KZhead
Фильм және анимация

Making a Secret Compartment Box // Inspired by Dustin Penner

TheTranq
2018 ж. 29 Там.
1 247 120 Рет қаралды
Жүктеу

Follow me on Instagram: / the_tranq
Ever since I saw his video two years ago, I've been wanting to make Dustin Penner's "Secret Compartment Box II", and I was finally able to. It's not perfect, but I'm happy with how it turned out. When I get back to school this fall, I plan on using the CNC to make the lid again as I got some blow out with the router. Please be sure to subscribe for more content, and thanks for watching. Check out Dustin's channel for the "how to" video and other great content.

Пікірлер

  • I really like the simplicity of your compartment design. Easier to open and less parts that might break or fail.

    @theGhostWolfe@theGhostWolfe5 жыл бұрын

    • Thank you! Yes it seems to work just as effectively as the original design as well

      @TheTranq@TheTranq5 жыл бұрын

  • Wonderful to watch!

    @jimmorgan5612@jimmorgan56124 жыл бұрын

  • Great project! Thanks for posting it. Subscribed!

    @DIYMinded@DIYMinded4 жыл бұрын

  • After watching Dustin Penner's video KZhead suggested this one for me. Well, don't mind if I do because I

    @nefelibatacomingthrough2707@nefelibatacomingthrough27073 жыл бұрын

  • Profissional muito bom mesmo 👏👏👏

    @flaviocunha96@flaviocunha965 жыл бұрын

  • Sweet build ! you put that Dewalt table saw through its paces ! i ran a Architectual Woodworking Company Installation Division for 20 years and it got to the point that i only liked the Dewalt job site or portable TableSaws out on the jobs for the Installers most of all the other brands are real junk and don’t hold up to the job conditions plus the Dewalt has a better Fence and some other features Although as I get older i’m more of a Sawstop guy

    @craigmonteforte1478@craigmonteforte14784 жыл бұрын

    • Its worked great for years! Thanks for watching

      @TheTranq@TheTranq4 жыл бұрын

    • @@TheTranq what happened to the guard over the saw blade, very dangerous not to have one

      @rodjames@rodjames Жыл бұрын

  • Nicely done. I think I may enjoy the simplicity of the opening mechanism more than the original. (Sorry Dustin) A trick with routing out a large section like that is to start in the middle and work your way out. Setup guide blocks inside your end goal size for the router to rest on, then remove them as you work towards the final exterior wall.

    @DumbfoundedMadman@DumbfoundedMadman3 жыл бұрын

  • beautiful work, like 👍

    @musicislife6804@musicislife68045 жыл бұрын

  • Great looking box!

    @richardhamilton7030@richardhamilton70304 жыл бұрын

    • kzhead.info/sun/jcardrKJgKd-oWg/bejne.html

      @medo2022@medo20222 жыл бұрын

  • this is awsome, you are a real craftsman

    @christofix@christofix5 жыл бұрын

    • Appreciate it man always working on improving

      @TheTranq@TheTranq5 жыл бұрын

  • Love it. If I was to take any valuables from your house I would take this box and the stash would be a bonus lol.

    @denniskazich7559@denniskazich7559 Жыл бұрын

  • Nice build! I’ve seen a ton of variations of my SCB but I’ve never seen anyone go with a lid like that. That paduak should be hard enough to resist any major wood movement so I don’t think it’ll cause any problems. Keep it up!

    @dpmakestuff@dpmakestuff5 жыл бұрын

    • Hack

      @willfishing5605@willfishing56054 жыл бұрын

    • En Que Pais Es Esto ??? Me Hacen Favor Me Dicen ??? Gracias.. Desde COLOMBIA.......

      @FranciscoSanchez-ix2yh@FranciscoSanchez-ix2yh3 жыл бұрын

    • Bonjour

      @abdeslemhammoudi8368@abdeslemhammoudi83683 жыл бұрын

  • Thank you for a new idea

    @mesbahzara2422@mesbahzara24224 жыл бұрын

  • Nice work!

    @Gonzomedic1@Gonzomedic15 жыл бұрын

  • Você e muito inteligente, parabéns ficou perfeito

    @JoseRoberto-sq1oe@JoseRoberto-sq1oe4 жыл бұрын

  • Awesome dude

    @infinityzlayer5070@infinityzlayer50704 жыл бұрын

  • Amazing !!!

    @orionstar6747@orionstar67473 жыл бұрын

  • Absolutely love it!

    @donaldduck4867@donaldduck48674 жыл бұрын

    • Kkkjh

      @amilcarromero4859@amilcarromero48594 жыл бұрын

  • Very clever. 2022. still holds up.

    @warpo007@warpo007 Жыл бұрын

  • Great job !! greetings from Uruguay

    @aarrioladiy@aarrioladiy3 жыл бұрын

  • Sou apaixonado por ferramenta principalmente marcenaria . Eu acho muito bonita essa profissão . Pense numa bancada completa. Queria poder que eu compraria

    @mizaelcampos2717@mizaelcampos27175 жыл бұрын

  • That's a good looking box! You got mad skills! But I would recommend that you do some maintenance on that crosscutting sled. That should slide easily on the table, yours was sticking like crazy. That could comprise some of your cuts or even hurt you if it breaks. Food for thought, great vid anyway!

    @manny7155@manny71555 жыл бұрын

    • Appreciate it. Yes my cross cut sled got really sticky by the end of the summer looking for a solution for that

      @TheTranq@TheTranq5 жыл бұрын

    • I have that same saw and every sled I build sticks like crazy, even with waxing. I think it’s the idiotic textured powder coat that DeWalt uses on the table. It’s really designed for cutting 2x4s on a construction site, but the cost and portability are hard to beat for a small home shop....

      @ronskopitz2360@ronskopitz23604 жыл бұрын

  • Damn you wasn't kidding about not liking the bottom and making it bigger. Lol holly shit that box is gonna be heavy

    @fetsluck5620@fetsluck56204 жыл бұрын

  • 👏👏👏👏very good

    @joelsongoncalves7487@joelsongoncalves74875 жыл бұрын

  • where did you get the spring from?

    @katrinadinh5070@katrinadinh50704 жыл бұрын

  • Essa artes ficou lindo meus parabéns

    @denivalsousa1757@denivalsousa1757 Жыл бұрын

  • I try this thanks

    @csundar4703@csundar47034 жыл бұрын

  • Belo trabalho.

    @gabrielmarianodasilva6264@gabrielmarianodasilva62644 жыл бұрын

  • projeto muito bacana

    @euaprendizdemarceneiro1170@euaprendizdemarceneiro11705 жыл бұрын

  • Hello friend, interesting secret box, I wonder what kind of orange wood it is? Thanks in advance for your reply.

    @damiranis2858@damiranis2858 Жыл бұрын

    • Cherry and pauduk!

      @TheTranq@TheTranq Жыл бұрын

  • Nice work. What is that orange wood? It's beautiful.

    @TheLizardOfOz@TheLizardOfOz4 жыл бұрын

    • Thanks! It's bubinga!

      @TheTranq@TheTranq4 жыл бұрын

  • Absolutely a good work.

    @sairaqsa@sairaqsa5 жыл бұрын

    • Thanks I appreciate it!

      @TheTranq@TheTranq5 жыл бұрын

  • I wish i had all those nice tools

    @Dave-tw9ib@Dave-tw9ib2 жыл бұрын

  • Ever considered a nice miter saw?

    @MichaelGa@MichaelGa4 жыл бұрын

  • 👏👏👏👏👏👏

    @mariaaparecidafrancelinool8472@mariaaparecidafrancelinool84725 жыл бұрын

  • très beau

    @gaspareparisi1678@gaspareparisi16784 жыл бұрын

  • cool

    @joshuawaddell6640@joshuawaddell66404 жыл бұрын

  • And also what are the metal sticks you useds for the secret compartment?

    @katrinadinh5070@katrinadinh50704 жыл бұрын

  • I wanna know how many peaces of wood hit the res car when cutting the miters

    @fetsluck5620@fetsluck56204 жыл бұрын

    • Clearly you haven't cut many miters there's no strain between the blade and the fence

      @TheTranq@TheTranq4 жыл бұрын

    • You would be correct. I don't know shit about it . I just seen a couple peaces move and was heading towards the car. I Wasn't being a asshole about it. I was just curious. Woodworking is not my greatest. I wish I had the mindset to make stuff like that with wood. But sadly I'm just good at working on trucks and cars. I do admire the work you did. I love me a puzzle box or a box with a hidden compartment or drawer. I have a wooden box that has 5 slots going through it and you have to figure out the correct pattern to get it open. I wish is was made out of good real wood like your box but it's made from that cheap shit. Idk what it's called. But it's still a ok box. It will never last as long as your box. Ok I'm gonna shut up bc if not I will talk your head off about this stuff. I'm interested in it but just can't get the nack of it.

      @fetsluck5620@fetsluck56204 жыл бұрын

  • Drilling towards your own hand,,,,how brave !

    @donallen7269@donallen72693 жыл бұрын

    • Drill press

      @TheTranq@TheTranq3 жыл бұрын

  • What kind of wood is that orange color you used for the top and the bottom of the box

    @mervindolland8114@mervindolland81145 жыл бұрын

    • I believe it was bubinga. Thanks for watching

      @TheTranq@TheTranq5 жыл бұрын

    • I was scared I might be colour blind until I saw your comment.😆 Bubinga is native to which part of the world???

      @seyievetolohe2151@seyievetolohe21515 жыл бұрын

  • great job .... what software do you use to create the plans

    @raff.7584@raff.75844 жыл бұрын

    • Thanks! Autodesk Fusion 360

      @TheTranq@TheTranq4 жыл бұрын

    • El ladrón no solo se va a robar las joyas se lo lleva con con el cofre Pp

      @alejandroelejaldesanchez4254@alejandroelejaldesanchez42543 жыл бұрын

  • Super

    @solomonraja8337@solomonraja83375 жыл бұрын

  • This might be a stupid question but I'm new to wood working and want to know where to get wood like this and others like walnut?

    @haydengooding5124@haydengooding51244 жыл бұрын

    • From trees

      @robertburns8218@robertburns82184 жыл бұрын

    • @@robertburns8218 no need to be an idiot

      @haydengooding5124@haydengooding51244 жыл бұрын

    • Generally, the wood comes from trees, but if you don't have access to trees, you can google "lumber supply" in your area (just not the big box stores). Or, try craigslist, FB marketplace, eBay,

      @act2.533@act2.5334 жыл бұрын

    • @@act2.533 yeah I don't have access to trees or any sort of mill to even be able to make boards from trees. I didn't know if there was a national store or carrier of specialty wood like this

      @haydengooding5124@haydengooding51244 жыл бұрын

    • Unfortunately no, there isn't a chain store, you are at the mercy of what's available and what price they want to charge based on your area. I have places close to me, but the best material and price is about an hour drive.

      @act2.533@act2.5334 жыл бұрын

  • عمل رائع و متقن .

    @zahirboucheloukh1938@zahirboucheloukh19384 жыл бұрын

  • Отлично. 👍

    @user-uw6ig6wu9i@user-uw6ig6wu9i5 жыл бұрын

  • Cuanto cuesta la cajita 😆

    @pabloorellana3653@pabloorellana36535 жыл бұрын

  • Muy bonito trabajo, lástima que se muestre en cámara rápida lo que no permite ver detalles

    @marioalejandroaranedaespin6523@marioalejandroaranedaespin65235 жыл бұрын

  • отлично!

    @user-mm1nh1jn9j@user-mm1nh1jn9j5 жыл бұрын

  • What did you put in that drawer to make it so black?

    @joshwilson7240@joshwilson7240 Жыл бұрын

    • It is called flocking

      @TheTranq@TheTranq Жыл бұрын

  • This is awesome! Would you mind sending me the plans?

    @eliwinterscheidt3577@eliwinterscheidt35774 жыл бұрын

    • Do you have an email I can send it to?

      @TheTranq@TheTranq4 жыл бұрын

    • @@TheTranq winterscheidte@gmail.com Thank you so much!

      @eliwinterscheidt3577@eliwinterscheidt35774 жыл бұрын

    • May I also have a copy of the plans. Star1ez54@yahoo.com

      @star1ez@star1ez4 жыл бұрын

    • @@TheTranq lukasz3131@gmail.com

      @ukaszzar9031@ukaszzar90314 жыл бұрын

  • Классно!! 👍

    @pda111@pda1114 жыл бұрын

  • Respect to your handyman ship although I didn't find the secret compartment is that secret...XD... maybe your first attempt thickness made more sense...

    @elisabethsun4263@elisabethsun42634 жыл бұрын

    • Interesting. Do you think it wasn't secret because of the thickness of the trim then?

      @TheTranq@TheTranq4 жыл бұрын

  • Naic god

    @hajikhanhajikhan8180@hajikhanhajikhan81804 жыл бұрын

  • buenooooo

    @mauriciocornejoleiva3712@mauriciocornejoleiva37124 жыл бұрын

  • CON LA MOLLA! HAAA,HAA :)

    @silvanapinelli@silvanapinelli3 жыл бұрын

  • What’s going on!!!

    @marlynlynch7974@marlynlynch79744 жыл бұрын

  • amigo the tranq usted hizo algo para usted no para en canal sus seguidores

    @jw1768@jw17684 жыл бұрын

  • думаю тайник можно было сделать из фанеры. столько расходов. а в целом класс

    @Sauelov@Sauelov4 жыл бұрын

  • Mucho trabajo para un simple alajero..

    @futurefangdlmx4582@futurefangdlmx45825 жыл бұрын

  • Any blueprints?

    @jasonwassell5394@jasonwassell53944 жыл бұрын

    • I can post drawings today

      @TheTranq@TheTranq4 жыл бұрын

    • TheTranq Thank you.

      @jasonwassell5394@jasonwassell53944 жыл бұрын

  • Looks too nice so thieves will take the whole box!!

    @andre3823@andre38235 жыл бұрын

  • Too fast and furious for me...cant tell half of what he's doing.... Nice design though

    @richardaaronringquist3316@richardaaronringquist33164 жыл бұрын

  • Where are the plans for this specific box? Thanks!

    @scottvannote1223@scottvannote12235 жыл бұрын

    • Scott Van Note I can send you an email with the ones I made otherwise Dustin Penner sells them on his website!

      @TheTranq@TheTranq5 жыл бұрын

    • TheTranq Thank you Very much. Wrkn4Jesus777@hotmail.com. Have a wonderful Thanksgiving.

      @scottvannote1223@scottvannote12235 жыл бұрын

    • Scott Van Note No problem I will send what I have after the Thanksgiving break and you as well!

      @TheTranq@TheTranq5 жыл бұрын

    • Scott Van Note No problem I will send what I have after the Thanksgiving break and you as well!

      @TheTranq@TheTranq5 жыл бұрын

    • Can I get a copy?

      @adamwhitley6977@adamwhitley69775 жыл бұрын

  • Eres bueno, eres muí bueno..

    @carlospico7745@carlospico77454 жыл бұрын

  • Have you noticed how carpenter KZheadrs get on your nerves by using all kinds of professional tools but when it comes to screwing a screw they use a regular hand screw driver!!??

    @dadalhayek695@dadalhayek6954 жыл бұрын

  • I dont get the high speed videos. why do them at all

    @nicholasschrader2399@nicholasschrader23994 жыл бұрын

    • So you can actually see the whole process without a 50 minute video

      @TheTranq@TheTranq4 жыл бұрын

  • 0:30 Cutting like that you're asking for a kickback, at least you have the car as a backstop.

    @SupposedlyFree@SupposedlyFree4 жыл бұрын

    • There are no dangerous cuts in this video

      @TheTranq@TheTranq4 жыл бұрын

    • @@TheTranq not sure if this is the perfect example of Poe's law or not...

      @SupposedlyFree@SupposedlyFree4 жыл бұрын

    • @@SupposedlyFree There is plenty of surface to reference and am cutting a miter absolutely no danger of kickback

      @TheTranq@TheTranq4 жыл бұрын

    • @@TheTranq Oh, you're the OP, so you're serious. Wow. Start watching at 0:30 and watch your push stick. Notice how the edge closest to the blade is raising? That's b/c you are pulling the board toward you and pushing down to try and keep it in the path of the blade, while sliding your work piece sideways. Very bad practice using a table saw in this manner. Also, it is called a push stick (or block, enter your choice of shape here) not a slide it sideways stick, because you should be pushing through the blade. You have been lucky so far, but you may want to learn about how kickbacks can happen.

      @SupposedlyFree@SupposedlyFree4 жыл бұрын

    • @@SupposedlyFree Watch my videos do you really think I don't know how a push stick works? If you think a certain technique is dangerous then don't do it. I feel completely safe performing this cut for miters

      @TheTranq@TheTranq4 жыл бұрын

  • Делает гроб для Дональда Трампа👍👍👍👍👍

    @aleksandrvard2557@aleksandrvard25575 жыл бұрын

  • Y Si Pagan Tanto Trabajo ALLÁ ??? X Que Aquí En Colombia Quieren Todo Regalado.......

    @FranciscoSanchez-ix2yh@FranciscoSanchez-ix2yh3 жыл бұрын

  • All that brand new, top of the line equipment.....just for a highschool project.

    @nayosilver1180@nayosilver11804 жыл бұрын

    • Nice

      @TheTranq@TheTranq4 жыл бұрын

    • @@TheTranq ...thanks 👍

      @nayosilver1180@nayosilver11804 жыл бұрын

    • @@nayosilver1180 why don't you post some of your builds then

      @TheTranq@TheTranq4 жыл бұрын

  • great audio if you like saws -- too bad no spoken words

    @ProfessorVector@ProfessorVector3 жыл бұрын

    • My new videos have voice overs!

      @TheTranq@TheTranq3 жыл бұрын

  • Would love to see someone make this with hand tools none of these fancy tools that do the job for you 😂

    @Jimmiburn@Jimmiburn5 жыл бұрын

  • Muy peligroso cortar en ángulo ubicandose a un costado de la maquina

    @raulquisbert6332@raulquisbert63325 жыл бұрын

  • رؤؤؤؤعه

    @user-zz6dy1du5u@user-zz6dy1du5u4 жыл бұрын

  • Это было о%уенно !

    @Tumann604@Tumann6043 жыл бұрын

  • Такую будку соорудить чтобы там лежала маленькая цепочка 🤦

    @user-yz2tg8xz6b@user-yz2tg8xz6b Жыл бұрын

  • Плохой тайник. Стоит потрясти шкатулку и сразу понятно, что внутри что то есть.

    @scientistcat4942@scientistcat49425 жыл бұрын

    • поролон, мешочек для брюликов, чтоб не бултыхалось. Тут интереснее найти Как открывается, а не Что внутри )

      @2012PACCBET@2012PACCBET5 жыл бұрын

    • @@2012PACCBET если внутри брюлики- открывается ударом об пол. Весь смысл в секрете.

      @scientistcat4942@scientistcat49425 жыл бұрын

    • @@scientistcat4942 , Да, если знать что там брюлики). А если ничего не бултыхается? Конечно, можно догадаться по толщине дна, что там их два, если есть время разглядывать. Такой секретик не от воров - воры и шкатулку унесут...

      @2012PACCBET@2012PACCBET5 жыл бұрын

    • @@2012PACCBET а от кого?😮

      @scientistcat4942@scientistcat49425 жыл бұрын

    • @@scientistcat4942 , интереснее найти Как открывается. Головоломка ) пс: хочу освоить ещё одно ремесло - вот и смотрю-учусь на таких видео-уроках. Видел шкатулку, у которой на крышке нужно сдвигать реечки в определённой последовательности, типа как игра "Пятнашки".

      @2012PACCBET@2012PACCBET5 жыл бұрын

  • nice box, but I cringed when I saw you turning all that paduak into sawdust.

    @tchevrier@tchevrier2 жыл бұрын

  • Sto se Covjek namuci a kod Kineza ovako nesto 5 eura doduse plastika

    @sifetsusic57@sifetsusic575 жыл бұрын

  • Мавзолей не иначе, или урна для праха.

    @user-yp5tn3yi5l@user-yp5tn3yi5l4 жыл бұрын

  • dude really? do you think we didnt see all those major mistakes u made? why didnt you fix them? Lazy! It couldve rode all Shiney and Chrome on the Fury Road, instead it was just Mediocre! (for real man i was just teasin ya, its pretty damn cool)

    @ingoddafeario2757@ingoddafeario27574 жыл бұрын

    • Mistakes are how you learn

      @TheTranq@TheTranq4 жыл бұрын

    • i know man, i was just messing around with ya man cause i wanted to see u go back and fix those. lol! you actually did a pretty bang up job. ill give u props dude. high five for real!

      @ingoddafeario2757@ingoddafeario27574 жыл бұрын

  • 🙄

    @aliannab8082@aliannab80825 жыл бұрын

  • The Irony: I like these ideas a lot _BUT_ *do not* like this video where you show all the *_home invaders & robbers_* exactly where to find your _now_ not so hidden compartments. Does this not defeat it's whole aim of no one knowing where your stuff is? This is a very unwise video.

    @sweetcostarica@sweetcostarica2 жыл бұрын

  • Zenginlik başka şey adam alet koleksiyonu yapmış baksana dewalt in bütün aletleri var adamda ..o kadar aletle yaptığı işe bak bide ...

    @megaolygronyoid1479@megaolygronyoid14795 жыл бұрын

    • Looks like dewalt has all the tools, man, look what he does with his dick ... Translation: Not a good comment dude

      @talegunner115@talegunner1155 жыл бұрын

  • My goodness, that box is ugly

    @RJ-fc6je@RJ-fc6je3 жыл бұрын

    • Nice! Why don't you post a video then?!

      @TheTranq@TheTranq3 жыл бұрын

  • Just entertainment no learning here. move on

    @nicholasschrader2399@nicholasschrader23994 жыл бұрын

    • There are actually many good tips you could pick up by watching but it sounds like you'd rather just complain. Ever heard of Jimmy Diresta? Same video style and he is doing just fine

      @TheTranq@TheTranq4 жыл бұрын
KZhead