How to Build a Carbon Fiber Plane？Process of VTOL Fixed-Wing Drone Construction
2023 ж. 15 Қыр.
1 787 391 Рет қаралды
#drone #vtol #fixedwing
Company Website：www.yangdaonline.com
Email：info@yangdaonline.com
YANGDA manufactures drone gimbal cameras, industry-grade multirotors, and fixed-wing VTOL drones for mapping, SAR, and surveillance applications.
--------------------------
😀 Thank you for watching our video!
❌ This video does not contain paid ads.
📧 Contact: satisfactoryprocess@gmail.com
🎥Copyright(C) 2022. SatisFactory Process. All rights reserved.
Nice Video! I like how it shows a lot of the intermediate fabrication steps. Most consumers don't understand the labor and skill required to make certain products, and this video certainly helps with that.
Products that steal American intellectual property. A land of thieves.
11:34 11:34
12:42 12:43 12:43
12:42 12:43 12:43 12:43
12:47
Just for the irony, I would have loved to see a 20x20 flight controller running AruduPilot, lol. That is a beautiful creation, thank you for sharing the layup to the the flight. Bravo!
I flown this kind of airframe with ardupilot (pixhawk though)
30.5 x 30.5 on the Holybro Kakute F7, and supports both Betaflight and Ardupilot. I have one on an Iflight XL10 running BF, if I want to torture myself again, I'd switch it to Ardupilot and relearn what I've forgotten. Probably won't though. Lol...
これはドローンの制作工程ですね。ホビーではなく兵器としての性能を備えた制作現場の映像は素晴らしいです。
Excellent drone design and manufacturde and flight. This company really knows what its doing, and has some amazing engineers ! Well done!!
These guys take their time and do a good job. I was surprised/impressed to see at all of the Carbon fiber inner structure. The videography and video length is just right for me, more please.
I think that inner structure was needed to mount and secure the electronics and controls systems and perhaps the batteries.
This was a fascinating video and I really appreciate you sharing it. It would be very nice to see the employees wearing quality respirators when painting
Yes, but they have some what decent ventilation vacuum system.
That is a waterfall filtration system. No fumes at the painting area and the water catches the paint overspray.
They're worried about c0vid, not resin fumes 🤣
I sprayed Cellulose coatings on pipe coverings for the petrochemical industry and we used waterfall filters and didn't need a mask, waterfall filtration systems remove 100% of all airborne particles from the air, in this booth all the walls and ceiling are extractors and air is drawn through a waterfall which is the full length of the walls and six foot high, very impressive filters, the paper mask is common in china for everyone to wear all the time, they had a huge problem with TB and the government ordered every school kid, shop worker and public employee etc to wear them in an effort to help eradicate the TB virus,. PS it's a fantastic machine don't you think. . . .
R 2:29 6🎉@
Great video, and build looks like very high quality. Brought back some memories from my earlier days doing RC model aircrafts.
I was wondering if it was going to be a VTOL or just a drone with wings. Was nice to see that they cut the lift motors for forward flight.
Those blue masks look very efficient at stopping small particles from entering their lungs.
I guess they are even more effective than the invisble gloves and the transparent painting garments.
This video was amazing. I really enjoyed watching it. It might be a good idea to make one of these next to my foam planes.
What is the angled scraper/knife your using? I need one like that 😊
Que perfección... Digno de admirar!! ❤
Awesome these guys really know what their doing
thank you; this looks like a "state of the art" shop. Nice to see "natures composite" (the plywood) combined with a thin layer of carbon fiber in a sandwich material! (Now if we could teach trees to grow the intricate shapes that we wanted!) This craft is still performed mostly by hand by skilled people. Gotta appreciate the "sushi chef like skills" that are required to trim the finished pieces after removal from the molds. 15:08 I'd never seen that water bath spray booth process before; but it makes sense that it would be REALLY good for dust/ overspray particulate control. Everyday; the dumpsters are going to be FULL of all of the the high tech consumable materials that are necessary for these processes. Looks like YANGDA and FOXTECH are direct competitors?
I recognize all the actions carried out in the procedure...some even done in a somewhat rough manner although with a satisfactory result..
Wow - fantastic build! And simple but very clever overall design.... I believe we will see many similar designs to this in the near future - with the flying cars that are coming..., Bravo!
i don't think flying cars are coming in the near future. it's not that we can't make them, it's that the idea itself makes no sense when you look into it.
*Excellent man, thank you for sharing your work, God bless you*
Awesome design and superb technology 😊
This was incredible to watch. Looks a very nice bit of kit!
Excellent video. Love that they just run ArduPilot. Now, where can I get one?
Молодці! Гарний результат!
Nice work and excellent craftmanship. Thanks for sharing.
Me encanta¡¡ un video muy demostrativo de la calidad de contruccion de los droenes
Excellent video. Love that they just run ArduPilot. Now, where can I get one?👍👍👍
There's nothing ground breaking or original about anything there, just a bunch of excellent craftsmen who make a well designed vtol. I thought the custom pdb and esc board was cool, using large easy to repair components. Really cool
I like the single pusher prop idea for long loiter flights!
Da hora, magnífico
Teach us Drone Electronics ! So AWESOME DUDE !!! 🙂
Omg its just so easy - the next free 6 weeks I get I'll get started on one!
so good quality. I really like products made from carbon...
Very impressive. Thanks for sharing.
Thanks for sharing. Excellent drone manufacturing video. Now I understand why carbon fiber is expensive because it's labour intensive work.
Parabéns. Isso pra mim é a realização de um sonho. Gostaria de puder conhecer a fábrica
Please provide details on the Telemetry and VTX range
Brilliant guys, thanks.
Супер современные карбоновые технологии полностью базируются на ручном труде и массе отходов производства.
danke, this is a very EDUCATIONAL + THOUGHT PROVOKING VIDEO, nochmal DANKE DANKE DANKE ALLES GUTE
Excellent ! Particularly liked the the fine detail and craftsmanship displayed. Thanks and Regards !
Very nice! As I've already mastered everything else required to build one of these, I now just need a vacuum bagging system. Making the molds is a pain, though. My current method of constructing UAVs is laminating hotwire cut polyurethane foam with fiberglass and epoxy resin.
What kind of UAVs do you build?
@@tyyamnitz8408 ~2m wingspan long-range UAVs for ultra long-range missions. It's mainly for fun, just to take beautuful video and enjoy the views and flying anywhere. It's an incredible feeling of freedom. Designing and building the UAVs and configuring the GCS equipment is half the fun too.
@@abcdefg4570 that is so epic. I’ve started the process of making my own as well because I have all access to my university’s labs and hacker spaces but this will be my first aerospace project so I don’t know where to begin. Do you mind sharing your design process that takes place before you even start with construction? Do you design the uav in OpenVSP or some other software? Or do you just use pen and paper
@@abcdefg4570انا ايضاً اريد التصميم او المخطط وشكرا لك
How can I contact you?
Технику безопасности еще повысить и вообще молодцы.
Хорошая работа, качественная.
thanks so much, you made my day.
Nice production work. However..... not enough glove or proper facemask usage! Different countries and different standards I guess? Handling mixed resin on a daily basis even if just a smear on the fingertips is a bad idea long-term and if there's a tendency for dermatitis it's accelerate it massively! Paint shop had a nice water shield booth but those guys should have had appropriate masks, not just simple covid/surgical ones.
Perhaps the fans are installed not for cooling, but more for ventilation. If the air flow is good, the damage is reduced, but not eliminated.
And now you see why they can make things for less money… (not to mention the much lower wages paid)
@@giuseppe4909 Yes, but that's the way things are. Wages are cheaper in differing parts of the world, but when learnt the skills are as good.
Amazing job
Brilliantly made
Que coisa mais linda!
fantastic work guys! but as someone that has worked a car t bodyrepair and painting, you should really invest in better breading protection. using so little as you do, you will end up with lungproblems after a while. it costs a bit more, but it is better to invest in the good equipment, and stay healthy for longer, this pays of both for the workers, and the company you work for, there will be less days of sick, and the company can keep good workers with special experience for longer.
just what I was thinking, surgical masks arent going to cut it.
Thank you video brilliant compliment
Very well done
Amazing! 😁👍🏁
wow i am giving up making model planes this standard is the best
Great. I only wish there were CAD files and schematic available for download :)
Keep dreaming dude! 😂🎉
Whats the white material that they fill in the molds?
Is a Kit available for purchase? Or otherwise at least a List of electrical avionics hardware required?
just awesome guys!
Excelente acá en Argentina fadea hace el ia-100 Malvinas con estás tecnología. Un avión hecho íntegramente en materiales compuestos. Gracias!!!
In my younger days in the 1970s used to make aircraft parts out of fiberglass. Times have changed.
Video wonderful interesting very very beautiful from Iraq 🇮🇶 I love ♥️ you all the South 🇰🇷 Korean people
Very cool building process video!!! 😊
Nice drone!
I'll take 3! Some slick kit.
Voilà un des futurs des armées modernes.
Superb !!!
how are you smoothing out the thin strip that goes between the two fuselage halves once you put the top on?
nice work
Seeing how these guys are making "commercial" drones, I can't help but wonder what their market is. This ain't no park flier. By the size, materials and technique, this is not a cheap plane by any means. Interesting that it has a defined cargo area. Very interesting and I hope to see these in actual use. Is this a prototype for Amazon ???
How much does the entire factory cost with all its parts ?
this thing is NICE
Awesome!!
Bravo 👍💪 👍💪
Super👍👍👍👍👍
what is the range of this drone from the take off place and air time? and how silent is it? plus the lens on its camera? 200-500mm?
Wow, great job!
Sangat canggih ❤❤
Built my own bait boat in carbon years ago in the half hour tea break with vac bag then autoclave, this model aircraft is easy
Excelente 👏👏👏👏
gr8 drone!
when they put the carbon frame into the matrix, what did they fill the internal space with? to form the wings themselves?
Very nice. Good video. Just one thing ... a little better extraction and masks in the paint booth - your lungs will thank you.
멋집니다.
Would be cool to have the "lift" propellors rotate forwards to contribute to the thrust in forward flight rather than just have them be dead weight and extra drag.
Yes thats the ideal design configuration and then you dont need the tail pusher propeller. There are drones that do this already!
It's about complexity. You can have a tilt motor mechanism, but it adds a lot of weight and many moving parts. Also, you would probably need a variable pitch propeller to account for the differences in air velocity between hover and cruise, which again adds more weight and complexity. I agree that, tilt-wings in particular, are the most elegant solution, but they are very difficult to get right.
Below X size, the mass penalty for this is probably lower.
Fixed vertical motor is far more simple and reliable too
@@KevinATJumpWorks Why variable propeller pitch?!?! The force is regulated by engine speed. This is not an internal combustion engine, electric motors perfectly and quickly control the speed of revolutions.
thats awesome
Excelente equipo
Professional construction. What is in the piping bags? Gelcoat? Or PVA glue?
good work !
Is that PU primer on the mold, before layup of the fabric? How does that even work?
Excellent video ❤❤❤❤
is there a full size project? sounds like is possible
做的非常不错
EXCELLENT
I was absolutely astounded by the craftsmanship of the workers. Applying beads of glue as if from an industrial robot.
"You are very smart, I like your work."
Best vidéo, please send for 🇺🇦 ♥️
Well done!
Me sorprende un tanto que no usen fibra de carbono preimpregnada. Resulta muy cómoda de usar.
Хорошая работа 😊. Технику безопасности соблюдайте хоть иногда=_)
Parabéns.
The vtx is huge! Like 10w????
This video is greatly appreciated It has inspired me to do more as I never considered using my laser to cut air frame components or the tools so they can be made from hydro formed aluminum or vacuum formed ABS or Carbon fiber tow. I have never considered using a heater in a closet or closed off room as an oven to speed up curing. 😅 Brilliant. Well done.
I have used a heater in a closed off room before, but only in relation to sugar fermentation and plants ;) What is sorely lacking in this workshop is a spot ventilation system and proper breathing protection. Those guys are going to lose half of their brain cells before they hit 40.
In Germany we call it "Hobby" ( and we love to say ) sounds strange but it is true!