KZhead
Тәжірибелік нұсқаулар және стиль

I have successfully started an engine that has been forgotten for many years

MR HO THANH CHE
2023 ж. 28 Нау.
1 869 551 Рет қаралды
Жүктеу

COPYRIGHT BY TRAN LONG HO.
Original Facebook fanpage / thánh-chế-mr-hồ-109271...
Main Gmail - longho.tranccc@gmail.com
Name - TRAN LONG HO
I have successfully started an engine that has been neglected for many years
tôi đã khôi phục lại thành công một động cơ đã bị lãng quên nhiều năm trên bờ biển

Пікірлер

  • Nissan motor company should sponsor him a complete workshop, and use this as a commercial on their engine`s. impressive work!! :)

    @berikdahl@berikdahl Жыл бұрын

    • Просто двигатели Nissan на столько выносливые что их не только море не может убить но и кривые руки

      @gar_age29@gar_age29 Жыл бұрын

    • I think I am going to go out and find me an old 4 cylinder Nissan Diesel engine now...I just cannot believe my eyes and ears on this one. To come so far from where it started off as and run with no oil or water all while leaking diesel like a siv. I myself have been a mechanic for 20 years...I simply do not have this man's magical talent. 😂

      @CloudHindlen@CloudHindlen Жыл бұрын

    • Actually he is the owner of Nissan company..this is a secret between us

      @MrPagecat@MrPagecat4 ай бұрын

    • They should also gifted him a Navara so he have a proper truck to go out and work!!

      @avcomth@avcomthАй бұрын

  • Phải có sức khỏe, học thức, niềm đam mê và sự kiên nhẫn mới làm được những công việc phục hồi động cơ hư hỏng phức tạp như thế này. Bạn quả là một nhân tài trẻ đáng quý của Việt Nam!

    @NMT1975@NMT19754 ай бұрын

    • 😊😊

      @NurFiani-dz1ze@NurFiani-dz1ze2 ай бұрын

  • Привет, брат! Не перестаёшь удивлять золотыми руками!) С любовью из России!))

    @igorvoronin8952@igorvoronin8952 Жыл бұрын

  • I’m a mechanic from south wales uk , I wish I was patient like you , I’m very impressed with your hard work

    @zakariashah8993@zakariashah8993 Жыл бұрын

    • I’m sorry but this has to be fake

      @26715@26715Ай бұрын

    • @26715 I was WAITING for some drooling moron to make that stupid comment. Thanks for not disappointing, fool.

      @MARRANCA2@MARRANCA2Ай бұрын

  • Nissan should buy the engine and put it into their museum (firing it up regulary). What an amazing job!

    @joachimemand1687@joachimemand1687 Жыл бұрын

  • Thank you for your interest and comment❤ cảm ơn các cô chú anh chị và các bạn đã quan tâm và theo dõi ❤

    @Mr_Ho@Mr_Ho Жыл бұрын

    • چرا روغن دیگه نریختین داخلش؟؟

      @fatimasaidabadi123@fatimasaidabadi1237 ай бұрын

  • That engine was dead to rights, but you pulled out a miracle and brought it back to life. I was impressed with the whole project!

    @brianschott8162@brianschott8162Ай бұрын

  • Bạn ko những giỏi mà còn có tinh thần bất diệt, ko có gì làm Bạn chùn bước. Mình rất rất hâm mộ Bạn ❤❤❤

    @iemle2174@iemle21748 ай бұрын

  • I'm a mechanic in the US and brother I'm absolutely impressed with your abilities. Highly resourceful and determined.

    @anmous69@anmous69 Жыл бұрын

    • 😅

      @fernandoortegavernet627@fernandoortegavernet627 Жыл бұрын

    • at least he forgot to torque the bolts

      @vuvinh2032@vuvinh203210 ай бұрын

    • ​@@vuvinh2032he didn't forget, he used the good'ol good and tight haha

      @damiann4734@damiann47342 ай бұрын

    • He should be a mechanic in the states. He would blow most out of the water with his talents.

      @kevfit4333@kevfit43332 ай бұрын

  • Прлучил большое удовольствие от просмотра! Спасибо за ваш труд! Привет из России!☺️

    @PavelNSK@PavelNSK Жыл бұрын

    • Thank you for your interest and comment

      @Mr_Ho@Mr_Ho Жыл бұрын

    • @@Mr_Ho Россия здесь, мы смотрим вас! Спасибо за залипательный контент!

      @snowdannat@snowdannat Жыл бұрын

    • @@snowdannat не стыдно признаваться что ты из Соссии? Это же сейчас как клеймо фашиста.

      @kotovsk66@kotovsk66 Жыл бұрын

    • @@snowdannat росія в сраці, хіба що

      @CircleViolence@CircleViolence Жыл бұрын

    • Какой нахер труд, да это пздц,разобрал почистил собрал, где замер зазоров, где сцук Динамо метрической ключ, да блин ремень ГРМ и ролики это одноразовые вещи, где прокладка гбц, где масло насос, где масло, что эт за пздц

      @gar_age29@gar_age29 Жыл бұрын

  • Проделана большая работа по восстановлению этого хлама , это сколько нужно иметь терпения и энтузиазма. Респект к тебе дружище !

    @fly1958@fly1958 Жыл бұрын

    • Он как археолог рылся в нем))

      @dimkacras@dimkacras5 ай бұрын

    • ​Рылся рылся и завёл без масла и охлаждайки)​@@dimkacras

      @rostislavchuruta7024@rostislavchuruta70242 ай бұрын

    • Этот двигатель все равное не для эксплуатации, поэтому какая разница))

      @lifefullHD@lifefullHDАй бұрын

  • Спасибо большое!! Видна работа, а не замена на новое, понятно, что прокладки сгнили, везде песок, всё промыто, прочищено, смазано и налажено!! Очень приятно, прям тепло на душе!! Золотые руки!!

    @VasjaLar@VasjaLar Жыл бұрын

    • Пзазазазвх надеюсь это сарказм?

      @Devariant99@Devariant992 ай бұрын

    • @@Devariant99 а ну ещё супротэк конечно же, бро 👍😆

      @VasjaLar@VasjaLar2 ай бұрын

  • Wouldn't have touched that engine with a ten foot pole. You're a legend.

    @brendanhenderson6999@brendanhenderson6999 Жыл бұрын

    • Felt the same way, not even sure it would have been worth adding to the scrap pile as bad as it was looking. Most impressive to have had the patience to bring it back

      @tifreak8x@tifreak8x Жыл бұрын

    • It'll blow up in 30 minutes....

      @matthiasweigel311@matthiasweigel311 Жыл бұрын

    • he didn't even change the O ring on the pump....

      @matthiasweigel311@matthiasweigel311 Жыл бұрын

    • @@matthiasweigel311 It doesn’t matter, many components were totally destroyed by the sea water and air, and yet he achieved what he said he was going to do, he got the engine to run. It was entertaining to watch, a project I most certainly would not have ever contemplated. Well done to him, and I hope he gets paid well off YT for his efforts.

      @krazytroutcatcher@krazytroutcatcher Жыл бұрын

    • It was an extreme gamble with the cylinder bore and bearing surfaces, but his machining skills made the difference👍

      @Orbacron@Orbacron Жыл бұрын

  • Watched all three parts. Excellent rebuild!!! 🙏😲

    @markbooe205@markbooe205 Жыл бұрын

  • Tôi thích những video mà bạn làm, người anh em, tôi muốn nó giống như bạn đã tự làm mọi thứ, lời chào từ Indonesia🙏🙏

    @rommyramdhany1971@rommyramdhany197111 ай бұрын

  • Отличный мастер- механник! Достоен ввсочайшего уважения!❤❤❤!!!

    @user-os3vj1cj5j@user-os3vj1cj5j9 ай бұрын

  • Смотрел и ждал с превеликим удовольствием. Респект и уважение на сложный проделанный путь👍👍👍

    @user-lc7it2nt5y@user-lc7it2nt5y Жыл бұрын

  • And he did not disappoint. I’m impressed with the techniques in removing rusty bolts. I’ve repaired a water damaged engine before but this takes it to a whole new level. The amount of the old engine you were able to re-use is staggering. Electrolysis is another way of removing rust. Well done.

    @alansailing1387@alansailing1387 Жыл бұрын

    • I hope you understand that restoration like this - for video and restoration for normal work - is two different restoration

      @CircleViolence@CircleViolence Жыл бұрын

    • ​@@CircleViolence Это для вас😊 Для них, это нормально будет работать и выполнять свои функции.😊

      @alextsoy5047@alextsoy5047 Жыл бұрын

    • んー素晴らしい、の一言です。

      @user-ew7hc3pd1s@user-ew7hc3pd1s Жыл бұрын

    • @@CircleViolence I understand that. The state of the injector pump was not going to last. Just the mere fact that he managed to get the engine to run is impressive given the state of it.

      @alansailing1387@alansailing138710 ай бұрын

    • yang terpenting dia bisa menghidupkan mesin tua kembali

      @WsM_TECH@WsM_TECH5 ай бұрын

  • Boa noite. Sou brasileiro e acompanho seu maravilhoso trabalho no canal. Você é um gênio. Um grande abraço bem brasileiro❤❤🎉😊

    @narcisofernandes7882@narcisofernandes78829 ай бұрын

  • già rồi mà khi cem tôi đã quá ngưỡng mộ, một tài năng khó tìm có sau này, chúc em luôn sức khoẻ

    @LoiNguyen-re7zj@LoiNguyen-re7zj11 ай бұрын

    • My

      @harigovind1534@harigovind15347 ай бұрын

    • ​@@harigovind1534รึ

      @princelife6457@princelife64575 ай бұрын

    • @@harigovind1534 llllkllll Pm Ol L L L Oopmol L Lpm LM Lo 9l O(｡≧ʕ•ﻌ•ʔ Pl

      @marshalmurmu8291@marshalmurmu82915 ай бұрын

    • L ≧ω≦:)):-$:-$o

      @marshalmurmu8291@marshalmurmu82915 ай бұрын

  • I am blown away that you got this started. Best part is there wasn't a torque wrench in sight.

    @overzealousmaverik@overzealousmaverik Жыл бұрын

    • yeah, is not gonna durable enought

      @vuvinh2032@vuvinh2032 Жыл бұрын

  • Это уже из области магии- оживить двигатель в ТАКОМ состоянии!Супер!)

    @user-px5br7ug2d@user-px5br7ug2d Жыл бұрын

    • совершенно волшебно, но при этом абсолютно бессмысленно. ибо жизни такому мотору до первой нагрузки

      @6o6ep_B_Tpycax@6o6ep_B_Tpycax Жыл бұрын

    • @@6o6ep_B_Tpycax думаю с их климатом все таки режим более щадящий нежели с работой в перепадах на зимний период

      @axelroz@axelroz Жыл бұрын

    • Можно было этого не делать, а супротека плеснуть

      @muchachoevumoralex@muchachoevumoralex Жыл бұрын

    • @@6o6ep_B_Tpycax хорошо если он хотя бы минуту проработал

      @user-qo6kk9cb2k@user-qo6kk9cb2k Жыл бұрын

    • Судя по всему движок разъело солёной водой, такой труд ложить ради минуты славы сомнительное удовольствие

      @hanterfix2368@hanterfix2368 Жыл бұрын

  • To say that was amazing is an understatement, the amount of work that you must have put in to get that engine running must have been very long. You are an incredibly talented and knowledgeable man.

    @rickvaiBBB@rickvaiBBB11 ай бұрын

  • Absolutely amazing work! If I was able to, I'd employ you as an engineer any day! You're clearly the man to know during the apocalypse. Nissan should sponsor you with a fully kitted out workshop. Again, absolutely amazing job! 👍👍

    @JonW77@JonW77 Жыл бұрын

  • *_Another perfect restoration. Thank you for sharing it. Keep up the fantastic work._*

    @RestorationVideo@RestorationVideo Жыл бұрын

  • Это жесть. Мотор поднят для одного запуска, больше всего мне было интересно про ремень грм, сальники и прокладки, думал, купит ли он хоть одну новую деталь)) но нет, всё нормально 😅 Однозначный лайк за проделанную (но к сожалению бессмысленную работу)! Думаю монетизация от ютуба всё оправдывает, но просто жалко труд, т.к. это творение просто в чермет пойдёт в итоге

    @kirill5787@kirill5787 Жыл бұрын

    • Поршни другие.

      @velzevul88@velzevul88 Жыл бұрын

    • Поддон тоже, тот сгнил полностью

      @user-sd6bu6uv3l@user-sd6bu6uv3l Жыл бұрын

    • Так он от монетизации и кормится. Пошёл купил такойже бу и вуаля.

      @dimfil1460@dimfil1460 Жыл бұрын

    • Особенно тнвд. Плунжера так не будут работать там Пренцезионные поверхности.

      @dimfil1460@dimfil1460 Жыл бұрын

    • распредвал стоит на этот двигатель 83к

      @gennadiydorjiev2957@gennadiydorjiev29579 ай бұрын

  • Quando eu vi, logo pensei que era mais fácil vender como sucata. Impressionante o trabalho desse rapaz. Ressuscitou defunto!

    @joseolimpiosilvaneto4609@joseolimpiosilvaneto460911 ай бұрын

  • Thank you very much. Most mechanic workshops do not have this experience. Rather, they only replace parts, and most of the time they are not really the cause of the problem. Thank you, great work.

    @yassinalmohammad7014@yassinalmohammad70143 ай бұрын

  • Золотые руки у тебя в наше время редкость.👍

    @alexanderleimann6021@alexanderleimann6021 Жыл бұрын

    • Надеюсь это сарказм.....?

      @user-ni8yx5ux4q@user-ni8yx5ux4q11 ай бұрын

    • Он без масла его запустил, этот мотор труп

      @turikraspil@turikraspil2 ай бұрын

    • А крышка тебя не смущает? 🤣🤣🤣🤣🤣

      @Devariant99@Devariant992 ай бұрын

  • just astonishing ! ... Mr Ho has to be the best engine restorer on KZhead

    @SaltyMcBoatFace@SaltyMcBoatFace Жыл бұрын

  • Astounding, super impressive in this disposable age. This is the guy that will keep everything working in the apocalypse

    @robertsimpson3635@robertsimpson3635 Жыл бұрын

  • Колосальный труд! Да еще изготовить прокладки с кольцами, востановить подшипники, всякие крышечки и тому подобное изготовить на коленке.☺

    @user-pq5uf1ku1q@user-pq5uf1ku1q Жыл бұрын

  • Great Video, Loved it! and thank you for taking us along on this restoration, Mark from Australia! 😀

    @markparker2873@markparker2873 Жыл бұрын

  • This was the most impressive engine restoration I've ever seen in my life

    @accordinglyryan@accordinglyryan Жыл бұрын

    • These videos are fake, theres countless YT videos showing how they do it.

      @uhtred7860@uhtred7860 Жыл бұрын

    • ​@@uhtred7860That's lie.

      @Paces2@Paces210 ай бұрын

    • @@uhtred7860 I don’t think this is fake dude, he just got the engine to run for a couple minutes for the video and that’s it. How would you fake that

      @AC-vx3jz@AC-vx3jz3 ай бұрын

    • ​@@uhtred7860the Indians electricity ones are fake. Hard to fake with an engine while the valve cover still showing leaks everywhere lol

      @damiann4734@damiann47342 ай бұрын

    • @@damiann4734 There are a lot of videos on YT showing how they fake, this type is called a "mild fakes" as opposed too "strong fakes". Lets be honest, to call this a restoration is extremely misleading.

      @uhtred7860@uhtred78602 ай бұрын

  • У меня нет слов)) люди новые моторы не могут нормально собрать) золотые руки у тебя!

    @AK-fc1ds@AK-fc1ds Жыл бұрын

  • Well, i have never seen ANYTHING like that in my life!!! It puts into perspective what i have to do to my 1942 International W6 tractor engine completely!! Well done my friend👍👍👍 Just dont show the END of the video at the beginning in future, it spoils it a bit👍

    @WeeShoeyDugless@WeeShoeyDugless Жыл бұрын

  • I really hope this is real. The thought of mr Ho being this skilled just makes me feel good about the world. Also, pro tip: watch it at half speed, the enjoyment lasts twice as long

    @beachthor1@beachthor1 Жыл бұрын

    • The engine was real real crusty. The restoration was real at least.

      @ravenyangwenda368@ravenyangwenda368 Жыл бұрын

    • In what way could this not be real

      @devando223@devando223 Жыл бұрын

    • The hard work was definitely very real, the piston he replaced was unavoidable and with a few more parts to get the oiling system working again it could no doubt be run for long periods but I don't think that was the point, I think the point was to get it to run again and that he did. I thought it was very cool and entertaining to watch, I especially liked the bit with the old bloke making the head gasket.

      @-TheRealChris@-TheRealChris Жыл бұрын

  • Не, ну это просто колоссальный труд 💪🏻 Мое почтение! Как всегда получил огромное удовольствие от просмотра❤️🔥

    @Bad_Asvensen@Bad_Asvensen Жыл бұрын

  • Reo hò! Reo hò! Reo hò! Xin chúc mừng nồng nhiệt rất nhiều sự ngưỡng mộ và trên hết: Cảm ơn bạn!

    @yves-noel-mariegonnet1043@yves-noel-mariegonnet10439 ай бұрын

  • You are not just a technician you are an artist...

    @michaelmountasserachab2503@michaelmountasserachab25038 ай бұрын

  • Nếu lấy hình tượng động cơ như một cơ thể, thì "cơ thể" này chẳng những đã "chết" mà còn đang ở tình trạng "phân hủy" nặng. Bạn là một siêu tài năng làm sống lại cái "xác' đã phân hủy. Bái phục

    @uttruongmuoi1903@uttruongmuoi19038 ай бұрын

  • This does not get old, massive respect 👍👏👏👏👏,

    @markoverton5858@markoverton5858 Жыл бұрын

  • This guy loves machines and exploring ways to rehab the seemingly impossible! Fabricating his owner head gasket alone is impressive! I wonder how the engine is to be later put to use.

    @paulaanthis4031@paulaanthis4031 Жыл бұрын

  • Nice. Great job. Boring thing in process but successful

    @user-wc2em9bb7b@user-wc2em9bb7b Жыл бұрын

  • I honestly wasn't sure if your videos are real or not because you tackle such impossible looking projects that seem gone past the point of no return, , and this one definitely is real. Great work ! My God, it's like a brand new NISSAN made in Japan motor for FREE, just add time and experience. You're a legend.

    @michaelb.42112@michaelb.42112 Жыл бұрын

  • O melhor vídeo já feito aqui no KZhead parabéns meu amigo 👏✌️🔥🚀

    @sgtariel@sgtariel Жыл бұрын

  • I was amazed that they could fix the engine in such a miserable condition and get it running. And I was even more surprised that the engine was a Nissan engine. Thank you for this wonderful video full of surprises.

    @odmsboon@odmsboon Жыл бұрын

  • Did the timing belt failed at the end????? Oh god... Amazing restoration, great job!

    @adriannp.@adriannp. Жыл бұрын

  • Золотые у тебя руки дружище 👍😎

    @user-rj5hh5ri3b@user-rj5hh5ri3b Жыл бұрын

  • This Guy's Head is beyond repair. Using which anything can be restored. Hats off to you.... maniac..

    @ailiahaider@ailiahaider11 ай бұрын

  • Timing belt broke? All for naught? Great video. Just the fuel pump alone, let alone the head gasket.

    @chipedgar2845@chipedgar28455 ай бұрын

  • Excellent work.. as a marine engineer myself i thought the job was impossible. And i thank you as i picked up some nice techniques i could use

    @heraldcaberos3594@heraldcaberos3594 Жыл бұрын

  • Irmão e disso que eu falo recuperar um motor abandonado , travado e todo enferrujado , você operou um verdadeiro milagre , gostei , parabéns , estou impressionado com seu trabalho , que não foi facil , agora e pintar que fica mais top ainda , parabéns , show , excelente trabalho

    @erikbraguim4288@erikbraguim4288 Жыл бұрын

    • partiu a correia 2 minutos depois de pegar mas esta top só falta pintar....

      @mgtworld@mgtworld Жыл бұрын

    • Parece bomba injetora bosch

      @JoseSantos-cd5uu@JoseSantos-cd5uu7 ай бұрын

  • Quá giỏi ,coi đi coi lại vẫn thấy khâm phục . Chúc a luôn nhiều sk và thành công

    @ThuanNguyen-jp4gb@ThuanNguyen-jp4gb11 ай бұрын

  • This is impressive ! Great patience and mechanic mind. Nobody would make that rusted ball of junk to run, but only you..wow !

    @MB031@MB0319 ай бұрын

  • Just amazing, the talent and most likely without a formal education in motor mechanics. All the best to you fellow.

    @haroldwonder446@haroldwonder446 Жыл бұрын

  • The tongue is speechless when I saw it for the first time. I said it is impossible to restart that engine because of the rusty state it was in because of sea water. But with will and love for work, experience, mastery and skill, the engine is back to work again. You deserve a million likes.🎉🎉🎉🎉🎉🎉🎉

    @aliremla7885@aliremla7885 Жыл бұрын

  • ABSOLUTELY AMAZING! I've never seen anyone resurrect an engine that far gone! IMPRESSIVE!!!👍 Well Done Mate!

    @ussdiscovery6912@ussdiscovery6912 Жыл бұрын

  • I didn't believe that you would be able to restore such a rusty engine.... Well done, good job!

    @sertakisss@sertakisss7 ай бұрын

  • You are the best at what you do. Very excellent work.

    @tomemody6685@tomemody66859 ай бұрын

  • This guy is a true master at what he does. 👏🙏

    @brianoutdoorlife7788@brianoutdoorlife7788 Жыл бұрын

  • thanks to this video, I believe now that nearly any thing can be restored, even looking like a absolutely hopeless ❤ thanks for inspiration

    @user-sq8qi2kd4f@user-sq8qi2kd4f11 ай бұрын

  • After I die please call Mr Ho to bring me back to life...He should be a heart surgeon not a junk restorer! Genius!

    @user-em4hv5fq3k@user-em4hv5fq3k3 ай бұрын

  • Damn that is impressive work. I know it isn't running perfectly but considering the shape that engine was in just running is awsome. Thank you for posting.

    @laserbeam002@laserbeam00211 ай бұрын

  • I’m more impressed how you’ve remembered to put it all back together. Only issue with a wire wheel is it pits everything.

    @kman6482@kman6482 Жыл бұрын

  • I can imagine all the hours of work…it is very impressive

    @spencerrobinson2719@spencerrobinson2719 Жыл бұрын

  • После просмотра видео пошел и заказал новый ГРМ. Хотя, стоп - нам даже не показали способ чудесного исцеления съеденных коррозией поршней

    @muchachoevumoralex@muchachoevumoralex Жыл бұрын

  • I can tell you most people would not even give that a second look. I have worked with a lot of Rusty stuff beings that I live in what we called the Rust Belt here in America the Northeast where salt is used on the roads in the winter time and everything just degrades. I have to say Sir that this is probably one of the most impressive videos I have ever watched, but then again I am impressed by most of your videos. That's why I watch! Mister Hollow keep doing what you do

    @MakinEndsMeet69@MakinEndsMeet6910 ай бұрын

  • That's nuts! I'm surprised it ran at all! Hopefully after you build a little stand for it, hookup some cooling water and give it another go, it will bed the rings and valves in and run smoothly.

    @MrToranaGuy@MrToranaGuy Жыл бұрын

  • best rescue/rebuild video I have seen yet on KZhead. Well done, sir! Subbed..

    @bobgrob4@bobgrob4 Жыл бұрын

  • How on earth did dirt get in behind the piston rings? Amazing job too 👏

    @danielstorey3696@danielstorey3696 Жыл бұрын

  • Suspend your criticism folks! This gentleman is a true genius! Lots of experience rebuilding Nissan engines with a whole lot of patience. Bravo!!! 👍

    @markahad6583@markahad65838 ай бұрын

  • Not only is this guy great at bringing a heap of junk back to life he is extremely talented at video editing too 👍😊

    @stevenjohns1322@stevenjohns1322 Жыл бұрын

  • Просто не вероятно!Так все качественно обработано и собрано,а это ведь нужно ещё суметь разобрать.. но все таки, странно что автор не восстановил поддон картера, крышку клапанов и не залил масло. Привет из России 🇷🇺

    @utey_play4068@utey_play4068 Жыл бұрын

    • где тут качество? в поршневой износ, картерные газы вырывались бы и двигатель ушел в разнос. с такой самодельной прокладкой и никакой фрезеровкой- газы, масло и охлаждайка смешались бы вместе, что и видно в видео, с трубхи охлаждения идёт дымок. движок поработал на масляной плёнке, а потом видимо распредвал начал подклинивать и старый ремень этой нагрузки не выдержал. клапана встретились с поршнями и я сомневаюсь что теперь он молотком выравняет клапана и повторно его запустит. хотя он тот ещё воскрешатель)

      @San4o0409@San4o0409 Жыл бұрын

    • @@San4o0409 все ради одного запуска я думаю. Контент который возможно окупит потраченное время.

      @velzevul88@velzevul88 Жыл бұрын

  • bạn rất giỏi... tôi rất thích những chiếc thuyền bạn chế, nên dành thời gian cho việc đấy nhé, tôi rất muốn có được 1 chiếc xuồng bạn chế đó

    @user-so2rp4ge5e@user-so2rp4ge5e11 ай бұрын

  • Quá tuyệt vời Bạn kiên trì và rất thông minh ❤❤❤❤❤❤

    @ngobatanngobatan7524@ngobatanngobatan752411 ай бұрын

  • Meus parabéns, você ganhou um fã aqui do Brasil, estou ansioso por mais vídeos seus!

    @maquicorp1@maquicorp1 Жыл бұрын

    • Thank you for your interest and comment

      @Mr_Ho@Mr_Ho Жыл бұрын

  • Admirable y nivel epico en mecanica.. eres muy cuidadoso y detallista en la restauración.. el mundo seria mucho mejor con personas que reciclan mas los recursos. Gratitud y respecto por un buen trabajo muy profesional 🥇🥈🥉

    @Lord7Seas@Lord7Seas11 ай бұрын

  • Ty for uplifting me brother with your great example of dedication, work ethic and great camera skills! You inspire people like me and others around the world. Bless you much love and success brother!

    @NeonAstralOfficial@NeonAstralOfficial10 ай бұрын

  • Great work restoring that old engine. 👏🏽

    @Leatherneck-jk9ew@Leatherneck-jk9ew7 ай бұрын

  • Not only does he have to get every piece perfect but he has to set up the cameras to let us see how he does it! I just would not have the patience!! 😬

    @ScotsWhaHae@ScotsWhaHae Жыл бұрын

  • As a german mechanic, i can say chapeau buddy - u did very well

    @dieselduese@dieselduese Жыл бұрын

  • Nissan!! Toyota!! Destrucción imposible!!! Saludos desde Argentina!!

    @juancruz6433@juancruz64332 ай бұрын

  • Absolutely mind blowing! I would have never believed it, had I not watched Part1, Part 2 and then the finish where I saw it run.

    @terryfoster5446@terryfoster5446 Жыл бұрын

  • _I would have changed all the main bearings/bushings and piston rings._ *But I wouldn't be able to move an engine in that state, here the parts are very expensive. You did an excellent job!*

    @bastiaoemmiami@bastiaoemmiami Жыл бұрын

  • Sou do Brasil, tô adorando essa saga , você é muito bom 🇧🇷❤

    @jhonatanrosa8326@jhonatanrosa8326 Жыл бұрын

  • Very very few people impress me. You made me watch in awe. You have just about done the impossible. You are a master !

    @BennettPatten@BennettPattenАй бұрын

  • Je tire mon chapeau vous été extrenement passion et très respectueux des vielles choses moi je suis admiratif devant votre savoir faire étant Bricoleur aussi je suis heureux de voir que je ne suis pas le seul à redonner vie à de vieux moteur ou autres continuez cette passion 💖💖💖💖💖💖💖💖💖🙏🙏🙏🙏🙏🙏🙏

    @user-gb2pr4dx1v@user-gb2pr4dx1v3 ай бұрын

  • As a diesel mechanic …that was beyond incredible !!!

    @keithwhittaker5238@keithwhittaker5238 Жыл бұрын

  • Молодец. У тебя золотые руки. Не бросай заниматься любимым делом. Снимай видео. А мы тебе будем рады поставить лайк. Из России с любовью.🇷🇺

    @user-xt9yn2bi7k@user-xt9yn2bi7k Жыл бұрын

  • I was skeptical at the start as that engine was too far gone but I guess there's no such thing for Mr Ho. Amazing

    @astigakobooom7708@astigakobooom7708 Жыл бұрын

  • Un grand bravo monsieur, vous êtes très fort et c'est un plaisir de vous regarder et employer des techniques pour arriver à vos fin. Je vous admire.

    @christianboutonnet1381@christianboutonnet1381 Жыл бұрын

  • I salute to this mechanic by two hands.

    @roshaanahmad2068@roshaanahmad2068 Жыл бұрын

  • من الجزائر عمل رائع و مضني مع إمكانيات تقنية لهذا الميكانيكي رائعة شكرا لقد اعدت الامل في عالم المعادن لكثير من المحركات التي تنتظر التذويب ههههه شكرا أيها المكرم

    @user-oe6is7hi8x@user-oe6is7hi8x Жыл бұрын

  • Mr. Ho needs a Nissan sponsorship after this 😅

    @HolyCannolis@HolyCannolis Жыл бұрын

  • You need a sign at your gate that says "Flip Flops or Sandles required in working area!" LOL. Great job on cleaning that up! I'm curious the total time it takes from start to finish? I always look forward to your videos!

    @elcucuy6@elcucuy6 Жыл бұрын

  • I am delighted with what I have seen!!! A vivid example for the repair of equipment by improvised means with minimal conditions and costs. The video was invented by a person with extensive technical experience and practical skills! Many thanks to you for interesting content, optimism and ingenuity. Good luck to you!

    @vladimirkalnaguz8670@vladimirkalnaguz86706 ай бұрын

  • Vc é um exemplo de mecânica parabéns. Brasil

    @ernandoangelo5866@ernandoangelo5866 Жыл бұрын

  • That is super impressive what you did with that engine, though I bet it would have high miles on the engine

    @crazyman1650@crazyman1650 Жыл бұрын

  • Bạn giỏi và khéo tay quá. Xin chúc mừng! 😉❤👍🏻

    @thanhphung9768@thanhphung9768Ай бұрын
KZhead