Building the Ultimate Mazda 3 for 2 years in 21min
Building the Ultimate Mazda 3 Skyactiv in 21min
In this episode we'll go through the complete build process so far of the Mazda 3 Skyactiv!!
Thanks for Watching!!
If you want to follow the thread I made for more information about the Cx-5 transmission swap: www.mazda3revolution.com/thre...
Where I got my bushings: siberianbushing.ca/
___________________________________________________________________________________
Want to stay updated on what I'm doing behind the scenes?
Check out my website: drivingproduction.com
Check out my Instagram & Facebook page:
@drivingproduction
___________________________________________________________________________________
Here are some Amazon Affiliate links to some of the products I've mentioned in the video or used to make this video. By clicking them you're supporting the show, and helping me create more content at no extra cost to you.
U.S. Links:
Rear Motor Mount: amzn.to/3O0YWtO
Hood Struts: amzn.to/3rQpof4
"HKS" Grounding Kit: amzn.to/3uGowLJ
21-765C AEM Cold Air Intake: amzn.to/3nSSAA2
KIMISS Universal Shift Knob: amzn.to/3ACXoRC
Noico 80 mil sound deadening: amzn.to/3yyIGIV
Stop Tech Braided Brake lines (Front): amzn.to/3ABDmah
Stop Tech Braided Brake lines (Back): amzn.to/3aqIp2u
Blue Burnt Exhaust Tip: B08BFGMGNL
SEALIGHT H11 LED (Low Beam):
Fahren 9005/HB3 LED (High Beams):
LUYED 2 X 1700 Lumens (Reverse Light): amzn.to/3PeZnj9
LUYED 2 X 900 Lumens (Signal + Brake Light): amzn.to/3nUbxCg
VViViD Yellow Headlight: amzn.to/3yvedLB
Canada Links:
Rear Motor Mount: amzn.to/44XihmwHood Struts:
Hood Struts: amzn.to/3T7ptHm
"HKS" Grounding Kit: amzn.to/3RlGDQN
KIMISS Universal Shift Knob: amzn.to/3RspGEC
Noico 80 mil sound deadening: amzn.to/3AH0R1K
Stop Tech Braided Brake lines (Front): amzn.to/3IuiovL
Stop Tech Braided Brake lines (Back): amzn.to/3bXaUoR
Blue Burnt Exhaust Tip: amzn.to/3AFmH5B
SEALIGHT H11 LED (Low Beam): amzn.to/3yX4oI0
Fahren 9005/HB3 LED (High Beams): amzn.to/3Rqu7zo
LUYED 2 X 1700 Lumens (Reverse Light): amzn.to/3nRB7YJ
LUYED 2 X 900 Lumens (Signal + Brake Light): amzn.to/3nUvyJc
VViViD XPO Golden Yellow Headlight: amzn.to/3RqZU3e
Caliper Paint Red Metal Cast: amzn.to/3OVJRJ3
Here is the link for the Mazdaspeed brake bushings:
damondmotorsports.com/product...
Here is the link for the Mazda3/Mazda5 brake bushings:
damondmotorsports.com/collect...
My Camera Gear:
U.S Links:
Nikon D3200: amzn.to/3uGjT4j
GoPro Hero5: amzn.to/3yws7gp
Lapel Mic: amzn.to/3PiBCXy
Canada Links:
Nikon D3200: amzn.to/3OT1jhs
GoPro Hero5: amzn.to/3nTWxnW
Lapel Mic: amzn.to/3PciRou
Where I get the Royalty Free Music for the videos:
artlist.io/Driving-1567032
Thanks for the Support!!!
DISCLAIMER:
Driving Production videos are for entertainment purposes. Don't perform any modifications on your vehicle that will void your warranty or violate local laws. I assume no liability for damage on your vehicle, property or injury as a result of any of the information contained in this video. Use the information provided at your own risk.
Celestial Blue ! Still in love with my Mazda 3 since 2015 ! Amazing color and car !
Yes!! I love this blue so much too! Looks awesome! Thanks for sharing!
It’s a MazdaSkyactivSpeed3
Haha Yes at this point it is!! 👍
Great video, really enjoyed iCe modification as it progressed, just picked one up 2 weeks ago 08 already making my list. Been a automotive tech for years, now the Mazda gets my sole attention . Seeing it all from the floor let's me know so much on this little Mazda. Again great video 👍
Thanks! I'm glad you liked the video and that it helped you for your build! I do love the look of the 08 a lot more, and pretty much all the suspension stuff I did is pretty much the same on the first gens. 👍
Beautiful video bro well done 🤝🏾 Love the build
Thanks man!! I appreciate the support!! 👍
Mannn you are a legend.. I have a 2012 skyactiv GT with 147k now, I've done some work on her myself but not even close to the level you're going at. Really inspiring to see all that you did by yourself, I hope to make mine as good as yours someday.
Thanks man! That's great keep up the mods! I've been moding this platform for years to get to this point! 👍
Me encanta te ha quedado brutal. Un saludo desde España, Great built
¡Gracias!
Great build!
Thanks! I'm glad you like it!
Outstanding video! Wow
Glad you liked it!
Your skills are very good. This MAZDA3 must be happy.Comment from Japan🇯🇵
Arigatō! Thank you very much! I appreciate the support!
You're super-gutsy to try to swap transmissions just to see if they would fit. Hats off to you! I just picked up a stock 2013 Mazda 3 sport auto in Forida. It's been declared salvage not once, but twice. At least the underside has zero rust.
Thanks!! Since it's a pretty niche platform there's not too much information on swaps like this so I just had to take a gamble and it all worked out in the end! Twice salvage is cray, but still having no rust on the car would make it soo nice to work with!! 👍
I'm screaming at this!
Same!
incredible!
Thank you!
Bravo👏
Thanks!
This video is great! I have the same car and I would love to mod at least half of what you did. I wonder where did you learn how to take out each and every part out and change/replace it? I found no guides on net. Btw, how long it took you to do all of this? Wonderful job, bro! Love the car!
Thanks!! I really appreciate your feedback! I bought this Mazda 3 in January 2022 and have been building it since then. Before that I had the same Mazda 3 (white) but in Auto that you can also find on the channel, and I was building that chassis before this one. Most of the stuff I learn along the way to do, I have been working on cars since before I had a license haha and I love learning new things and how cars work. Thanks again! I really appreciate the support! 😃
Minty video! 10/10, so what's next?
Thanks! Happy you liked it! There's always more mods to do! There's the Speed 3 I need to finish , and new platforms to come! 👍
@@DrivingProduction check out motordrivegroup sams midnight purple 2014 Mazda 3. It’s pretty sick and the best mod imo is his steering wheel. Definitely worth witnessing
What throttle body would you use for a non sky activate 2.0?
I'm not sure if you can use the TB from the 2.3 or 2.5 MZR engine and if they are upgrades for the 2.0, but I would look into that if I were you. 👍
Mine isn’t nearly as cool as this but I’m on my journey to install everything I can find on my 2012 Skyactiv. So far: 2.5 GT wing Speed3 rear sway bar Speed3 axle back and bumper 2.5 sideskirts Speed3 red stitch arm rest and shift boot Ford focus electric rear motor mount Window visors 2.5 throttle body Coming up: Turn signal mirrors Fog lights Heated seats from a 2.5
That's awesome! I'm sure it looks great!! Keep it up!
💪🏽
Would you recommend changing the bushings in already installed parts? I have changed some suspension parts recently and they started to get damaged but i don't want to buy in new.
If they're still in good condition I would. The main reason I didn't do that was because of the amount of rust on my previous components. But if you changed them recently should be good to just replace the bushings! 👍
Buen video!!!
¡Gracias!
Hey man, can you please tell me where did you get the wing from? Im looking for a mazdaspeed wing for my mazda3 and i can t find anything.
I got it from a local junkyard, but I see them pretty regularly on FB Marketplace for Mazdaspeed part outs.
where did you get the ground kit? i can only find info on 1st gen mazda 3
There's a link in the description you can go check out. 👍
Where did you find that spoiler? Ive been looking for a Mazdaspeed3 spoiler for my skyactive forever.
I was fortunate to find one in a local junkyard, but I see them all the time on FB marketplace in Mazdaspeed part outs
The rim are 17" from mazda mx5 ?
Yes they are off a 2012 Mazda Mx-5 Special Edition
Where did you get that radio? I’ve been looking for one with analog volume, and here I only find touch buttons and that sucks!!!
Yes I feel the same about the touch screens! That's why I went with this one, unfortunately I think Eonon discontinued this model as I don't see it on their website anymore.
Hola espero te encuentres bien, disculpa donde conseguiste los bujes de poliuretano para la suspensión los amarillos
Hola, de aquí conseguí los casquillos : siberianbushing.com/
Hello, I hope you can help me, I am in my project with my standard Mazda 2.5 and I would like to know if the speed transmission fits my 2.5
If you have the MZR 2.5 the Speed transmission bolts up, you just need a Mazdaspeed clutch/flywheel plus the shift cables. I think you might need a few other things, but it's been done before there's information on the forums about it.
Why did you remove the antenna just to bondo the hole and sanded the roof down, repainted the entire thing the same color and then wrapped it black? 😂
I figured that if I ever removed the wrap it would be blue like the car, but it was also one of those moments when I asked myself why did I paint it and not just wrap it like you said 😅😂
Que buen trabajo
Gracias! 👍
en el minuto 1, porque le pusiste tantos cables tierra ?. trabajo espectacular amigo
I think the connected some wires from headlights and fog lights then connected it to battery
I made 2 video about it, you can check it out here: kzhead.info/sun/Zqtmds6icGiJnGw/bejne.html
I looked at that cold air intake and it’s no longer available/instock and I looked all over Amazon and I couldn’t find one like that for the same price. Any suggestions?
Also love the videos. Super helpful since I have a sky active too😂
Thanks! I'm glad you enjoyed the video!! Yes unfortunately they don't make them anymore, I was lucky to find one used maybe look on eBay on used listing or on FB Marketplace. Or custom make one with piping from another intake. Hope this helps! 👍
how much money have you spend for this mazda?
Great question! I'm not quite sure at this point, I would say in the $4000-$5000 of mods.
Bue video. 100 puntos
Gracias!! 👍
Any link to the spoiler or what spoiler is it? Pls
MPS Spoiler
It was a used spoiler from a Mazdaspeed 3 that was in a local junk yard
All that work and a check engine light is lite up? Do you know the cargo space on the Mazda 3 is smaller on the 2nd and 3rd generation hatchbacks versus a 1st gen? I have a 1st gen looking to upgrade to a 2nd or 3rd gen Mazda 3?
Yes 😅 the CEL was on because of a small evap leak that came on and off. For cargo space 1st & 2ng gens are pretty close as they are based off the same platform, the 3rd gens are as big but you loose in height because the hatch is more curved then the other ones. 4th gens are the smallest hatch overall.
Whaoo is perfect you Job..
Thanks! Glad you liked the build!
where does this rear spoiler come from?
Can off a Mazdaspeed 3, got it at a local junkyard
Зачем менять руль, тем более от предыдущего кузова, там много не понятного
в основном на вид руль BL Mazda 3 выглядит не очень, поэтому и поменял
a lot of rust on those cars :( im thinking to buy one, but when i see the rust..
I know it get's bad where I live really quickly with the salt on the roads.
Nice content, but don't get wash your engine.
Thanks!! It just make the engine bay cleaner and nicer!
Ah yes a speed 3 with the power of ½ speed 3. Looks great but i dont understand the time, effort and money put into it.
It’s a great DD with at least twice the reliability and fuel economy.
Also most of them have not been beat to hell it’s easy to find a good Skyactiv example with low miles for cheap.
Like mention in the other comment, it makes for a great DD, it's been rock solid reliable and get amazing gas mileage. . . on the other hand my actual Speed 3 had 0% of the power my Mazda 3 makes because it has a blown engine like most Speed 3 😆😂