How To Balance Tires - Eastwood Electronic Wheel & Tire Balancer Machine - Eastwood
In this video Randy is going to go over how to use the Electronic Wheel balancer from Eastwood. This machine is great for small business, race shops, or even the home hobbyist.
Get one HERE: www.eastwood.com/eastwood-ele...
The Eastwood Electronic Wheel Balancer brings the convenience and economy of a professional, high precision tire and wheel Balancer to the well-equipped DIY or race shop. Allows quick balancing and guidance for applying clip-on or stick-on weights to a variety of wheel types, sizes and materials.
im Diameter Range: 10” to 24”
Rim Width Range: 1.5” to 20”
Maximum Tire Diameter : 34” [864mm]
Maximum Tire Weight : 143lbs [65kg]
Rotating Speed: 200 RPM
Measurement Cycle Time: 8 Seconds
Maximum Out of Balance Range: 0.25 to 35 Oz. [1 to 999 Grams]
Power Requirements: 120 VAC, 60hz.
For more information on Eastwood products visit www.eastwood.com or stay connected with the team via:
Facebook - / eastwoodcompany
Instagram - / eastwoodco
Blog - www.eastwood.com/blog
Eastwood has everything you need to do the job right when you're restoring a car, truck or motorcycle - from welders to paint and everything in between.
So you can mount a 45 inch tire on your tire change but can only balance up to 34 inches?? That's a bit counterintuitive isn't it??
Wheel diameter is written on the tire
any body bought this machine and how well do they like it ... any down flaws ...
im looking to buy one for personal use will this work for my motorcycles too.
I wanted to ask if you balance a tire and wheel remove it from the machine then put it back on the machine should that tire and wheel still be showing balanced? thanks
A balanced tire is a balanced tire. Should still be the same.
Who came here from the video about the old German analog Balancer machine? :)
Hello can you explain how to balancing wheel with sticky weights and how it is measured
Yeah I’m on the same boat.
I just got new tires and saw that one tire don't have any balancing weights. Is that normal?
Weight amounts vary depending on the wheel/tire combo so sometimes you don't need any - sometimes you need a fair amount.
can a tire to be unbalanced inside and outside same time?
Yes, it can
Does it work for motorcycle tires?
This setup is designed for automotive/truck tires. Motorcycle shops have specialty equipment to handle mounting/balancing.
I got 4 new tires and 3 of them are balanced outside with adhesive weight but one tire is balanced inside with one clip weight. Is that considered normal?
It probably has to do with how the wheels are made - adhesive weights are nice because you don't have to hammer on the outer lip of the wheel and it looks better and/or there isn't an outside lip. The inner side probably got a hammer on weight because it has a lip and they're less likely to fall off. It could have simply been the shop's preference.
@@eastwoodcothank you
Yah shop preference seems to be the thing. At one Americas Tire location they used adhesive, at another clip on.
Look like Michael J Fox.
Nu