Very clever thinking to spin the engine over this way!! Saves batteries, starter, and don't need starting fluid to make it try to start!
@user-nj1qo7cg8k23 күн бұрын
Run it with NO fuel and on compression for five minutes, then add fuel. It's cold, it won't start until it's heated. Right at the end, the tractor should have declutched and the engine would have taken off
@user-xh2so8ef3o23 күн бұрын
Pony motors were great.
@raylamp450523 күн бұрын
My father in law sold an engine like this and the people who bought it did this very thing. And it started. The governor was frozen and the engine ran wild, the clutch on the cat engine blew first, shrapnel everywhere. Beware.
@roykey342219 күн бұрын
This is their first Rodeo for sure.
@johnstoffel588520 күн бұрын
Good luke
@user-sl2rw6il4j21 сағат бұрын
Just subscribed to the channel I want to see the Cat come to life!
@caesar129520 күн бұрын
Oh man, the video ends right at the "money shot"!! Hope there's a part 2?
@funkinflugen27 күн бұрын
Yeah my camera cut out right when it was getting good. I'll post another video of it running soon
@buckeye103426 күн бұрын
Did you end up giving it a little bit of starting fluid that might have helped?
@rudycarlson824520 күн бұрын
Looks like a sawmill cat
@Kenny-zh5vr16 күн бұрын
waiting for part 2, i have a big OLD Cummins i start the same way
@catman1313131323 күн бұрын
By indicating its cold use a rosebud burner down the intake in cycles while it being turned over. That'll help unjam the stuck rings enough to start. Also use the clutch on tge engine that's heavier to take the abuse. That lil tractor won't hold up to that.
@mchl823 күн бұрын
What’s happened with the stater engine
@Yellow_iron_and_spanners17 күн бұрын
This how im going to start my dozer from now on lol
@dakotak843716 күн бұрын
Fromcornwall
@user-sl2rw6il4j21 сағат бұрын
Old pc diesel probably needs a bit of heat to get it going
@dougbawden432117 күн бұрын
Cosby sauce!😫
@mikeCAT-D813A23 күн бұрын
Amateurs 😂😂😂
@austinlloyd975723 күн бұрын
IMT 558
@Nikola12YT10 күн бұрын
Isn’t that the wrong rotation?
@7018cowboy19 күн бұрын
Looks backwards to me!
@MrMikey402617 күн бұрын
If I'm seeing it right, looks like CCW when looking at the flywheel end. I believe this is correct for many industrial engines.
@mikejohnson461717 күн бұрын
Unless the tractor has a reversible PTO, then yes, it would seem so. Intuitively, logic would dictate that both the tractor engine/PTO and slave engine should be rotating in the same direction, however, some engine variants are built for opposite rotation. If we look at what appears to be the exhaust stub, we can clearly see that's where the exhaust gasses are coming from. If the engine was turning backwards, any exhaust gasses produced would be issuing from the inlet manifold. I remember my brother buying a used engine to put into his JD combined harvester, and having to belt start it from a tractor belt pulley in order to obtain the correct rotation. Once woken up from its long slumber, that engine started from its own starter motor and ran perfectly.
@whitesapphire586516 күн бұрын
The video is a mirror, flip it left for right and it all makes sense.
@whataboutbob796716 күн бұрын
Itd be rotating clockwise if viewed from the front where the radiator is.
@Smoked_5L15 күн бұрын
I guess it didn't crank
@tedhicks543114 күн бұрын
Contraten un MECANICO
@JoseLuis-ob8bn17 күн бұрын
it wont start with pto turning holding it back too slow of spin get 1000 pto
Very clever thinking to spin the engine over this way!! Saves batteries, starter, and don't need starting fluid to make it try to start!
Run it with NO fuel and on compression for five minutes, then add fuel. It's cold, it won't start until it's heated. Right at the end, the tractor should have declutched and the engine would have taken off
Pony motors were great.
My father in law sold an engine like this and the people who bought it did this very thing. And it started. The governor was frozen and the engine ran wild, the clutch on the cat engine blew first, shrapnel everywhere. Beware.
This is their first Rodeo for sure.
Good luke
Just subscribed to the channel I want to see the Cat come to life!
Oh man, the video ends right at the "money shot"!! Hope there's a part 2?
Yeah my camera cut out right when it was getting good. I'll post another video of it running soon
Did you end up giving it a little bit of starting fluid that might have helped?
Looks like a sawmill cat
waiting for part 2, i have a big OLD Cummins i start the same way
By indicating its cold use a rosebud burner down the intake in cycles while it being turned over. That'll help unjam the stuck rings enough to start. Also use the clutch on tge engine that's heavier to take the abuse. That lil tractor won't hold up to that.
What’s happened with the stater engine
This how im going to start my dozer from now on lol
Fromcornwall
Old pc diesel probably needs a bit of heat to get it going
Cosby sauce!😫
Amateurs 😂😂😂
IMT 558
Isn’t that the wrong rotation?
Looks backwards to me!
If I'm seeing it right, looks like CCW when looking at the flywheel end. I believe this is correct for many industrial engines.
Unless the tractor has a reversible PTO, then yes, it would seem so. Intuitively, logic would dictate that both the tractor engine/PTO and slave engine should be rotating in the same direction, however, some engine variants are built for opposite rotation. If we look at what appears to be the exhaust stub, we can clearly see that's where the exhaust gasses are coming from. If the engine was turning backwards, any exhaust gasses produced would be issuing from the inlet manifold. I remember my brother buying a used engine to put into his JD combined harvester, and having to belt start it from a tractor belt pulley in order to obtain the correct rotation. Once woken up from its long slumber, that engine started from its own starter motor and ran perfectly.
The video is a mirror, flip it left for right and it all makes sense.
Itd be rotating clockwise if viewed from the front where the radiator is.
I guess it didn't crank
Contraten un MECANICO
it wont start with pto turning holding it back too slow of spin get 1000 pto