Electric Water Pump Restoration | Soviet Water Pump
2019 ж. 5 Нау.
7 631 854 Рет қаралды
Electric Water Pump Restoration video
This soviet water pump that I got my hometown, It is my grandfather's. I just know it is soviet water pump at water pump spare parts shop. You can find more detail in the video.
I hope you find something useful & enjoy from this video!
I am happy to receive your feedbacks, advices, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
--------------Thank you so much for Likes & Comments--------------
Стоял такой в старом доме) Использовался в основном для полива огорода, ну и воды набрать когда на водокачке неподалёку отключали. Лайк за восстановление хорошей советской техники 👍
А зачем?
Как течёт вода, как горит огонь, и как мужик, чинит советский насос, с болтиками под простую отвёртку... Красота!!!
I'm quite certain most of the viewers of this video might be men/boys, Ive been always fascinated by these kind of videos whether it's restoring or fixing anything I just love to watch it, I like how this man had so many interesting tools to restore this pump. This is man's world.
This soviet pump is definetely better than my 2 year old chinese cheap pump, already had to do a major service to it. Awesome restoration work!
I felt such a relief when you finally unscrewed that second tube 😅
I know what you mean... I actually cheered!
6:04 Slow clapping. Nod of respect.
I was imagining other ways to remove it but using a vise was one of my first options.
Should have clamped the entire pump in a vise, first thing.
If he was heating the frame of the pump rather than that tube he would’ve gotten it off a lot earlier.
The pleasant street sounds in the background are one of the reasons these videos are so relaxing
I knowits NOT funny but its nice to see that even a PRO can have a tough time getting things un-stuck!
Máš šikovné ruce co něco umí 👍
The water was really Russian out of there at the end...
Because of the rubber pipe.
.....no
Where is the new video man ? It took so long now. Always waiting your new restoration videos.
Вот вроде и разбираюсь в целом в английском, а что он тут написал - не понимаю. Кто-нибудь подсобит с переводом?
@@Drankoii - It's a play on words. The pronunciation of "Russian" is almost the same as "rushing". As in: "The water was really rushing out of there at the end..."
I'm always amazed, when watching restoration videos, that nobody seems to have heard of Phosphoric Acid, to neutralize rust on iron and steel parts. They use harsh wire brushes instead, which removes the rust, but also removes metal as well. I used to use the classic gel form of Phosphoric Acid, called Naval Jelly, which I just checked-- you can still get. A light coating of jelly, or soaking in phosphoric acid, will quickly get rid of rust, without eating into the metal. Still, cool video-- I'd have been too afraid to tackle an old electric motor-- the copper wiring is so delicate on these things, never mind the centrifugal starting circuit.
Золотые руки! Сегодня редкость, даже у инженеров. У нас пол института не способна лампочку закрутить, а паять схемы иль тем паче перебрать такой вот аппарат своими руками ... дети с дипломами... Но вот у этого парня чувствуется советская косточка ;) Его батя, как пить дать, брал с собой в гараж, чтобы малой помогал ему жигуль ремонтировать...
Чего там золотого? Он грел горелкой трубу а не алюминий в который она вкручена, потом просверлил болт-пробку насквозь зачемто , понятно же было что шляпка отвалится , в общем смотрел через "фейспалм", парень типичный гуманитарий , хотя старается конечно...
Кама 8 хороший насос, за восстановление 👍, и привет из Перми!🙂 Оригинальный цвет у него кстати серый. На валу надо было оставить закрытую гайку, с этой ржаветь вал будет.
You should have to check balancing of impeller to overcome the running noise which we heard, overall you have did fantastic job
Nothing like old-school Soviet "craftsmanship".
For irrigation in my garden I still use vertical centrifugal water pump made in USSR in 1980s. Without any repairs. And you've restored "Kama-8" pump perfectly.
Эта помпа, путешествует по миру больше чем я...
I also restored a soviet vibration well pump here in Romania. Best engineering soviets had.
Great video. That jammed tube really made me nervous. But you unscrewed it well. Thank you for sharing.
Комментарий в поддержку видео и канала, а также труда мастера
I keep saying to myself I've seen enough let's watch something else but yet I keep watching.
Benjamin Burton same
The high amplitude in vibration is caused by unbalanced fins and or eccentric rotor axis.
Amazing restoration work ! Remind me of legendary durable Soviet machines. Friend from 🇻🇳
Ураганный насос и ремонтно пригодный !Иностранные насосы столько не выдерживают работы!
احترام واحتراف في المهنة عمل ممتاز سبحان الله
Isto é o que eu chamo de uma excelente manutenção... Meus parabéns
I had nothing to do with the work, yet I still feel satisfied. I liked the music choice at the end, too.
,,,
Wow now that is one quiet pump!
You need to buy a sand blaster ASAP! Great work!
I couldn’t melted this into an awesome doorstop 👊🏻😁🇦🇺🍻🍻
i could see that now lol
,
EXCELENTE TRABAJO, GRACIAS POR COMPARTIR, SALUDOS DESDE MEXICO.
Idk why but watching these videos is so soothing.
Good idea, PowerPlug in one hand water pipe in the other.
Тоже как то не привычно было видеть насос нашего производства)
Реставратор жил в России
Serviço bem feito,e com as ferramentas adequadas,facilita e muito o serviço.parabéns nota 10.
One of the best restoration jobs i ever seen !
Se ve que la persona hace su trabajo con muchas ganas con gusto y tiene la actitud, experiencia e iniciativa y herramienta para hacerlo a detalle es un trabajo de calidad no como algunos mecánicos que trabajan al ahí se va muy bien video felicidades
Неожиданно было увидеть советский насос "кама 8" тут)
Работающий от 110
У меня точно такой но увы уже сгоревший недавно
Nice work! 60 Roubles at 1984 - quite expensive.
H
Не очень. Насосы для полива и за сотню переваливали.
GrandPa would be so proud of You..fantastic restore..
Great restoration.
Bomba de água ficou top! Nice work, beast!!!
so much effort on restoration. great work!
Geez! So convoluted for what it does, isn't it? Incredible piece of engineering!
This is so impressive to watch, identifying and disassembling electronics like that is so alien to me
Смотрю перед сном эти видео - хорошо расслабляет))
Такая же фигня)
Вот такая же фигня, залипастые видосы)
Ага точно
Идеально помогают уснуть
Обосрался что ли?
what a great job!! a little bit noisy ,but you earn a lot of RESPECT!
It was great to see the actual demonstration of the pump doing it's job at the end of your video. So many other restoration people just show the finished job but no working proof. Good job and video.
Вот это значит золотые и умелые руки,Респект мастеру х
А ты заметил что насос советский Кама.
кама8, делали на пермском электротехническом заводе. неплохой бытовой насос, надежный, может выжить, даже если его утопить немного. есть и неприятная особенность: очень требователен к всасывающему трубопроводу- он должен быть минимальной длины и герметичным. малейшее подсасывание воздуха и все, насос крутится в холостую, перегревается и умирает(конечно, если не уследить).
У самого такой
@@ValeryJan вот откуда вы такие вылазите только... Любой центробежный "соснул воздуха, и писец". Только со встроенным эжектором более-менее прокатит. И Кама это или Даб - похер. Но мозгов-то не хватает для знаний, а вот для обсерания - запросто.
поэтому: чтобы не провафлить насос, ставим на него дополнительно термодатчик перегрева, я такой на свой моторчик вентилятора холодильника прилепил. Автор о таких видимо не знает, а то бы поставил тоже, там внутри ОВД места много. И провода спаял хреновенько, надо "обворачивать" вокруг пистонов, иначе отваливается.
чувак что ты несешь ? утопить коллекторный насос ? удачи братан !!!
Translation please mobile doesn't like some of the symbols of the Russian written language.
When that pipe finally unscrewed. I Screamed Out loud!!!
Svaka čast sve pohvale za tebe sjajno kako raskvariš i sastaviš
The fact you can repair something like that is impressive. I didn't think you could get something like that to look new!
Nice work. Thumb up!
Old like New - RESTORATION del
Hola
Eu tenho admiração pelo teu trabalho
At time to fix bearings must put Greece to reduce sound and move smoothly Good job dear
This is one of the hardest restoration work man. I am sure you are an expert in this. Congrats for your work.
Good job. I am not too familiar with your work, but sometimes with a stuck pipe it's easier to tighten it a bit to break it.
goo.gl/search/Wiadomo%C5%9Bci
После того, как побрызгал, нужно подождать минут 30, потом уже откручивать.
I can tell you were very pleased with those spring catches 😂
Maravillado con todo el proceso, a veces cuando se conoce del tema, y como modo de desestres, se hace maravillas, mantener la mente y el cuerpo ocupado en actividades provechosas nutren el alma. y mas aun cuando todo sale como uno lo espera. felicidades por el video, muy inspirador.
Warning: 80% of comments is in Russian down below. Да, и этот тоже.
Man this is amazing! You did a fantastic job I really enjoyed this.
Amazing restoration
KAMA ,легендарный насос. Very good.
Eu adoro seus concertos .... Mostra que tudo até pode ter uma segunda chance! :)
In Soviet Union, water pumps YOU! :) Nice work!
I'm pretty sure in most country Water Pumps (People).. while in third world country You Pump and/or Carry Water... but I do get your In Soviet Russia joke.
Ого ! Наша " Кама" . Супер , мужик ! Спасибо за видео !
Excelente trabajo, una consulta que base o pintura recomiendas para pintar metales de secador rápido, ayuda.
This channel gives even myself hope it is possible!
That gas burner flame was not hot enough. If you have the possibility try with acetylene/oxygene. The goal should be, to get the outer part hot before the inner part heats up too much.
Thank you so much for the suggestion.
What @Kosekans said. When trying to 'free' a seized bolt, heat the outer casing, not the bolt. The outer casing will expand and release the bolt.
Spetsnaz 101 That‘s what I tried to point out.
Отлично 👍. Это насос Поток называется есть такой у меня производства 70 х годов. Надо тоже восстановить
What a good thing that comes back to life to something that would have ended up in the trash, good work. Que bueno eso de volver a la vida a algo que hubiera acabado en la basura, buen trabajo.
Cool! I’m from city, when this pump was made! 😎
Where*
Never disappointed
До сих пор дома такой есть.Исправно работает.
Сцуко! Точно вот такой же насос на даче валяется. Примерно с 1992 года))) Теперь точно не выкину! Спасибо. Прямо - Учебное пособие. 👍👍👍👍👍👍👍👍👍👍
Am I the only one who is slightly disappointed it didn’t get a new wooden base?
That and the fact he didn't add an On/ Off switch rather than it just going ham as soon as it's plugged in
Yeap sad/=
He did, why do you think he had to drill holes into the wood to attach the pump?
Burn
I'd make a rubber pad or rubber feet.
This pump costs 60 Soviet rubles. If recalculated at the current rate, you get $ 98.
ого. шож за калькулятор?
62 kopeyka for one $ ?
@@user-bc8pr5up2r согласно официальному курсу центробанка РФ.
@@AlexanderAtlas yes
Recuperei uma Grandfods mais ou menos assim estes dias... E sem todo este recurso. Ficou show...
Enjoyed watching your work, you vary skillful
Хренассе, наш советский насос! Он почти вечный.
Гост 84 года.. так что ему максимум 35 лет всего лишь))))
Всё что делалось В СССР, делалось на века.
у меня тётя на этом заводе работала, ветерана труда заслужила, квартиру подарили, я в ней живу щас))) говорила, что моторы матала. проверка электро моторов была такая, что япония и америка по качеству рядом не валялись.
Awesome job, i like you included earth clip 👍🏻
a beautiful pump has been restored by you
Thank you!
Thank you
I'm so glad you won the battle against the pipe!
1:36 Nice how the fuse is replaced with a piece of cable 😂
In Soviet Russia, safety is always number 2 priority!
Best bit was 6:05 when the pipe finally came loose. ahhhhh
So clean water pump.
Советское. Значит лучшее!
Had a pool pump fail due to a leak , problem was that specific part no longer exists ( tried Ebay gumtree etc.) Ended up buying a new one but if it can be restored then go for it...sometimes you cant though due to limited parts etc. Great video
Иш чего захотел своим заморским ключём открутить нашу трубу
Я в конце увидел название КАМА не поверил своим глазам.)
@@user-bk7pu5hl1u в названии написано советский насос
Вибрирует жёстко это чудо))
@@user-bk7pu5hl1u Ага. Сижу смотрю зарубежный канал. Думаю как на нашу "каму" похож. Опять наши слизали у иностранцев. А в конце вижу, что и правда "кама". Да ещё и живу в Перми. Их у нас делали.
Когда кожух пластмассовый достал, думал сейчас тоже его металлической насадкой шкуранёт :)
I love this video, My mind becomes calm.
GRACIAS por el amor a enseñar como resiclar y cuidar con eso el medio ambiente.
A better base and an on/off switch would have been the way to go, don't you think? Still a thumbs up...well done. Look forward to the next one. Out of curiosity [if its something you can share]...what does something like this '"rescued"' sell for?
Пескоструй нужен,самое то для таких деталюшек.
Te quedó hermosa, felicidades.
The sweet sound of success. Awesome job man.
The cathartic moment you're all looking for is at 6:00. No, no, no need to thank me.
Jesus, I thought he'd never make it!
оооооо КАМА, сколько я по... с этим насосом. Работал на всос с глубины 8 метров. Любая проблема с сальниками - воды нет. Сальники, сальники как вы меня ...
зато пломбир был вкусный
It's been a great renovation.. 👍👍👏👏👏
Ang galing naman