I just sit over the pipe and scrape down it at the angle its on. Ill stay just a fuzz above it and swipe it off into my ditch before I move back exposing it.
@damoncrockett93213 жыл бұрын
You Native brother? I think I hear it in your voice. I Brantford 6 Nations Ontario Canada. (Mohawk) I'm taking a heavy machinery course. Im a lil nervous. One false move and it can be disastrous. How you like it though? How's the money once you've become established?
@truman58384 жыл бұрын
No Polish. Money is good was better before Trudeau
@manhoer4 жыл бұрын
@@manhoer Damn you Trudeu! Will I see at least $26 to start ? Then Theres overtime too. Time and a half. I heard people making $100, 000 a year.
@truman58384 жыл бұрын
Depends if you pipeline or just construction pipeline in Alberta starts at 35 for green hands but no pipeline in Alberta soon
@manhoer4 жыл бұрын
it's a 290 deer.
@manhoer10 жыл бұрын
This is a very strange way to do this. I know u can't dig off the back end like u should, but in most bore holes this is not a option dew to bad ground conditions and or deep ditch depending on the bore angel. u could creat a shit hole that will never slope right if u are near a river doing what u did hear.
@tearharvester10 жыл бұрын
Any vids on. Reclamation
@brentdoiron66223 ай бұрын
There are a couple just click on the video tab and scroll down I can't remember what they are called one might be "finding cuts"
@manhoer3 ай бұрын
Why dont you used a Encon rotortilt???
@petersundell75468 жыл бұрын
Is that the gas line that took the coal burning power plants away
@johndorazio24004 жыл бұрын
Still working hard out there Barry?
@rickyboyz10065 жыл бұрын
Mostly foreman now
@manhoer5 жыл бұрын
Usually the engineer shorts a guy on heavy wall, obviously they don't care that much here
@twyeoman23385 жыл бұрын
If u ever see a bugered bore like this again try digging 1 side out ( ditch side first ) all the way to depth, then come to work side and side dig from OB up to the main line. Sid digging is not optimal ether however this will let u move your dirt only once. also since u have only exposed ditch side of the pipe u can save virgin ground to work off on work side.This is a big advantage as offten u will be on mats or working in running sand. more likely for a pipe hit, but half the work.
@tearharvester10 жыл бұрын
No handrail? Meh fekin amateurs 😉
@brownwarrior68675 жыл бұрын
u too slow.
@vitorlopes82697 жыл бұрын
Why dont you used a Encon rotortilt???
@petersundell75468 жыл бұрын
His company probably doesnt want to pay for one and they are not practical for pipeline use, for grading and small cuts sure they are great. On pipeline it would be worn to shit after 1000 hrs.
Love your vids man.
Thanks for the upload & remembering my request!
Liked the steps down into the pipe. Nice touch.
Great advise! thanks!
These videos are brilliant
Wow amazing!
you're a legend in your own mind bro
I just sit over the pipe and scrape down it at the angle its on. Ill stay just a fuzz above it and swipe it off into my ditch before I move back exposing it.
You Native brother? I think I hear it in your voice. I Brantford 6 Nations Ontario Canada. (Mohawk) I'm taking a heavy machinery course. Im a lil nervous. One false move and it can be disastrous. How you like it though? How's the money once you've become established?
No Polish. Money is good was better before Trudeau
@@manhoer Damn you Trudeu! Will I see at least $26 to start ? Then Theres overtime too. Time and a half. I heard people making $100, 000 a year.
Depends if you pipeline or just construction pipeline in Alberta starts at 35 for green hands but no pipeline in Alberta soon
it's a 290 deer.
This is a very strange way to do this. I know u can't dig off the back end like u should, but in most bore holes this is not a option dew to bad ground conditions and or deep ditch depending on the bore angel. u could creat a shit hole that will never slope right if u are near a river doing what u did hear.
Any vids on. Reclamation
There are a couple just click on the video tab and scroll down I can't remember what they are called one might be "finding cuts"
Why dont you used a Encon rotortilt???
Is that the gas line that took the coal burning power plants away
Still working hard out there Barry?
Mostly foreman now
Usually the engineer shorts a guy on heavy wall, obviously they don't care that much here
If u ever see a bugered bore like this again try digging 1 side out ( ditch side first ) all the way to depth, then come to work side and side dig from OB up to the main line. Sid digging is not optimal ether however this will let u move your dirt only once. also since u have only exposed ditch side of the pipe u can save virgin ground to work off on work side.This is a big advantage as offten u will be on mats or working in running sand. more likely for a pipe hit, but half the work.
No handrail? Meh fekin amateurs 😉
u too slow.
Why dont you used a Encon rotortilt???
His company probably doesnt want to pay for one and they are not practical for pipeline use, for grading and small cuts sure they are great. On pipeline it would be worn to shit after 1000 hrs.