShop@FishersShop5 ай бұрын

  • "my gang sign" LOL

    @seanm.kingsr.1384@seanm.kingsr.13845 ай бұрын

  • Whenever I will be using brass screws, I ALWAYS use an equivalent steel screw first to establish the threads, then take it out and use the brass one. I have learned this the hard way.

    @paulheitkemper1559@paulheitkemper15596 ай бұрын

    • Me too

      @chipperkeithmgb@chipperkeithmgb6 ай бұрын

    • Yeah, I should have just waxed the threads. Slipped my mind

      @FishersShop@FishersShop6 ай бұрын

  • It's quite refreshing to see nightstand design that does not have hidden compartment for firearm.

    @turkkaholmqvist4640@turkkaholmqvist46406 ай бұрын

  • What a joy to have another Fisher’s Shop episode!

    @queensillybritches@queensillybritches6 ай бұрын

    • Aww thanks! :)

      @FishersShop@FishersShop6 ай бұрын

  • This is another great video fisher and amazing work again!!

    @devinreynolds-FDW@devinreynolds-FDW5 күн бұрын

    • Glad you enjoyed it

      @FishersShop@FishersShop4 күн бұрын

  • They look very nice. Now for a matching headboard for the bed.

    @gregrambow174@gregrambow1745 ай бұрын

    • Coming next

      @FishersShop@FishersShop5 ай бұрын

  • Thanks Drew. These look like maybe even I could make them, probably not! Thanks for the flat head screw. To prove I watched till the end it is nice to know that you share with your neighbor. Thanks for sharing Drew!

    @davidmeyer9204@davidmeyer92045 ай бұрын

    • Thanks for watching

      @FishersShop@FishersShop5 ай бұрын

  • I was wondering if the bandaid was going to make the bloopers! Glad it was a tiny cut. Although I've noticed that as soon as you get a cut, EVERYTHING you touch seems to, well, touch the cut.

    @hansangb@hansangb3 ай бұрын

    • Haha, yeah

      @FishersShop@FishersShop3 ай бұрын

  • The Holidays are here! Another Fisher’s Shop! Thank you!

    @DugMcClure@DugMcClure6 ай бұрын

    • Enjoy!

      @FishersShop@FishersShop6 ай бұрын

  • Very nice work. It's easy to see your skills have improved over the years and I enjoy the humor.

    @donproctor3445@donproctor34456 ай бұрын

    • Awesome, thank you!

      @FishersShop@FishersShop6 ай бұрын

  • These nightstands turned out beautiful Drew! It’s always cool to hear you guys talk about stuff on the podcast and then see it come into fruition in the videos!

    @mcmathwoodworks@mcmathwoodworks6 ай бұрын

    • Thanks!!

      @FishersShop@FishersShop6 ай бұрын

  • Ha! Your comments about the handplane are hilarious! I hope everyone is happy now. 😊

    @justonbohannan@justonbohannan6 ай бұрын

    • Haha, they'll never be happy

      @FishersShop@FishersShop6 ай бұрын

  • Happy to see something that didn't need the CNC or laser. I know there's a lot of "love it or hate it" over those two but mostly I just dislike thier use in projects because I don't have either so I can't replicate anything needing them.

    @AlexInASmallTown@AlexInASmallTown6 ай бұрын

    • They're super fun though. Thanks for watching

      @FishersShop@FishersShop6 ай бұрын

  • Nice set of nightstands Drew! Somehow I felt vindicated when the screw broke... one less slotted screw in the world. Keep up the good work!!

    @ruiantunes766@ruiantunes7666 ай бұрын

    • Haha thanks

      @FishersShop@FishersShop6 ай бұрын

  • Next step could be making a headboard and migrating the cleats to it. That way no matter where you put the bed, the nightstands are correctly spaced from it.

    @KyleShevlin@KyleShevlin6 ай бұрын

    • Yup that’s coming next!

      @FishersShop@FishersShop6 ай бұрын

  • Good to see you back over the saw dust pile.

    @henrysara7716@henrysara77166 ай бұрын

    • Thanks 👍

      @FishersShop@FishersShop6 ай бұрын

  • Oooo you need a headboard now.. next video please! Can’t wait you are one of my favourites

    @cindyburr369@cindyburr3696 ай бұрын

    • Thanks! Yup, it's already in the works

      @FishersShop@FishersShop6 ай бұрын

  • Love the look. That flamed walnut could be a guitar top :P Now with such a clean look, make sure you get some cable management for that mess on the floor. The other stud in the room... lol

    @andresilva8444@andresilva84446 ай бұрын

    • Yup, all those wires are gone now

      @FishersShop@FishersShop6 ай бұрын

  • Your videos are so educational & entertaining. Plus, I love all the unnecessary walnut you use in your projects...

    @indyfastal@indyfastal6 ай бұрын

    • Thank you very much!

      @FishersShop@FishersShop6 ай бұрын

  • You know what I recommend for filling small gaps. Apply some poly where the gaps are and sand with higher grit like 220+ without the vacuum on. The dust bonds to the poly and fills the gaps. Poly won’t stay on the surface. It’s super fast and works great. Don’t be shy with the poly. Make sure it’s worked into the gaps very well.

    @billm1651@billm16516 ай бұрын

    • Interesting

      @FishersShop@FishersShop6 ай бұрын

    • That is interesting. Thanks for sharing that tip!

      @CM-er8tv@CM-er8tv5 ай бұрын

  • I'm really sensing a food/wood theme here. No more PB filler; instead wood dust that you can use on your cereal. And, the drawer full of Halloween candy. No wonder your horizons are broadening 😉. Great project, as usual. Love that walnut!

    @barnabyjones8333@barnabyjones83336 ай бұрын

    • Hehe thanks!

      @FishersShop@FishersShop6 ай бұрын

  • This was an amazing build Drew. You'd probably get a laugh out of my wife's and my night stands. One is a table my dad made for his living room that I inherited when he passed and my wife's is a little table thing that's actually made to be a night stand. But still absolutely hideous. I might get these plans

    @woodworkingandepoxy643@woodworkingandepoxy6435 ай бұрын

    • Haha! If you do, I hope you enjoy the build

      @FishersShop@FishersShop5 ай бұрын

  • The snack drawer brought a tear to my eye. Was surprised at the low ratio of M&M's., though...

    @AVCONSULTTX@AVCONSULTTX6 ай бұрын

    • It was my son's Halloween collection. Not so many M&Ms because I've already collected and consumed the "Dad tax"

      @FishersShop@FishersShop6 ай бұрын

  • The middle piece would’ve looked more traditional as a stopped dado, that said that’s some fancy walnut grain on the top

    @RobbieBeswick@RobbieBeswick6 ай бұрын

  • Yet another GREAT project Drew. Happy Holidays to, the family AND your neighbor. It ain't easy living next to you. He has no firewood for the winter OR a deck! !! !!!

    @Sebastopolmark@Sebastopolmark6 ай бұрын

    • Same to you!

      @FishersShop@FishersShop6 ай бұрын

  • You do not do a lot of videos ,but when you I watched them ,you are a real craftsmen in my opinion .I have been woodworking for 30 yrs and still love learning.Julien

    @katherynlamarche7308@katherynlamarche73086 ай бұрын

    • Thanks so much! I sure appreciate that!

      @FishersShop@FishersShop6 ай бұрын

  • You're soo right, finger joints and roundovers are dope!

    @Captain-Wyatt@Captain-Wyatt5 ай бұрын

    • Yeah, I dig the look

      @FishersShop@FishersShop5 ай бұрын

  • Very nice Drew! I’m surprised you didn’t mention cutting down your neighbors walnut tree 😂

    @jeffwilder7117@jeffwilder71176 ай бұрын

  • I’ve watched your work for years and love your style of design and humor. Another great project

    @FB_Woodshop@FB_Woodshop6 ай бұрын

    • Thank you very much!

      @FishersShop@FishersShop6 ай бұрын

  • Love the floating design

    @jameslarson6555@jameslarson65555 ай бұрын

    • Glad you like it!

      @FishersShop@FishersShop5 ай бұрын

  • uh oh... looks like someone moved Ikea nightstands. Everyone knows that where you build those things is where they should stay. Even moving them an inch will cause them to fall apart! :) Love the new ones!

    @WouldWorkforWoodWork@WouldWorkforWoodWork6 ай бұрын

    • Haha, yeah. Thanks!

      @FishersShop@FishersShop6 ай бұрын

  • I always check if there is a new video

    @polishhammer2119@polishhammer21196 ай бұрын

  • Always one of my absolute favorite woodworkers with your antics and work. I've learned a lot watching you and I incorporate it in my work...and my channel. I appreciate what you do by bringing laughter to us all. Thank you!

    @CharlieMikeWoodworks@CharlieMikeWoodworks5 ай бұрын

    • Thanks much!

      @FishersShop@FishersShop5 ай бұрын

  • They're beautiful 😍😍 next is an epic headboard? 😬

    @portaamber@portaamber6 ай бұрын

    • You guessed it!

      @FishersShop@FishersShop6 ай бұрын

  • Awesome from beginning to end Drew! Thank you!

    @gbonnell@gbonnell6 ай бұрын

    • Glad you enjoyed it!

      @FishersShop@FishersShop6 ай бұрын

  • Very nice! Thanks for the humor as well as the advice on building these night stands. I hope to build at least two of them in the next month.

    @nazpasfred3@nazpasfred35 ай бұрын

    • Have fun!

      @FishersShop@FishersShop5 ай бұрын

  • Nice looking nightstands!

    @EvanDunville@EvanDunville4 ай бұрын

    • Thanks!

      @FishersShop@FishersShop4 ай бұрын

  • I only subscribe to a few woodworkers on KZhead, and Drew is one of them. Love the content and the step by step instructions. Always excited to see Fisher's Shop drop a new video.

    @godisgoodwoodworks4801@godisgoodwoodworks48016 ай бұрын

    • Thanks! :)

      @FishersShop@FishersShop6 ай бұрын

  • Well done Drew

    @franmusolino2660@franmusolino26605 ай бұрын

    • Well thanks

      @FishersShop@FishersShop5 ай бұрын

  • I recommend having tissues on hand when clamping the snot out of something.

    @bytesizedengineering@bytesizedengineering5 ай бұрын

    • Good call! 😂

      @FishersShop@FishersShop5 ай бұрын

  • I like the 'Sponge Bob' location drawer pulls

    @dpmeyer4867@dpmeyer48675 ай бұрын

    • lol... thanks?

      @FishersShop@FishersShop5 ай бұрын

  • We have very little space to work with on either side of the bed, these would work great. Entertaining video with straightforward explanations, subscribed! 👍🏼

    @mr.e8432@mr.e84325 ай бұрын

    • Glad it was helpful! Welcome!

      @FishersShop@FishersShop5 ай бұрын

  • Love your outtakes.

    @lonniethomas9351@lonniethomas93515 ай бұрын

    • :)

      @FishersShop@FishersShop5 ай бұрын

  • You make it look so easy. If only... 🤔

    @jeffreyknotts4148@jeffreyknotts41485 ай бұрын

  • Well done Mancy Drew! They turned out beautiful!

    @Crazyiz@Crazyiz6 ай бұрын

    • haha, thanks!

      @FishersShop@FishersShop6 ай бұрын

  • They look great can’t beat walnut.

    @michiganracer1181@michiganracer11816 ай бұрын

    • I agree

      @FishersShop@FishersShop6 ай бұрын

  • I love the idea of a floating nightstand. Especially when it's full of candy! :)

    @whamases@whamases6 ай бұрын

    • Right?!

      @FishersShop@FishersShop6 ай бұрын

  • Stunning nightstands, Drew! Fantastic work!!! 😃 But hey, I'm going to build some hand screw clamps... The hardware just arrived! You should do the same, it would help a lot with small pieces on the router table. 😉 Anyway, stay safe there with your family! 🖖😊 And happy holidays!

    @MCsCreations@MCsCreations6 ай бұрын

    • But then I can't mess with the safety police. :)

      @FishersShop@FishersShop6 ай бұрын

    • @@FishersShop Hmmm... Good point... 🤔

      @MCsCreations@MCsCreations6 ай бұрын

  • Now just need to make a matching bed.

    @plasmac9@plasmac95 ай бұрын

    • Working on it

      @FishersShop@FishersShop5 ай бұрын

  • Drew, what a nice project it turned out great. I must say you turn out some nice work and I enjoy your commentary with some comedy sprinkled in. Absolutely one of the best channels

    @guybowers9094@guybowers90946 ай бұрын

    • Thanks a bunch!

      @FishersShop@FishersShop6 ай бұрын

  • Love your videos, Drew! Keep 'em coming. 😀

    @CM-er8tv@CM-er8tv5 ай бұрын

    • Thanks! Will do!

      @FishersShop@FishersShop5 ай бұрын

  • I hope you kept the outer edge offcuts. Those have a beautiful character and color. I'm sure you can find something that requires some necessary walnut.

    @tomcatfoolery@tomcatfoolery5 ай бұрын

    • That's the plan!

      @FishersShop@FishersShop5 ай бұрын

  • personally I'm not out there trying to batch parts out for anyone besides me and maybe some family. I just enjoy using the planes for what they are. Hand tools are cool, but so are CNCs :D

    @SamJantz@SamJantz6 ай бұрын

    • I agree! Hand planes ARE fun. But so are lasers and CNCs. haha

      @FishersShop@FishersShop6 ай бұрын

  • Very nice work Drew. Thanks for sharing.

    @AndrewR74@AndrewR746 ай бұрын

    • Thanks for watching

      @FishersShop@FishersShop6 ай бұрын

  • I think they’re fantastic too!

    @markglabinski526@markglabinski5266 ай бұрын

    • Thanks!

      @FishersShop@FishersShop6 ай бұрын

  • Very cool. Great job as expected. Thanks for posting.

    @jeffforbes3772@jeffforbes37725 ай бұрын

    • Glad you enjoyed it

      @FishersShop@FishersShop5 ай бұрын

  • That finish is amazing. The wood grain is the best part

    @ModerndayJedi@ModerndayJedi6 ай бұрын

    • I agree! Thanks for watching

      @FishersShop@FishersShop6 ай бұрын

  • Hi Drew, love the channel! One thing I wanted to request that I've seen done elsewhere... If you're able to include a list of the tools you use in your description it would be awesome. I know you do for sponsored tools, but I really mean listing every tool. I'll often see some little square or other small tool and think "that's cool, where do I get one of those?" Would be awesome to have a list included in each video description. Keep up the good work!

    @MikloschSander@MikloschSander6 ай бұрын

    • I'll take it into consideration. Not a bad idea

      @FishersShop@FishersShop6 ай бұрын

    • Thanks Drew! A couple of good examples of what I mean are Michael Alm and Brad from Fix This Build That. They tend to list everything they used, right down to the earbuds 😊

      @MikloschSander@MikloschSander6 ай бұрын

  • Time to build a walnut headboard!

    @dutchswan4009@dutchswan40095 ай бұрын

    • It's in the works as we speak

      @FishersShop@FishersShop5 ай бұрын

  • I always love your outtakes! Night stands look great!

    @howler5000@howler50006 ай бұрын

    • Glad you like them!

      @FishersShop@FishersShop6 ай бұрын

  • Ah Drew, laugh out loud funny and great design... Not only are the nightstands great but even the tools youve made are too... that finger joint jig was so simple yet so clever. Thanks for the wonderful education and entertainment, much appreciated. 👍🙏👏😄

    @judebrown4103@judebrown41036 ай бұрын

    • Thanks so much! :)

      @FishersShop@FishersShop6 ай бұрын

  • Drew you love poking the bear with flat head screws.

    @MadStacks007@MadStacks0076 ай бұрын

    • That I do

      @FishersShop@FishersShop6 ай бұрын

  • I really like the look of roundovers on finger joints. I've done it with plywood, too, and that's a pretty cool look for some uses.

    @am2dan@am2dan6 ай бұрын

    • Yeah, I like it too

      @FishersShop@FishersShop6 ай бұрын

  • Beautiful Drew! Far superior to any store bought crap. Love that it matches with the valet stand

    @jewdd1989@jewdd19896 ай бұрын

    • Thanks 👍

      @FishersShop@FishersShop6 ай бұрын

  • Really nice Drew.

    @thomaskelly1228@thomaskelly12286 ай бұрын

    • Thank you kindly

      @FishersShop@FishersShop6 ай бұрын

  • Great job, Drew! I always look forward to your videos - just wish they were as frequent as they used to be. Are you dreaming/thinking/planning/hoping to build a headboard next?

    @qapla@qapla6 ай бұрын

    • Yes I am! That’s next. Already got the slab

      @FishersShop@FishersShop6 ай бұрын

  • Great simple design!

    @specialsauce305@specialsauce3055 ай бұрын

    • Thank you! 😊

      @FishersShop@FishersShop5 ай бұрын

  • Damn Skippy !!!!

    @stevetyler3016@stevetyler30166 ай бұрын

    • I prefer Jif

      @FishersShop@FishersShop6 ай бұрын

  • Nice work, did i miss the part where you purloined essential items from your neighbour? Has neighbour moved away yet ? Had neighbour ran out of anything usable? Using drill driver with flat head screws and no slip outs ... Show off !!😂😂

    @JohnColgan.@JohnColgan.5 ай бұрын

  • Beautiful. Nice work.

    @kennethbrooks9818@kennethbrooks98186 ай бұрын

    • Thank you!

      @FishersShop@FishersShop6 ай бұрын

  • The nightstands turned out gorgeous and how nice that they are floating to make vacuuming underneath a breeze! Got a huge laugh from you trying to fill the piece of dust with CA and the duct tape holding the original nightstands together. As if duct tape wasn't funny enough it was PURPLE!!! Seriously, you do beautiful work and are truly a gifted woodworker not to mention you would be a total success as a stand up comic. Thanks for another great video and lots of laughs. Happy holidays to you and your family!

    @SawdustmakerLori@SawdustmakerLori6 ай бұрын

    • Thanks so much Lori! :)

      @FishersShop@FishersShop6 ай бұрын

  • Happy Thanksgiving.

    @gsilcoful@gsilcoful6 ай бұрын

    • Same to you!

      @FishersShop@FishersShop6 ай бұрын

  • Excellent project. 👍👍

    @thebobloblawshow8832@thebobloblawshow88326 ай бұрын

    • Many thanks

      @FishersShop@FishersShop6 ай бұрын

  • Im glad you embraced the heart wood. I personally find it lovely in many applications. Well done!

    @5280Woodworking@5280Woodworking6 ай бұрын

    • Thank you very much!

      @FishersShop@FishersShop6 ай бұрын

  • Beautiful!

    @blevit4354@blevit43546 ай бұрын

    • Thank you!

      @FishersShop@FishersShop6 ай бұрын

  • Beautiful project Drew.

    @tonywebb3867@tonywebb38676 ай бұрын

    • Thanks!

      @FishersShop@FishersShop6 ай бұрын

  • Drew these nightstands turned out amazing and look absolutely beautiful the grain and sapwood looks amazing keep up the amazing work. Always love your videos and outtakes.

    @jimrosson6702@jimrosson67025 ай бұрын

    • Thanks so much!

      @FishersShop@FishersShop5 ай бұрын
KZhead