KZhead

#16 Gorgeous Resin Geode Coasters Step By Step!

Glitz N' Glitter By Michelle
2023 ж. 27 Ақп.
38 668 Рет қаралды
Жүктеу

If you would like to purchase these demo coasters please email me at sweetsnsprinkles7@gmail.com. My cost to make these was $20 plus shipping. If this still written they are available. You can find all my products on Poshmark as well under @michellecegledi
Link To Tour My Resin Room With Resin Poured Countertops: • #5 Full Tour Of My Res...
Link To Clean Resin Containers Super Quick: • #13 How To Clean Your ...
Amazon Wish List: www.amazon.com/hz/wishlist/ls...
Buy Me A Coffee Here! Thank you so much ! bmc.link/glitznglitr
Eye Candy Rainbow Green Mica Powder Link: amzn.to/3yuEoT7
Deco Color Gold Paint Pen: amzn.to/3laEvQz
LA Colors Dollar Tree Eyeshadow Mica Powder Link: amzn.to/3mieO1n
99% Alcohol Link: amzn.to/3MyyTLd
Resin: amzn.to/3GDpDll
________________________________________________________________________________________________
Let's Resin Affiliate Links:
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Let's Resin 150oz deep pour resin: amzn.to/43BMQwX
Let's Resin 20oz fast cure resin: amzn.to/44U9hOZ
Let's Resin 720z fast cure is amzn.to/3QCH3EH
Let's Resin 1gallon epoxy resin: amzn.to/3DJNRsd
Let's Resin 1 gallon table top resin: amzn.to/3Qxmidz
Let's Resin Polyurethane resin: amzn.to/3Q0qC4E
Let's Resin white alcohol ink (C deeper): amzn.to/3O4ZI8W
Let's Resin 450ml silicone cup: amzn.to/43SZOXv
Let's Resin 26 colors ink set: amzn.to/3q2vmMn
Let's Resin resin tape: amzn.to/47qgisU
Let's Resin collector mat: amzn.to/47tUkWa
________________________________________________________________________
Resiners Resin Dryer for Cup Turner --
resiners.com/collections/resi...
Amazon link For Resiners Products:
the AirLess bubble removal machine --www.amazon.com/Resiners-Remov...
Resiners Resin Dryer for Cup Turner -- www.amazon.com/Resiners-Machi...
_____________________________________________________________________
Misc. Items
99% Alcohol: amzn.to/3Z83cve
Heat Gun: amzn.to/3n6j9ol
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Large Disposable Mixing Cups: amzn.to/3TuByqW
Small Disposable Mixing Cups: amzn.to/3A2QCTy
Silicone Tool: amzn.to/3orcB46
Craft Knife: amzn.to/3KcLpOW
Deburring Tool: amzn.to/3lBzAs8
Lets Resin - Resin Curing Machine: amzn.to/3NXkWXu
Tumbler Turner: amzn.to/436Lrye
Mini Torch: amzn.to/44vRJsp
Large Torch: amzn.to/46tqq3E
Mica Spoon: KN10425
Cricut: amzn.to/3Qh1LcM
Happy Mail:
8730 Mystic Circle
North Port, FL 34287

Пікірлер

  • Absolutely beautiful, really love your work but oh that music is so irritating….❤

    @lorrainecaddy1433@lorrainecaddy14333 ай бұрын

  • Omg, i love these. I’m new and overwhelmed. This is very beautiful and helpful!

    @angeladiaz9843@angeladiaz98434 күн бұрын

    • Glad it was helpful!

      @glitznglitterbymichelle1@glitznglitterbymichelle14 күн бұрын

  • These are really great! I really appreciate your easy to follow tutorial.

    @emilylesher239@emilylesher239 Жыл бұрын

  • This is so straight forward with no unnecessary steps, makes the process seem really approachable. Thank you so much

    @missionrestopia@missionrestopia Жыл бұрын

    • My pleasure!!! Another one coming out in a few days with a different color!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Interesting concept of using eyeshadow!

    @kelleythomason8642@kelleythomason8642Ай бұрын

  • Oh! No! Not another craft! Totally love the technique! Stunning! Can't wait to see more. Thank you for sharing, Michelle.

    @cathievredenburg8019@cathievredenburg8019 Жыл бұрын

  • Those turned out gorgeous, they look like slices off the real thing. I love the colors you pick, very tasteful. Thank you for sharing and God bless. ❤️😊

    @jennifermenth-pavel1260@jennifermenth-pavel12609 ай бұрын

    • You are so welcome

      @glitznglitterbymichelle1@glitznglitterbymichelle19 ай бұрын

  • This was wonderful, and you are clear and concise in your instructions! Thank you 😊.

    @deniseleavitt6483@deniseleavitt64832 ай бұрын

    • Thank you ☺️

      @glitznglitterbymichelle1@glitznglitterbymichelle12 ай бұрын

  • So beautiful! ❤ The green and gold is perfect!🤗🥰

    @suewarnes9469@suewarnes94694 ай бұрын

  • These turned out so pretty! And they look good on the back as well. Bonus!❤

    @katyjohnson3548@katyjohnson35483 ай бұрын

  • So pretty!!

    @marycasasnovas5710@marycasasnovas5710 Жыл бұрын

  • This is the easiest tutorial I’ve seen on resin geodes. I’ve been using resin for countertops and tables and am just starting to make more artsy stuff like this. 🩵

    @scrapbooksiren1608@scrapbooksiren16085 ай бұрын

  • These are so gorgeous! I want to make some now!!!

    @sherryfaires7931@sherryfaires7931 Жыл бұрын

  • Beautiful

    @trowan3082@trowan30825 ай бұрын

  • This is one of the best videos I have seen doing this to explain how to do

    @karendarling7246@karendarling7246 Жыл бұрын

    • Thank you so much! Thanks for wathing and please subscribe!!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Beautiful!!!!

    @miriamluskberry@miriamluskberry10 ай бұрын

  • This is my favorite look for coasters!

    @deluke_arts@deluke_arts5 ай бұрын

  • Gorgeous coasters! ❤

    @erikavolltrauer8549@erikavolltrauer85493 ай бұрын

  • How wonderful ❤❤

    @KarenYauney@KarenYauney10 ай бұрын

  • These turned out absolutely gorgeous! 😊

    @EllenfromSanDiego@EllenfromSanDiego10 ай бұрын

    • Thank you! 😊

      @glitznglitterbymichelle1@glitznglitterbymichelle110 ай бұрын

  • These are so beautiful. Thank you for this tutorial. Going to try make a platter as well.

    @irenerhynes6732@irenerhynes6732 Жыл бұрын

    • Thank you!! I did a platter for a friend in black white and silver and it came out beautiful. That was before I made videos unfortunatley!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Those are so pretty. I can’t wait to try. Thank you.

    @Cajunkaty@Cajunkaty3 ай бұрын

  • Awesome ❤

    @tiararozell4228@tiararozell42285 ай бұрын

  • Excelente trabajo 👏👏👏

    @MayraSablon@MayraSablon4 ай бұрын

  • Wow really pretty 😊

    @bexcraftdesigns@bexcraftdesigns Жыл бұрын

  • Best geo I’ve seen thank you!

    @marlamakley-alden5299@marlamakley-alden52999 ай бұрын

    • Wow, thanks!😃

      @glitznglitterbymichelle1@glitznglitterbymichelle19 ай бұрын

  • Beautiful 💚

    @siobhankirk9320@siobhankirk9320 Жыл бұрын

    • Thank you !!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Love this

    @ninahartnett3509@ninahartnett35093 ай бұрын

    • Thanks 😊

      @glitznglitterbymichelle1@glitznglitterbymichelle13 ай бұрын

  • These are gorgeous! You never fail to amaze me. I can’t wait to get my molds and try my hand at making these!

    @joannedwy7100@joannedwy71009 ай бұрын

    • Have fun! 😊

      @glitznglitterbymichelle1@glitznglitterbymichelle19 ай бұрын

  • Wow! These are gorgeous! Great video! Thank you. 🌟

    @katek.3339@katek.3339 Жыл бұрын

    • Thanks for watching! 😊

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Beautiful colour 👌

    @devangibuch2707@devangibuch27078 ай бұрын

    • Thank you so much 😊

      @glitznglitterbymichelle1@glitznglitterbymichelle18 ай бұрын

  • These are really pretty. I like that green!

    @SheriPhaffArtPaintBrushed@SheriPhaffArtPaintBrushed Жыл бұрын

    • Thanks! 😊

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Very beautiful my favourite colour combination will try for sure 👏👌😘

    @faridamiabhoy3185@faridamiabhoy3185 Жыл бұрын

  • Love them. Very pretty! :)

    @jessicalarson3758@jessicalarson3758 Жыл бұрын

    • Thank you!!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Badass! I will starting my set!!

    @trulybrandise9600@trulybrandise9600 Жыл бұрын

    • Thank you! I'd love to see yours!!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Gorgeous! I'm glad to have found your channel.

    @nichole_kvlf@nichole_kvlf Жыл бұрын

    • Thank you! I’m glad you found me too! New videos several times a week!!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Omg these came out so gorgeous! I'm tempted in making some for my girlfriends!!! Thank you so much for this tutorial!!!

    @rochim.1192@rochim.1192 Жыл бұрын

    • Try it! Is so easy 😊

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Fabulous to say the least .Thank you so much for sharing 😘😍🥰

    @dolleyferguson1861@dolleyferguson18618 ай бұрын

    • You are so welcome!

      @glitznglitterbymichelle1@glitznglitterbymichelle18 ай бұрын

  • Beautiful. Thanks so much for the tutorial and explaining how you divided the resin❤

    @yanxacreations@yanxacreations11 ай бұрын

    • Your very welcome! I wish more people did that it sure would help!

      @glitznglitterbymichelle1@glitznglitterbymichelle111 ай бұрын

    • @@glitznglitterbymichelle1did you wait any time between the last layer, thanks for a great video.

      @CaptMarkSVAlcina@CaptMarkSVAlcina8 ай бұрын

    • The top coat? Yes once it was cured I put the clear on.

      @glitznglitterbymichelle1@glitznglitterbymichelle18 ай бұрын

  • Ellerinize sağlık çok güzel olmuşlar.

    @nurhanyldrm9024@nurhanyldrm90245 ай бұрын

  • These r beautiful and of course I had to subscribe can’t wait to watch more

    @sarahgreen8409@sarahgreen8409 Жыл бұрын

    • Thank you so much!!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Hi! I just recently found your channel! So far I'm loving your stuff! I am especially jealous of your craft room!😂

    @cheryllarnerd3779@cheryllarnerd3779 Жыл бұрын

    • Thank you so much!!! Thanks for watching! More to come!!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Pretty! I am going to try. (with your video to guide me)

    @debraleblanc6122@debraleblanc61228 ай бұрын

    • Wonderful! 😃

      @glitznglitterbymichelle1@glitznglitterbymichelle18 ай бұрын

  • I just bought the same eye shadow from dollar tree last week before watching your video lol

    @BeccaL2016@BeccaL20164 ай бұрын

  • 😱 GORGEOUS ❣️ You've got yourself a new subscriber here ✌️

    @s.714@s.714 Жыл бұрын

    • Thank you!!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Gorgeous! I’ve never seen anything like this before so I amazed. Also, I just subscribed. Thanks!

    @dma8807@dma8807Ай бұрын

    • Thank you! I hope you enjoy the channel! Time to binge watch and catch up 😁

      @glitznglitterbymichelle1@glitznglitterbymichelle1Ай бұрын

  • Вы большая умница! У вас очень красивые работы. Спасибо, что делитесь с нами

    @user-si5my2bo5e@user-si5my2bo5e7 ай бұрын

    • Thank you ☺️

      @glitznglitterbymichelle1@glitznglitterbymichelle17 ай бұрын

  • Wow 👌💞

    @amazingthings2463@amazingthings2463 Жыл бұрын

  • So glad to have "discovered" you, Michelle...liked and subbed. 😊 VERY pretty colors and a great job of doming! I'll go to your other link - love resined counter tops! For a commenter below: @Anna Koehn Art Anna, the striations occur with mica in resin because of the tendency of resin to pull inwards to the center. Also, as the chemical exothermic reaction (curing) occurs, which creates even more pulling, the mica powders continue their journey to the center until the resin has stabilized and stopped moving inwards. Glitter on the outer edge will do the same (or anything else not nailed down). HTH?

    @fairyspunfibers9098@fairyspunfibers9098 Жыл бұрын

    • Thank you!! Welcome to my channel, I hope you enjoy!!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Absolutely gorgeous! Great job! What could you use on the back instead of cork? I’m afraid it would ruin the look.

    @judeediehl@judeediehl7 ай бұрын

    • They have little clear rubber feet you can use too

      @glitznglitterbymichelle1@glitznglitterbymichelle17 ай бұрын

  • 🎅 @‌AlphaDTFPrint is making Santa designs come alive on glass jars with UV DTF Printing! 🖨 Have you explored this festive art? Share your prints and check out their latest post! #DTFInnovation #SantaPrints

    @Alpha_DTF_Print@Alpha_DTF_Print5 ай бұрын

  • I’m new to this so I’m all over the place watching different ppls channels. I’ve noticed a lot are UK so grams & mmls and the accents drive me nuts lol As soon as you said ounces I hit the thumbs up button and subscribed.

    @ladybug2663@ladybug26639 ай бұрын

    • Hahaha thank you!! Yes not too many I watch are in the US! Thanks for watching 🥰

      @glitznglitterbymichelle1@glitznglitterbymichelle19 ай бұрын

  • New Sub 💚 Love this color combination! I am making knobs for a cabinet in my office but have one question about the gold leaf. How long did you wait before adding the leaf? I saw 15 later on the next step but there was a cut before the leaf and want to make sure I do this exactly the way you did so the gold leaf doesn't spread out everywhere because my geode mold is much smaller. Thank you for all of your amazing tutorials 🥰

    @gigidtx@gigidtx11 ай бұрын

    • I only waited a few minutes to add the gold leaf. You can babysit it for 15 minutes after it’s placed to manipulate it to stay where you want it with a silicone tool or pop stick. Good luck!!

      @glitznglitterbymichelle1@glitznglitterbymichelle111 ай бұрын

  • These are gorgeous! I appreciate your tutorial. Is there something I can read about the usage of these resin products? can they go in the dishwasher, etc. I am a beginner and just want to learn more about these products.

    @teejaygirl818@teejaygirl81828 күн бұрын

    • No they cannot go in the dishwasher 😔

      @glitznglitterbymichelle1@glitznglitterbymichelle128 күн бұрын

  • I watched your video and poured mine right along with you, but mine did not cooperate. There were zero striations. ☹ I hadn't done any resin work in quite a while and I forgot about the effect of room temp on resin. Even though I used a heat gun, I think my room temp may have been too cool. I ran my heater while pouring BUT I turned it off when I was done. I know better than to do that! Temp was probably 68-69 degrees. I am not giving up though. Gonna try again on my next day off 🙂

    @DonnaRichardson-hx5nj@DonnaRichardson-hx5nj3 ай бұрын

    • Interesting 🤨 my house never got that cold so I’m not sure if that’s it or not

      @glitznglitterbymichelle1@glitznglitterbymichelle13 ай бұрын

  • Thank you for the tutorial. They came out very pretty. Why do you spray alcohol on the top of the resin at the beginning of the process? What is it for?

    @sita.hatmosroyo468@sita.hatmosroyo4688 ай бұрын

    • It pops bubbles so I don’t have to torch on my molds and risk ruining them. Make sure to use 99% alcohol though so it doesn’t leave a residue.

      @glitznglitterbymichelle1@glitznglitterbymichelle18 ай бұрын

    • @@glitznglitterbymichelle1 thank you so much 😊

      @sita.hatmosroyo468@sita.hatmosroyo4688 ай бұрын

  • Hello, I love your videos, I just started this hobby, so I made many mistake when making coasters, like I took them out too early they are bended or have bubbles, now they are harden and deformed, how can I re-use them or I just threw them away?

    @BeccaL2016@BeccaL20164 ай бұрын

    • Heat them with a heat gun and lay something flat and heavy on top for a day or two and they will flatten out again. If you don’t like them change the tops with a topcoat.

      @glitznglitterbymichelle1@glitznglitterbymichelle14 ай бұрын

  • Is it a low viscosity resin ? Amazing result 😍😍😍

    @valeryzakarzhevskaya5202@valeryzakarzhevskaya5202 Жыл бұрын

    • No it’s a 1:1 ratio used for casting

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Howwww gorgeoys. The music is NOR as gorgeouzzz😂🤣😅

    @dalialovesdoggies4361@dalialovesdoggies4361 Жыл бұрын

    • Thank you! and the music is just stock music, can't use anything good with copywrights...

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

    • @@glitznglitterbymichelle1 I believe you

      @dalialovesdoggies4361@dalialovesdoggies4361 Жыл бұрын

  • Hi first u took green pigment added to the resin then did u wait for few minutes before pouring?

    @VinuthaKmanjunath-qw2no@VinuthaKmanjunath-qw2no5 ай бұрын

    • No I don’t wait at all

      @glitznglitterbymichelle1@glitznglitterbymichelle15 ай бұрын

  • Hi. Can you tell me what you spray on half way through please? I absolutely love these. X

    @666shazbot@666shazbot Жыл бұрын

    • I spray 99% alcohol to pop bubbles 😊

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

    • @@glitznglitterbymichelle1 Ah thank you. I am going to try this tonight.

      @666shazbot@666shazbot Жыл бұрын

  • How long did you wait before adding the final clear resin. Beautiful coasters

    @dolidinel7938@dolidinel7938Ай бұрын

    • Till the first layer is cured

      @glitznglitterbymichelle1@glitznglitterbymichelle1Ай бұрын

  • Hi, the pen you used to color the border is a permanent color? Or how you seal that color? I am wondering is not going to fade out with the time 🤔 Also, thank you for the tutorial. I love it.

    @amderymejia3317@amderymejia331717 күн бұрын

    • It will rub off if it’s handled a lot there’s really no way to seal that in but can be re applied.

      @glitznglitterbymichelle1@glitznglitterbymichelle116 күн бұрын

  • Is the side facing the mould less shiny?

    @melaniereisner8375@melaniereisner837511 ай бұрын

    • No not as long as your mold is shiny.

      @glitznglitterbymichelle1@glitznglitterbymichelle111 ай бұрын

  • Would you provide a link for the foil that you used in the center please?

    @tonyasmith5409@tonyasmith54094 ай бұрын

    • amzn.to/3Sjgh4G

      @glitznglitterbymichelle1@glitznglitterbymichelle14 ай бұрын

  • This is so wonderful, just two question, Did you say you used liquid dye or Power to dye ? And how long before you put on the last layer of clear resin ?

    @CaptMarkSVAlcina@CaptMarkSVAlcina8 ай бұрын

    • I use mica powder for all my geode coasters. And once it’s cured I add the top coat of clear.

      @glitznglitterbymichelle1@glitznglitterbymichelle18 ай бұрын

    • @@glitznglitterbymichelle1 thanks so much for your information. Do you need to sanding between the top cost so it can fix it self to the dry renin as I see this done on big river tables?

      @CaptMarkSVAlcina@CaptMarkSVAlcina8 ай бұрын

    • Nope I just pour

      @glitznglitterbymichelle1@glitznglitterbymichelle18 ай бұрын

    • @@glitznglitterbymichelle1 thanks very much for letting me know

      @CaptMarkSVAlcina@CaptMarkSVAlcina8 ай бұрын

  • Liked and Subscribed ! Question..what is the purpose of the Alcohol spray ?? Thx.

    @nancycross2228@nancycross2228 Жыл бұрын

    • To pop the bubbles without torching and taking the chance of ruining your molds.

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

    • @@glitznglitterbymichelle1 thank you !

      @nancycross2228@nancycross2228 Жыл бұрын

  • What kind of epoxy are you using? I tried to use the link you posted but it took me to the isopropyl alcohol.

    @farrahbahnfleth116@farrahbahnfleth116 Жыл бұрын

    • Thanks for letting me know I will fix that! Here is the link: amzn.to/3GDpDll

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • Was wondering if a hair blow dryer works?

    @chinnjk@chinnjk6 ай бұрын

    • Yes on high heat 👍

      @glitznglitterbymichelle1@glitznglitterbymichelle16 ай бұрын

  • What resin did you use for this project?

    @melissawells6922@melissawells69225 ай бұрын

    • It would be linked in the description box, off hand I don't remember it was a while ago.

      @glitznglitterbymichelle1@glitznglitterbymichelle15 ай бұрын

  • 6:44 clear resin mean.... Only resin. Or mix with hardener ...dear ..

    @kirtishaw5977@kirtishaw59775 ай бұрын

    • Yes both, it won’t cure unless you mix them together. I just don’t add color to keep it clear.

      @glitznglitterbymichelle1@glitznglitterbymichelle15 ай бұрын

  • any idea how much resin was used in ml?

    @FarhanaEbrahim-mt5ff@FarhanaEbrahim-mt5ff24 күн бұрын

    • Probably approximately 120ml each

      @glitznglitterbymichelle1@glitznglitterbymichelle123 күн бұрын

  • Both green and gold are mica powder?

    @nadaeid-ie6bs@nadaeid-ie6bs Жыл бұрын

    • Yes I have good luck when I only use micas

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • I tried making this for the very first time but both of my colors got mixed what can be the reason?

    @zainabhatim7986@zainabhatim79867 күн бұрын

    • I’d have to see a picture, if you’re on my Facebook group you can share it there and tag me in it so I don’t miss it.

      @glitznglitterbymichelle1@glitznglitterbymichelle17 күн бұрын

    • @@glitznglitterbymichelle1 your Facebook group name or any link?

      @zainabhatim7986@zainabhatim79867 күн бұрын

  • Eye candy is that mica powder

    @brendamorris5036@brendamorris503610 ай бұрын

    • The tan was eye shadow from the dollar tree, basically mica powder re packaged!

      @glitznglitterbymichelle1@glitznglitterbymichelle110 ай бұрын

  • Michelle! Liked and subscribed! Your work is beautiful and your video is great! I think you will reach 1000 quickly! I'm working on the goal, too, and getting close, but it's taken a while! Your coasters are so awesome, I see that I can learn alot from you in my resin work. How did you get the topcoat to dome? Was the first layer almost all the way to the top of the molds? Also, how did those beautiful lines appear as the coasters cured? Lastly, I thought you used a torch to pop the bubbles...what?! Anytime I do that with silicon molds my resin binds to the mold and the mold rips when I take out the cured coaster. Teach me your tricks! I can't wait to see more of your videos and learn from you. Here is a recent board/coaster set I made: kzhead.info/sun/iNmvpsinbp-Ooa8/bejne.html

    @AnnaKoehnArt@AnnaKoehnArt Жыл бұрын

    • I filled the mold up almost to the top with the color then I poured clear just enough to see it over the edge but stop before it overflows. If you get it good you won't have to sand or trim! I think the lines appear because of the mica powder and the clear reacting together but I'm not completely sure. You can use a torch but I do lightly when using a mold, I like the mister of alcohol the best because it pops the bubbles and doesn't leave a film. Thanks for subscribing!!!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

    • @@glitznglitterbymichelle1 That is such good advice. I have used the alcohol on boards and trays but never on coasters...now I will be doing so! Thanks for the tips on the dome effect. I will have to experiment with this, I bet it takes practice to get it right. Happy creating, Michelle!

      @AnnaKoehnArt@AnnaKoehnArt Жыл бұрын

    • @Anna Koehn Art Caution: NEVER use alcohol on the dome. It breaks the surface tension and resin will run over the sides. 😊👍

      @fairyspunfibers9098@fairyspunfibers9098 Жыл бұрын

    • @@fairyspunfibers9098 Thank you for the advice! That's so good to know.

      @AnnaKoehnArt@AnnaKoehnArt Жыл бұрын

  • The music is too loud!

    @3040babycakes@3040babycakes Жыл бұрын

    • Yes this was one of my very first videos I edited. My more recent ones have been changed. I hope you give them another try. Thanks for watching!

      @glitznglitterbymichelle1@glitznglitterbymichelle1 Жыл бұрын

  • What does the alcohol do? Also, what is the point of waiting to put in the gold flakes? Love how your work turned out! I plan on making some very soon

    @chinnjk@chinnjk6 ай бұрын

    • 99% alcohol spritzed on will pop bubbles instead of taking a chance with a torch. Waiting will help stop the movement of the foil. Wait till the resin has almost stopped naturally pulling towards the center. 😊

      @glitznglitterbymichelle1@glitznglitterbymichelle16 ай бұрын
KZhead