This jet was so fun to build and fly! absolutely loved flying it. cults3d.com/:1899004
Пікірлер
I love those cartoon models.
@stephensowell9578Ай бұрын
This is my favorite one of your designs to date. Fun plane!
@tommcallister5835Ай бұрын
Nice flight, cartoonish looking plane alright. But then again, it flies so well! Cheers 👍💪✌
@rjung_chАй бұрын
Nice, lol I need to sit through the design vid this evening.
@SomeGuyInSandyАй бұрын
Thanks!!
@hotlapkyleАй бұрын
Your creativity is exhausting….keep up the excellence
@larryegilman1Ай бұрын
Exhausting - making you feel extremely tired. Producing or tending to produce fatigue, weariness, or the like. Having a debilitating effect.
@toolbaggersАй бұрын
Thanks!!
@hotlapkyleАй бұрын
@@toolbaggers Yes, exactly.
@dbtest117Ай бұрын
I love the Fattie cartoon planes. Probably one of the most fun to fly. They crack me up too. Especially my Fattie F-14 Tomcat. It looks like it shouldn't be able to fly. 😂 You did great with this one. It would be cool in a 64m. Next, Peppa the flying pig. 😂
@FarmerFpvАй бұрын
Love the Fatty! Love your work! New Sub!! Some I need LW-PLA Foaming filiment, not Pre-Foamed? Purchased the file now I need to get the filament. I have a Bamboo Labs printer.
@JDDupuyАй бұрын
You have the best printer! Go to 3d lab print and get some active foaming LW pla. Have you joined my FB group Kyle’s designs yet?
@hotlapkyleАй бұрын
I have an old mode 2 transmitter and the spring broke on the right so I put foam to "brake" the lever inside and it's very practical for launching at a desired angle
@marielizysurourcqАй бұрын
Great job!!!! Never stop!👍👍👍👍
@rcpowresАй бұрын
When I was in the hobby I would do a bare weight glide test on scratch builds to guestimate the CG. It worked pretty well for me. Granted, those were mainly light wing loading foamies that like to glide so I was able to toss them alone without risking much damage. If you were to try that method on your jet airframes, you would definitely need someone to play catch.
@Andy-df5fjАй бұрын
Yes that works well. I did that with my space shuttle 👍🏻
@hotlapkyleАй бұрын
The Flex Innovations Aura5 lite would be great for this plane. SMC packs are like crack, turbo for airplanes.
@TRSSR67Ай бұрын
Hi brilliant looking plane myself and my mate have built them the c.g info required the dots on the bottom of the wing Do you cg it inverted or upright as i have tried upright and find it very hard to cg very sensitive to get slight nose heavy? Can you please help with some info would like to fly it the way you are in the video on low passes brilliant looking plane buddy
@marko-ej6ndКүн бұрын
You are owning it man
@ianfryer8666Ай бұрын
Nice, I really like the cartoon take on this. For us not using facebook maybe a build video of print settings. I have still not got to print the Viggen.
@dbtest117Ай бұрын
Print settings are individualized to every printer. If you have a Bambu printer I can help with that. If you have a Creality my settings won’t work for you.
@hotlapkyleАй бұрын
@@hotlapkyle Yeah, I'm just assuming the lw-pla will have some general differences to normal pla. I will need to test things out for sure, I'm just assuming a foaming material will have some general differences from normal pla. But you are right and I'm not expecting the exact result.
@dbtest117Ай бұрын
It’s so cute, I just wanna squish the lil’ guy…great job by the way! How did you disproportion the plane yet get it to fly that well?! Good job once again :)
@ALonelyCorsairАй бұрын
It’s a scratch build in thick fatty scale. Believe it or not I didn’t even use an image or this. Just freestyle
@hotlapkyleАй бұрын
@@hotlapkyle truly a thick fatty plane haha…I’m too scared to make one, I’ll stick to my arrows Corsair and soon to be mine Freewing f18!
@ALonelyCorsairАй бұрын
That's great makes sense Bigger intake bonkers thrust 😊
@simons6208Ай бұрын
I wasn’t expecting that much! Brought the galaxy 50mm alive
@hotlapkyleАй бұрын
Woohoohoo! :-)
@sebastiencarton9778Ай бұрын
One of my new favorite content creators just downloaded shapr3d and it so far seems way easier that solid works! What plane is your favorite im gonna buy one of your files just its such a hard choice!
@Aerospace_Engineering_NoobАй бұрын
Thanks! The mini delta fighter seems to be the best all around. If you have to do one do that. The Gripen and the Viggen are absolutely amazing
@hotlapkyleАй бұрын
THIS MAKES ME SO HAPPY 🔥🔥
@3DPrintHangar_RCАй бұрын
Me too!!
@hotlapkyleАй бұрын
yaaaay!!!! x2!!!!
@treerecords1551Ай бұрын
@BUILTFAST Awesome work I'm very impressed. What 3d printer do you use and how much does it cost. Or can I do this with any 3d printer big enough??
@MrMagoo321Ай бұрын
Any printer with a build volume of 220/220/220 would work fine. I highly recommended Bambu lab P1P or P1s
@hotlapkyleАй бұрын
@@hotlapkyle Thanks!!
@MrMagoo321Ай бұрын
Have you considered instead of hand launching using a launch ramp with a bungee cord? There's a guy that flies at the local RC field in Alvin that put a plywood pistol grip midway on/under a (I'm guessing here as I haven't asked just observed) 1/3 segment of pvc about 2 foot long. He cocks the launcher, sets the plane in and fires it up at an angle and he gets perfect launches every time
@bobjoatmon1993Ай бұрын
I have definitely thought about it. My philosophy is to make planes that all people can fly without any special equipment. I won’t make any designs that take too long to print/build or need landing gear
@hotlapkyleАй бұрын
I have the electronics leftover from a 70mm EDF and i think i might attempt to scale this up. any advice?
@BirdsqueezerАй бұрын
Should scale with no issue. My advice is to scale it up and only print that edf holder section of the fuselage to make sure it fits the fan. Then print the rest
@hotlapkyleАй бұрын
Should be 140% ?
@hotlapkyleАй бұрын
awesome, just started to print my first one, could you add cg position? great job
@zazsigircvtolАй бұрын
No cg bumps under the wings??
@hotlapkyleАй бұрын
There should be cg bumps. If not the CG is the front corner of the servo pockets
@hotlapkyleАй бұрын
Great stuff! Do you have any files for 190mm build plates?
@dennismatovich8411Ай бұрын
So the wonderful thing about my designs is you can absolutely print on any bed size! If you learn how to slice parts. Just print the two halves and CA glue them together. All my jets/ planes use slicer generated infill so you can slice any part to fit your bed and do it
@hotlapkyleАй бұрын
Hi, thany you so much for this great constuction. I downloaded it and I'm printing now. Please can you tell something about CG - would be nice - thx !!!
@JetsunlimitedАй бұрын
The CG is the bumps under the wings
@hotlapkyleАй бұрын
Ok, thanks 🙏!!!
@JetsunlimitedАй бұрын
btw, I built a Starfighter in this size with depron! kzhead.info/sun/e8ufZJigqpRqraM/bejne.html
@JetsunlimitedАй бұрын
How about an F 104 with an optimized wing
@larryegilman1Ай бұрын
I have the 104 on my list
@hotlapkyleАй бұрын
Can you give a quick read out of your printer settings and filament. Like print speed, nozzle, heat, and brand of filament? I would appreciate it, thanks!
@SomeGuyInSandyАй бұрын
Are you on my FB group? We have tons of people that can help
@hotlapkyleАй бұрын
@@hotlapkyle I'll check it out. Thanks.
@SomeGuyInSandyАй бұрын
Do you have 70mm jet?
@christophertubig8267Ай бұрын
Yes I made the mirage 64/70mm. I find the 64 is a lighter weight option as the flight times are much longer on a 2200 and they land much lighter
@hotlapkyleАй бұрын
What about a Phatty A-7?
@BellyUpFishАй бұрын
Cool idea
@hotlapkyleАй бұрын
Sorry fatty fuselage make look cool but it create huge amount of parasitic drag as well as may cause aerodynamic instability. I would rather design a low drag air frame for EDF jet applications. My two cents
@angelofmusic477Ай бұрын
All for looks and giggles my friend. Still pretty fast too lol
I love those cartoon models.
This is my favorite one of your designs to date. Fun plane!
Nice flight, cartoonish looking plane alright. But then again, it flies so well! Cheers 👍💪✌
Nice, lol I need to sit through the design vid this evening.
Thanks!!
Your creativity is exhausting….keep up the excellence
Exhausting - making you feel extremely tired. Producing or tending to produce fatigue, weariness, or the like. Having a debilitating effect.
Thanks!!
@@toolbaggers Yes, exactly.
I love the Fattie cartoon planes. Probably one of the most fun to fly. They crack me up too. Especially my Fattie F-14 Tomcat. It looks like it shouldn't be able to fly. 😂 You did great with this one. It would be cool in a 64m. Next, Peppa the flying pig. 😂
Love the Fatty! Love your work! New Sub!! Some I need LW-PLA Foaming filiment, not Pre-Foamed? Purchased the file now I need to get the filament. I have a Bamboo Labs printer.
You have the best printer! Go to 3d lab print and get some active foaming LW pla. Have you joined my FB group Kyle’s designs yet?
I have an old mode 2 transmitter and the spring broke on the right so I put foam to "brake" the lever inside and it's very practical for launching at a desired angle
Great job!!!! Never stop!👍👍👍👍
When I was in the hobby I would do a bare weight glide test on scratch builds to guestimate the CG. It worked pretty well for me. Granted, those were mainly light wing loading foamies that like to glide so I was able to toss them alone without risking much damage. If you were to try that method on your jet airframes, you would definitely need someone to play catch.
Yes that works well. I did that with my space shuttle 👍🏻
The Flex Innovations Aura5 lite would be great for this plane. SMC packs are like crack, turbo for airplanes.
Hi brilliant looking plane myself and my mate have built them the c.g info required the dots on the bottom of the wing Do you cg it inverted or upright as i have tried upright and find it very hard to cg very sensitive to get slight nose heavy? Can you please help with some info would like to fly it the way you are in the video on low passes brilliant looking plane buddy
You are owning it man
Nice, I really like the cartoon take on this. For us not using facebook maybe a build video of print settings. I have still not got to print the Viggen.
Print settings are individualized to every printer. If you have a Bambu printer I can help with that. If you have a Creality my settings won’t work for you.
@@hotlapkyle Yeah, I'm just assuming the lw-pla will have some general differences to normal pla. I will need to test things out for sure, I'm just assuming a foaming material will have some general differences from normal pla. But you are right and I'm not expecting the exact result.
It’s so cute, I just wanna squish the lil’ guy…great job by the way! How did you disproportion the plane yet get it to fly that well?! Good job once again :)
It’s a scratch build in thick fatty scale. Believe it or not I didn’t even use an image or this. Just freestyle
@@hotlapkyle truly a thick fatty plane haha…I’m too scared to make one, I’ll stick to my arrows Corsair and soon to be mine Freewing f18!
That's great makes sense Bigger intake bonkers thrust 😊
I wasn’t expecting that much! Brought the galaxy 50mm alive
Woohoohoo! :-)
One of my new favorite content creators just downloaded shapr3d and it so far seems way easier that solid works! What plane is your favorite im gonna buy one of your files just its such a hard choice!
Thanks! The mini delta fighter seems to be the best all around. If you have to do one do that. The Gripen and the Viggen are absolutely amazing
THIS MAKES ME SO HAPPY 🔥🔥
Me too!!
yaaaay!!!! x2!!!!
@BUILTFAST Awesome work I'm very impressed. What 3d printer do you use and how much does it cost. Or can I do this with any 3d printer big enough??
Any printer with a build volume of 220/220/220 would work fine. I highly recommended Bambu lab P1P or P1s
@@hotlapkyle Thanks!!
Have you considered instead of hand launching using a launch ramp with a bungee cord? There's a guy that flies at the local RC field in Alvin that put a plywood pistol grip midway on/under a (I'm guessing here as I haven't asked just observed) 1/3 segment of pvc about 2 foot long. He cocks the launcher, sets the plane in and fires it up at an angle and he gets perfect launches every time
I have definitely thought about it. My philosophy is to make planes that all people can fly without any special equipment. I won’t make any designs that take too long to print/build or need landing gear
I have the electronics leftover from a 70mm EDF and i think i might attempt to scale this up. any advice?
Should scale with no issue. My advice is to scale it up and only print that edf holder section of the fuselage to make sure it fits the fan. Then print the rest
Should be 140% ?
awesome, just started to print my first one, could you add cg position? great job
No cg bumps under the wings??
There should be cg bumps. If not the CG is the front corner of the servo pockets
Great stuff! Do you have any files for 190mm build plates?
So the wonderful thing about my designs is you can absolutely print on any bed size! If you learn how to slice parts. Just print the two halves and CA glue them together. All my jets/ planes use slicer generated infill so you can slice any part to fit your bed and do it
Hi, thany you so much for this great constuction. I downloaded it and I'm printing now. Please can you tell something about CG - would be nice - thx !!!
The CG is the bumps under the wings
Ok, thanks 🙏!!!
btw, I built a Starfighter in this size with depron! kzhead.info/sun/e8ufZJigqpRqraM/bejne.html
How about an F 104 with an optimized wing
I have the 104 on my list
Can you give a quick read out of your printer settings and filament. Like print speed, nozzle, heat, and brand of filament? I would appreciate it, thanks!
Are you on my FB group? We have tons of people that can help
@@hotlapkyle I'll check it out. Thanks.
Do you have 70mm jet?
Yes I made the mirage 64/70mm. I find the 64 is a lighter weight option as the flight times are much longer on a 2200 and they land much lighter
What about a Phatty A-7?
Cool idea
Sorry fatty fuselage make look cool but it create huge amount of parasitic drag as well as may cause aerodynamic instability. I would rather design a low drag air frame for EDF jet applications. My two cents
All for looks and giggles my friend. Still pretty fast too lol
Fatty Mirage was my ex-girlfriend's name
Lol
L133