KZhead
Тәжірибелік нұсқаулар және стиль

Star Wars Rogue One Shore Trooper Helmet (3d printed)

I Like To Make Stuff
2024 ж. 15 Мам.
2 210 709 Рет қаралды
Жүктеу

I 3D printed a Shore Trooper helmet from Star Wars Rogue One!
Check out how I did it!
TOOLS LIST:
(some are better than the versions I own)
amzn.to/2akFubx - Orbital Sander
amzn.to/2ay8ICl - Dremel tool
amzn.to/2ay9XRX - CA Glue (medium)
amzn.to/2ay9T4v - CA Activator
amzn.to/2hrl6Wj - Air brush with compressor (mine is Harbor Freight)
amzn.to/2hnwja9 - Bondo glazing putty (good for small spots & seams)
amzn.to/2hmAtlz - Bondo body filler
amzn.to/2hnv4Yt - Bondo spreaders
amzn.to/2hrfrj0 - 3M Flexible sand paper (150 grit)
amzn.to/2hnBiaM - 3M Flexible sanding sponge (220 grit)
amzn.to/2hKh765 - Pin stripe masking tape (0.25")
amzn.to/2axPtbL - Silhouette Portrait (vinyl cutter)
www.matterhackers.com/store/p... - Ultimaker 2 Extended 3D printer
www.matterhackers.com/store/p... - Ultimaker 2 extrusion upgrade kit
www.matterhackers.com/?rcode=... - All filaments, 3d printing supplies from MatterHackers
amzn.to/2al6w2q - Heat Gun
amzn.to/2aovz06 - Respirator
amzn.to/2aW3nHn - Filters
amzn.to/2aY182W - Eye protection
Subscribe: bit.ly/ILikeToMakestuffSubscribe
Check out my TopVideos!: bit.ly/ILikeToMakeStuffTopVideos
Learn 3d modeling, get digital plans, and cool merch at
iliketomakestuff.com
Want to support ILTMS? Get exclusive content and more...
www.iliketomakestuff.com/patreon
FOLLOW:
/ iliketomakestuff
/ iliketomakestuff
/ iltms
#ILikeToMakeStuff
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
Star Wars Rogue One Shore Trooper Helmet (3d printed) // How-To | I Like To Make Stuff
• Star Wars Rogue One Sh...
I Like To Make Stuff
/ iliketomakestuff

Пікірлер

  • Finished my exams. had not seen any star wars yet!! Download all 7 episode to watch and get ready for rogue one. yeah!!!😉

    @KicstarV@KicstarV7 жыл бұрын

    • Kicstar V watch Rogue One first, and then watch the other episode. you will get it.

      @monophonoise4548@monophonoise45487 жыл бұрын

    • Kicstar V Enjoy it!

      @MW3TIM@MW3TIM7 жыл бұрын

    • Kicstar V you should watch it in the order: episode 1,2,3,rogue one, 4,5,6,7

      @femkevdw8369@femkevdw83697 жыл бұрын

    • Event Horizon thats not the chronological order of the story though it should be 123 (origin or Darth Vader and everything), rogue one (they get the blue prints), 456 (rebellion after they get the blueprints), 7 (and 89 coming out later)

      @femkevdw8369@femkevdw83697 жыл бұрын

    • Event Horizon I see where you get it from, but i always prefer the chronological order

      @femkevdw8369@femkevdw83697 жыл бұрын

  • this is actually really good and one of my favorite things that i've seen 3d printed

    @nerd_world8919@nerd_world89196 жыл бұрын

  • The assembly of the 3d printed parts is so satisfying to watch. Awesome job!

    @Sullendust@Sullendust6 жыл бұрын

  • Holy smokes! That's amazing. Your work is inspring.

    @caitlinV3@caitlinV37 жыл бұрын

  • Absolutely wonderful!!! The project, process, video, and your enthusiasm, all inspiring and a pleasure to watch!

    @Artismia@Artismia7 жыл бұрын

  • If I owned something like that I'd never take it off

    @taxavoider9889@taxavoider98897 жыл бұрын

    • I end up getting the helmet all smelly due to bad breath -.- So, I think IF I make something it'll be a rebel helmet. Like on endor. So it wont cover my face and such.

      @lovebirdmic@lovebirdmic5 жыл бұрын

    • lovebird mic Brush your teeth, are you a caveman?

      @proseiben3358@proseiben33584 жыл бұрын

    • Trust me, you will hahaha

      @samuelmayr9796@samuelmayr97964 жыл бұрын

    • This is the way

      @Daidalos69@Daidalos694 жыл бұрын

    • this is the way!

      @ziospoletta7482@ziospoletta74824 жыл бұрын

  • That is a beautiful helmet, and when you put it on the voice changes and that makes it even cooler! I would love to have one of those! Keep up the good work 👍

    @that1guy839@that1guy8397 жыл бұрын

  • What a great video. I love stuff like this, and this video was the absolute perfect balance of how it was done and showing how it was done. Epic stuff.

    @ian9outof10@ian9outof107 жыл бұрын

  • Wow !!

    @jimmydiresta@jimmydiresta7 жыл бұрын

    • Wow Also! BTW Seen it... It's Awesome!

      @davestrain1762@davestrain17627 жыл бұрын

    • Hi diresta :D I love your vids

      @Aubble@Aubble7 жыл бұрын

    • W OMEGALUL W

      @beautifulbeaner@beautifulbeaner3 жыл бұрын

  • Favorite project that you ever made: confirmed.

    @JayBates@JayBates7 жыл бұрын

    • :)

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

  • The dark edging gives it a Borderlands vibe! Great work.

    @ThePowerchimp@ThePowerchimp4 жыл бұрын

  • I loved the this trooper's helmet model way more than any others before

    @domonator5000@domonator50005 жыл бұрын

  • Bob that helmet looks great! I especially like how you gave it a used/distressed look. I think if you were to make all of the rest body armor, I would love to see the video/s. Thanks for sharing

    @69virgin1966@69virgin19667 жыл бұрын

  • This video and your helmet are the best things ever. I have a 3D printer that I have not been using to its full potential and you inspire me to be a better maker!

    @ilovenarwhalies@ilovenarwhalies7 жыл бұрын

    • That's awesome to hear, thank you!!

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • boi wat u doing in ur life 3d printer is a thing that i always wanted in my life.

      @imperialrecker7111@imperialrecker71116 жыл бұрын

  • I’ve been assembling a Scout Trooper helmet for the past few months and I’ve learned so much on what NOT to do. This really helped to learn

    @floopusdoopus@floopusdoopus Жыл бұрын

  • That scarif trooper helmet looks really cool and I wished I can things like that, so cool.

    @kevingreenfield8285@kevingreenfield82855 жыл бұрын

  • Rogue one was by far one of the best movies I had ever seen, and I love the helmet, maybe you should try other Star Wars helmets? Like Captain Rexs' helmet, or a shadow trooper hemet

    @arcticfoam5480@arcticfoam54807 жыл бұрын

  • This is awesome man. I just found your channel and I love it! Keep it up man!

    @corywildasin5705@corywildasin57056 жыл бұрын

  • What an amazing job! Impressive work man!

    @AgustinSevilla@AgustinSevilla7 жыл бұрын

  • This is awesome Bob!!! I love star wars and think that your love for making stuff and star wars is fantastic! This is one of the best helmets I’ve seen! And great job on the painting

    @HaraldDeathwolf@HaraldDeathwolf5 жыл бұрын

  • Fellow propmaker here, this is one of the best projects I've seen you do yet. You're really tempting me to finally get around to upping my CAD skills. I'm seeing a lot of advantages of doing a print over molding and casting a sculpt; especially for one-off props.

    @verdatum@verdatum7 жыл бұрын

    • And of course you could stop at an earlier point and mold and cast if you didn't want to go through printing and cleaning it up. Also give you chance to use a superior material.

      @AnimeWars2002@AnimeWars20027 жыл бұрын

    • verdatum If your a prop maker...... I'd like a Samus helmet master chief helmet soldier 76 gloves jacket and face mask Boba and mango fett helmet along with a pilot helmet from Titan fall.Whats the total cost?

      @lil_vault_boy4201@lil_vault_boy42017 жыл бұрын

    • I LOVE YOU Personally, I don't do sewing projects like the Soldier jacket; I'd outsource that. I have no idea who "Mango fett" is, so I'm leaving that out. Depending on the design, there's a very good chance you'll be blind while wearing the Titanfall helmet. Presuming you want Hollywood-film quality dead-on realism, I'd give a ballpark estimate of about $30k, not including licensing issues, of course.

      @verdatum@verdatum7 жыл бұрын

    • verdatum Lmao I put "mangofett" .Nah but it was a joke.But if I wear to try and get these I wouldn't go for dead on realism.Going for dead on realism would be too pricey and unneeded.Instead a simple version of it with out the colors would be fine enough as any body can get tape and spray paint the object.I find it kind of funny that you took this as a order.Although I do like the fact that you were very professional in terms of responding to my comment.

      @lil_vault_boy4201@lil_vault_boy42017 жыл бұрын

  • I´m very interested to do this in my free time when I am older... I just dream of a Death Trooper costume in a quality like this xD

    @hievenhade7545@hievenhade75457 жыл бұрын

    • i will remind you...

      @notreal8699@notreal86994 жыл бұрын

    • There your older now

      @wiyao8164@wiyao81644 жыл бұрын

    • You also might like a Captain Rex's Storm trooper armor set. Captain Rex was an original and is very good with blasters, mini guns, etc. He was also one of Jedi Anakin's Trainers before he switched sides and became darthvader and then get absolutely obliterated.

      @Nakamax.@Nakamax.4 жыл бұрын

  • Rogue One was an amazing star wars addition Great Job !

    @waldvogelreview7755@waldvogelreview77556 жыл бұрын

  • Good stuff.. Awesome how you go through each step in making this work of art. Rogue One is the best SW movie yet!

    @johanderuiter9842@johanderuiter98426 жыл бұрын

  • Nice! You should do the "Mandolarion Helmut as well.

    @michaelkerr9682@michaelkerr96824 жыл бұрын

    • That's some damn good spelling right there

      @RowdyBrian17@RowdyBrian174 жыл бұрын

    • i agree

      @yeboy6020@yeboy60204 жыл бұрын

    • @@RowdyBrian17 username checks out

      @General4nubis@General4nubis4 жыл бұрын

    • There is a build in KZhead that’s really good

      @crappiegamer2341@crappiegamer23414 жыл бұрын

    • @@crappiegamer2341 what is it of?

      @yeboy6020@yeboy60204 жыл бұрын

  • Bob...That's badass. Amazing work!! Great job!!

    @mdbohica@mdbohica7 жыл бұрын

    • Thanks Josh!

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

  • Hey bob. Love watching your videos and have me the inspiration to finally set up my own workshop! Currently have this shoretrooper printed just for the sanding and filling!

    @thesecretworkshoppropscust7215@thesecretworkshoppropscust72157 жыл бұрын

  • Nice job!!! I just got a 3d printer and am going over different SW helmets to figure out which one I want to make first. Nice process and it looks awesome.

    @robredfeather8731@robredfeather87315 жыл бұрын

  • Yes! Armour would be fantastic!

    @fatbrian9458@fatbrian94587 жыл бұрын

  • Bob this might sound weird but you should drop it or scratch it a little bit. To give it that extra touch!

    @YoureASquidYoureAKid@YoureASquidYoureAKid7 жыл бұрын

    • lol that does sound weird but thats a good idea

      @brooks1052@brooks10527 жыл бұрын

    • unsure of how the 3d printed material holds up, but i did the exact thing to weather my fiberglassed Boba Fett helmet. smacked it against some concrete block, rubbed charcoal all over it. Turned out real nice. The best way to get that "real weathered" look is to paint a silver and black as the base layer so when you chip off your actual top color, it has that very minute depth to it that makes it more realistic up close. I tried putting the silver and black on over top my top color and it looked exactly like i did that hahah

      @JordanCataldo65@JordanCataldo656 жыл бұрын

  • my son is a big fan of star wars and he loved this project...thanks for sharing

    @PabloColazurdo@PabloColazurdo6 жыл бұрын

  • kudos to you! Great video and wow I'm blown away at the quality, definite passion project. Thanks for sharing it!

    @MrJWalton2009@MrJWalton20097 жыл бұрын

  • Pro tip if you want correct colours ... 99% use ww2 German RlM colours of the Luftwaffe and panzer divisions , all the empires colours are based on this , since rouge one is empire cannot go wrong

    @vasili1207@vasili12077 жыл бұрын

    • The official color is Sahara Beige

      @lmcriminals@lmcriminals5 жыл бұрын

  • Sweeet video, super cool. So close to 1M subs. Great work Bob.

    @PeterOConnl@PeterOConnl7 жыл бұрын

  • The imperfections are what make it perfect!

    @dimplybucket@dimplybucket7 жыл бұрын

  • I think I had a smile on my face the entire time I watched this. Fantastic job, Bob!

    @RyanTerry@RyanTerry7 жыл бұрын

    • Thanks man :)

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

  • This is great!! I'd love to see you do more of these. Maybe the Death Trooper or Boba Fett!

    @jamesbarrett1614@jamesbarrett16147 жыл бұрын

    • I probably will at some point, as long as I can make sure that the videos offer some new info for people to learn. Thanks!

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

  • I'm not a big Star Wars fan, but this looks really good!

    @NitrousDiecast@NitrousDiecast7 жыл бұрын

    • Hotwheels Dd same lol

      @abnormaalz@abnormaalz7 жыл бұрын

    • Hotwheels Dd same..

      @Shrew-22O1@Shrew-22O17 жыл бұрын

  • Excellent build - watched to the end. Thanks for sharing. Looked great after weathering...

    @AtomkeySinclair@AtomkeySinclair6 жыл бұрын

  • This is a reminder that you wanted to make the whole armor. I'd love to see you make it.

    @acledfloyd@acledfloyd6 жыл бұрын

  • Great job, Bob! I'll be going to see the movie this Sunday!

    @SenorEscaso@SenorEscaso7 жыл бұрын

    • SenorMateo I saw it yesterday and it was amazing (it really cleared up some stuff that was unclear in the original triology from the 70s)

      @femkevdw8369@femkevdw83697 жыл бұрын

    • i liked the way it explained the 2 meter wide exhaust port XD, now it all makes sense.

      @blabswell3308@blabswell33087 жыл бұрын

  • pleas make the armor it would be so cool

    @zwartepjotr2865@zwartepjotr28657 жыл бұрын

    • zwartepeter69 that would take ages

      @femkevdw8369@femkevdw83697 жыл бұрын

    • zwartepeter69 it would take 2 years with 1 printer

      @EctoGamer@EctoGamer7 жыл бұрын

  • Damn the empire needs to hire you! that looked super cool!

    @unhandydaddy5117@unhandydaddy51177 жыл бұрын

  • Wow that looks amazing and very time consuming. Good job and I wanted to recommend placing window tint or any kind of film with adhesive on the direct middle of the piece you are trying to cover. It will help remove all of the air bubbles due to the middle pushing air outward.

    @brendonwheeler2853@brendonwheeler28536 жыл бұрын

  • if I just had a 3d printer.....

    @TheBenjaman@TheBenjaman7 жыл бұрын

    • you can still do helmets out of foam! There's a very good explanation on these on Tested :D

      @Lellba47@Lellba477 жыл бұрын

    • Lellba47 yeah I know, i've seen some amazinf foam helmets and stuff

      @TheBenjaman@TheBenjaman7 жыл бұрын

    • If youre looking for a cheap printer, try the anet a8 from GearBest. it's 150 bucks and ships worldwide.

      @jabbahammahummus2887@jabbahammahummus28877 жыл бұрын

    • Look into the Anet A8, cheap printer that brings surprising results.

      @Videogametourist@Videogametourist7 жыл бұрын

    • That's surely not big enough to make a helmet of this size though right

      @jasenwills590@jasenwills5907 жыл бұрын

  • Dude, that turned out AMAZING. Gonna wear it to the theater?

    @craftedworkshop@craftedworkshop7 жыл бұрын

    • Thanks man! I just might ;)

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • I Like To Make Stuff you better! Seriously man, that is some incredible work. I really need to dig into learning Fusion.

      @craftedworkshop@craftedworkshop7 жыл бұрын

  • It looks REALLY clean!

    @nolaehan922@nolaehan9226 жыл бұрын

  • I remember when I stumbled upon this channel when it had somewhere around 300k subs a few months back, now he has over a million! Good job!

    @WhundersAlternate@WhundersAlternate7 жыл бұрын

  • Dude! That's crazy awesome!

    @MakeSomething@MakeSomething7 жыл бұрын

    • Thanks man!

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

  • Rogue One spoiler: PEWPEWPEWPEW BOOM! POW *robot noises*

    @DaedalusProps@DaedalusProps7 жыл бұрын

    • Awww man.. you gave away the ending!!!! ;)

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • I Like To Make Stuff i'm a bastard like that LOL By the way, love the channel. I saw the life casting videos that you did with Bill, he's pretty great LOL

      @DaedalusProps@DaedalusProps7 жыл бұрын

    • @I Like To Make Stuff lol 😂 I never saw it cuz I don’t like StarWars hehe

      @HelloKitty-sd9vs@HelloKitty-sd9vs5 жыл бұрын

  • You are such a talented modelist! I feel like they should have used this in the film.😊

    @jasper_fb7273@jasper_fb72736 жыл бұрын

  • whats great is that it doesnt have to be screen accurate at this point. its your variant now and you can add your own embellishments to the armor. Great Job, totally inspired me to make one. I dont have a 3d printer but i have a heat gun, a few 3L soda bottles, spray paint and a few hours to kill im sure i can knock something out.

    @InsufficientFare@InsufficientFare7 жыл бұрын

  • The question is: Can you aim with it?

    @aarontena@aarontena7 жыл бұрын

    • of course not are you mad

      @boonkiousgangulous8221@boonkiousgangulous82217 жыл бұрын

    • Oh I thought you could. That would have broken the laws of the universe.

      @aarontena@aarontena7 жыл бұрын

    • I don't think it would be good sights for a weapon.

      @blueawesomedinosaur@blueawesomedinosaur5 жыл бұрын

    • No

      @edwinng4610@edwinng46105 жыл бұрын

    • Well… shore troopers in rogue one had a pretty good aim

      @EmperorKlaus7068@EmperorKlaus70682 жыл бұрын

  • Absolutely awesome.

    @AndrewSetters@AndrewSetters7 жыл бұрын

    • Thanks dude :)

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

  • I've found that a cheap marble tile or pastry board has an incredibly smooth an rigid surface for sanding. Use some rubber cement on both the sand paper and marble. Let dry then stick together. Great to doing edge joining of small parts... also works awesome for sharpening chisels with a jig.

    @BarranteMotion@BarranteMotion7 жыл бұрын

  • Super impressed mate! Well done 👍🏻

    @thomaswright968@thomaswright9686 жыл бұрын

  • Leave it in the desert for a few weeks to weather it even more haha

    @JHA854@JHA8547 жыл бұрын

    • practical effects taken to the next level

      @rakdos91@rakdos917 жыл бұрын

    • dude that haha in you sentence is super poor

      @torbenfickerich9745@torbenfickerich97456 жыл бұрын

    • f**k. u

      @chelsieelder7473@chelsieelder74736 жыл бұрын

    • Chelsie Elder fuck you too

      @panther2906@panther29065 жыл бұрын

  • Man, this is amazing. Technology is leaving me trailing. I'd love to get into all this but my brain just won't learn computers.

    @justliam2768@justliam27687 жыл бұрын

  • i really like how true ARTIST do their JOBS; perfectionist

    @NERO-ez1mn@NERO-ez1mn5 жыл бұрын

  • This is great. Super well spoken & a ton of useful information. Thank you!

    @hempstead.studio@hempstead.studio7 жыл бұрын

  • "Great shot kid, that was one in a million!"

    @Rouverius@Rouverius7 жыл бұрын

  • Get ready to go viral!

    @emotisean@emotisean7 жыл бұрын

  • This. Is. Awesome!!! You even sound like a real stormtrooper when you put it on!

    @SteveSenar@SteveSenar6 жыл бұрын

  • Very very cool project. Nice work!

    @DIYGene@DIYGene5 жыл бұрын

  • Spoiler alert: that one guy does that one thing

    @benjamincole4716@benjamincole47167 жыл бұрын

    • NOOO THE ENTIRE FILM'S RUINED NOW!!! HOW COULD YOU?

      @sspoon@sspoon7 жыл бұрын

    • Benjamin Cole When Vader decapitated the main characters?

      @AbeTheRock@AbeTheRock7 жыл бұрын

    • Abe The Rock and when all the main characters died getting the plans?

      @planbskater19roblox27@planbskater19roblox277 жыл бұрын

    • planbskater19 ROBLOX Delete your channel.

      @christianoh98@christianoh987 жыл бұрын

    • christianoh98 lol no kid

      @planbskater19roblox27@planbskater19roblox277 жыл бұрын

  • I've always been on the jedi's side, After watching this I think I want to be a storm trooper now! xD

    @z6n387@z6n3876 жыл бұрын

  • That's an AWESOME job dude!

    @StonerEyes420@StonerEyes4207 жыл бұрын

  • Wow that's amazing. Well done!

    @AndrewArsenal@AndrewArsenal6 жыл бұрын

  • man thanks I love star wars

    @florentsaliu9414@florentsaliu94147 жыл бұрын

    • me too!

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • Nice I can't wait till the new one comes out!! Are you excited ?

      @florentsaliu9414@florentsaliu94147 жыл бұрын

    • Florent Saliu of course!

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • Nice man !! 👍

      @florentsaliu9414@florentsaliu94147 жыл бұрын

    • I Like To Make Stuff hi

      @judasruiz3908@judasruiz39087 жыл бұрын

  • "RKGIENFJEJFMEKDKE" (We need a Death Trooper helmet!)

    @lachieclements6859@lachieclements68597 жыл бұрын

    • yeeeeeeeeeeeeeto

      @loop5720@loop57204 жыл бұрын

  • This is absolutely amazing good job man!

    @anonymousr1918@anonymousr19184 жыл бұрын

  • Hardwork pays off, looks great!

    @chandlerwilliams4415@chandlerwilliams44155 жыл бұрын

  • *Spoiler alert* Han Solo dies. Errr, no. I mean. Chewbacca loses hair and a ball of it gets stuck in his throat and eventually dies.

    @ShareTN@ShareTN7 жыл бұрын

    • Wrong, leia is revealed as Chewie's grandmother and is killed by the shock. You clearly haven't seen the movie, so don't act like you're smart.

      @Packhuffer@Packhuffer7 жыл бұрын

    • Sir Skeletor I've seen all nine movies and the story goes like this. The whole series is just a dream of Chewbacca during a long journey in the Millennium Hawk. :P

      @ShareTN@ShareTN7 жыл бұрын

    • ShareTN False, there are 11 movies and they are all dreams of Chewbacca but the 10th one it is revealed that Jar Jar Binks is snoke and Ham Solo is killed by his son, jar jar banks.

      @Packhuffer@Packhuffer7 жыл бұрын

    • Sir Skeletor hahaha. I'm waiting for the 12th to come out. They say C3PO and R2D2 finally make it to the third base.

      @ShareTN@ShareTN7 жыл бұрын

    • ShareTN Wait, wtf.

      @Packhuffer@Packhuffer7 жыл бұрын

  • You realy should make the rest of the armor. After that put it on a dummy and put it in a corner :O :D

    @Insane98@Insane987 жыл бұрын

    • Great idea

      @Jeroen_93@Jeroen_937 жыл бұрын

    • Dennis And it would take ages to make

      @hugopohlak5831@hugopohlak58317 жыл бұрын

    • Work that into the Star Wars Nativity Scene.

      @doubledarefan@doubledarefan7 жыл бұрын

    • yesh eyshhsheyadsadaseeeeeeeya

      @squigglylines420@squigglylines4207 жыл бұрын

  • May not be a 100% screen accurate, but that helmet is WICKED AWESOME! Love it man!

    @moviereviews541@moviereviews5414 жыл бұрын

  • Make a shoretrooper gun!!

    @Joran2004@Joran20047 жыл бұрын

    • It's actually on the printer right now (not my model, one that someone sent me) I'll probably be building it on my Twitch live stream over the coming weeks. www.twitch.tv/iliketomakestuff

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • I Like To Make Stuff okay nice👌

      @Joran2004@Joran20047 жыл бұрын

    • Joran It has a name u know I think it's called E-something

      @theinfernostud6226@theinfernostud62266 жыл бұрын

    • Lil Jo-Jo Great idea 😇👍🏼

      @pfcthomasw.9394@pfcthomasw.93944 жыл бұрын

  • Bob help, I made the helmet and now I can't find the tools I'm looking for.

    @Bretts_Builds@Bretts_Builds7 жыл бұрын

  • That's about as awesome as awesome gets. Excellent job.

    @royg1908@royg19086 жыл бұрын

  • Really great job man, thanks for making the video so we could see it.

    @Warhawk76@Warhawk766 жыл бұрын

  • I'm a Star Wars nerd to or fan

    @darbcha@darbcha7 жыл бұрын

  • Can you make one without a 3D printer? I don't have one :(

    @brandino4466@brandino44667 жыл бұрын

    • Some people have done it with EVA foam floormats.

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • I Like To Make Stuff Are there any videos of that? I really want to make one

      @brandino4466@brandino44667 жыл бұрын

    • Death Star productions don't know if this helmet in eva specifically, but check out my Batman helmet video to see the process. Also, check out everything from Punished Props.

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • I Like To Make Stuff is there a template? Or do the have a tutorial how to make it

      @brandino4466@brandino44667 жыл бұрын

    • Death Star productions My local library has a 3D printer that anyone can use. Check for similar resources in your town, such as high schools or park districts.

      @VAULT-TEC_INC.@VAULT-TEC_INC.7 жыл бұрын

  • Shoretroopers are my favorite so thanks for making this video

    @whokilledfr.@whokilledfr.6 жыл бұрын

  • Wow so much time and hard work you put in , thank you for sharing

    @hienthinh2879@hienthinh28795 жыл бұрын

  • Spoiler:Your awesome dude

    @Gemini_Luv23@Gemini_Luv237 жыл бұрын

    • I SAID NO SPOILERS!!!! oh.. thank you :)

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

  • 3:39 huge

    @AlexDestaK@AlexDestaK7 жыл бұрын

    • So big.....

      @loop5720@loop57204 жыл бұрын

    • *That's what both of the opposite males said*

      @loop5720@loop57204 жыл бұрын

  • So cool! Not really a fan of StarWars but I really like it. Like the “rust, dirt, scratches” lol

    @HelloKitty-sd9vs@HelloKitty-sd9vs5 жыл бұрын

  • Great job man. Such patience

    @CarlosMorales-wk5bg@CarlosMorales-wk5bg5 жыл бұрын

  • When will you make a he man sword

    @yaboijjonah._.1815@yaboijjonah._.18157 жыл бұрын

    • I made it on my live streams on Twitch a while back. www.twitch.tv/iliketomakestuff

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • I Like To Make Stuff is there a way to rewatch that stream

      @yaboijjonah._.1815@yaboijjonah._.18157 жыл бұрын

    • Robby Collins They stay on Twitch for a little while but fall away after a certain amount of time. Unfortunately that one is gone by now :/

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • I Like To Make Stuff aww man I was really looking forward to making a he man sword

      @yaboijjonah._.1815@yaboijjonah._.18157 жыл бұрын

    • I like it can you make me some clone trooper armor? I would love it.

      @danielmaloney128@danielmaloney1287 жыл бұрын

  • can I have that?

    @kackmann4016@kackmann40166 жыл бұрын

  • You did a fantastic job. Man oh man.

    @rickytoddbotelho9555@rickytoddbotelho95556 жыл бұрын

  • this turned out wonderfully! a few things you may want to consider in the future: when bonding with CA glue or 5 min. epoxy, you should really consider sanding away the paint and primer in the areas to be joined. you may find in a few years, that the visor may just fall off as it stands now. same thing applies for plexiglass. the areas to be bonded, should have been roughed up just a bit (though this is less of an issue, as it wasn't painted or primed). i'm sure another may have already mentioned this- but plexi is available in multiple shades of black, with varying degrees of opacity. next time you could save a bit of hassle with that window tint. the only other thing i can think of that's worth it's weight in gold for projects like this, is the red bondo spot putty, during the sanding/seaming/refining stages. just apply it right outta the tube (no hardener required). it dries rapidly and sands like a dream. perfect for smaller areas when mixing and using standard bondo would be so much more hassle. once again- great job and keep up the fantastic work!

    @youmintubes@youmintubes7 жыл бұрын

  • It's Scarif Trooper.

    @ParkRanger2000@ParkRanger20007 жыл бұрын

    • No. Scarif is a planet. They're called shore troopers. www.starwars.com/databank/shoretroopers

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • The Rebellion I've only seen them called that by people who don't know that they're called ShoreTroopers.

      @Iliketomakestuff@Iliketomakestuff7 жыл бұрын

    • +I Like To Make Stuff Hey, I'm just saying they're called by a different name. You can call them what you want to call them.

      @ParkRanger2000@ParkRanger20007 жыл бұрын

    • Star Wars Battlefront calls them Shoretroopers buddy.

      @vcrazy_diamond@vcrazy_diamond7 жыл бұрын

    • Ok, but they're called "Scarif Troopers", too.

      @ParkRanger2000@ParkRanger20007 жыл бұрын

  • a good trick with bondo is drop some of the puddy stuff down, then put a small bead of the activader through the middle. This will result in a almost perfect mixture every time. Hope this was helpful.

    @damianflaig5594@damianflaig55944 жыл бұрын

  • Incredible build! Have to say, very jealous.

    @EclipseandSun@EclipseandSun7 жыл бұрын

  • Great job on the trooper helmet I was at the Aussie Supernova on the weekend and was talking to a lady in amazement who 3 D printer her entire Cpt Phasma cosplay costume very impressive and well worth the effort hey Good video

    @5mepo5@5mepo56 жыл бұрын

  • Lots of work, but awesome. You're an artist, great job.

    @stephenmcbride6359@stephenmcbride63597 жыл бұрын

  • I saw a great trick for weathering from Frank Ippolito where you first lay down a silver coat and apply some toothpaste to it so that it looks like it is scratched. Than you go over the whole thing with your main color and when it is set you can just simply wipe the toothpaste away and you are left with awesome scratches.

    @RandomFilmmaker@RandomFilmmaker6 жыл бұрын

  • I still think that this is one of your best projects.

    @markhensens5989@markhensens59896 жыл бұрын

  • That's pretty incredible.

    @allluckyseven@allluckyseven6 жыл бұрын
KZhead