How to Remove Rust - 3 Different Ways to Completely Remove Rust! Rust Removal in Minutes!
Rust is a problem that EVERY car enthusiast will come across at some point during their restoration. In this video JD goes over the best ways to remove rust from metal!
MORE INFO: www.eastwood.com/paints/rust-...
Eastwood Rust Dissolver removes only the rust, and won't eat-away at the metal itself. Leaves the newly de-rusted metal ready to paint, plate or powder-coat.
Gentle enough for engine parts
Reusable
Removes about 5 sq. ft. of rust per quart
It will penetrate deep into the metal dissolving the rust in a few hours. Leaves metal ready to paint, plate or powder coat. So gentle, it’s suitable for engine parts and is harmless to copper, brass, aluminum, solder, lead, plastic, rubber, seals, wood, and vinyl. Will not remove sound paint.
Liquid rust Dissolver works as long as the surface is wet. Items that cannot be fully immersed due to size can be placed in the discharge stream of a commonly available small pump. One gallon de-rusts about 20 square feet of metal. The gel adheres to vertical surfaces and dissolves rust without having to submerse the metal in a tub or bucket. Ideal for quarter-panels, fenders and other vertical surfaces.
The Eastwood CONTOUR SCT® Patent #D814,261 other Patents Pending is a ruggedly built tool designed for many years of service.
WHY BUY AN EASTWOOD CONTOUR SCT®?
Heavy-Duty: Industrial construction with a powerful 9 amp motor and hardened spur metal gearbox.
Versatile: Strips paint, body fillers, rust and wood.
Value: Gives old metal surfaces a like-new finish
CONTOUR SCT® FEATURES
Fully adjustable RPM range from 1000-3700
Powerful 9 Amp double insulated motor
6 Speed position rotary knob
Includes one 4 inch wide by 4 inch diameter finishing drum
3 Year Warranty
Ready for any paint or rust stripping project, it features a drum guard enclosure and a rigidly mounted “D” handle for maximum safety. A high-torque, ball bearing supported motor and hardened spur gears provide smooth operation and long life. Speed is easily controlled with a 6 position rotary knob and ON/OFF trigger control.
The Eastwood Pneumatic Rotary Removal Tool is a powerful air tool that will effectively remove rust, paint, decals and more.
0:00 - Intro
0:26 - Mechanical Rust Removal
4:42 - Chemical Rust Removal
7:37 - Encapsulators
For more information on Eastwood products visit www.eastwood.com or stay connected with the team via:
Facebook - / eastwoodcompany
Instagram - / eastwoodco
Blog - www.eastwood.com/blog
Eastwood has everything you need to do the job right when you're restoring a car, truck or motorcycle - from welders to paint and everything in between.
That 500,000 is not coming soon enough!! Lol.. Another great video. Keep them coming. 👍🏻
We're getting there! Thanks for the kind words and we're going to keep them coming, for sure. 💪 Good luck winning the MIG180 at 500k subscribers! (If you're new here, make sure you subscribe to enter the giveaway!) -JD
@@eastwoodco 2000 more subscribers!
Best rust management video I have ever seen. Thanks!
Keep up the great work on the videos....always entertaining.... insightful.....
This is exactly (exactly) the info and product details I need. Keep it coming ! Thanks👍
You got it! -JD
Hi. I've watched so many of your videos primarily focusing on frame rust repair and welding. I took autobody and welding in high school over two decades ago and haven't been involved in the work since. I just bought an old 80 C10 patina and feel confident thru watching your videos to refresh my memory on body work, paint, rust repair and welding. Thanks for the videos, please keep them coming. Southeast Pennsylvania. Earned a sub
That is awesome!
Thank you Chris Fix 👍🏽
I love that grinder!
Nice. Good products.
Great video
great clip thank you. Anyone know the easiest way to prep old metal windows at my house?
These are great infomercials...
Great info, thanks!
Very good video🎉
Shout out to Eastwood. I could not paint my bare metal body panels ...tried the Eastwood Fast Etch. One month later...no flash rust. Worked GREAT. JUST BE SURE TO HAVE GOOD VENTILATION..AND WEAR A MASK. Watch their KZhead vids.....
Good video thanks
cool thanks
Does the chemical remover method also remove paint?
Thanks for the info
No problem 👍
That deburring tool is exactly what I need to grind an area clean for use of some panelbond. I can't see in the top lip that needs prep without use of a mirror.
Thank you, an interesting topic of metal processing and protection, I want your subscriber to take part in the drawing, what is needed for this?
All you need to do is subscribe to our channel. Once we hit 500,000 subscribers, we'll announce who won the MIG180! -JD
Brilliant presenter! 😎🇬🇧
Thanks for watching, Simon! -JD
So my wife bought me a used 2018 Silverado. It must have been from up north (we're from Dallas) as it has more undercarriage rust than we anticipated. Local mechanic said it was all surface rust. What would be the best product in your lineup for this kind of job? I plan on trying to tackle this job this spring. As I'm not very familiar with this kind of stuff I'm not sure what solution would be best? I know I'll be using a wired brush and a drill w/ wire brush attachment but not sure which chemical (acid vs convertor vs encapsulator) to use. Recommendations?
Sounds like the wire brush plus encapsulator should get you the results you're looking for. We just did that on the C10 project we have in the shop right now - similar story, old PA truck, frame was rusty but not rotted, we wire brush and encapsulated.
How did you miss electrolysis? The basis of that is used in so many other things, like gold plating, or other plating as well.
Electrolysis was originally in the script for this video. However, I wanted to really expand into that process. We want to keep the "In Minutes" series pretty snappy for you guys. Therefore, we decided to put electrolysis in its own video. Keep your eyes peeled for that one. Coming soon. -JD
@@eastwoodco it's honestly my favorite way. It's simple, it works, and it explains chemistry. Lol
Also, boiling in water will convert unstable red oxide ("rust") into stable black oxide.
Is the fast etch phosphoric acid based? Just wondering if it is useful for motorcycle tanks.
We actually have a kit just for this: www.eastwood.com/gas-tank-sealer-kits-eastwood-gas-tank-sealer.html
I have a question...if you have a rusty car and you cant afford to take it to shop to do a professional job like this..what can you do. we know there is no fix it all but just to further inhibit or to hinder further rust and anything to to help out. thanks
We have several levels of Rust Encapsulator that will do what you're looking for. www.eastwood.com/eastwood-black-rust-encapsulator-paint-over-rust.html
Say I used Fast Etch on a large area, Can I still use rust escapsulator on top of that??
Yes you could. Apply and then properly clean the fast etch off with pre painting prep, sand, and prep as if it's a normal body panel and apply top coatings.
No POR products?
👍
Citric acid works well.
Once you remove the rust with wire brush, what do you clean the metal with to prep it for encapsulator/paint?
Pre Painting Prep. www.eastwood.com/eastwood-pre-painting-prep.html -JD
Transmission fluid works amazing also for say rust under your truck from salt on the roads. It's not for something you plan on painting. It will stop the rust from doing more damage. For snow and salt you might have to do it 2 or 3 times a year. Pump sprayer or spray bottle. I have a car trailer metal deck and it was rusting away fast. So I prayed it with tranny fluid and it stopped it and I hit it 2 times a year. Try it.
im in new york...99 s-10 rusting away....you think this will hinder it further . i want to try this....thanks
Thanks
Will supperzilla remove rust
🤔 Good question....It claims it will. I recently bought some and gonna find out
Very disappointed with the SCT, bought 2 years ago, tried several drums…. It now collects dust..
What about the laser tool that disintegrates the rust?
We're working on bringing one of these in, they are just tough to make at an affordable price.
These how-to videos are great, but what happened to the project and restoration videos?
I have a project in the works that I really hope you're going to enjoy. The project involves a total teardown, and a top to bottom restoration, with some tasteful modifications along the way. HINT: You'll C it B-come something special -JD
@@eastwoodco I first subscribed to the Eastwood channel because of Matt's Cushman restoration project. Still waiting for him to finish it.
Sad you don't ship to Australia.
Or retail in aus
I work at a body shop Come on man . Small holes like that . I could have just put all purpose bondo that bonds with metal , wait till it gets hard and just sand it down . Boom ! Ready to paint in a few hours
Pls make video so that object is closed and clear.
Laser removal
Bought the SCT and several wheels. Very disappointed . And yes I bought the correct grits.
Lowest cost system is a kiddy pool full of muriatic acid. Used to create PH balance in pools. Any damage to metal is insignificant, and the rust will be gone long before then anyway. You can save hundreds of dollars over other systems Just be sure to neutralize with simple baking soda. Try the product on a small heavily rusted part, you wont believe how well it works for around $10 a gallon.
What do you do with the kiddie pool of muriatic acid when you are done?
@@KensGarage1 Took mine to one of the free household chemical disposal sites after I threw in 4 boxes of soda. I guess the rules are that they will take all chemicals that can be purchased by the general public. They wont take chems. from industry. You may want to check first. I had about 6 gallons, the pool alowed me to lay in large panels then brush over any areas that didnt immerse.
@@johnwick-ii6il Cool.Thanks for responding. Good to know.
@@KensGarage1 Just neutralize it with sodium hydroxide. The result is salt water. But be carefull when doing that! It is dangerous when doing it incorrectly. I use citric acid because it is much safer. It is much slower but as effective.
2:43 now THAT was a wire wheel!!
ketchup makes a great cheap rust remover gel.
Vinegar is cheaper. Its the acid you want
Molasses also
Oh you really nee to turn Subtitles on for this one. Lol.
don't worry that sandblaster didn't fuck up those Camaro panels no warpped shit here
My welder was just stolen last week when I went inside for a piss and grab another beer. I was in and out in less than two minutes
Sorry to hear that man, and like you? Very pizzed off too! VERY unsettling with the world today and lotta "people" in it.... TOO friggin lazy to work or entitled and OR completely wacked out on drugs. Yeah, even on the nicer days, I won't leave my shop doors open hardly at all, OR very long. LOTTA traffic out here on my county road and LOTTA lousy predators out there justa scoping at what everyone else has.... SMDH
try telling us how to do this stuff without purchasing eastwood tools
Well as a tool manufacturer that would be kinda tough. However you can always take as much or as little information you'd like from our videos and use any product you'd like.
Wire wheels don't remove heavy rust - they just polish the rust and make rust look like shiny metal.
Truth
Or I could just pay an mobile dustless blaster to do it for 400$ And have it done right. It takes an hour and a half.
Or you could buy our 100 lb. blaster, media, and safety equipment for less than $400, all in. Blasting isn't hard to do. The tools will pay for themself after blasting one part. You can do it. 💪 www.eastwood.com/ew-100lb-pressure-abrasive-blaster.html -JD
At what cost. Great for commercial applications. Prohibitive otherwise. I'll stay with old fashioned remedies. Rarely abide the "new and innovative" money-whoring technologies that are typically grossly overpriced.
There are tons of home-gamers using these methods. Myself included. Fast Etch is a miracle product and only costs 23.99/16 oz. The Contour SCT is 179. You can get a MIG90 welder for 250 bucks, all in. A blast cabinet is only $400. Sure, you could dunk your parts in vinegar or use electrolysis, but the pros use the methods that I mention in the video because they simply work better. -JD
Click Bate
For a video that’s supposed to be focused on rust removal, why are you showing paint removal? Thumbs down.
Shout out to Eastwood. I could not paint my bare metal body panels ...tried the Eastwood Fast Etch. One month later...no flash rust. Worked GREAT. JUST BE SURE TO HAVE GOOD VENTILATION..AND WEAR A MASK. Watch their KZhead vids.....