KZhead

Process of Road Bike Wheels Mass Production / 公路車碳纖維輪組量產 - Taiwan Bike Wheel System Factory

Lemon Films 檸檬職人探索頻道
2023 ж. 21 Жел.
1 215 023 Рет қаралды
Жүктеу

Mass production factory for road bike wheel assembly systems!
This is a factory specializing in the mass production of road bicycle wheel assemblies,
manufacturing for brands such as XERO and several others.
The customers span across countries worldwide, and you might have experienced the high quality of this wheel assemblies!"
Hi, there! Welcome to Lemon Films Channel 😆
If you enjoy this video, please leave a like and subscribe to see more delicious foods.😋
Please feel free to leave any comments or questions below. Thank you!
✨Product in This Video✨
Mach 64 Disc Road / 馬赫64公路碟煞
$1,597.51 USD / 49,000 NTD
*Location information*
鑫元鴻實業股份有限公司 (XERO)
www.xerowheel.com/EN/
#wheel #WheelAssembly #BikeWheel #RoadBike #Bicycle #Process #ProcessVideo #factory #MassProduction #輪組 #公路車 #自行車 #台灣工廠

Пікірлер

  • Интересно

    @user-do5pq7ip8m@user-do5pq7ip8m26 күн бұрын

  • OK 🆗 WELCOME TO BOGOTA DC COLOMBIA

    @hugomoreno1361@hugomoreno136112 күн бұрын

  • Прикольно

    @minister5585@minister558522 күн бұрын

  • 這是一個好工廠

    @user-sh4wx4kk5x@user-sh4wx4kk5xАй бұрын

  • ❤❤❤❤❤❤

    @user-ph2rp5xl7m@user-ph2rp5xl7m8 күн бұрын

  • so much pride in manufacturing, great work.

    @mgjk@mgjk4 ай бұрын

  • Nível superior ❤

    @WaldeciGomesMEC_DIESEL@WaldeciGomesMEC_DIESEL2 ай бұрын

  • 曲老闆聽著， 我見過的最好的自行車車輪製作， 非常最大和最好的結果,,,👍

    @blacklabel810@blacklabel8104 ай бұрын

  • 原來是XERO 以前用過 鋁邊碳刀 不錯 .

    @jpkinjp6769@jpkinjp67694 ай бұрын

  • 療癒！讓人目不轉睛默默地看完了~

    @potsang6316@potsang63163 ай бұрын

  • What amazing technology

    @FiveTech6368@FiveTech6368Ай бұрын

  • That scott time trial bike at the end was beautiful

    @c2thew@c2thew4 ай бұрын

  • fantastico video muy bueno. gracias

    @angelruedalocagonzalezgonz151@angelruedalocagonzalezgonz1514 ай бұрын

  • 😎❤️🇹🇼‼️the bicycle kingdom!!!

    @TL243@TL2433 ай бұрын

  • 看製造過程會讓人想買，好的碳輪輪一直都是騎車人的夢幻逸品。

    @user-xo1fq8tp4s@user-xo1fq8tp4s4 ай бұрын

    • Это не карбоновые обода. Это алюминиевые + плёнка.

      @kislovdmitriy@kislovdmitriy2 ай бұрын

  • Impressive operation

    @inzana2@inzana24 ай бұрын

  • 鑫元鴻的輪組以前很超值，很耐用，早期用在捷安特廠車輪組上，我老車上還有一組用到現在。原來鑫元鴻從輪框、鋼絲都自己生產，大部份鋼絲都用協達或是DT，花鼓鑫元鴻也都自家的，不是用昆騰或是喬紳，怎麼一點錢都不留給別人賺 XD。國產就給讚啦！

    @yuhdar@yuhdar3 ай бұрын

  • 原來是公路車 看到一半就發現這東西不簡單 當然價格也非常不簡單...

    @keitang9274@keitang92744 ай бұрын

  • Is there anybody over 18 in that factory? 😅

    @janosnagyj.9540@janosnagyj.95407 күн бұрын

  • Excellent work ❤👍🤝

    @MechanicAvenue@MechanicAvenueАй бұрын

  • Wow hermosas❤

    @andreyrozodominguez8050@andreyrozodominguez80503 ай бұрын

  • Impressed by how manual the process is. Especially the carbon wheel.

    @aderbalnunesm@aderbalnunesm4 ай бұрын

    • Hence the justified high price

      @robinbantigny8640@robinbantigny86403 ай бұрын

    • Fake carbon wheel.

      @metricstormtrooper@metricstormtrooperАй бұрын

    • @@metricstormtrooperMy first thought as well.

      @l.k.1011@l.k.1011Ай бұрын

    • Those rims did not look like high price ones 😂​@robinbantigny8640

      @benturp3492@benturp3492Ай бұрын

  • I saw a very crucial step！

    @silverxia497@silverxia4974 ай бұрын

  • Just incredible! Thanks for uploading.

    @dalegreenaway@dalegreenaway4 ай бұрын

    • Thank you🥰

      @lemon_films@lemon_films4 ай бұрын

  • 와 멋지네요~

    @user-vb7zj1wc6v@user-vb7zj1wc6vАй бұрын

  • Thank you for posting this!

    @latrace1986@latrace19864 ай бұрын

    • Thank you🥰

      @lemon_films@lemon_films4 ай бұрын

  • Nice work.....

    @parnuzutech@parnuzutech3 ай бұрын

  • I think a lot of people have ridden Formula wheels and hubs without ever knowing it. Great company.

    @munkymunk@munkymunk4 ай бұрын

    • These are not Formulas

      @Minwary@Minwary4 ай бұрын

    • @@Minwaryit’s says it right at the beginning that it’s the formula company

      @Eseckiels@Eseckiels4 ай бұрын

    • Most cheap bikes that have unbranded hubs are formula. Never see them otherwise in the higher end, with a cheap rim and a cheap hub I don’t know why they’re 1500.

      @AnotherMrLizard@AnotherMrLizard4 ай бұрын

    • @@AnotherMrLizardand you can see them applying a layer of carbon onto the al rim… what a scam

      @Jean-jk4zv@Jean-jk4zv4 ай бұрын

    • @@Jean-jk4zv Better call HED and tell them they're scamming people lol

      @itsjustpizza@itsjustpizza4 ай бұрын

  • Класс! Производство на высшем уровне 👍

    @user-G23RTkzKok@user-G23RTkzKok28 күн бұрын

  • 대단하네요 타이완의 자전거 기술력은 역시 세계최고입니다❤

    @user-ej7wq9hp2h@user-ej7wq9hp2h4 ай бұрын

    • 감사해요🥰

      @lemon_films@lemon_films4 ай бұрын

  • Tremendous amount of hand work is surprising.

    @ssnoc@ssnoc3 ай бұрын

  • And i thought some of my rides were monotomous. I have a new apprecition on so many levels.

    @joro8604@joro86044 ай бұрын

  • wow that's a lot of precision tech

    @NanashiCAST@NanashiCAST4 ай бұрын

  • Xero の １０Sホイール昔使ってました！

    @user-vm9no7fu2b@user-vm9no7fu2b3 ай бұрын

  • 알루휠 만들다 카본원사가 왜 나오나 했더니 저렇게 만드는구나 갓구운 카본휠 맛있겠다

    @ysh258@ysh2584 ай бұрын

  • 鑫元鴻讚

    @user-hq2ux4li6x@user-hq2ux4li6x2 ай бұрын

  • Champion ! Give the taste to own this bike . Have a nice 2024.

    @eloimumford5247@eloimumford52474 ай бұрын

  • OK I promise to no longer complain about the cost of a new set of wheels.

    @user-ke9yk5qp3u@user-ke9yk5qp3u4 ай бұрын

  • 훌륭하네요

    @yoonkunlee5885@yoonkunlee5885Ай бұрын

  • I long for the steel italian handmade frames of the seventies

    @rampetampen@rampetampenАй бұрын

  • 如能大量平宜就好，好有興趣租用-一試。😂

    @TakWahCHIU-ho2eu@TakWahCHIU-ho2eu4 ай бұрын

  • no real sound protection

    @jimksa67@jimksa67Ай бұрын

  • 産業革命は偉大だ

    @user-rv9qi7gb2b@user-rv9qi7gb2b4 ай бұрын

  • 무척 신선하고 도움이 되는 영상입니다.

    @user-lb9gw5kn9d@user-lb9gw5kn9d4 ай бұрын

  • wow this front hubs is the same roval by dt swiss 21 spoke

    @xXxZoahxXx@xXxZoahxXx3 ай бұрын

  • I hope the workers are safe. I see a lot of gloves that can be caught up and pull hands in the machine.

    @bobdebouwer7835@bobdebouwer78354 ай бұрын

    • Zobacz sobie ja wyląda produkcja w indiach😢

      @szczuraki@szczuraki8 күн бұрын

  • I wonder if the staff at the manual calibration part of the line have a target of a certain number of wheels they have to get through per shift? Since calibration is the final step in manufacturing, I hope the staff I given time to fine tune all the wheels to the correct spoke tensions.

    @Rose.Of.Hizaki@Rose.Of.Hizaki4 ай бұрын

    • almost certainly, i know when they make frames for pro teams they make sure to use the best most experienced workers in the factory and there's no time constraints but what consumers get is the rushed time crunch version

      @fanda6122@fanda61224 ай бұрын

    • They definitely don't. Nearly every single brand new wheel requires at least a minimum amount of truing and bearing adjustment before being sold.

      @itsjustpizza@itsjustpizza4 ай бұрын

    • evidence?@@itsjustpizza

      @JoehnDoue@JoehnDoue4 ай бұрын

    • @@JoehnDoue my fingers, a truing stand, my eyes lol. Formula has been around for many years, but this is pretty standard for (as I said) pretty much all wheels. Next time you're in your LBS probe their brains a little bit. These mass produced wheels especially need checked before they go out the door. Not doing so is an amateur move idc how much they cost.

      @itsjustpizza@itsjustpizza4 ай бұрын

    • ok@@itsjustpizza

      @JoehnDoue@JoehnDoue4 ай бұрын

  • 這樣做法精準不高會誤差

    @user-xj1if6ml3n@user-xj1if6ml3n3 ай бұрын

  • Yep, specialized places a sticker on, marks it up 100%, and calls it a day.

    @ebhkkc1@ebhkkc14 ай бұрын

  • Good job ❤

    @jarpen3@jarpen34 ай бұрын

  • 3:40 must be to get all the metal shavings out of the rim.

    @adampatterson@adampatterson3 ай бұрын

  • 認真工作啊，百萬印工要來了😂

    @user-ih4vf6lx6y@user-ih4vf6lx6yАй бұрын

  • They are made of aluminium covered with a carbon film, which is why they are cheaper than full carbon.

    @jorgeandrade2168@jorgeandrade21683 ай бұрын

    • Thank you. I was wondering why the aluminum rims and then the carbon fiber.

      @johnhenrick2298@johnhenrick22983 ай бұрын

    • i don't think that's right

      @markifi@markifiАй бұрын

  • عجيب جدا. صناعة رائعة فوق الخيال 🌴🌴🌸🌸

    @abdellahzaidi1257@abdellahzaidi12574 ай бұрын

  • 자덕으로써,좋은경험했습니다.휠생산공정도 손이많이가는군요.

    @user-zc7wi1jm2f@user-zc7wi1jm2f4 ай бұрын

  • neat process...but don't like the look of the bike. just me.

    @TexTom1981@TexTom198121 күн бұрын

  • Ceramicspeed : 8:35; 8:44.

    @jrclad2964@jrclad29644 ай бұрын

  • Mr Video Editor you need a redo regarding how the mold works in carbon rim manufacturing.

    @escgoogle3865@escgoogle38653 ай бұрын

    • The carbon you see is pre-impregnated with resin and harder. this is stored at low temperatures, so it doesn't cure. The fabric is cut at 45 degrees, and then 2 layers are pressed together (or maybe more). When the layers are put in the mold, a plastic bag is put in, this is used to push the layers against the walls of the mold using air pressure. In the oven, the resin gets cured. (now you know this, watch again... you can see every step)

      @permanenceinchange2326@permanenceinchange23263 ай бұрын

  • Nice quiet first half…

    @Carbonbank@Carbonbank4 ай бұрын

    • Very relaxing

      @russyJ20@russyJ20Ай бұрын

  • Me encanto, muy buen contenido 👍

    @francisperez9205@francisperez92053 ай бұрын

    • Gracias🥰

      @lemon_films@lemon_films2 ай бұрын

  • 當你在開趴語音控製要喊過你的音響，智能有時候很好用有時候後也會讓你冒煙

    @andy1414liu@andy1414liu4 ай бұрын

  • C’est la fabrication de roues aluminium recouvert de carbone que nous voyons ?

    @Vincent_Langlois_Carbone0@Vincent_Langlois_Carbone04 ай бұрын

  • L’Asie usines du monde

    @henribarras8469@henribarras8469Ай бұрын

  • Very cool to see. Hubs on my mtb are formula and wouldn't be surprised if so are the wtb rims.

    @dylan-5287@dylan-52874 ай бұрын

  • 見た目はカーボン、中身はアルミ？

    @dj5fs233@dj5fs2334 ай бұрын

  • 原來碳纖維輪組也有鋁合金材質喔？

    @xfkx@xfkx4 ай бұрын

    • 這根本偷料只有貼皮這樣叫碳纖維 偷很大

      @user-xj1if6ml3n@user-xj1if6ml3n3 ай бұрын

  • 2:34 Typically there is a piece of steel inserted into aluminum rims at the joint.

    @nemeczek67@nemeczek674 ай бұрын

    • Not if they are welded. If they are pinned then it is most likely an aluminium plug.

      @karlwalters3763@karlwalters37634 ай бұрын

  • Saludos desde México 😊 Buen video

    @israeldavalos2351@israeldavalos23513 ай бұрын

    • ¡Gracias!🥰

      @lemon_films@lemon_films3 ай бұрын

  • 以前曾在做碳纖輪圈的小工廠工作，只能說差好多，自動化機器做出來的速度跟製程，以前工廠做的八成都是手工，根本比不上

    @kvevnwang8902@kvevnwang89023 ай бұрын

  • 46000台幣阿 好貴但厲害

    @Kutarbear@Kutarbear4 ай бұрын

  • The carbon wheel has an aluminium frame?

    @ckhong3569@ckhong3569Ай бұрын

  • Super ! ❤⭐⭐⭐⭐⭐⭐🌹🙏☀️💐

    @paisfr@paisfr3 ай бұрын

  • 大陸工廠很多可以好好來學習提升製程

    @Jacob.Agrace@Jacob.Agrace3 ай бұрын

  • 原來碳纖維輪組的框,還是有個鋁框做基底!

    @alain0219@alain02194 ай бұрын

    • That's the impression I got, as there was no reference to it been removed.

      @andrewwarcup684@andrewwarcup6844 ай бұрын

    • 那只是為了貼碳布方便做成型使用，拿進去烤箱時就會拿起來

      @zhoujack662@zhoujack6624 ай бұрын

    • I think the first aluminum alloy rim and the later carbon rim are different products.

      @lovedrinkbeer@lovedrinkbeer4 ай бұрын

    • @@zhoujack662 可是製程中還在那個鋁框上雷射蝕刻產品編號，而且影片一開始就是產線上大量製造鋁框，怎麼看都是輪組的一部分

      @ot1560@ot1560Ай бұрын

  • ❤❤❤❤

    @maymocvanongnghiep1123@maymocvanongnghiep11232 ай бұрын

  • Beautiful production line, these wheels are made with such care and pride, no wonder they are so expensive.

    @johndoyle4723@johndoyle47234 ай бұрын

  • Good video, I like since the begining until the final and the keep in details in all the process of manufacturing. Greetings from Peru - Southamerica (march 22, 2024) 🇵🇪😉👍🏻

    @Nepbor@NepborАй бұрын

  • Nice

    @Alan_Hans__@Alan_Hans__4 ай бұрын

  • Обода делали одни а на велике уже другие! Фокусы они такие! )))))

    @MsAndrei4@MsAndrei42 ай бұрын

  • That was a wheely good video.😐

    @JamesSmith-qs4hx@JamesSmith-qs4hx3 ай бұрын

    • Thank you🥰

      @lemon_films@lemon_films3 ай бұрын

    • @@lemon_films based 🙏

      @JamesSmith-qs4hx@JamesSmith-qs4hx3 ай бұрын

  • 輪圈原來有包鋁。車架也是一樣的製程嗎？

    @pasuya@pasuya4 ай бұрын

    • 我們也想拍到車架😂 正在積極洽談中～～

      @lemon_films@lemon_films4 ай бұрын

    • @@lemon_films 我想看車手架

      @cupid19901223@cupid1990122319 күн бұрын

  • Fascinating! It was a good study to make me further appreciate my bikes :)

    @user-nt8dy4xw9r@user-nt8dy4xw9r4 ай бұрын

  • tension testing 是应力释放么？

    @zhongdasun8772@zhongdasun87724 ай бұрын

  • interesting to see how carbon wheels are actually more of a hassle to make, and how wheels are actually kind of hand-made. I had in my mind a 100% automated process for some reason.

    @cegalleta@cegalleta4 ай бұрын

    • Are they carbon wheels? It looked like a wrap put onto aluminum rims, no? Check 4:29

      @MadChalet@MadChalet4 ай бұрын

    • @@MadChalet I thought it was a mold, never had seen hybrid carbon-aluminum wheels marketed as such before. It could potentially be dangerous if that's the case tbh, because of galvanic corrosion

      @cegalleta@cegalleta4 ай бұрын

    • @@MadChalet How to make a perfect rim with leaves?? Well you need a mold... here in aluminum, which then goes in the oven. Everything is in pictures... a minimum of reflection

      @Fr3dr1k@Fr3dr1k4 ай бұрын

  • Very good! 👏👏👏👏

    @eugeniosouza6633@eugeniosouza66334 ай бұрын

  • wait, so carbon rims are not 100% carbon but alloy core with carbon finish?

    @robert02588@robert025882 ай бұрын

    • this used to be the case with some rims 15 years ago, but these rims i believe are full crabon. in the video they first finish an aluminium rim with tumbling, drilling, and engraving, then they cut to an entire different rim's crabon lay-up. otherwise it would make zero sense to engrave and drill the aluminium insert. that's not what they do in the video. as a curiosity, the old mavic cosmic did have an aluminium insert for some reason. the carbon "jacket" on it (term picked by me) was just a very thin layer of crabon on a conventional rim to make it look more aero it was a really weird thing at the time, cca. 2009

      @markifi@markifiАй бұрын

  • Just what is the point of wrapping an aluminium rim in carbon?

    @metricstormtrooper@metricstormtrooper4 ай бұрын

    • Perhaps because the stiffness contribution of carbon fibre is best achieved by placing it at the outside surfaces.

      @boredKiwi@boredKiwi4 ай бұрын

    • people want to pay more

      @dennislevy3603@dennislevy36034 ай бұрын

  • wait, so 95% of carbon wheel rim is made of aluminium? That's a scam.

    @-COBRA@-COBRA4 ай бұрын

    • they show 3 different rims in the video i believe

      @markifi@markifiАй бұрын

  • мне б такой.

    @user-dh5uq9yg1s@user-dh5uq9yg1s4 ай бұрын

  • nice

    @a-fl-man640@a-fl-man6404 ай бұрын

  • 9:00 some so called professional dealers charge sky high price to build/tune the wheel. The staffs in the factory build 1000X more but get 1/1000X wage

    @Mike-so4fg@Mike-so4fg3 ай бұрын

  • 😊 Vielen Danf fürs Hochladen - bin Maschinenbaumeister und Fahrradfahrer - das Bike gefällt mir sehr. 😊

    @wolfgangtatzel3706@wolfgangtatzel37064 ай бұрын

    • Thank you🥰

      @lemon_films@lemon_films4 ай бұрын

  • 멋지네요 굿~ 👍👍

    @jungbrain5989@jungbrain59894 ай бұрын

  • 6:20まではアルミホイールにカーボン張った商品で、9:20は別のホイール（ディープリムホイール）、ディープリムホイール（アルミベース？）の作成工程が無い 残念

    @hagetora2009@hagetora2009Ай бұрын

  • 😊😮 fantastico lavoro,bravissimi

    @clauscaio6367@clauscaio63674 ай бұрын

  • 한국은 자동차 산업으로 전환하며 대만에 자전거산업을 넘겨준 과거가 생각난다...

    @user-hm2ic7gf5t@user-hm2ic7gf5t4 ай бұрын

  • 職人の経験や勘、その日の気分や天候で出来に差が出るホイールよりもこういう設備が整った工場で量産されるホイールの方を信頼しています

    @user-go4me7qw7y@user-go4me7qw7y3 ай бұрын

  • @04:52 , wait what ? Applying carbon fiber on aluminium rims 😂

    @Jean-jk4zv@Jean-jk4zv4 ай бұрын

    • not really

      @markifi@markifiАй бұрын

  • I am curious. Was it poor video editing or were those carbon wheels simply carbon sheets bonded to aluminium wheels? Or was it that an aluminium wheel rim is first produced in order to act.as a template mold and then used as a guide for the carbon layup? Thanks in advance.

    @paullevy-adophy9198@paullevy-adophy91984 ай бұрын

    • I'm also curious about this... surely its not some kind of alloy/carbon mix as i can't see what the point of that would be

      @jamesbennett1691@jamesbennett16914 ай бұрын

    • Glad I'm not the only one wondering. For a moment I thought carbon rims are just alloy on the inside, but I can't imagine that...?

      @thetinusnl8834@thetinusnl88344 ай бұрын

    • It's alloy wheels with carbon surface. This is why those wheels are cheaper than full carbon wheels

      @yukiko_5051@yukiko_50513 ай бұрын

    • it's a poor edit. you can see the aluminium rim being finished and then they cut to a shallow section carbon rim being made in the stainless steel mould. if you don't believe me, why would they first drill and engrave an alloy part that would just be hidden under carbon? it would be an unnecessary step. this isn't what's happening in the video

      @markifi@markifiАй бұрын

  • Nothing especcialy. Standard mass production. But at low cost for human labor.

    @vladimirpesut7470@vladimirpesut7470Ай бұрын
KZhead