KZhead
Автокөліктер мен көлік құралдары

How to Make a Carbon Fiber Swan Neck Wing [DIY] (with 3D Printed Molds)

ECO-LAP Studio
2021 ж. 17 Жел.
360 275 Рет қаралды
Жүктеу

#carbonfiber #swanneckwing #wing
* Wonder Cutter (UltraSonic Cutter) $20 Discount Promotion *
Promo code : ecolap20
Online shop : www.wondercutter.com/order/
How to Make a Carbon Fiber Swan Neck Wing [DIY] (with 3D Printed Molds)
Making a Carbon Fiber Swan Neck Wing with 3D Printed Molds
Homemade Carbon Fiber Swan Neck Wing.
How to Make 3D Printed Mold.
카본 스완넥 윙 만들기 [DIY] (with 3D 프린트 몰드)
카본 스완넥 윙 만드는 방법
홈메이드 카본 스완넥 윙
3D 프린터 몰드 만들기

Пікірлер

  • ECO-LAP Studio Instagram : instagram.com/ecolap_studio/ Wing Model File : drive.google.com/drive/folders/1f-slPY0C0sR2p-qqYSm7kEEfD0eCoO-y?usp=sharing

    @ECOLAPStudio@ECOLAPStudio2 жыл бұрын

    • What's your g-code that you used for the

      @akkira12@akkira122 жыл бұрын

    • This wing looks amazing, I want to build on for my race car, where can we find the billet inserts you used to mount it?

      @dewitoosthuizen3130@dewitoosthuizen31302 жыл бұрын

    • Thanks for uploading files ! Tryin to do some to my project

      @pawelitwic4404@pawelitwic4404 Жыл бұрын

    • Is this a Creality CR-10S Pro printer? Can I do the same thing on a Creality 3D Ender 3 V2 printer?

      @jaypabloPL@jaypabloPL Жыл бұрын

    • 고급기술…그저 감탄 하다가 갑니다❤

      @hyeokkkkkk@hyeokkkkkk Жыл бұрын

  • absolutely brilliant !! i'm working on a single seater race car project and i gotta say your videos are really useful, keep it up man !!

    @willplanes6441@willplanes64412 жыл бұрын

  • For clamping during glue-up, why not use a vacuum bag as well? It applies very even pressure, and is used a lot in guitar building, for example.

    @Runoratsu@Runoratsu2 жыл бұрын

    • The part pressed wasn’t filled evenly, only a few strips of foam inside, with vacuum it would have collapsed or the glue would burst out due to the pressure

      @leboxon9407@leboxon94075 ай бұрын

  • Nice work. I want to scan in my current wing so i can make a swan neck version (discontinued 8 years ago). You vids really make it possible!!

    @Tom2theY@Tom2theY2 жыл бұрын

  • Glad to see massive improvement vs previous wing 😁. Good job !

    @Mariuskcr@Mariuskcr2 жыл бұрын

  • You got that $400 ultrasonic cutter but you're still using the DIY pump lol. Bruh

    @philincaundo@philincaundo2 жыл бұрын

    • Ultrasonic avoid dust (is a health precaution) and the hand pump makes him work out (help benefit).

      @annakquinn7084@annakquinn70842 жыл бұрын

    • Petty 😂😂😂

      @Deathscroll41@Deathscroll4111 ай бұрын

    • He also has a BMW M4 and still uses a non-electric pump hahaha

      @emanuele7800@emanuele78007 ай бұрын

    • And baby wipes 😂

      @rarih100@rarih1007 ай бұрын

  • 와.... 이번건 진짜 처음부터 끝까지 넉놓고 쭉 봤어요

    @Rulino@Rulino2 жыл бұрын

  • This is dope af. Really wanna try this out during my break from school. And give a friend of mine his wing that he’s been asking for. Thank you.

    @miguelsalonga7729@miguelsalonga77292 жыл бұрын

  • Your work is amazing! Keep up the fantastic pieces you make! Absolutely love them!

    @jarnos1000@jarnos10002 жыл бұрын

  • Gorgeous as always! Sorry for your car though, I hope you guys settled it. Anyway, have you done a carbon fiber phone case before? That'd be dope! Since it's smaller, simpler, and also cheaper on the material too, maybe more people will be able to actually start learning how to create carbon fiber stuff

    @hafidzgi@hafidzgi2 жыл бұрын

    • Ah you already made that one, I don't even remember watching it😅

      @hafidzgi@hafidzgi2 жыл бұрын

  • I woul put positioning pins on the 3d printed molds. Makes it easier to assemble and align them correctly.

    @lotus-jps@lotus-jps2 жыл бұрын

  • I have no where near the kit for this but it does give me so insight into how to make one of of metal (Swan neck) at least, also just very much enjoyed the process

    @madmaz8890@madmaz88902 жыл бұрын

  • Hello, amazing work! Can you please explain why you used pva and ethanol in the process?

    @user-in7td4jl3o@user-in7td4jl3o9 ай бұрын

  • Работа шикарная как и всегда)🖐️👍

    @tetroniks312@tetroniks3122 жыл бұрын

  • Was the foam strips to help build up a lip when glueing the two sides together? Your technique for creating a solid edge/lip is much better and simpler in this video compared to your previous wing.

    @jimmyjones5787@jimmyjones5787 Жыл бұрын

  • 와아아 퀄리티 대박....금손이시군요....잘보고있습니다...굿좝....

    @user-vc1yr1qx6w@user-vc1yr1qx6w2 жыл бұрын

  • Amazing work as always bro, truly inspiring, I think I might have to attempt making some sideskirts after watching your videos

    @TeslaDIY@TeslaDIY2 жыл бұрын

    • Hi bro. Long time no see!! I hope your work goes well.

      @ECOLAPStudio@ECOLAPStudio2 жыл бұрын

  • 어쩌다 발견한영상이지만 엄청난 실력자이시다... 능력이 부럽네요 바로 구독박고 갑니다

    @worldmusic_korea492@worldmusic_korea492 Жыл бұрын

  • Awesome looking craftsmanship! Not my preferred style of wing but stunning looking work!

    @MJPilote@MJPilote Жыл бұрын

  • Ce travail de fou vraiment magnifique chapeau et respect ✌

    @brunoserif142@brunoserif1422 жыл бұрын

  • I died a little inside when you went straight to UV instead of a fast cut then polish on a pad. Great results still but all that hard work you deserved popping a little Meguiars on there haha

    @CYMotorsport@CYMotorsport11 ай бұрын

  • Glad you're back! Hope you're feeling better

    @2010karatekid@2010karatekid2 жыл бұрын

  • 대건에서 서브프레임 내린거 봤습니다 잘 수리하신것 같네요~ 차 여기저기 손수 꾸미신거보고 차에대한 애정과 손재주가 대단한분이구나 했습니다~ 재밌는 영상 잘봤습니다~

    @user-eb5tb8kv3y@user-eb5tb8kv3y2 жыл бұрын

  • 사고 난건 넘맘아픈데… 슈퍼맨이시네요…금손 !!! 대단하십니다

    @Ownerssk@Ownerssk2 жыл бұрын

  • 키야 완전 예술작품입니다~!

    @kingyun@kingyun2 жыл бұрын

  • Another beautiful work 😍 very nice job! I'm fan ❤️

    @j55scrazygamer70@j55scrazygamer702 жыл бұрын

  • Have you done any FEA on the wing uprights to see what force they fail at? Working on a carbon fiber wing project myself right now.

    @lukewilliamson74@lukewilliamson74 Жыл бұрын

  • A fantastic job.Thanks for sharing

    @franciscocastilloruiz6610@franciscocastilloruiz66102 жыл бұрын

  • Amazing work!!! 👏👏👏

    @bond2360@bond23602 жыл бұрын

  • Hey mate! Beautiful work, and also very complex. The small trunk lip, how are they made? Also empty inside? Thank you!

    @mihaidimoiu@mihaidimoiu2 жыл бұрын

  • Nice work! Did you understanf how much sandpaper will you use making carbon parts before you started? Because I did not :))

    @INTcraft@INTcraft2 жыл бұрын

  • I have seen that some runners who make their parts from carbon fiber, they put vinyl in the molds they make for even easier peeling and the surface is even smoother.

    @bercerker1@bercerker12 жыл бұрын

  • What kind of a parking garage is that? It looks more like a Luxury Auto gallery :D Great craftsmanship by the way.

    @aytunch@aytunch Жыл бұрын

  • Amazing man, wish I had these skills to create my own blue cf wing. I have some skills but this is beyond me.

    @TheSocialPraxis@TheSocialPraxis Жыл бұрын

  • 크게 안다치셔서 다행입니다. 항상 안전운행 하세요.

    @ljamie2103@ljamie21032 жыл бұрын

  • Glad you're ok and great work as always :)

    @jravelo2@jravelo22 жыл бұрын

  • Awesome work!

    @ODGColornChrome@ODGColornChrome2 жыл бұрын

  • Sick build! 🤙

    @kjeldsamsung@kjeldsamsung2 жыл бұрын

  • Very great guy many thanks Today i buil the master for miniskirt I want ask you where did you buy the ultrasonic cutter. An quastion 395$ is the cost? Thanks and see next time

    @Samuele.Deganello@Samuele.Deganello2 жыл бұрын

  • Hello, what software did you use to design 3d parts? Also, where did you buy spoiler accessories, screws, and attachments etc? Thanks!

    @fedorable1158@fedorable1158 Жыл бұрын

  • Love the outcome looks fantastic. I'm seriously looking at making one now that I have a large enough 3d printer. Can I ask what wing profile you used?

    @slaps101@slaps101 Жыл бұрын

  • 와~ 저런 사유가 있었군요~ ㄷㄷㄷ

    @bae_ru_ru@bae_ru_ru2 жыл бұрын

  • ☆완벽☆한 영상입니다. 잘봤습니다.

    @kizenakt.6651@kizenakt.66512 жыл бұрын

  • 스완넥 넘멋져요

    @user-fu4qz8qn9o@user-fu4qz8qn9o2 жыл бұрын

  • Magnifique merci !!!!

    @MrGundestrup29@MrGundestrup292 жыл бұрын

  • Awesome! What kind of filament and how much infill did you use for the 3d printed mold parts? 😊

    @MeSs2007@MeSs20072 жыл бұрын

    • Hello, friend I used PLA filament. And the molds are infilled 20%. I hope you helpful.

      @ECOLAPStudio@ECOLAPStudio2 жыл бұрын

  • Stunning work. Excellent!

    @mrsimo7144@mrsimo714410 ай бұрын

  • Mad skills! Wonderful video!

    @kylebell2365@kylebell2365 Жыл бұрын

  • 와 화 많이 나셨을 것 같은데 ㅜㅜ 많이 안다치신거 같아보여 다행이네요… diy 하시는 금손 같은 모습에 구독 박슴다!! ㅜㅜ

    @doctort1899@doctort18992 жыл бұрын

  • Any chance you have a DIY for making your hand vacuum pump setup? I've got a rotary pump but its quite difficult to get an even pressure pull before it just sucks up the vacuum bag and stops working.

    @ryanhatton6095@ryanhatton60952 жыл бұрын

  • 저도 며칠전 비슷하게 후미 사고 났습니다ㅜㅜ 몸은 괜찮으신가요? 몸조리 잘하세요....그리고 기더리던 윙 너무 멋집니다!!!! 판매하시면 사고싶을 정도에요!

    @user-xp6jy5lb8x@user-xp6jy5lb8x2 жыл бұрын

  • 굿입니다!!

    @haneu11@haneu112 жыл бұрын

  • Looks good!! what is the white electrical tool you are using for cutting the cured carbon fibre?

    @njrmodelling@njrmodelling2 жыл бұрын

  • the furious typing sold me, I'm subscribed

    @yassinahmed456@yassinahmed4562 жыл бұрын

  • which Programm have you used for the Design and Blueprint ? Nico work, greetings from germany 👍🏻

    @KroGym2011@KroGym2011 Жыл бұрын

  • You did a great job and spent a lot of time with the sanding block - but the result is totally worth it! 👍😎👍 Maybe a fill primer would be a quicker way to eliminate the 3D print structures (instead of the gel-coat), because the primer is way more easy to level. But I hope, you won't have to build another one - at least not for the same reason! Have fun with your great looking car! Greetings all the way from Berlin!

    @WestBerlinCustoms@WestBerlinCustoms2 жыл бұрын

    • Epoxy gelcoat bonds much more stronger and less likely to come apart when de-molding. Maybe with a one-time only use mold, fill primer is fine. But with the amount of materials used just for the molds, it would seem much better to have everything stronger for producing multiple parts before if that is his case. Maybe he just has gelcoat handy on him so he just used it.

      @voongnz@voongnz2 жыл бұрын

    • @@voongnz Your suggestions might be right. I used.plastic primer combined with a high build primer with ABS and PLA prints in the past and had no adhesion issues. As long as the mold is waxed and prepped with PVA, like perfectly shown in the video, filler should be all right. But that's just a little recommendation, the wing came out great and reality proves, there are a lot options to find a solution. 💪

      @WestBerlinCustoms@WestBerlinCustoms2 жыл бұрын

    • @@WestBerlinCustoms yes absolutely, proper application of release agents and mold design is what matters the most when de-molding and having the mold and part in good condition after. Yeah many different processes for the solution, many people just apply a single layer of gelcoat and let it self-level for a smooth finish. So even his example is different.

      @voongnz@voongnz2 жыл бұрын

  • Nice wing bro, thanks for sharing

    @RajawaliCarbon@RajawaliCarbon2 жыл бұрын

  • Have you tried making 3DP molds that interlock with a tab and slot design?

    @bmwblaise@bmwblaise Жыл бұрын

  • 대밖🔥 항상 열정과 성공을 유지하세요. KEEP DRIVING SAFE

    @adiprasongko1001@adiprasongko10012 жыл бұрын

  • How did you machine the metal parts for the mount? Is there a video on that?

    @tomonsterheard@tomonsterheard10 ай бұрын

  • very interesting idea as a maker, but couldn't you make this design into an active aero system? it seems you have the adjustment design well, but if you could add some strong motors to the rear wing, it could have the wing angle under braking, for example

    @blank-re8qv@blank-re8qv2 жыл бұрын

  • 와..금손이시네요

    @user-rj8kg2sb2c@user-rj8kg2sb2c2 жыл бұрын

  • 센세 안녕하세요~ 영상 잘보고 있슴다. 여쭙고자 하는게 있습니다. 오븐에서 열처리 하는거랑 안하는거랑은 어떤 차이가 발생하나요? 감사합니다

    @user-ce5bb6qo7z@user-ce5bb6qo7z Жыл бұрын

  • How many meters of fiber did you use approximately ? Great job !!

    @gonzalopizarrosanchez2081@gonzalopizarrosanchez2081 Жыл бұрын

  • Love your work strive to be as good as you. Question, Where can I find the sanding block you can adjust by angle?

    @z32enthusiast58@z32enthusiast58 Жыл бұрын

    • hello friend. The sanding block is from Sia.

      @ECOLAPStudio@ECOLAPStudio Жыл бұрын

  • Well done!

    @Tristan-el7jx@Tristan-el7jx2 жыл бұрын

  • 초음파컷터 영업뽐뿌받고갑니다.. 중간 검은 본드도 겁나 혹하네요.. 작업성 무엇인가요 ㅋㅋㅋㅋ 매번 눈팅만 하다가 덧글 남겨봅니다 :D

    @campingclock@campingclock2 жыл бұрын

  • Yes u did it like I said! Really nice mate

    @testaccount07@testaccount072 жыл бұрын

  • 분노의 스완넥 만들기!!

    @user-bc3kq4cv7h@user-bc3kq4cv7h2 жыл бұрын

  • The fact that you made it seem like you did this to be petty to the other driver makes this so much better.

    @jackbankson927@jackbankson927 Жыл бұрын

  • very good video, very inspiring. Great Work 😎👍🏼

    @Phil-bs2fn@Phil-bs2fn2 жыл бұрын

  • Awesome! How much down force does it create?

    @elvis_chen@elvis_chen2 жыл бұрын

  • Great job!!!

    @bigmanstoys1640@bigmanstoys16402 жыл бұрын

  • Great video but, how did you do the spoiler stalks? Your video focus' not he wing more and they sort of just happen. How many layers of carbon did you use to make them strong enough? Are they hollow, made of 2 parts glued together like the wing?

    @KingandTitanRacing@KingandTitanRacing4 ай бұрын

  • genio....buen trabajo

    @viajando-con-edgar@viajando-con-edgar2 жыл бұрын

  • Full carbon fibre bumper lessgo 🔥

    @nazzharmi@nazzharmi2 жыл бұрын

  • cool video, how did you choose your airfoil for the spoiler? also do you have any videos of the spoiler while driving the vehicle?

    @tomonsterheard@tomonsterheard Жыл бұрын

  • Siempre al pendiente de tus videos😃Saludos desde México!

    @pablovazquez6130@pablovazquez61302 жыл бұрын

  • 와...진짜 금손 이시다... 거기다...졸부...👍

    @user-ry2gx4bp6r@user-ry2gx4bp6r Жыл бұрын

  • Great job. 👍🏼 where did you get that adjustable sanding block???

    @taurus629@taurus629 Жыл бұрын

    • Hello friend. The sanding block is from Sia.

      @ECOLAPStudio@ECOLAPStudio Жыл бұрын

  • 많이 안다치신거 같아서 다행입니다. 궁금한게 있는데 저렇게 diy하신 파트의 보상은 어떻게 되나요?? 저걸 어떻게 비용으로 책정해요... 아까워요

    @Dekpk90@Dekpk902 жыл бұрын

    • 안녕하세요. 기본적으로 재료비를 기준으로 보상이되며, 일반적으로 시중에 판매되는 제품의 가격을 참고해서 보상금이 책정되더군요.

      @ECOLAPStudio@ECOLAPStudio2 жыл бұрын

  • very nice video!! You should do a video where you show the M4 and the mod list

    @user-zt4kz8rx8k@user-zt4kz8rx8k2 жыл бұрын

  • 와... 가지고싶네용

    @stv3558@stv35582 жыл бұрын

  • How do you know where to cut exactly once it's out of the mold so the two halves align perfectly?

    @pb6839@pb6839 Жыл бұрын

  • Great video! One curiosity, how do to ensure you do not get galvanic corrosion with carbon and metal bolts?

    @chiefychief23@chiefychief232 жыл бұрын

    • Good question. Normally contact areas have a layer of fiberglass in between to act as a barrier to prevent conductivity. Didn't see it here as part of the build.

      @nottherealjk@nottherealjk2 жыл бұрын

    • ​@@nottherealjk Yeah I'm using aluminum to mount some items on a monocoque I am making. I have read the info and plan on using a thin sheet of fiberglass over the aluminum plates. But IDK.. I heard that GALV corrosion will weaken the carbon (like rust or something?).. If you learn anything about it on your project write me back.. Thanks DMAX motion sim

      @DMAX_DIY@DMAX_DIY2 жыл бұрын

    • Yeah same question here .. I'm using aluminum to mount some items on a monocoque I am making. I have read the info and plan on using a thin sheet of fiberglass over the aluminum plates. But IDK.. I heard that GALV corrosion will weaken the carbon (like rust or something?).. If you learn anything about it on your project write me back.. Thanks DMAX motion sim

      @DMAX_DIY@DMAX_DIY2 жыл бұрын

  • 사고이후 처리는 어떻게되었나요? 예를들어 렌트카를 어떤걸로 받으셨는지

    @looter4593@looter45932 жыл бұрын

  • 사고난것은 안타깝지만 멋진윙이 생겼네요 수고하셨어요

    @stevekim673@stevekim6732 жыл бұрын

  • 컷팅하는 기계가 어떤건가요?

    @user-ec6gg7jb8d@user-ec6gg7jb8d4 ай бұрын

  • Love this! ❤️

    @danielduchon1035@danielduchon1035 Жыл бұрын

  • What is the length of this wing? Looks so good!

    @ITOzann@ITOzann Жыл бұрын

  • 안녕하세요 혹시 이 쓰고남은 몰드 살수 있을까요 ㅠㅠ

    @williamyu94@williamyu94 Жыл бұрын

  • Hi do you have a link to find your vaccum pump? Thanks 👍

    @remiclaessens97@remiclaessens972 жыл бұрын

  • 영상 시간가는줄모르고 잘 봤어요~ 혹시 기존 사고전 윙 구입처좀알수있ㄹ가요??

    @user-gm1il1sh9e@user-gm1il1sh9e Жыл бұрын

  • Great work! My only concern i, that Water could get in from the swan neck holders, inbetween the two spoiler halfs

    @nickhofmann30@nickhofmann30 Жыл бұрын

  • I love your videos dude, what is the best type of carbon cloth for parts.

    @msr3276@msr32762 жыл бұрын

    • Hi friend Basically, I use twill carbon fiber, which is used a lot. It is the most common and most used carbon fiber fabric.

      @ECOLAPStudio@ECOLAPStudio2 жыл бұрын

  • 우리나라에도 이런 능력자가 있다니 놀라울 따름입니다 O.O

    @styxray1418@styxray14182 жыл бұрын

  • 헐.. 사고라니 ㅠㅠ 많이 안다치셔서 다행입니다

    @daesik1112@daesik11122 жыл бұрын

  • 멋지십니다 직접 제작이시라니 ㄷㄷㄷ 마지막 주차장은 혹 일산이 아니실런지??^^; 아는 차들이 나온것같아서요 , 영상 너무 재미있게 잘 봤습니다!

    @wenchia_@wenchia_2 жыл бұрын

  • Quiero uno igual! A cuanto lo venden?

    @pedro.g8726@pedro.g87262 жыл бұрын

  • Is this a Creality CR-10S Pro printer? Can I do the same thing on a Creality 3D Ender 3 V2 printer?

    @jaypabloPL@jaypabloPL Жыл бұрын
KZhead