KZhead
Ғылым және технология

How to build a hand made bicycle frame with basic tools with YOSEPOWER Conversion Kit

The Metalist
2023 ж. 16 Жел.
325 157 Рет қаралды
Жүктеу

E-bike conversion kit: yosepower.com/?ref=oz4ic9iu
save 10€ with the code: Metalist
I used to often handmade build bicycles. But those were very eye-catching bikes, “beach cruisers”. The last one was probably 12 years ago. Back then I wanted to build a bicycle frame made of polished stainless steel. Although stainless steel is not the best material for a bicycle frame. Now it turned out that it had worked. It was an e-bike, I thought it would be more complicated, especially with the wiring, but it was really plug and play. The polishing was actually the most complex part of the construction. Next time I would choose larger pipes and put all the cable stuff in the frame. But the whole construction was a lot of fun.
Buildplans from my projects: www.etsy.com/de/shop/Madebyth...
Friends and Sponsors from my Channel:
ESAB Welding and cutting @esab esab.com
Kemper Welding Fume extractions: www.kemper.eu/en
Stepcraft CNC: @stepcr shop.stepcraft-systems.com/Home

Пікірлер

  • Your use of basic tools and few jigs makes this project look really approachable. I’ve seen so many frame building videos that make it look more difficult than it is. Thanks for that!

    @Jer_Schmidt@Jer_Schmidt4 ай бұрын

    • basic tools lol😂

      @runningdoctor@runningdoctor3 ай бұрын

    • They are fairly basic. We’re you expecting him to use a home repair kit and tape?

      @spudluver47@spudluver472 ай бұрын

  • Immer wieder ein Genuss, dir beim arbeiten zu zuschauen 🎉

    @762Schlosserbande@762Schlosserbande4 ай бұрын

  • It's not just a basic tool you got the skill of making it perfect frame of the bike.

    @spalcantara3@spalcantara34 ай бұрын

  • Boy, the best video on KZhead! 👏🏻👏🏻👏🏻...

    @danielnascimento6945@danielnascimento69459 күн бұрын

  • Tig weld, special table for welding, 4 different grinding machines, hydraulic press. Yes, its exactly basic tools...

    @paulivanov9280@paulivanov92804 ай бұрын

    • click-bait it is 😂

      @peterkubistel8111@peterkubistel81114 ай бұрын

    • 30 seconds into the video and I'm like darn, I have none of those tools. But I guess this is basic for metal working shop.

      @infiniteoffset@infiniteoffset4 ай бұрын

    • All these keyboard warriors who all made their last bike frame with two hand files, some emery-cloth and a paraffin blow lamp. Sheesh! Give the man credit… he built most of his own tools, welding table etc. on which he constructed this frame. I wouldn’t want to ride anything that heavy, but… give the man credit, for goodness sake.

      @leslieaustin151@leslieaustin1514 ай бұрын

    • Go find a video of a bike frame being built by a professional. You will find lots of specialized tools. These are all basic tools you will find in any metal shop.

      @MattnUska@MattnUska4 ай бұрын

    • Yeah plus argon gas etc. This title video title is bs.

      @user-tq3ud9zi7w@user-tq3ud9zi7w4 ай бұрын

  • Awesome as always! Love your work and always inspiring solutions - your channel and ToT are my favorites - Cheers mate

    @johneggleston@johneggleston5 ай бұрын

    • Thank you....awesome 😊💪

      @TheMetalist@TheMetalist5 ай бұрын

  • Liking the hone made stand for the magnetic drill press, great idea 💡

    @PASKEN458@PASKEN4583 ай бұрын

  • Excellent work! Loved all the practical solutions. 👏🍻

    @PithyBikes@PithyBikes4 ай бұрын

  • Another Genius Build!!! Nice work Dirk! 👏 👍👍

    @silvergrizzly316@silvergrizzly3165 ай бұрын

    • Thank you 😊

      @TheMetalist@TheMetalist5 ай бұрын

  • Absolut krasses Video Dirk ,hätte ich nicht gedacht das Du auch mal ein E-Bike baust .Großen Respekt für dein vielseitiges Talent! Grüße Marko

    @markoheimburger9895@markoheimburger98955 ай бұрын

    • Vielen Dank 😊 Ja moment nicht das beste Wetter aber war schon länger mal geplant 😉 Grüße Dirk

      @TheMetalist@TheMetalist5 ай бұрын

    • Hallo, habe eins aus Stahl gebaut und hätte es gerne nochmal in Alu. Grüße

      @user-tb6cg6qt7p@user-tb6cg6qt7pАй бұрын

  • Pure Joy to watch! What a craftsman you're just to build your own bike like this. Flabberghasted how easy it looks. A bridge too far for me but so learnsome in all the details from which we may destillate features which helps us tremendously to build our own projects. Masterly!!!😀💯💪🚴🚴‍♀

    @marcelknippers9591@marcelknippers95914 ай бұрын

    • Yes, it’s always a joy to watch a “How-to” video in fast forward without a single word spoken or explanation given. No?…NO!

      @thousandsunny3103@thousandsunny31034 ай бұрын

  • herrlich gottsei dank auch eine Hinterrad Aktion mega Arbeit mal wieder

    4 ай бұрын

  • I sold a set of forks just like these a few months ago! Lovely build!!

    @Hysterically-Inaccurate@Hysterically-Inaccurate4 ай бұрын

  • What a tank of a frame!

    @janeblogs324@janeblogs3244 ай бұрын

  • Rad build! Grease your headset, seatpost and bottom bracket during install though! I have seen spokes used as filler for these stainless builds as well! Cheers!

    @zachburke8831@zachburke88315 ай бұрын

    • Thank you 😊 Yes missed the seatpost 😅 What the spokes 😱 not in my video

      @TheMetalist@TheMetalist5 ай бұрын

  • Auch hier sieht man wieder eindrucksvoll: Mit der gewohnten Sorgfalt, dem handwerklichen Talent und deinem leicht fanatischen Hang zur Perfektion wird einfach jedes Projekt ein Hammer 😉 Ultrageiles Projekt und das auch noch traumhaft umgesetzt 👍🙌 Danke fürs zeigen und gerne mehr davon! 🤓

    @Lorbuverse@Lorbuverse5 ай бұрын

    • Vielen Dank 😊 also es war natürlich mehr Arbeit wie es im Video rüberkommt. Und viel kleine fummel Arbeit. Bin aber mega stolz vom Endergebnis 😁😁😁

      @TheMetalist@TheMetalist5 ай бұрын

  • Incredible work man

    @hugh5356@hugh53565 ай бұрын

    • Thank you 😁

      @TheMetalist@TheMetalist5 ай бұрын

  • Wie immer großes Kino💪

    @createdesign@createdesign5 ай бұрын

    • Vielen Dank 😊

      @TheMetalist@TheMetalist5 ай бұрын

  • Awesome work as always 👍

    @squirrelmanbob@squirrelmanbob5 ай бұрын

    • Thank you 😁

      @TheMetalist@TheMetalist5 ай бұрын

  • I am going to do this Friday with some Basic Tools and then ride to work on Monday.

    @robinbreeds9217@robinbreeds92173 ай бұрын

  • NO NEED BLUE PRINT. ALL YOU NEED IS STRONG THEORY, EXPERIENCE, AND SKILL . I REALLY LIKE THIS GENTLEMAN 'S VIDEO. LOVE IT

    @user-tx2yt2nh8k@user-tx2yt2nh8k3 ай бұрын

  • I really like his extraordinary ideas

    @irz6534@irz65344 ай бұрын

  • Man you are extremely talented wish I had a quarter of your talent

    @dustinbrosmer6164@dustinbrosmer61645 ай бұрын

    • Talent alone is not enough, risk taking, skill and proper tools are also required. If you have tools just be confidence and try it. Wanting is being able, it just takes time and you shouldn't be in a hurry.

      @haf-oq3vt@haf-oq3vt5 ай бұрын

    • Thank you 😊 yes with time a lot of thinks are possible. Where there is a will there is a way. Greetings

      @TheMetalist@TheMetalist5 ай бұрын

  • Great build sequence. Very nice results. 👍🙂👍

    @cptrikester2671@cptrikester26715 ай бұрын

    • Thank you 😁

      @TheMetalist@TheMetalist5 ай бұрын

  • Schönes Video das zeigt, dass man kein Wissenschaftler oder Künstler sein muss um einen Fahrradrahmen zu bauen. Aber man muss das Handwerk verstanden haben und das kommt super rüber. Ohne E-Motor wäre das "Eisenschwein" bestimmt etwas träge, aber bei der Materialstärke haltbar wie ein alter Lanz ;-)

    @dirkkindermann2734@dirkkindermann27344 ай бұрын

  • Perfeição feito a mão parabéns 👏 😍

    @hytalokarvalho8856@hytalokarvalho88564 ай бұрын

  • Einfach genial Dirk👍👍👍

    @michaelmetzner3981@michaelmetzner39815 ай бұрын

    • Vielen Dank 😊

      @TheMetalist@TheMetalist5 ай бұрын

  • Fantastic!!!

    @LloydGoldsteinMusic@LloydGoldsteinMusic4 ай бұрын

  • I love these videos ❤ Be successful ❤

    @haf-oq3vt@haf-oq3vt5 ай бұрын

    • Thank you 😁

      @TheMetalist@TheMetalist5 ай бұрын

  • Beautiful. Good job 😅

    @subrataroy7744@subrataroy77443 ай бұрын

  • Cool,Easy,Super fast

    @user-pq2io5ir9j@user-pq2io5ir9j4 ай бұрын

  • Hats off to ya

    @richardrawlings6234@richardrawlings62344 ай бұрын

  • Good job👍

    @marmasteris@marmasteris4 ай бұрын

  • 👍Would like to see an all metal speargun build. Never seen one done.

    @user-hn3ju9hz8c@user-hn3ju9hz8c4 ай бұрын

  • Very Well done SIR WOW

    @ecalzo@ecalzo4 ай бұрын

    • Thank you 😊

      @TheMetalist@TheMetalist4 ай бұрын

  • Magnifique travail Merci

    @patricksalmon3494@patricksalmon34945 ай бұрын

    • Thank you

      @TheMetalist@TheMetalist5 ай бұрын

  • "Basic tools" yeah everybody has a welder, pilar drill, metal cutting bandsaw, steel table etc, in their garage. 🤣

    @dogbreath6974@dogbreath69744 ай бұрын

  • Nice to have one 😇😌

    @lampara453@lampara45329 күн бұрын

  • The things in America are really amazing, so I'm in awe of you

    @nilosarmiento6194@nilosarmiento61944 ай бұрын

  • Really beautiful job................ congratulations.

    @lesliewatts7537@lesliewatts753721 күн бұрын

  • Sehr gute Arbeit. Welche sorte rohr hast du verwendet? Bei meinem eigenbau ebike nahm ich nahtloses rohr mit 1 bis 1,5mm wandstärke

    @crosscontra3107@crosscontra31074 ай бұрын

  • Wie immer KLASSE!!!!!!

    @blackforrestwolfmen7897@blackforrestwolfmen78975 ай бұрын

    • Vielen Dank 😊

      @TheMetalist@TheMetalist5 ай бұрын

  • How long did it take you to learn to TIG weld ? Can you give us a bit of your background in welding. You do a nice job of it; something we amateur hacks aren't too likely to match any time soon but we can aspire to.

    @DavidM2002@DavidM20024 ай бұрын

  • Excelent!

    @andrerossi5010@andrerossi50105 ай бұрын

  • 와우 대단한네요 윌리도 잘하시고....

    @CSKang-fe1py@CSKang-fe1py4 ай бұрын

  • Like to know were you got your fork head from or how you went about making it ? Making a E bike now but want to know if you can buy one of the shelf before making press tools ..ta

    @scottgriffiths326@scottgriffiths3264 ай бұрын

  • Genio total!

    @SuperV8mark@SuperV8mark4 ай бұрын

  • By looking at the angle on that head tube, I bet you used to race BMX. Impressive build, thanks for building!

    @adgm917@adgm9175 ай бұрын

    • Thank you 😁 i did some Mountain biking in my early days

      @TheMetalist@TheMetalist5 ай бұрын

    • Nice BMX electric 😁😁

      @ninuasneofox@ninuasneofox4 ай бұрын

  • Hahah the cutting machine with sticker SUBSCRIBE 😂😂😂

    @kuman1212@kuman12124 ай бұрын

  • What kind of steel was used and what state was this shot in? Great video

    @gregthompson8062@gregthompson80624 ай бұрын

  • Most DIY ebike builders dreams of building a frame that is integrated with the battery.

    @joshualapurga3431@joshualapurga34314 ай бұрын

  • SuperExtraMegaEstetic Desire! Totally Great! ❤😊

    @madetowin1612@madetowin16122 ай бұрын

  • Bravo 👏👌

    @alvarobermudez4054@alvarobermudez40543 ай бұрын

  • how much does the frame and wheels weight ? nice project.

    @RazvanCoroama@RazvanCoroama5 ай бұрын

  • what pen is you use to mark it?

    @pamanthanos9742@pamanthanos97424 ай бұрын

  • 대단한 기술입니다.😂

    @user-gw5wt7rf1o@user-gw5wt7rf1o3 ай бұрын

  • Very good

    @PhuocXeDap@PhuocXeDap4 ай бұрын

  • I feel like the threads holding the battery could be a bit too anemic, has that given you any problems?

    @mikstratok@mikstratok4 ай бұрын

  • pls weld a stealth bomber ebike frame

    @Jason01Adana@Jason01Adana2 ай бұрын

  • Good job! How much does it weigh?

    @FixitBuilditLoveit@FixitBuilditLoveit4 ай бұрын

  • Did you put a torque arm on ?

    @user-ux9ll3yk5y@user-ux9ll3yk5y4 ай бұрын

  • Красавец 😊👍

    @user-jp6lf2ie7z@user-jp6lf2ie7z4 ай бұрын

  • I was a tad confused by one of the shots were you already had the wheels put on, before finishing the rest of the assembly. And I have to ask if the only thing that's holding the battery in place is a series of tie-wraps. In my opinion you still need to add a kickstand. But overall it looks very nice, with a sleek design.

    @Yzerbruh@Yzerbruh5 ай бұрын

    • Thank you 😊 i just checked if everything is in line. Sometime it looks staight but it is not 😅 yes a kickstand... Greetings

      @TheMetalist@TheMetalist5 ай бұрын

    • 13:40 three bolts not zip ties

      @TuomoLahtinen@TuomoLahtinen4 ай бұрын

  • Complimenti

    @luciozucchelli8082@luciozucchelli80824 ай бұрын

  • Hi, I'm from NYC, how much do you charge for a frame?

    @tonysantiago3159@tonysantiago3159Ай бұрын

  • Was thinking it was chromoly...but 9.5 lbs. says it's hi tensile steel. Unless the tubing is extremely thick . Nice work building the frame and whole bike..marino custom chromoly hardtails are 3.1 kg 300 bucks.

    @jasonkroll2735@jasonkroll27354 ай бұрын

  • awesome

    @garypeek6392@garypeek63925 ай бұрын

    • Thank you 😁

      @TheMetalist@TheMetalist5 ай бұрын

  • wow keren brother...👍👍👍

    @anjingedan386@anjingedan3863 ай бұрын

  • Mit welchem gas formierst du?

    @domir.6173@domir.61734 ай бұрын

  • Impressive...

    @anthonybatalla1225@anthonybatalla12254 ай бұрын

  • Nice work. this frame can support a Yamaha R1 motor :-)

    @nicodanger13@nicodanger134 ай бұрын

  • Salamat po

    @nickrodis6862@nickrodis68622 ай бұрын

  • guys, what type of air did he put inside the tube during TIG welding?

    @user-sw3mz4ps6f@user-sw3mz4ps6f29 күн бұрын

  • Basic tools for a fab shop

    @undefined7463@undefined74634 ай бұрын

  • Nicely done. Yet the frame is quite heavy, should have used better/lighter tubes though the electric motor compensates some of that. And the overall size seems a little compact for the rider, like a youth size on a grown man. If this was the first frame project, it's a nice start, can make it better next time.

    @cycleistic1365@cycleistic13654 ай бұрын

  • Wow das ist echt beeindruckend! Lg Katharina

    @katharinak.5910@katharinak.59105 ай бұрын

    • Vielen Dank 😊 Grüße zurück 👋

      @TheMetalist@TheMetalist5 ай бұрын

  • So many things I want to say… but I’ll just stick with this: “We don’t need no lubricants ‘round ‘ere, and if at first it don’t fit… Hammer it.”

    @thousandsunny3103@thousandsunny31034 ай бұрын

  • أحسنت واصل

    @medmezioud6360@medmezioud6360Ай бұрын

  • ok where do you get the parts ie bottom bracket ,headtube , disc brake mounts for chain stay ....

    @craigengelman1369@craigengelman13692 ай бұрын

    • I made the Bottom bracket and headtub on a late. Brake mounts made in the video

      @TheMetalist@TheMetalist2 ай бұрын

  • Genius, mt friend. It. was a pleasure watching you work. If I may ask, what was the final weight of the bike. Cheers!

    @tjkoker@tjkoker5 ай бұрын

    • Probably somewhere around 20kg lol

      @blankroomsoup666@blankroomsoup6664 ай бұрын

  • Moin, geiles Projekt ✌️😎 Ein paar Gedanken / Punkte: Das Schaltauge wird eigentlich bewusst extra anschraubbar gemacht, da es gerne mal bei Schaltfehlern massiv verbogen wird oder gar abbricht. Passiert, wenn das Schaltwerk mitsamt der verhedderten Kette hinten über den Rahmen rauf gebogen wird. Passiert öfter als man denkt und will, gerade bei off-road. Schaltwerk fix mit Ausfallende findet man eher bei den günstigeren Rädern, wo das oft ein ganzes Stanzteil ist. Kriegst du sicher in dem Fall wieder schön hingebogen, aber das kann man ja auch vermeiden 😏 Beim Einbau von Steuersatz und Innenlager unbedingt Montagepaste oder zumindest Fett verwenden, das kann sich sonst schön festfressen. Hast du sicher gemacht, aber im Video hab ich es nicht sehen können. Aber all in all richtig schönes Projekt! Glückwunsch!

    @trashes_to_treasures@trashes_to_treasures5 ай бұрын

    • Vielen Dank 😊 Ja das mit dem Schaltauge wollte ich erstmal auch zum schrauben machen war mir aber dann doch zu viel arbeiten. Werde mich dann ärgern wenns passiert. Wird aber wenig als mtb benutzt deswegen gehe ich mal davon aus das....😅 Ne Paste hab ich nicht gemacht 😅 und dafür hab ich jetzt gerade auch keine ausrede 😅 Grüße

      @TheMetalist@TheMetalist5 ай бұрын

    • Bei Stahlrahmen ist es doch üblich, dass das Schaltauge fest mit dem Ausfallende verbunden ist. Erst als die Alu-Rahmen aufkamen wurde das anders, weil ein Schaltauge aus Alu beim Zurückbiegen ziemlich schnell abreißt. Stahl kannst du dagegen ziemlich häufig und sehr stark biegen.

      @RazzFazz-Race@RazzFazz-Race4 ай бұрын

  • Is that titanium?

    @dougie8010@dougie80104 ай бұрын

  • Tig weld, basic tools so what are the special tools

    @Bvanyangu352@Bvanyangu3522 ай бұрын

  • Geile Nummer, was fürn Edelstahl hast Du genommen und sind das Steuerrohr und das Tretlagerrohr selbst gedreht?

    @Alex2OC@Alex2OC5 ай бұрын

    • Vielen Dank 😊 1.4571 teile sind selbst gedreht aber waren mal für ein Projekt gedacht das ich vor 5Jahren mal bauen wollte😅

      @TheMetalist@TheMetalist5 ай бұрын

  • Top

    @lucaleardi6390@lucaleardi63905 ай бұрын

  • question, does it not need to be temped with heat first? i know alum bikes need it just wondering if stainless does as well?

    @AlteredCarbons@AlteredCarbons5 ай бұрын

    • This doesn't actually help with stainless steel and not all aluminum needs to be heat treated. There are aluminum alloys that do not require heat treatment

      @TheMetalist@TheMetalist5 ай бұрын

    • @@TheMetalist thanks for the response. i was never good with tig unfortunately. so i missed a lot of stainless stuff while learning stick/flux/mig. i tried doing tig a bunch of times. i can do steal, but thats about it. nothing ever works for Alum/Strain for me.

      @AlteredCarbons@AlteredCarbons5 ай бұрын

    • @@AlteredCarbons With a little time you can learn a lot😊

      @TheMetalist@TheMetalist5 ай бұрын

  • Would you post your videos on Odysee as well? You can mirror your YT channel.

    @FloridaRCFlyer@FloridaRCFlyer5 ай бұрын

  • Amigo. fas um quadro de bike aro 26 downhill . Desse material

    @user-eo8nr7uw7t@user-eo8nr7uw7t2 ай бұрын

  • this is why i want to learn how to weld so i can make my own frame

    @LevioPlays@LevioPlays4 ай бұрын

    • TIG welders are expensive, a decent one at leat $2,000 plus you have to get gas bottles( Argon, CO2, etc depending on what your welding) You can buy a ready made Ti frame about same money.

      @1crazypj@1crazypj3 ай бұрын

  • Rad dude. Just shows you don't need all the fancy tools to make a bike.

    @slimdog72@slimdog725 ай бұрын

    • Thank you 😊 i don't have space for fancy Big tools 😅

      @TheMetalist@TheMetalist5 ай бұрын

  • I’m confused it said in the beginning there was paid advertising. But as usual he never said anything or showed the name of the accessories he used. Great build a lot of angles go into building a bicycle.

    @kenneysheppard7763@kenneysheppard77635 ай бұрын

    • Thank you 😁 The convert kit to a ebike is sponsor Greetings

      @TheMetalist@TheMetalist5 ай бұрын

  • sehr sehr cooler rahmen!! verarbeitest du eigentlich auch titan? lg elmar

    @neta1538@neta15385 ай бұрын

    • Vielen Dank 😊 Also titan geschweißt habe ich schon. Aber als Fahrradrahmen noch nicht. Grüße Dirk

      @TheMetalist@TheMetalist5 ай бұрын

  • Nice work. I would have rather it not be an e-bike from an aesthetics perspective. But I get the functionality if that’s what you are going for.

    @tonyvitiello9897@tonyvitiello98974 ай бұрын

  • Super bike... I want one😅

    @lucblin1435@lucblin14355 ай бұрын

    • Thank you 😁

      @TheMetalist@TheMetalist5 ай бұрын

  • Why does he plug the holes and pump the inside full of a gas?

    @fizzwidgy@fizzwidgy4 ай бұрын

  • What is the top speed? 🚴🚴🚴

    @anonymously241@anonymously2414 ай бұрын

  • wird das nicht zu schwer?

    @udos.2987@udos.29874 ай бұрын

  • What thickness (mm) is the workbench top?

    @johnkinsella5686@johnkinsella56865 ай бұрын

    • 8mm

      @TheMetalist@TheMetalist5 ай бұрын

  • Basic tool on which kind of shop???

    @ComadrejaRaces@ComadrejaRaces3 ай бұрын

  • Hello! Good job! Why stainless steel? Why not titanium, because it is lighter?

    @alexanderlogunov9758@alexanderlogunov97585 ай бұрын

    • Hi thank you. I thought so but i'm not so experienced with titan 😅

      @TheMetalist@TheMetalist5 ай бұрын
KZhead