KZhead
Тәжірибелік нұсқаулар және стиль

Super Glue and Baking Soda Miracle! Pour Glue on Baking soda and Amaze With Results

Creation Holic
2023 ж. 16 Шіл.
3 078 621 Рет қаралды
Жүктеу

Hello everyone! You are watching video "Super Glue and Baking Soda Miracle! Pour Glue on Baking soda and Amaze With Results"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#superglue #diy #tipsandtricks #bakingsoda

Пікірлер

  • One thing none of these videos warn you about is the fumes when super glue and bicarbonate are mixed. First time I did it they nearly knocked me out. Do it outdoors or in a very well-ventilated area and wear a mask.

    @gretasnipe7631@gretasnipe76319 ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic1019 ай бұрын

    • There's no reaction. That smoke is just normal for "super glue" when it's hardening. That's the normal glue curing reaction.

      @suprememasteroftheuniverse@suprememasteroftheuniverse9 ай бұрын

    • ​@@suprememasteroftheuniverse "That smoke" (there is no smoke, no combustion is taking place so no products of combustion are present, it's fumes, as the OP said, from the purely chemical reaction of the curing process) "is just normal for super glue" (which is why the instructions for use tell you to work in a well-ventilated area, like the OP said). "That's the normal glue curing reaction." Quite correct, and perfectly in support of the OP's statement of warning, so why did you start your response with the blatantly incorrect "There's no reaction." It makes the rest of your statement redundant in a daft way: "I can't make up my mind which is correct, the voices are telling me two contradictory facts but they are always true so I believe what they say to me..." Excessive fumes can be quite debilitating for some -- they especially create an acidic reaction to tears, like when you cut onions but worse, and if you breathe them in you can be in a world of pain for a short time. Cyanoacrylate deposition in a fume cabinet is a classic way of lifting evidence off delicate surfaces, for instance, showing how much fumes can be released, and there's even various shots of fumes in this video :-) The OP simply gave a very wise warning _from direct personal experience_ given the abnormal amount of super glue used in these methods, so why go and make yourself look like a fool? I'm sure you're not really...

      @Dranok1@Dranok19 ай бұрын

    • Thanks for the heads-up! Much appreciated.

      @BLAZE084@BLAZE0849 ай бұрын

    • i don t wear Mask anymore ! Fuck the COVID !

      @valentinanon7883@valentinanon78839 ай бұрын

  • The superglue for bolt removal is a real eye-opener! The knurled knob at the end is rather amazing, too!

    @johngraves6878@johngraves68789 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

    • Those are the two I came to comment on also! I've seen various tricks to tackle a rounded out screw head but never thought to mould a new screwdriver impression on the top -- brilliant! (So long as the screw isn't jammed requiring excessive effort, I doubt this is anywhere near as strong as the original;-)

      @Dranok1@Dranok19 ай бұрын

    • How the knurled knob comes smoothly out of the spanner remains a mystery.

      @bangla70s@bangla70s8 ай бұрын

    • ​@@bangla70s Just prior to fabricating the knob, the OP sprayed the spanner with some kind of lubricant that prevented the glue/baking soda mixture from bonding with the metal (see at 5:30 of the video)

      @gungadin164@gungadin1648 ай бұрын

    • What did he spray the inside of the wrench with?

      @FreshandFelicia@FreshandFelicia8 ай бұрын

  • I’ve been doing this for years now and it is a miracle. Anything superglue sticks to having baking soda strengthens it ten fold. Two things you must remember, 1) you can’t paint over it and for a finish look it is very difficult to make it look clean and 2) this one is very VERY IMPORTANT, DO NOT GET IT ON YOUR SKIN!!! I can’t stress this enough, it will burn you and nearly impossible to get off without taking skin with it!!

    @scottpaget2925@scottpaget29259 ай бұрын

    • Super glue can be easily removed from skin using acetone (the same product used to remove nail polish). Of course it should be always handled with care and, if possible, wear protective glasses.

      @nicolaottomano@nicolaottomano9 ай бұрын

    • 6:10 shows it can be painted.

      @Throckmorton.Scribblemonger@Throckmorton.Scribblemonger9 ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic1019 ай бұрын

    • Pictures? lol

      @CraigGrant-sh3in@CraigGrant-sh3in9 ай бұрын

    • @@nicolaottomano "easily removed from skin using acetone" Acetone is nasty stuff to be putting it on your skin. Regardless, I think the OP was most concerned with the HEAT from the baking soda and glue reaction. Anyway, as many have posted, do this kind of thing in a very well ventilated place AND wear gloves or whatever to protect your skin.

      @fewwiggle@fewwiggle9 ай бұрын

  • 素晴らしいアイデアです！ ネジ頭の修復などとても助かります。 epoxy putty　よりも遥かに手軽で安全で、身近な材料で出来る事がとても素晴らしいです。 よても良い情報を共有していただきありがとうございます。

    @neo-kq9xk@neo-kq9xk10 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • 素晴らしい！ 勉強になりました。ありがとうございます。

    @250cb7@250cb79 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your support

      @creationholic101@creationholic1019 ай бұрын

  • When doing larger repairs you should always add the baking soda to the glue or you'll get pockets of unglued soda, you can see them clearly on the corner repair.

    @eunc00@eunc009 ай бұрын

    • Hello! thanks for your recommendation. Wish you all the best!

      @creationholic101@creationholic1019 ай бұрын

  • Greatly admire your skill. Thank you for another method I can use. THANK YOU!

    @dougbas3980@dougbas39809 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your support

      @creationholic101@creationholic1019 ай бұрын

  • これはいいことを教えて頂きました。プラリペアより安価に使用できそうですね。ありがとうございます！

    @aramakizake3948@aramakizake394810 ай бұрын

    • Hello. Welcome to my channel. Thank you for your feedback!

      @creationholic101@creationholic10110 ай бұрын

  • Very economical, worth saving. Thank you and God bless you.

    @luthgardabadawen5617@luthgardabadawen56179 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • I had heard that this combination was great for fixing a guitar nut slot that has been cut too deep. I never would have guessed it to be this robust, though. Thanks for the video!

    @genrlgadget@genrlgadget9 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

    • Yeah, works well for worn nut slots!

      @theboofin@theboofin9 ай бұрын

    • Yep, I've done this in the past.

      @IanDarley@IanDarley9 ай бұрын

  • *Whenever I'm baking a cake, I always add a few drops of cyano superglue along with the baking soda. It gives my cakes a more crunchy texture and makes them resistant to eegits who try to break them by tapping them with the plastic handle of a screwdriver.*

    @fluchterschoen@fluchterschoen8 ай бұрын

    • 🎂👍

      @terryboyer1342@terryboyer13428 ай бұрын

    • 😌

      @creationholic101@creationholic1018 ай бұрын

    • Lisa Douglas…?

      @dotarsojat7725@dotarsojat77258 ай бұрын

    • Also works for uranium cake

      @tommyl5319@tommyl53198 ай бұрын

    • I am reliably informed that this is the secret ingredient in Dwarf Bread, as used on the discworld(R).

      @trueriver1950@trueriver19508 ай бұрын

  • The only thing that my superglue will fixate absolutely rock solid is the cap on the bottle.

    @wingnut2893@wingnut28938 ай бұрын

    • always store super glue upright....... even the little tube ones

      @robb8235@robb82358 ай бұрын

  • 思った以上に便利で素敵なアイディアですね🎉 重曹と接着剤が反応して固体化するのは初めて知りました！ 教えてくださりありがとうございます😊

    @user-kitune-densya-game@user-kitune-densya-game7 ай бұрын

    • Hello! Welcome to Creation Holic channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!

      @creationholic101@creationholic1017 ай бұрын

  • That trick has been used in building balsa wood model air planes for over 40 years! Works very well! 👍

    @timfolland420@timfolland4208 ай бұрын

    • Thanks so much for your information

      @creationholic101@creationholic1018 ай бұрын

  • WOW!!! Thank you so much for sharing your tips and tricks with all of us and I’m very impressed 😊

    @Alotipsalo@Alotipsalo7 ай бұрын

    • You are so welcome!

      @creationholic101@creationholic1017 ай бұрын

  • Super glue has always let me down and never stuck what i wanted to stick back together - BUT it never failed at sticking my fingers together !

    @feeltheforce10@feeltheforce109 ай бұрын

    • I am sorry to hear that. You might wear glove while using super glue. Have you try using salt water when super glue stick to your finger?

      @creationholic101@creationholic1019 ай бұрын

    • Or sticking the cap onto the tube

      @trueriver1950@trueriver19509 ай бұрын

    • Super glue works perfectly on skin. It really should be called skin glue.

      @testodude@testodude8 ай бұрын

    • @@testodude works perfectly on dry or dryish skin. It's actually slightly soluble in water, so fingers stuck together can be separated by using a blunt instrument such as the handle of a spoon to gradually prise them apart under running water. It's a slow job, typically ten to twenty minutes, but preferable to paying doctor's bills. Even better if available is to use the solvents designed to remove super glue. Fun fact: Police teams attending protests where the protesters have glued their hands to fixed objects now take the solvent with them as a matter of standard operating procedure, reducing the effectiveness of the protest tactic.

      @trueriver1950@trueriver19508 ай бұрын

  • I REALLY LIKE the stripped + head screw trick : fantastic! (South Africa)

    @tyronefrielinghaus3467@tyronefrielinghaus346710 ай бұрын

    • Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

      @creationholic101@creationholic10110 ай бұрын

    • 😅Qd

      @mehmetmoral4125@mehmetmoral412510 ай бұрын

    • ​😅.o

      @mehmetmoral4125@mehmetmoral412510 ай бұрын

  • Keo siêu dính và phép mầu Ban King xo da rất hữu ích. Cảm ơn bạn đã chia sẻ ❤

    @uckhai-othicuocsong@uckhai-othicuocsong9 ай бұрын

  • これはすごい発見!!!いろいろなことに使えそう🥺✨

    @mmkl4791@mmkl479110 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

      @creationholic101@creationholic10110 ай бұрын

    • どのケースも実際に困った事があるから、どれも関心してしまった。

      @user-sz4vq8kc4m@user-sz4vq8kc4m9 ай бұрын

  • Muito obrigado pela aula. Será muito útil no dia a dia. Saudações do Brasil 🇧🇷.

    @almirdoudement6514@almirdoudement65149 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1017 ай бұрын

  • This is brilliant! Thank you!❤

    @FidoHouse@FidoHouse9 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • That stripped screw technique is crazy useful!

    @michaelaiello9525@michaelaiello95258 ай бұрын

  • Incrível! Recuperei o puxador de um pote de acrílico cuja tampa é vedada sob a pressão que é feita justamente por esse puxador. É uma peça bem pequena e ficou muito mais resistente do que a estrutura original. Valeu mesmo!!!!

    @maraprotta2339@maraprotta233910 ай бұрын

    • Hello. Thank you so much for your positive feedback! Wishing you health and happiness always!

      @creationholic101@creationholic10110 ай бұрын

  • Great stuff i had forgotten about doing this with baking soda. Step 7: Unglue your hand to whatever you superglued :)

    @ATomRileyA@ATomRileyA8 ай бұрын

  • It's very useful. Thank you.

    @laisyu5004@laisyu500410 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic10110 ай бұрын

  • 好多有趣又有用的使用方式 👍🏻

    @AshH0220@AshH022010 ай бұрын

    • Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

      @creationholic101@creationholic1019 ай бұрын

    • kzhead.info/sun/m9F9mLJtsWprlp8/bejne.html

      @TizianoVian@TizianoVian9 ай бұрын

  • I have known about this trick for a while. My guitar teacher told me about it, but I didn’t know it had so many cool uses. Great vid.

    @TamCatG@TamCatG9 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

    • Nice! I'm curious, how do you use this on a guitar?

      @dannainan@dannainan9 ай бұрын

    • @@dannainanif you have a dead or buzzing string from a worn or cracked bone or plastic nut, or need to raise the action, you use it to fill in the slot that the string sits on. Let it harden overnight, and gently use a nail file to shape the nut to match, then carefully file the slot to the height you need. Also it makes a good filler for a quick repair in the binding, wood, inlays, or saddle on an acoustic.

      @TamCatG@TamCatG9 ай бұрын

    • @@dannainandepend on what you need to do.

      @kfox153@kfox1538 ай бұрын

    • It’s great for guitar nut and acoustic saddle repair

      @darrenwatson874@darrenwatson8748 ай бұрын

  • Due to previous experience I would never use superglue with bare hands, I always wear latex gloves.

    @flipper2392@flipper23928 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your support

      @creationholic101@creationholic1017 ай бұрын

  • Ahoj. Ten poslední nápad je pro mne úžasný. Tímto způsobem vyrobíme šroub ke stativu, který není k sehnání. Díky zdravím z Czech republik 🇨🇿 Prag. 👍😄

    @petrvesely9936@petrvesely99369 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • すげっ！動画ありがとうございます。 色んな事に応用出来そうです。

    @user-bt9us2cs4b@user-bt9us2cs4b9 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • So worth you making this video. Thank you! I'm going to try it on the geogrid sections - shaping them has been troublesome.

    @HomeDIYSStuff@HomeDIYSStuff9 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!

      @creationholic101@creationholic1019 ай бұрын

  • A big 👍for this Vid. I discovered randomly that wallpaper paste and paper can become very solid. The smaller the scraps of paper, the stronger the connection. If you ground paper almost to dust and mixed it with paste to form a pizza dough-like mass, shaped it into a desired shape and then dried it, you had a very light and incredibly stable mass.

    @pauld.9856@pauld.98569 ай бұрын

    • Hello! Welcome to Creation Holic channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!

      @creationholic101@creationholic1019 ай бұрын

    • yes indeed! I believe you have discovered... Papier-mâché! It's a classic modelling material, well worth investigating

      @clearwoodcouk@clearwoodcouk8 ай бұрын

    • Samurai made their armor from this type of material. Laminated paper.

      @stevet8833@stevet88338 ай бұрын

    • @@stevet8833 I'm afraid you've got that wrong Steve, Samurai armor was in fact constructed of iron plates, joined by cords or leather straps. Papier mache is great stuff, but it's no match for steel swords, spears, or bullets. There's a comprehensive history on Wikipedia...

      @clearwoodcouk@clearwoodcouk8 ай бұрын

    • @@clearwoodcouk Yes, it's probably made of the same material, but I was amazed that it was so much harder and more stable than what I know, which is used in egg cartons, for example. What I got from it would actually have repelled clubs or hammer-like weapons. I can imagine that the samurais experimented with it. 😁

      @pauld.9856@pauld.98568 ай бұрын

  • Great ideas. That black knob at the end... I have that exact problem with exactly the same lamp ... what did you spray the wrench with to avoid sticking? WD-40? A lubricant?

    @VideoGuyHawaii@VideoGuyHawaii10 ай бұрын

    • I am using RP7 as lubricant. Wishing you all good things!

      @creationholic101@creationholic10110 ай бұрын

  • Hola amigo...me gustaron las ideas 4 y 6...y también lo mágico que es el bicarbonato junto con el pegamento...saludos desde Chile 🇨🇱

    @jorgefrez2294@jorgefrez22948 ай бұрын

    • Thanks a lot 😍

      @creationholic101@creationholic1018 ай бұрын

  • 很實用的介紹，受用無窮

    @evanlee8922@evanlee892210 ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic10110 ай бұрын

  • めちゃくちゃ役立つ情報を提供して頂いてありがとうございます。 いいねだけでなく、チャンネル登録もさせて頂きました。

    @user-im6mf2zv9y@user-im6mf2zv9y9 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your support

      @creationholic101@creationholic1019 ай бұрын

  • You can replace baking soda with cotton. Due to fibers, cotton is stronger compared to baking soda along its threads

    @CemKalyoncu@CemKalyoncu10 ай бұрын

    • CA Glue + cotton gets very, very hot

      @dcbdcbdcb@dcbdcbdcb10 ай бұрын

    • @@dcbdcbdcb I don't think baking soda stays at the same temperature but you are right, it get quite hot, even smoking hot at times but I don't think it will get hot enough to ignite.

      @CemKalyoncu@CemKalyoncu10 ай бұрын

    • hello and thank you very much for your recommendation! Wish you the best!

      @creationholic101@creationholic1019 ай бұрын

    • Wouldn't it be more difficult to apply than bicarbonate of soda?

      @TheKlink@TheKlink9 ай бұрын

    • I've seen this done with steel wool too. Perhaps the combination with baking soda would be stronger still.

      @MartinMaat@MartinMaat9 ай бұрын

  • Félicitations pour ce superbe partage. Un tout grand merci de Belgique. Soyez heureux ❤

    @oufdii7559@oufdii75599 ай бұрын

    • Hello! welcome to Creation Holic channel. I am very happy to read your comment. Wish you have a nice day!

      @creationholic101@creationholic1019 ай бұрын

  • Hola Dios les bendiga siempre a ti a tus seres queridos y a tus seguidores. Soy Carmen del edo de México.muchas felicidades. En hr buena.

    @MariaGarcia-er3se@MariaGarcia-er3se10 ай бұрын

    • Hello! Welcome to my channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!

      @creationholic101@creationholic10110 ай бұрын

  • 素晴らしいアイデアだと思います。問題は単価ですね。 ところで、長期間使用した場合の耐久性や耐水性はいかがでしょうか？

    @otousansanjino4495@otousansanjino449510 ай бұрын

    • Mixture of super glue and baking soda can create a waterproof seal. When combined, super glue (cyanoacrylate adhesive) and baking soda undergo a chemical reaction that results in a durable and hard substance. This mixture can be used for various applications, including filling gaps, repairing items, and creating a waterproof barrier.

      @creationholic101@creationholic10110 ай бұрын

  • Good tips. Thanks. For tip #5 at <a href="#" class="seekto" data-time="247">4:07</a>, probably quicker to use a toothpick (equivalent) or two in the hole instead.

    @Dave--FkTheDeepstate@Dave--FkTheDeepstate8 ай бұрын

    • Hello! thanks for your recommendation. Wish you all the best!

      @creationholic101@creationholic1018 ай бұрын

  • This is amazing! I was shocked when I saw this video This enriches my life. thank you! From Japan with love❤

    @user-so1kt8jo7i@user-so1kt8jo7i7 ай бұрын

    • Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

      @creationholic101@creationholic1017 ай бұрын

  • From Britany in France. Good ideas. A bientôt

    @lydiequilliot5288@lydiequilliot52887 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1016 ай бұрын

  • Doc told me I broke my leg, and I needed a cast. "No thanks," I replied. Went straight home and reset my compound fracture with a little super glue and baking soda. I was fine in a matter of minutes!

    @jmd12127@jmd121279 ай бұрын

    • US healthcare.

      @Throckmorton.Scribblemonger@Throckmorton.Scribblemonger9 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1019 ай бұрын

    • Yeah, and how are the 3rd degree burns doing?

      @BigHenFor@BigHenFor9 ай бұрын

  • I’m convinced that this guy could build a house with super glue and baking soda

    @HeavenlyGust@HeavenlyGust9 ай бұрын

    • Welcome to Creation Holic channel! Hope you have a good time while watching the video

      @creationholic101@creationholic1019 ай бұрын

  • Merci beaucoup pour cette utilisation géniale! Bonjour de France.

    @lalli2540@lalli25409 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • I will be useing these ideas in the future I'm sure, thanks

    @MichaelSygo1@MichaelSygo19 ай бұрын

    • Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!

      @creationholic101@creationholic1019 ай бұрын

  • I never cease to wonder just how many times KZhead contributors can rediscover this well-known composite.

    @MirlitronOne@MirlitronOne9 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1019 ай бұрын

    • Turns out it wasn’t well-known to me, and I’m no spring chicken. So glad that I stumbled across this video!

      @SpamSucker@SpamSucker8 ай бұрын

  • 나사는 진짜 천재적이에요 👍👍👍

    @pffpffhaha8305@pffpffhaha830510 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic10110 ай бұрын

  • I thought the second one was going to be a ping-pong table for a pair of mice

    @bobl.1044@bobl.10449 ай бұрын

    • Thank you for sharing your feedback and expressing your perspective

      @creationholic101@creationholic1019 ай бұрын

  • Muy buenos videos , desde Gran Canaria

    @antonioalfonso2007@antonioalfonso20078 ай бұрын

  • Try simply flour, I want to figure out if it's the texture that does that, or specifically a chemical compound of soda, because it might be just a powdery stuff and not specifically a soda.

    @BIOSHOCKFOXX@BIOSHOCKFOXX9 ай бұрын

    • Not sure about flour but I have used graphite powder when I needed it to be black.

      @joeuser633@joeuser6338 ай бұрын

    • I tried flour and it didn't work

      @creationholic101@creationholic1017 ай бұрын

  • 塑料鎖點斷裂，用瞬間膠+蘇打粉或香煙濾棉黏回去後，強度比斷掉之前更強更堅固，也是可以省一筆錢的做法。

    @akatsuki6879@akatsuki687910 ай бұрын

    • hello and thank you very much for your recommendation! Wish you the best!

      @creationholic101@creationholic10110 ай бұрын

  • 有益で，安全な情報をいただきました。　日常生活で役に立ちそうです。　ありがとうございました。

    @user-mm2dk9pn4o@user-mm2dk9pn4o10 ай бұрын

    • Hello. Welcome to my channel. Thank you for your feedback!

      @creationholic101@creationholic10110 ай бұрын

  • Hello! this is wonder idea! I've had the scales fall from my eyes! I'll use this idea right away. Thank you!

    @user-hh2vu5wm6l@user-hh2vu5wm6l3 ай бұрын

    • Glad it was helpful!

      @creationholic101@creationholic1013 ай бұрын

  • The stripped screw head and the lamp thumb screw are amazing.

    @Feed_The_Fink@Feed_The_Fink2 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1012 ай бұрын

  • Ground wood charcoal, pure cocoa powder and used coffee grinds can also achieve the same results, virtually any powder will work.

    @peekaboo4390@peekaboo43908 ай бұрын

    • Ooh, and those wouldn't produce fumes in the same way as baking soda does. Very good info!

      @TheRationalPi@TheRationalPi8 ай бұрын

    • Use Decaf grounds, if you’re gluing close to bedtime!

      @dotarsojat7725@dotarsojat77258 ай бұрын

    • @@TheRationalPi Cocoa powder and wood charcoal can also be used in two part epoxy for repairing bakelite the black or brown versions of it. I restore among other things old vintage tube radios and this method works a treat along with using superglue with cocoa or charcoal.

      @peekaboo4390@peekaboo43908 ай бұрын

    • what about baby powder and tang?

      @testodude@testodude8 ай бұрын

    • @@testodude As a filler or a drink combination?

      @TheRationalPi@TheRationalPi8 ай бұрын

  • これは良いや！ また１つ利口になったよ。

    @user-xk3zo8xx6f@user-xk3zo8xx6f8 ай бұрын

  • This is wonderful I have taught you good things

    @kei_midkick_728@kei_midkick_72810 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic10110 ай бұрын

  • The stripped screw idea is huge, what a good application

    @minitanku@minitanku8 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1017 ай бұрын

  • これと同じ原理だと思いますが、プラスチック成型材として、粉に液体をかけて固まるものが市販で売っています。 重曹と瞬間接着剤で出来るんですね！　教えて頂きありがとうございます。

    @kamui607@kamui60710 ай бұрын

    • Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

      @creationholic101@creationholic10110 ай бұрын

    • 本当ですね！プラリペアお高いですがこれだと500円位で出来て嬉しい～

      @user-gt9kz5mu1r@user-gt9kz5mu1r10 ай бұрын

  • I was just wondering what the “setting” time is for the glue/baking soda mix is? Is there time to apply it and work it into gaps? I’m going to try it to fill a gap between the hood and fenders on a model car I’m building. Will it work with Gorilla Glue CA Gel? It’s a bit thicker than standard CA glue.

    @medic53067@medic530679 ай бұрын

    • instant

      @FLY2KO@FLY2KO9 ай бұрын

    • Superglue sets real fast, that's the amazing part!

      @johngraves6878@johngraves68789 ай бұрын

    • @@FLY2KO yeah…! I tried it out with Super Thin CA and holy crap! Less than 5 seconds! And really strong as well! And you don’t need too much baking soda, just enough for the CA glue to mix with and form a goo! It can be levelled off if you’re ready to work it as soon as you add the glue.

      @medic53067@medic530679 ай бұрын

    • A couple of minutes if it has to soak into wood. Otherwise it can sometimes glue the screw into the hole.

      @markkinsler4333@markkinsler43339 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1019 ай бұрын

  • Works like JB Weld, neat

    @johnrobinson5156@johnrobinson51567 ай бұрын

    • Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

      @creationholic101@creationholic1017 ай бұрын

  • TRES INGENIEUX... MERCI DE NOUS FAIRE PARTAGER... QUE DE BONNES IDEES.... 👍👍👍👏👏👏🙏🙏 UN BRICOLEUR MARSEILLAiS

    @ferdinandbasques7715@ferdinandbasques77159 ай бұрын

    • "Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

      @creationholic101@creationholic1019 ай бұрын

  • Ever try "zip kicker" ?? Not sure if they still make it...but it's a super glue accelerator...instant...with alittle smoke ! Amazing stuff !

    @barrybeckford2733@barrybeckford27339 ай бұрын

    • Hello. Welcome to my channel. Thank you for your recommendation ! I will try

      @creationholic101@creationholic1018 ай бұрын

  • Perfektné. Toto sú skutočne super nápady pre improvizované opravy.

    @batatbatat@batatbatat9 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • El último me parece genial 👏🏼👏🏼👏🏼

    @msaracena@msaracena10 ай бұрын

    • Welcome to my channel! Hope you have a good time while watching the video!

      @creationholic101@creationholic10110 ай бұрын

    • Best application could be remaking head of a rusted Skrew..!!

      @poccodroid9464@poccodroid946410 ай бұрын

  • Great informative and educational video

    @johnpaulbacon8320@johnpaulbacon83209 ай бұрын

    • Glad you think so!

      @creationholic101@creationholic1018 ай бұрын

  • Thank you to share this video. Greats ideas.

    @LOUNIS911@LOUNIS9119 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1019 ай бұрын

  • wonderful!

    @aquaoyaji@aquaoyaji9 ай бұрын

    • "Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

      @creationholic101@creationholic1019 ай бұрын

  • I’m liking the introduction to some of the background music bands. 😊

    @Colorado-Tinkering@Colorado-Tinkering7 ай бұрын

    • Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

      @creationholic101@creationholic1017 ай бұрын

  • This is VERY cool!!! That solution for the screws!!!

    @morganmartins3940@morganmartins39406 ай бұрын

    • "Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

      @creationholic101@creationholic1016 ай бұрын

  • Bonjour je suis en France merci pour vos idées 😊

    @mylenemartin2122@mylenemartin21228 ай бұрын

  • Amazing ! Thank you you made my day !

    @netshaman9918@netshaman99189 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • 안녕하세요 한국에서 이 영상을 보고 있습니다 주변에 구하기 쉬운걸로 큰 효과를 볼 슈 있는게 좋았습니다

    @Hakunedayo@Hakunedayo9 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1019 ай бұрын

  • Excelente vídeo

    @luisandrescepedamosquera167@luisandrescepedamosquera16710 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic10110 ай бұрын

  • この動画のおかげでトイレのドアノブ修理出来ました！ありがとうございます！

    @nagatamaneginegi@nagatamaneginegi2 ай бұрын

    • Glad it helped!

      @creationholic101@creationholic1012 ай бұрын

  • thank you

    @JuanRojo-bv7jm@JuanRojo-bv7jm9 ай бұрын

  • Hi, I‘m from Swizerland. The fix of the headlight of my scooter was broken. This permit me to repare it and save me from changing the whole „fairimg“. Thanks a lot.

    @terceladdict@terceladdict6 ай бұрын

    • "Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

      @creationholic101@creationholic1016 ай бұрын

  • I'm from Taiwan I have subscribed

    @williamhuang8155@williamhuang81559 ай бұрын

    • Thanks for subbing! Wish you the best!

      @creationholic101@creationholic1019 ай бұрын

  • Some clever ideas here.

    @Smannellites@Smannellites6 ай бұрын

    • I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

      @creationholic101@creationholic1016 ай бұрын

  • Great idea! It seems very useful. thank you！ from JAPAN🇯🇵

    @user-ry7xx2tc6b@user-ry7xx2tc6b8 ай бұрын

    • This comment is jdm af

      @supers0nic77@supers0nic778 ай бұрын

  • super merci

    @tmsgva8572@tmsgva85728 ай бұрын

  • Merci, exellent

    @thierryaab8156@thierryaab81568 ай бұрын

  • Brilliant!

    @stewieuk1276@stewieuk12769 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • Hola... Excelente, me gusta y espero ver más videos llenos de muchas enseñanzas... Bendiciones. Soy Guillermo Bautista C desde Barranquilla, Colombia... ⚾⚾⚾⚾⚾⚾⚾...

    @albertobautista2656@albertobautista26569 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • Awesome works...

    @sic018statusembryo7@sic018statusembryo79 ай бұрын

    • Hello! thanks for your comment. Wish you all the best!

      @creationholic101@creationholic1019 ай бұрын

  • One word "AWESOME".

    @Marine_0317@Marine_03179 ай бұрын

    • Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

      @creationholic101@creationholic1019 ай бұрын

  • Gracias 🙏molto belo molto importante

    @pedrojimenez8392@pedrojimenez839210 ай бұрын

    • Hello! Welcome to Creation Holic channel! I am glad you like this idea. Wishing you health and happiness always!

      @creationholic101@creationholic10110 ай бұрын

  • Thank you for this.

    @bronx7886@bronx78869 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1019 ай бұрын

  • From holland here

    @Roberto231973@Roberto2319738 ай бұрын

  • I so love repare something. Superb😆 素晴らしいです！

    @halkey@halkey6 ай бұрын

    • "Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

      @creationholic101@creationholic1016 ай бұрын

  • 今後、参考にさせていただきます。・・・素晴らしい！

    @fps3414@fps341410 ай бұрын

    • Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

      @creationholic101@creationholic10110 ай бұрын

  • works better than the instant noodle hack!

    @red-xl6fi@red-xl6fi4 ай бұрын

  • Très bonne trouvaille 👍

    @david72189@david721899 ай бұрын

  • ありがとうございます。身近にあるものでこんな事が出来るんですね。サーフボードとかスノーボードにも応用が利きそう。

    @FULRAIBOU@FULRAIBOU9 ай бұрын

    • Hello and thank you so much for your comment! What you say is very true! If you have any other ideas or solutions, feel free to share them with me! Wish you the best!

      @creationholic101@creationholic1019 ай бұрын

  • so impressive for me I'll try it later

    @metamol_brain_violet@metamol_brain_violet9 ай бұрын

    • I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

      @creationholic101@creationholic1019 ай бұрын

  • Thank for you

    @kapilaadikari7966@kapilaadikari79663 ай бұрын

    • Thank you! Cheers!

      @creationholic101@creationholic1013 ай бұрын

  • The one with the dull screw head is brilliant! I’l remember that one for the rest of my life!

    @inspector_7152@inspector_71528 ай бұрын

    • Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

      @creationholic101@creationholic1018 ай бұрын

  • very useful idea guys

    @jobspeedmms@jobspeedmms10 ай бұрын

    • Glad you think so!

      @creationholic101@creationholic10110 ай бұрын
KZhead