BMW E46 Quicker CCV Replacement DIY - Part 1
2018 ж. 30 Қаң.
307 586 Рет қаралды
CCV Component Kit (with cold weather hoses): amzn.to/2E6fr65
Hose Separator Pliers: amzn.to/2GBiTUi
Dipstick Tube O-Ring: 11431740045
My mailing address for correspondence or swag of any kind is on my about page.
This video is for entertainment purposes only. 50sKid assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.
6 years later and your video is still helping people. Used it today whilst doing my 330ci clubsport. Cheers pal 👍🏻
Thanks '50's Kid'. Last weekend I replaced my Vanos seals and valve cover gasket, using your video as a guide. This weekend I have replaced my CCV system. I couldn't have done it without your help. You have saved me hundreds of pounds in labour and my car is running like never before... it's literally flying! I am now addicted and wondering what to do next... ??? :)
Your camera angles and lighting are great; I do not know how you do it but keep it up.
I cant skip around in these videos because there is so much good information. Thank you
Fantastic video!! Thank you for all you do for the BMW community, it's huge!!!
I can't thank you enough for your videos... it's like I'm right there with you doing the work and handing you tools.
Your videos are awesome , and incredibly helpful. There are no other e46 videos needed
Your instructional videos are spot on. You do an incredible job with them. You never skip over anything and explain all issues. I really appreciate your effort. You do a great job. Keep up the good work!
Thanks for the CCV twist trick, I did my 99 323i last weekend and it wasn't as bad as I thought it would be thanks to the twist trick, your the best!
all in all 6 hours to disassemble and reassemble this project. I am 6'4 so working on the car and leaning over was a pain. But your video helped immensely. Car runs better than it has in years and the gas millage has gone back up. 2004 e60 530 218,000 miles. Thank you.
Your timing is great. My kit just arrived in the post today.
Nice, there's always somebody who was just about to do whatever I just posted lol
High quality work, as always! Thank you Jason!
50s kid is awesome. About to attempt this on an 04 x3 e83
My 2004 330xi turned into a smoke machine due to a failed CCV. Im not used to working on BMWs so I couldn’t have changed it myself without your videos. Thank you!
I've watched a multitude of videos regarding our E46's. This, by FAR, is the absolute best!!! Your camera angles (mini cam??), your lighting, your full & thorough explanations, everything, just GREAT!!! PLEASE keep it up. Truly the best out there !!! THANK YOU. You have saved me tremendous stress AND many dollars. These vacuum components are an enigma & w/out your descriptions & explanations I would have ended up replacing items that didn't need to be. Repaired my (much needed-to-be) DISA but symptoms continued & it was recommended to also replace Idle Control Valve (provides same symptoms but $100+) but your explanation of it's working and cleaning definitely helps. Besides, I just have this feeling that it's the CCV. I have not yet under taken this job because I wasn't looking forward to taking the intake off (recommended by everyone else incl BMW manual, and/or the additional expense (gaskets etc..., just hoping I don't have a vacuum leak there)). I knew there had to be a better way. I will let you know how I make out but again, THANK YOU !!! Seriously, so happy to find at least one (other) logical & competent mechanic out there... :)
Finished it today based on your Instruction,worked fine,took me 4 hours with lots of Smoking Breaks and Cleaning throttle body and icv,and some more things.used new seals,now its running fine.thx jason.
Did you purchase the rubber o rings that amazon reccomends to purchase with the kit?
@@jrease4829 no,i bought a whole kit, but it is in Germany, from ebay,seller is vanosschmiede
Them smoke breaks be clutch
Just did this replacement this week. My only problem was not pushing the TB electrical connector on far enough, so I started the engine when finished and threw a couple of codes. Torque app got me dialed in. Had to pull the DISA back out, & the 2 rubber intake ducts to find the problem. Pushed the plug on fully, put it back together and all was (and is) well. One thing of note regarding that damn flexible tube that's so hard to twist onto the CCV: you can push it straight on, you don't have to twist it on. The hardest part of this was having the ability to grasp the CCV and hose enough to push hard enough to get it on. These two videos were awesome and ridiculously helpful for this procedure. Thanks so much, Jason!
Thank you Jason for this video, I have watched this video about 50 times and my parts arrived yesterday. I made sure to lube all the connections up and do a dry fit before I try to install. I found that the lower oil hose would not push in all the way because the o-ring was super big. I saved the connector from the old one and it snapped in to place just fine. It was such a simple job, I thought the 90 degree through the small hole was the easiest knowing the "twist secret" I was able to even pull off the old one with out even breaking breaking it. I opened up the old CCV and clearly found the failed diaphragm inside. I am just to go for my drive cycle and all my short term fuel trims are now at +/- Zero. Long terms are dropping too. At idle the trims are perfect then at 2500 rpm they go up to about 10% instead of the old 28% then when I let off the gas and go back to Idle I can see the STFT recover to the LTFT then go back to Zero. I am pretty sure everything is ready to go. Thanks for your help and can't wait to see how everything checks out once the drive cycle is complete. Cheers!
TIP: when reinstalling make sure the fuel line goes before or under the 3/8” hose that comes from the secondary air pump that connects to the back of the manifold. If not, The fuel line will bend the 3/8 inch hose against the nipple it connects to and restrict the air flow. you will get the “engine check light” but no error codes. I ran into this issue. Hope this helps someone.
Hey, just to say I followed the DIY, I am an absolute amateur and did the job in 5 hours, thanks for the video! I used a lot of silicone lubricant on all the o rings and stuff, would have been truly awful trying to fit dry. My car doesn't seem to be burning oil like it used to, did a 400 mile journey no problem!
50skid with them great angles really appreciate it man this car is so small compare to real life awesome
Simple comment, owning a e46 is 1000percent easyer due to your fantastic videos , your a total star just reaplaced my ccv and would never attempted without removing inlet without your detailed videos , Thanks
Outstanding video. I'm due for my 2nd CCV replacement and your DIY makes me confident.
god your second? i hope it went well
I just got the ccv off thanks to this video, I'm looking at the new one and gathering energy to get it in. Thank for your your videos
I really really love the way you explain things, you are a genuine curious mind that enjoy teaching what you have learned, and your videos are really helpful too
Stopping by to say thank you... done in 2 hrs thanks to you..
Bro Ive fixed my 2005 325I so many times thanks to you . THank you so very much . Because of you my baby stays on the road
I just want to thank you so much for these videos! Really helped out!
Jason, thank you so much for this video! I worked on a car for the first time ever following your instructions in this video. Just put her back together and she runs wonderfully! Hope a leak doesn't get exposed in the coming days. Thanks again!
I plan on changing my CCV this weekend. What tools did you use? Thanks
Came on here to say thanks. It took forever but I think I successfully took apart, replaced and reassembled all the above...hopefully. I had some trouble starting it up after I put it all together again, and when I did, I had smoke still coming out of the exhaust(which was to be expected) but a few minutes running and it cleared up. Terrible misfire at first though. Took longer than I expected to burn all the oil though.Your videos are concise and clear. While taking it apart, I also noticed that the starter is underneath the intake manifold so that should be fun to change if/when it goes out. I now know why most mechanics aren't thrilled about working on BMWs. I still think it would have been easier to tow it to a cliff and send it on it's merry way but anyway, I appreciate your videos. You should put a link to your video on here that shows how you counteract the CCV failure.
Hey Elizabeth great feedback I plan on changing my CCV this weekend. What tools did you use? Thanks
Hey Jason: Great video as always. I will eventually do this job (CCV replacement) in my e46 following your detailed videos during this upcoming summer. I live in Vermont and what I have found is that when I start seeing the Mayo substance -- due to the condensation by the constant change in temperature due to the motor warming up from very cold temps (10 to 20 degrees Fahrenheit) -- , is good at the end of the day (after arriving at my house from work) to leave the oil cap open for 15 to 20 minutes to let the water vapor and condensation go away. My CCV is still in good shape but letting the vapor out helps with the Mayo (water mixed with oil) situation. Thanks again for the great quality videos; they are the best!
Thanks for drooping that info off on the mayo''s lifecycle
Amazing Step-by-Step!!! This vid is some of the best i have ever seen. Quite Detailed, thorough, and super informative. 50's kid should be working for Chilton, Hanes, or Bentley. 2 Thumbs Up👍👍
Thanks for posting this DIY. Really appreciate it, sir. Going to be working on my M54 Z3 CCV and oil filter housing gasket.
Thank you, you daved my life keep it up please. Took it too a mechanic,he said its my stem valve gaskets he wwnted 2000$ but i had a feeling it was the ccv, so i changedkt my self and it worked!
Good job with the video 50sKid. It helped me with the replacement of my e39 530i CCV
Best quality camera and details ever. You are a hero of Bimmers. Thanks so much..
man I don't know if it's just me but your vids are getting better and better, you've helped me so much I need to start sending you checks.
Nah they're totally getting better and I am the best and KZhead just needs to blow my channel up bigger than ChrisFix lol
Yo, dude! Just wanted to say thanks for the trick to getting this off. I used this video to figure out how to get off my original CCV so I can retrofit an oil catch can. Cheers!
Excellent video. I replaced the CCV system on my 330i e46 a couple of weeks ago. I did so WITHOUT removing the heat shield and WITHOUT removing the oil dipstick tube. I had heard horror stories about reinstalling the dipstick tube, so I avoided that step. I suggest playing with the various parts of the CCV system so that you can really understand how they connect to each other. Be able to connect them ‘by feel’ because you will be connecting these in the blind. Especially the upper hose that connects to the top of the valve. Be mindful to reconnect all of the electrical connectors. I know that sounds obvious, but I forgot to connect one. End up with a CEL until I reconnected it. Replacing the CCV system really isn’t that terrible of a DIY repair.
This is a great guide for general car work. Nice.
yes, but sometimes the dipstick needs to be removed in order to remove all the gunk
Thank you I did this on my bmw and now it runs great no more engine light
You're a good man, thanks for posting this.
Thank you so much for the video. Saved me a lot of money this last weekend. I really appreciate it.
After changing my valve cover gasket (using 50skid’s video), I noticed the ccv hose that ran from the valve cover to the ccv system under the inlet had snapped in 2. Must have done it with age/as I was moving the hoses around as engine was running fine, no lean codes. From where the break was it was accessible from the top. I ended up getting a 15mm straight coupler to rejoin it, saved a bit of faff for once :)
Nice video. This is how I chose to do mine and it beats taking off the intake manifold any day. Just need to feel for the connectors because you can’t see them directly
Really helpful video keep up the awesome work. And now a silly question, if I lubricate the o rings with silicon spray instead of the silicon grease that you have will be the same thing ? Thanks
Great videos, man! I did this in about 3 1/2 hours. I have been working on cars for a long time so I can't say it was particularly difficult. But it was tedious and I hope I don't have to do it again! Pro tip: Having the car up on ramps or jack stands when doing this helps a lot. It puts everything you need to work on at a better angle and raises it up a foot or so.
Keeping it honest with you bro the second you said that you were going to show me all of the angles of you unplugging the hoses I knew I had to subscribe
First job on my e39 made easy thanks to this!
Awesome video, but I have a question - Would it be easier to just remove the intake manifold to do this? I plan on replacing everything under the intake (starter, OFHG, CCV system, VANOS oil line, VANOS rebuild, etc) while I'm in there. Also, if I remove the intake manifold, would I be able to keep the throttle body attached to the intake? I didn't buy a new TB gasket but I'm planning to start this project tomorrow. Hope to hear from you soon, thanks :)
Thanks for making this. Appreciate you sharing the know how. Between you, Pelican Parts and Shop Life I've saved a decent amount on paying for someone else to do work.
Right! These three have saved me so much money!
And the long way consists of taking more of the engine apart??
EXCELLENT video. I just did procedure for my second car and ran into an unexpected curve ball. - The OEM CCV that I was replacing (on an X3) had a tough foam rubber "jacket" that wrapped completely the CCV assembly. It made the CCV look huge and impossible to remove. The jacket completely hid the two mounting screws. I grabbed a utility knife and ripped the exposed part of the jacket until I could access and remove the screws. From that point I intentionally, but easily cracked apart the CCV (and hoses) in order to get it out. Man was I #@^%$^'ing as I hacked away at the jacket! 50's kid: Thanks for video!
Another great video. I did it with the manifold off last time but I am going to try this today
Such a boss bro we all love you
Excellent video, all tips, amazing! Thanks a lot!
Very helpful. Thank you for posting.
Great video! I read in the comments that's it's possible to do it without removing the dipstick tube? I'm wondering because, my e83 m54b30's dipstick tube is bolted way further down compared to the e46, and it's really hard to get some leverage in that tiny space, only thing that fits is a 13mm stubby wrench, but no leverage, I'll try with a flexhead tomorrow.
Hello 50's Kid. Love your videos everyone is in great detail. I have watched your video on taking the intake off to change the CCV, i have done that but at the end of your video you said it would take alittle bit for the fuel pump to catch? Mine is turning over like it wants to start but never catches.. is there something i missed?
Cred to you for making these kind of videos
Awesome videos man! Anytime I always check your channel first to see if you've done a diy. Just did this ccv replacement yesterday and the only thing I would add to your diy is to remove the purge solenoid bracket too. I struggled for awhile to get that top hose on until I removed that bracket. Went right in on my first try. Keep up the good work man!
That's interesting. I've never needed to remove that bracket--why do you think it helped you?
With the bracket on it was kind of a weird angle to get the upper hose to line up with the ccv. With the bracket out of the way I could easily fit my left arm right up against the intake manifold and line up the hose with the ccv without any weird angles. It also gave me more room to install the breather hose as well. I'd say the best thing about this install was cleaning the ICV. Mine was so clogged that it's surprising it even worked. Before cleaning it my car would bog down every time I let off the throttle while in gear and made shifting rather uncomfortable. Now I can easily shift without the car bogging down when I let off the throttle. This and the DISA overhaul have made my engine run so smooth that I'm blown away. Next job is the vanos and VC/VCG. Thanks again for all your videos. I've done a ton of work on my car using your videos and you've saved me thousands!
Haha, this fits me great, also got my ccv parts today, now i dont need to take the manifold of like in your other video of ccv replace. I live in Norway, and i cant see the "cold climate" hoses on my car, and its not even imported.. I do think it may leak some oil or something, aswell im going to change the valve cover gasket. ive seen some condense in the oil at winter, because of really short rides everyday.. so oil changed, now for the ccv and valve cover gasket. hope it works, i will use this video for sure 50's :)! Im no mechanic, just a 23 year old "Handy mann" haha, but all i've done to my e46 are all credits to you ! haha Changed all my abs sensors last week, but i still have the 3 lights in the dash.. middle @ and abs/handbrake.. so might be something else.. Im going to try to disconect and reconnect the "cable" saw something like that one youtube, or i will need a diagnose on it.. and yeah, last week i used one of u videos to change the waterpump, Car runs still, so thanks ! :D
Le has salvado la vida a mi e46 con este vídeo mil gracias
Excellent presentation
Merci pour cette excellente vidéo 👍
great video. I have a question: I need to change the one on my 2006 118i E87 with the N46B engine. What video can i follow or what guide? thanks in advance
Excellent DIY video! I just did this today and would like to share a few notes... First: Silicone spray. It works better than the thick grease, makes things slide right on and less messy than the thick grease. Hit all the plastic/rubber hose connections. Second: Get some DeOxit spay and hit ALL the pin connections, male and female. Your car will thank you and it also makes sliding the connectors together easier. Third: Watch the booster hose at the Sucking Pump end. Be careful! Mine broke broke off at that weak connection. I'mm trying an epoxy fix for now but I'll replace it with the updated BMW part. The hardest part of the whole process was the first hose on the vid, the one that "turns" up underneath the intake runner. I swear that one took me an hour and 8 or so tries. But I got it. After that it was smooth sailing. This is a fiddly job but not that difficult and made much easier if you watch the video. Thanks 50sKid!
I plan on changing my CCV this weekend. What tools did you use? Thanks
Another fantastic video! Thanks! Looking forward for part 2...
very helpful video -as always- thanks!
Will it hurt running your car like that for a few weeks until you can get it replaced ?? Mine just pops every now and again
Great video. I changed the ccv last weekend, however, I am not sure if I have done it correctly. When I remove the oil cap while the engine is on, I hear noise coming from where the CCV is at (I also feel a vacuum from oil cap opening). Is this normal?
Just a helpful tip if you have an M52tu you will have a vacuum tube connected to the separator itself that you will need to remove.
Hey 50'skid !1 I’ve been enjoying your auto videos on KZhead - good job !! My problem is that after installing crank case ventilation valve, I noticed to my horror Sputtering Noise when I turn on the ignition. Do you have any advice on how to fix this?? Let me know thanks Regards Philip
Hey love the videos huge help! I'm going to do the oil seperator kit replacement but what I'm noticing on my motor is the oil seperator hose coming off the valve cover stays on top... and connects instead of returning below... I do have the metal valve cover conversion.. picture available. Your thoughts? I'm sure I'll figure it out once I get into it however..
Thank yo so much for this 2 part series. I did the entire procedure on my E39 / M54 today in about 5 hours including cleaning everything out. I took my time, did everything very carefully and all went well. One remark: before assembling the 90 degree angle tube with the bayonet style connector to the CCV I made marks on the CCV and the tube connector with a white marker. This way it's a lot easier to find the correct position and snap those two parts together. I was struggling to get it right and after I marked the parts is was a breeze. The E39 also has two connectors on the left front of the engine and some handouts include disconnecting them. Don't bother, there is enough room between the cable box and the manifold if you leave them in place. And for all with an M54 engine DO NOT forget to transplant the small plug from your old CCV to the new one. On the M52 a vacuum hose goes there, but not on the M54. Forgetting this will require you to disassemble the lot again. Many thanks, could not have done this without your videos! Liked and subscribed! Keep up the good work!
I plan on changing my CCV this weekend. What tools did you use? Thanks
hello sir i have a 2002 BMW 525I i was replacing the purge valve the hose came out of the other end how can i reconnect the hose back without removing every thing .is there a way i can connect it just by removing fewer parts i am not a mechanic. you videos are very helpful thank you very much.
Major thanks for doing this vid so really well. Just done mine. But didn't need doing :( 120k all clear inside..
Eres un genio amigo mío gracias! Seguí tus pasos, gracias
Thank you. Mr. #1. Awesome.!!!!!!
Hello brother Thank you very much you are preparing a nice video and thanks to you ı go through all my work with your videos. Grettings from turkey 👋🏻🥰
Great video! Taking off the intake manifold looked like too much work so thanks for doing a "quicker" CCV video!
Jason, how long would you estimate this way takes, in real time? I have gone as far as removing the throttle body and ICV for cleaning, and it looks as though that's most of the way there... just hoping 2.5 days off work will be enough! (My valve cover hose barbs are clogged as well, so I am holding off doing my valve cover gasket until I do the CCV - I don't want more cheese building up in the meantime!)
have a 2005 bmw 325i bringing back from the dead, watched lots of your videos and love them. issue i have, replaced almost every component in this car, getting p2440 /.new pump and new after market valve(the valve has no vacuum connection this model) just replace the entire pcv system removed manifold tight connection to the intake from purge valve. still getting code. i am about to install in 5 minutes a new piersburg valve to see if that does trick/pump blows lots of air. any suggestions if that doesnt work? need help
Hey man! I am concerned on a step that you called the connector vacuum hose. It connects with the vacuum hose that goes up, coming from the CVV. However in my BMW e46, 328i, it does not have the other connection on the back of the manifold to fully secure it. Why is this? Other than that. I am just learning how to take care of my BMW, and it’s been a journey watching your videos. It is truly educational! Thank you.
Good shit man. Love your videos very educational and money saving.
I know this video is years old now, and i m9st likely will NOT get a response. But i am curious, can i use the " Cold Weather Kit " when replacing my existing hoses ? I live in NJ and we actually have 4 seasons. So even if my 325xi does not currently have the Cold Weather Hoses, i would like to switch to it. Just do not know if it is swappable or not. Any help would be appreciated greatly.
Thanks for this great vid
Hi everyone. Thanks Jason for the great videos. I attacked my 05 330ci's CCV system this weekend due to the P-0017 and P-0019 codes and failing NJ emissions. Well...4 days, a stripped TORX and multiple problems along with my limited skillset and tools. I got the OLD CCV off last night and while trying to put the new one on I spotted a stripped wire coming off the "electronics box" to the left of the DISA/intake, etc. I'm going to take a look at it tonight before I give up and bring it to the German Car Shop and see if it's worth fixing or just junking. It's a nice car. 182 K always garaged and a 6 speed convertible. I'd hate to junk a beautiful car but the economics are coming into play. Is it work sinking in a thousand $ on a, in reality, a $2k car? What I'd like to know, is that "electronics box" just for emissions electronics or is it the whole cars electronics?? Any and all suggestions are appreciated...
Excellent video!
Thank you very much, from france
i have a 2003 bmw e39 m54 engine what size hoses should i buy to replace everything
hi mate just wondering do u do ccv vid 4 318i n42 motor
Great vid 'Kid! Thanks for all you do. I'm about to do the CCV on our E46 and one question I have is: is all this done from the top of the engine or does the car need to be lifted to get underneath? Thanks!
Thanks for the videos. I have done this before on an E46 and an E39, but nice to watch a refresher. I would love to send you a picture of a plastic piece I found just setting on the block when I got the manifold off. I am usually very good at recognizing where things come from, but I cannot figure out what this piece goes to.
Sure
@@50sKid please send an email to scottrshaw.ss@gmail.com and I'll attach the pictures. Thanks!
Did that on my 325ti last january and struggled for almost two hours while reinstalling the last tube you pulled out of there. One short tip: Mount the oil seperator first, remove the bolts from the power steering reservoir and carefully push it aside. This gives you access to the twist-style connector of the tube snaking through the intake manifold. The easiest way to mount this tube is to bend it in shape beforehand, fish it through the manifold from the front of the engine, push it onto the connector and then turn it clockwise so the other end will appear on the top of the manifold.
Removing the power steering reservoir is one way to go but you can also just pull the evap purge solenoid right off it's bracket and you have a nice little space to get your hand in there, which is what I showed in this video. Both valid ways. I agree with everything else you said though!
I have a 2001 bmw x5 3.0 my sway bar stabilizer bracket is missing a bolt? Would a 2004 bmw x5 use the same bolt? Or do you know where I can buy one? Its the one on th front. Thanks
Hi I have a question about the ccv replacement on the m54, I already have to do the oil filter housing gasket and wanted to know if I should be able to access all the ccv parts from the Front side while I have the oil filter housing off to the side I appreciate the help if you can get back to me
would it be easier to do ccv if i am already doing the oil filter housing gasket..would i have better access with the oil filter housing gasket assembly already out?
How often do you need to replace the ccv? and what are the symptoms? love my m54, its done 155kms
O8-17-2021, En la Madre, that's a lot of work
PCV on my 9000 Aero takes 5 minutes to replace the entire system--on my 951 and 330Ci its forcing hose jungle, unseen bolts, crouching crank vent/hidden click connector. Wunderbar.
My 9000 Aero has a little ball valve that takes two seconds to change and it makes like 350 horsepower. All my German cars always have a PCV system with like 10+ components.