KZhead
Ойын-сауық

Atlasminx World Record (former)

corenpuzzle
2021 ж. 15 Там.
13 578 823 Рет қаралды
Жүктеу

This is the atlasminx. The puzzle has an edge length of 140mm, weighs 7.9kg and has 4863 pieces.
The design of the puzzle was inspired by Matt’s yottaminx and Oskar’s 17x17. The biggest change I made to the floating anchor mechanism was to change the direction of the “hooks” each part has. That allowed for the parts to be printed in an orientation that minimized the need for support material in FDM printing. I also added a kind of foot to 25% of the center pieces that prevents them from twisting in place and also helps with sorting. I made the puzzle sitckerless as I did not want to place over 5000 stickers. Also it helped mark progress during the build Instead of just printing in black and only black for months.
I would say the turning quality is better than the 22x22 but a little worse than the yottaminx. The turning is a bit catchy and alignment is an issue. The puzzle is stable though, so far I've not had a signal pop.
Overall this project took a little under 100 hours from start to finish witch was a lot faster than I was planning. Given the relatively short amount of time this took I plan on at least partially printing out a version 2 of this puzzle in the future. I think with only a few small changes the turning could be improved to the point were solving it in a reasonable amount of time would be possible
Filament I use for 3d printed projects: us.polymaker.com?aff=41
Also check out Daniel Forgosh's video on this puzzle: • Atlasminx (Former Worl...
Atlantis by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Artist: audionautix.com/

Пікірлер

  • That is incredible. And honestly such smooth turning for a printed puzzle of that magnitude.

    @Tingman@Tingman2 жыл бұрын

    • hey tingman

      @hongkonger885@hongkonger8852 жыл бұрын

    • Tingman brought me here!

      @ChrisSChoi@ChrisSChoi2 жыл бұрын

    • Hi tingman big fan of you and your daughter you girl solve cube in under 15 4 5 seconds you guys are insane I will solve a cube in 2 minutes and you guys you guys are good at cubing

      @prateek00018@prateek000182 жыл бұрын

    • Ayyyyy tingman

      @S_honeybee@S_honeybee2 жыл бұрын

    • Tingman 😳

      @MikkoLaulainen@MikkoLaulainen2 жыл бұрын

  • That’s HUGE!!!!!!

    @SoupTimmy@SoupTimmy2 жыл бұрын

    • cat

      @cuberdoge22@cuberdoge222 жыл бұрын

    • That’s what she said

      @oursukhoi9513@oursukhoi95132 жыл бұрын

    • @@oursukhoi9513 who’s she and why are they saying everything 🔫

      @thegoldengood4725@thegoldengood47252 жыл бұрын

    • @@thegoldengood4725 your to young to understand

      @oursukhoi9513@oursukhoi95132 жыл бұрын

    • He's a huge tik tok cuber with over 1 million followers. He mainly focuses on cube art.

      @CewbPianist@CewbPianist2 жыл бұрын

  • i give you a tip. NEVER scramble this monster

    @Zipfelkatze@Zipfelkatze Жыл бұрын

  • Fun fact: Technically this minx's official name would be Quettaminx now because the SI unit updated their prefixes

    @hongkonger885@hongkonger88510 ай бұрын

    • i can't find a real 17x17 minx (ronnaminx) yet, does it exist?

      @GetRidOfHandles@GetRidOfHandles7 ай бұрын

    • @@GetRidOfHandles i dont think so

      @luistoledo-yc5po@luistoledo-yc5po2 ай бұрын

    • What we would call a 21x21 would be the atlasminx

      @camuchoc5913@camuchoc5913Ай бұрын

  • All I can say is wow! Congrats!

    @redkb@redkb2 жыл бұрын

    • Fun fact: everything is either a potato or not a potato

      @Plasmicballs@Plasmicballs2 жыл бұрын

    • @@Plasmicballs ok

      @polofnbryt4khdfbmcpebutido968@polofnbryt4khdfbmcpebutido9682 жыл бұрын

    • Yeah

      @ayotrick4394@ayotrick43942 жыл бұрын

    • You’re alive??

      @yunggoth9713@yunggoth97132 жыл бұрын

    • @@Plasmicballs Fun fact: if you stacked Elephants on top of eachother they would not like it

      @KianCabardo@KianCabardo2 жыл бұрын

  • That is insane! Congratulations!

    @Cubeorithms@Cubeorithms2 жыл бұрын

    • Hey

      @z2cuber@z2cuber2 жыл бұрын

    • Pls reply me

      @z2cuber@z2cuber2 жыл бұрын

    • I'm ur big fan

      @z2cuber@z2cuber2 жыл бұрын

    • Woo hoo!

      @KeneGitu@KeneGitu2 жыл бұрын

    • I love you blue your my fav KZheadr

      @Karijoy80@Karijoy802 жыл бұрын

  • Me after scrambling this: "Hey boss! Can I have 2 days off? I have a big problem at home that I need to take care of'

    @jayanikachandrapriya7811@jayanikachandrapriya78119 ай бұрын

    • Me actr scrabing this: Mo it ý

      @baconheadhair6938@baconheadhair693821 күн бұрын

  • I can't believe how big of a puzzle it is and it has smooth turning for just a project😮

    @Mr.rubixcube745@Mr.rubixcube74527 күн бұрын

  • Magnificent.

    @TonyFisherPuzzles@TonyFisherPuzzles2 жыл бұрын

    • Glorious

      @isaiaht8648@isaiaht86482 жыл бұрын

    • Better than 100% of megaminx.

      @cuberdoge22@cuberdoge222 жыл бұрын

    • hi tony

      @theeyesofhorror@theeyesofhorror2 жыл бұрын

    • What up tony

      @matt.bahner@matt.bahner2 жыл бұрын

    • the legend himself

      @cactus2@cactus22 жыл бұрын

  • Even scrambling it takes a LOT of time

    @NonsenseNH@NonsenseNH2 жыл бұрын

    • nonsense? nice

      @konami6479@konami64792 жыл бұрын

    • :0

      @browhat_@browhat_2 жыл бұрын

    • nonsense

      @KianCabardo@KianCabardo2 жыл бұрын

    • Seriously

      @Rand0mperson433@Rand0mperson4332 жыл бұрын

    • Hello creator of FNF vs Nonsense. Didn't know you were here

      @MannifyYT2023@MannifyYT20232 жыл бұрын

  • Max Park be like: Done in 2 minutes blindfolded

    @sammyadamssa9380@sammyadamssa9380 Жыл бұрын

  • That’s INSANE! Congrats!

    @gamingtimewithus596@gamingtimewithus5963 ай бұрын

  • This feels more like a piece of art than a puzzle. It feels like there isn't a solved position, it is awesome either way.

    @nyanSynxPHOENIX@nyanSynxPHOENIX2 жыл бұрын

    • 25x25x25 minx decagonal prism kzhead.info/sun/iNeQdK96hGSodps/bejne.html

      @ilyatoporgilka@ilyatoporgilka2 жыл бұрын

    • @Check my about page link no, screw off

      @kanaishoshinkage437@kanaishoshinkage4372 жыл бұрын

    • P part 3 bnao

      @pujaoo@pujaoo Жыл бұрын

    • Why do parts look like they were programmably milling by programmable machine?

      @kosiak10851@kosiak10851 Жыл бұрын

    • Damm, i just commented this.

      @cakeandicecream1582@cakeandicecream15826 ай бұрын

  • Mind-boggling. Can't even imagine the dedication it takes to achieve something like this. Congratulations!

    @GrahamSiggins@GrahamSiggins2 жыл бұрын

    • Oh, are you going to try to solve this blind?

      @rogervanbommel1086@rogervanbommel10862 жыл бұрын

    • dfgg

      @isyraqcraft7608@isyraqcraft76082 жыл бұрын

    • @@rogervanbommel1086 ......

      @angryzio_ind3490@angryzio_ind34902 жыл бұрын

    • i could solve this using my teeth..

      @beouiel290@beouiel290 Жыл бұрын

    • I bet you're already trying to multiblind this.

      @jamesmcgrath1731@jamesmcgrath1731 Жыл бұрын

  • Super Awesome! Congratulations 🎉🎉

    @allinonearts863@allinonearts8639 ай бұрын

  • That's alot of hardwork!

    @SupercuberReshan@SupercuberReshan3 ай бұрын

  • This is the most verified cubers I've ever seen in one comment section. Let alone people. XD. This is some phenomenal effort right here, makes me wanna do megaminx lol.

    @orangethecuber8309@orangethecuber83092 жыл бұрын

    • Agreed

      @neoglazier2813@neoglazier28132 жыл бұрын

    • The XD btw two dots dude wtf?

      @deva561@deva5612 жыл бұрын

    • true

      @exahedron@exahedron2 жыл бұрын

    • @@deva561 why are you using btw as "between" ? You know almost everyone use it as "by the way" right ?

      @napstarem7503@napstarem75032 жыл бұрын

    • @@napstarem7503 same here dude, not used to chat with anyone who uses btw as "by the way" ¯\_(ツ)_/¯

      @deva561@deva5612 жыл бұрын

  • As someone who wants to get into engineering in college, stuff like this not only motivates me, but also gives me immeasurable appreciation for your ingenuity and dedication to these projects

    @diablo6250@diablo62502 жыл бұрын

    • Nice man. Don't forget this feeling 🙌🏼⚙️ Let's build great stuff

      @meuconsagrado@meuconsagrado2 жыл бұрын

    • I'm in the same boat that's how I felt

      @THECAPITALIST12@THECAPITALIST1210 ай бұрын

    • Ya know this comment really just helped me figure out what type of engineering I wanna go into… I wanna go into whatever the fuck this is 😭

      @DavidThomas005@DavidThomas00510 ай бұрын

  • THIS IS BIGGER THAN THE MIX OF MADNESS

    @yang9919@yang99194 ай бұрын

  • Me at 90 years old: Finally! Just two more turns away from solving the Atlasminx!…*Cube pops*…*Croaks*

    @cubingninja6572@cubingninja6572 Жыл бұрын

  • seeing this in my recommended immediately brought me back to seeing the yottaminx for the first time, this is incredible

    @_thank_you_@_thank_you_2 жыл бұрын

  • Never thought I’d see a bigger minx puzzle. I’ll be damned

    @GoCubsGo2016@GoCubsGo20162 жыл бұрын

  • Wow! That is incredible!!!!

    @AleFN08@AleFN08 Жыл бұрын

  • Acabo de encontrar tu canal y solo te quiero decir que te amo por hacerlo stickerless

    @ohhh3185@ohhh3185 Жыл бұрын

  • Your scientists never stopped to ask if they “should” only if they “could”. And why would they this is dope as hell!

    @atorrance@atorrance2 жыл бұрын

  • Shengshou: I have the 19x19 cube! Coren: Hold my minx.

    @hongkonger885@hongkonger8852 жыл бұрын

    • *give me my 3D priter

      @TranparentPopsicle@TranparentPopsicle2 жыл бұрын

    • Nice

      @mrmatrix7001@mrmatrix70012 жыл бұрын

    • Omg

      @bedwargo1238@bedwargo12382 жыл бұрын

    • I think this is the most likes I got on a comment ;)

      @hongkonger885@hongkonger8852 жыл бұрын

    • @@hongkonger885 99 likes! (I already liked it, so... 100th like milestone coming up!)

      @asheep7797@asheep77972 жыл бұрын

  • Omg I haven’t heard the song at the start since 2021!!!!!! This brings so much memories back…

    @WatchPlayer521@WatchPlayer5217 күн бұрын

  • Wow patience patience 👍🏻 it’s unbelievable ! 😝 BRAVISSIMO 👏🏻👏🏻👏🏻👏🏻👏🏻

    @eaudemer100@eaudemer100 Жыл бұрын

  • THAT IS AMAZING EVEN IF PINK IS CLOSE TO RED AND THEY LOOK THE SAME. THAT IS AMAZING ITS A MASTER PIECE

    @sadman4374@sadman43742 жыл бұрын

    • Bro it's the lighting..........

      @MrMan20@MrMan20 Жыл бұрын

    • @@MrMan20 shut up idc about u>:(

      @hieplamhoang6818@hieplamhoang6818 Жыл бұрын

  • The legend has come back like a Phoenix from the ashes

    @JayJynxTrash@JayJynxTrash2 жыл бұрын

    • Ayyy harry potter reference! 😜

      @Kewbix@Kewbix2 жыл бұрын

    • @@Kewbix I mean yeah it's a harry potter reference but it's also a mythology reference too cause in Phoenix mythology is says they rise from their ashes

      @JayJynxTrash@JayJynxTrash2 жыл бұрын

    • @@JayJynxTrash ah ok

      @Kewbix@Kewbix2 жыл бұрын

  • Amazing cube very hardworking to do but the best turning is also very good literely this video makes my day

    @dasharathmohape8340@dasharathmohape8340 Жыл бұрын

  • As of 2022, the Atlasminx can now be referred to as the Quettaminx thanks to the new SI prefixes introduced in 2022. It is also the dodecahedral equivalent of a 19x19 cube. The Minx of Madness (a 21x21 cube equivalent) can keep its name since no SI prefix exists above quetta- (yet)

    @ShayminLover492@ShayminLover49210 күн бұрын

  • Hmm, I'd imagine a large portion of the movement issues come down to inherent inaccuracies of FDM printing (elephant's foot, warping, rough layer lines, etc). Even spending time to manually sand each and every piece (which is absolutely NUTS), you end up with pieces out of tolerance in a puzzle that's super sensitive to said tolerances. I wonder if most of the quality issues could be quashed by making use of a SLA printer instead! The layers are imperceptible to the naked eye and the tolerances are superb, you should totally give it a try on a smaller scale project! I'm not too familiar with the limitations of SLA printing and its cost, so I can't speak to my idea's feasibility, but if it's possible it should totally be done! In any case, this is an incredible achievement, you should be extremely proud of the monstrosity you've made here!

    @Nawmps@Nawmps2 жыл бұрын

    • After seeing FDM printed pieces, my exact thoughts were SLA would make sense here. 1 kg is around 30-50$ for regular resin. Considering that resin and PLA have around the same density, but SLA have higher space-filling resolution, the project can weight around 9-9.5 kg. So not exactly cheap thing to do, considering decent SLA printers cost upward of 1k$.

      @nikarm22@nikarm222 жыл бұрын

    • @@nikarm22 Most decent sla definitely don’t last I checked.

      @tfan2222@tfan22222 жыл бұрын

    • 25x25x25 minx decagonal prism kzhead.info/sun/iNeQdK96hGSodps/bejne.html

      @ilyatoporgilka@ilyatoporgilka2 жыл бұрын

    • @@nikarm22 Thats expensive

      @WatermeloncatSR@WatermeloncatSR Жыл бұрын

  • I did a jigsaw once. This is pure legit brilliance ...just imagine staring at nothing, thinking of bringing this to life 🤯..congratulations.

    @timothyphillips4801@timothyphillips48012 жыл бұрын

  • U just broke the world of the worlds largest Rubix cube Your a legend for building that big of a idk how to type it but nice job!

    @kelly71396@kelly71396 Жыл бұрын

  • I was wondering if you were considering updating the name of this puzzle. In the past month or so new naming conventions have been accepted by the scientific community for higher (and lower) order magnitude numbers, so the yotta- prefix is no longer the largest. With the new prefixes the Atlasminx could now be called the Quettaminx if you were to continue standard Minx puzzle naming convention. I find it kind of fascinating that twisty puzzle design and naming convention ran out of names for minx puzzles, meanwhile various feilds of science ran into the same problem prompting these new prefixes, but yet puzzle design has advanced further still as the new prefixes fail to provide a possible new name for your Minx of Madness.

    @ETCubing@ETCubing Жыл бұрын

    • Oh hi ET cubing

      @Italy799@Italy7994 ай бұрын

  • I would have expected no less from you than to get back into puzzle building and immediately go "well I need to be the biggest". Was thinking about you earlier this week. Miss you man.

    @alexandermutch7838@alexandermutch78382 жыл бұрын

  • I’m happy to see the final product. Looking forward to your next project

    @damianwilding@damianwilding2 жыл бұрын

  • Thank you very much

    @karinaleon2826@karinaleon28263 ай бұрын

  • WOW Congratulatioms to you It’s so hard thing I can’t believe

    @ResesGames@ResesGames Жыл бұрын

  • The puzzle nerd in me smiled ear-to-ear when I saw the Altas minx thumbnail. The geek/engineer in me is in awe that you had the skills, patience, and determination to complete this. Totally amazing. Congratulations!

    @msgroner@msgroner2 жыл бұрын

  • So cool Cant wait to see it in the market and see the full solve of this puzzle

    @nabilpapu739@nabilpapu7392 жыл бұрын

  • What will take longer to solve; the 33x33 rubiks cube by Greg or this 19x19 atlasminx?

    @dhiomsriram3091@dhiomsriram30919 ай бұрын

  • My full respect for this guy

    @ooijunjie7472@ooijunjie74729 ай бұрын

  • Seeing some man actually races with a actual 3d printer on fast-forward terrifies me because they spend so many hours to print a thing. I cant imagine how much effort he gives for this cube

    @barsozuguler4300@barsozuguler43002 жыл бұрын

  • Teacher: There is only one homework today Homework:

    @HuyTran-cx1nx@HuyTran-cx1nx2 жыл бұрын

  • Beautiful

    @yorichitsugikuni5606@yorichitsugikuni5606 Жыл бұрын

  • Absolutely Majestic

    @thomasriddle536@thomasriddle536 Жыл бұрын

  • That puzzle looks so AWESOME. Amazing job on building that beautiful puzzle.😀😀👍👍

    @evanthomas5378@evanthomas53782 жыл бұрын

  • Awesome man, cannot imagine the time it took to assemble and print. Truly a master of their craft

    @Crumbaa@Crumbaa2 жыл бұрын

  • That’s huge indeed 19x19 minx

    @alpharex2575@alpharex25757 ай бұрын

  • Great puzzle!

    @EddyCat1234@EddyCat1234 Жыл бұрын

  • What on earth 😳 careful its gravity doesn’t mess up the earth’s rotation 🤯 but seriously, congratulations, it is the most beautiful puzzle I’ve ever seen 👏👏👏 oh i also meant to ask, hAvE yOu EvEr SoLvEd iT?

    @matt.bahner@matt.bahner2 жыл бұрын

    • Oh hey look who it is

      @Loggog@Loggog2 жыл бұрын

  • This is one of those projects where the question is always "why?", but the answer is always "why not?"

    @thealmightyduck335@thealmightyduck3352 жыл бұрын

    • true

      @algodoomarbleracing@algodoomarbleracing8 ай бұрын

  • magnificent very well done

    @danonaogrosso218@danonaogrosso218 Жыл бұрын

  • Fantastic 🔥🔥🔥

    @munisamunisa9103@munisamunisa9103 Жыл бұрын

  • Wow,I litterally loved this cube,i cant wait for speedsolving edition.

    @doom2991@doom29912 жыл бұрын

  • Nobody: Absolutely Nobody: People Who Like To Torture Theirselves:

    @eliasujashvili7113@eliasujashvili71132 жыл бұрын

  • Wow incredible

    @JAMES-zs3pf@JAMES-zs3pf Жыл бұрын

  • No words to describe ✨

    @Taylors-version13@Taylors-version1311 ай бұрын

  • Very cool to see you zoned in and working as your 3D printer was printing!

    @neverlookingdownable@neverlookingdownable2 жыл бұрын

  • Is this a 19 layer minx puzzle? Looks like the ShengShou 19x19 has finally met it’s match!

    @MEE5_5254@MEE5_52542 жыл бұрын

  • The Master of Rubik's cube Builder

    @kylematthew2068@kylematthew20684 ай бұрын

  • so far that's the most hugest something like that cube I have ever seen 😱😱

    @Vexfibber2234@Vexfibber22349 ай бұрын

  • Excellent work, Coren! Your dedication never ceases to amaze me.

    @CubesMadeEasy@CubesMadeEasy2 жыл бұрын

    • oooooooo

      @waelasharf5512@waelasharf55122 жыл бұрын

  • Incredible, easily the most impressive puzzle I’ve seen this year

    @asianbutstupid1437@asianbutstupid14372 жыл бұрын

  • I don't have words to describe this.

    @justenjoy9001@justenjoy9001Ай бұрын

  • Hi, great project. For next one think about SLA technology, a lot more precise then FDM printers and better surface finish. You can by them relatively cheap.

    @user-zz3bz3sq9q@user-zz3bz3sq9q11 ай бұрын

  • The fact that u did that by hand, that's amazing 🤩

    @johnnybest6714@johnnybest67142 жыл бұрын

  • AMAZING WORK!!!! Congrats on the WR

    @christophermoore9849@christophermoore98492 жыл бұрын

  • Big respect for this man for making this!!

    @JustLouiseBrielle@JustLouiseBrielle Жыл бұрын

  • So satisfying

    @thetrickshoters3218@thetrickshoters3218 Жыл бұрын

  • the only thing that is still on my mind is... how many different scrambles can you make with this...if the 19x19 and everything higher has more scrambles than if you filled the entire universe with hydrogen atoms, to the power of 12, i just can even fathom what amount that would have

    @colton2266@colton22662 жыл бұрын

    • Just too many numbers 😂😂

      @gabyy-1113@gabyy-11132 жыл бұрын

    • i'd tell you the full number here, but it wouldn't fit in the comment character limit, just know that it's a lot

      @froxdoggaming3385@froxdoggaming33852 жыл бұрын

    • @@froxdoggaming3385 lol

      @colton2266@colton22662 жыл бұрын

    • @@froxdoggaming3385 but there isn't a comment character limit

      @_bio@_bio2 жыл бұрын

    • Wait

      @sawc.ma.bals.@sawc.ma.bals.2 жыл бұрын

  • I can’t believe you actually made that it’s incredible.

    @ellebrown1274@ellebrown12742 жыл бұрын

  • I am halfway through my examinx! I need one of these!

    @towerofresonance4877@towerofresonance487710 ай бұрын

  • Incredible...

    @varsrai@varsrai Жыл бұрын

  • Wow how great! "It is a beast". GOOD JOB, CONGRATULATIONS.

    @yanethperez6921@yanethperez69212 жыл бұрын

  • i've actually solved an examinx and assembled a 19x19, it's insane how you were able to assemble an examinx at this scale

    @kyokajiro1808@kyokajiro18082 жыл бұрын

  • bro this is insane😱

    @richardmarsh2635@richardmarsh26358 ай бұрын

  • Cool hardwork!

    @umashankarprajapati4909@umashankarprajapati4909 Жыл бұрын

  • Dude, you're crazy AF. That's amazing!!!

    @KIBURcubes@KIBURcubes2 жыл бұрын

    • Hola kibur xd

      @replaybordadosestampados1653@replaybordadosestampados16532 жыл бұрын

  • "largest minx puzzle in the world" This man gonna build a larger one

    @dotdyboii5023@dotdyboii50232 жыл бұрын

  • Impressive manufacturing sir

    @jimmypavone3231@jimmypavone323111 ай бұрын

  • I salute this man's hardwork

    @a.preunited9511@a.preunited9511 Жыл бұрын

  • Wow, I'm AMAZED!!! 😲 I can't even imagine how long the assembly process was! INCREDIBLE work!!!

    @hypercubemaster2729@hypercubemaster27292 жыл бұрын

    • ooooooooooooooo

      @waelasharf5512@waelasharf55122 жыл бұрын

  • Just amazing how you smashed the last world record. Good job 👏

    @olivermany123@olivermany1232 жыл бұрын

    • I agree 🙂

      @matt.bahner@matt.bahner2 жыл бұрын

    • @@matt.bahner Will you ever return to KZhead?

      @jacobgoddard9688@jacobgoddard96882 жыл бұрын

    • @@jacobgoddard9688 yes I want to! I’ve recently got back into speedcubing and it’d be cool to start building again. Seeing this turn out so well on FDM makes me want to get my own printer 🙃

      @matt.bahner@matt.bahner2 жыл бұрын

    • @@matt.bahner Yay!

      @jacobgoddard9688@jacobgoddard96882 жыл бұрын

  • Amazing🎉

    @THEREALBONEVR@THEREALBONEVR28 күн бұрын

  • Honestly this deserves it's own boss theme something like < < Against The Minx > >

    @Flightkitten@Flightkitten Жыл бұрын

    • Battle Against a True Puzzle

      @iurylaranja9@iurylaranja99 ай бұрын

  • "The biggest Minx in the world" Moyu, Gan, Yuxin, and other cubing companies that can easily make a 21x21 Dodecahydron: "You dare oppose me mortal?"

    @amazineverythin7163@amazineverythin71632 жыл бұрын

  • absolutely crazy, i'm in awe

    @Sami-pq8lm@Sami-pq8lm2 жыл бұрын

  • this is a great Master ✔️

    @mrmobile3037@mrmobile3037 Жыл бұрын

  • Amazing!!

    @ektapathak2741@ektapathak2741 Жыл бұрын

  • When an atlasminx is smoother then your megaminx.

    @jessecuber7653@jessecuber76532 жыл бұрын

  • this is so incredible !

    @amitspielman5615@amitspielman56152 жыл бұрын

  • Man solving this will take an while, hope to see if there be an improve verison

    @IceDiamondArmy@IceDiamondArmy Жыл бұрын

  • That’s amazing. What would be even cooler is if you scrambled it and solved it 🗿

    @kaibob@kaibob9 ай бұрын

  • Going stickerless was a smart move.

    @TabularJoker@TabularJoker2 жыл бұрын

  • gotta give you props for somehow keeping the puzzle from popping its pieces with the unexpected smooth turning

    @nevv7130@nevv71302 жыл бұрын

  • OMG, this is a very amazing puzzle thank you for the vid, but hard tho

    @OmaBix@OmaBix7 ай бұрын

  • That’s really cool congrats

    @thatonedudewithyoutube3305@thatonedudewithyoutube3305 Жыл бұрын
KZhead