KZhead

Is it impossible to laser weld an open gap?

weld [HAGOJIBI]
2023 ж. 14 Қаң.
687 042 Рет қаралды
Жүктеу

For information on welding machines and peripherals, you can get more accurate answers by contacting the manufacturer.
↓↓↓↓↓↓↓
korea@nswel.com
Hello everyone.
There seem to be many people who think that laser welding can only be used when there is no gap.
TIG welding, MIG welding, electric welding, laser welding, etc...
Each of these welding methods has its own characteristics and strengths and weaknesses.
If you learn the characteristics and strengths and weaknesses of the laser welding machine, it seems that the fields that can be applied will be diverse.
Today, I put some of them in the video.
I hope today's video has been helpful in solving many people's questions.
Thanks for watching and have a nice week.
#laser
#welding
#machine
#TIG
#welding
#test
#steel
#crafts
#tips
#tricks
#hacks
#secret
#amazing
#DIY
#idea
#future
#technology
#pipe
#HAGOJIBI
#videos
#laserweldingmachine
mig welding
electric welding
welding machine
TIG welding machine
argon welding machine
mig welding machine
electric welding machine
laser welding machine

Пікірлер

  • Would like to see a follow up video on a strength test please, on one of those pieces that you weld. The public like myself need to know how strong those weld are!! Nice video on the test pieces👍👍

    @larryrabathaly9503@larryrabathaly95039 ай бұрын

    • they are pretty strong,just look at space X rockets they are mostly welded by laser

      @axieologist8962@axieologist89622 ай бұрын

    • you notice how with all of these vids, they dont show the underside. the weld through. thats because its non existant. this is such a superficial welding technique. it basically offers no strenght.

      @sollitdude1@sollitdude1Ай бұрын

    • ⁠@@sollitdude1Hmmm. We need a damn strength test lol.

      @chrisp9046@chrisp9046Ай бұрын

    • @@sollitdude1 it's not actually the case, it looks so gentle welding, it gives the impression of no penetration, but there is excellent penetration with laser welding. It will take some getting used to.

      @joey66436@joey6643625 күн бұрын

  • I love this channel. HAGOJIBI, Salute!

    @flatwater5@flatwater5 Жыл бұрын

  • Your videos are always top , thank you very much for sharing the precious information ,have a nice day.

    @zibobpompon5768@zibobpompon5768 Жыл бұрын

  • Excelente tutorial maestro

    @bymanrique62@bymanrique62 Жыл бұрын

  • Woow..You solved a big doubt in my mind which I asked many manufacturers and suppliers but they couldn't demonstrate nor could they explain me. However, I still have some doubts about the welding joint quality, in terms of welding strength. But thn too this looks good for ligh applications. Thanks a lot for such a beautiful demonstration.

    @supdasaaf@supdasaaf Жыл бұрын

  • 오늘도 좋은 영상 감사합니다 용접도 계속 진화하는것을 느낍니다 감사합니다^^~

    @kcgjun@kcgjun Жыл бұрын

  • Excelente maestro una consulta , en cuanto a resistencia la soldadura laser es mas fuerte debido a que es a nivel molecular ??? O no ay tanta diferencia con la tig

    @bartolomealejandrovargasir9759@bartolomealejandrovargasir9759 Жыл бұрын

  • Excelente tutorial maestro, está claro que con paciencia , buena mano y un poco de aporte de relleno,todo se consigue,un resultado final muy bueno, gracias por compartir tanta sabiduría, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 💪🤓😜

    @viorsa8200@viorsa8200 Жыл бұрын

    • Pakane opo

      @suyitnosuyitno6933@suyitnosuyitno693310 ай бұрын

  • excelente video, gracias

    @rucofeo@rucofeo7 ай бұрын

  • Bom dia. Está máquina está disponível para venda no Brasil. E se positivo...qual valor?😊

    @naturezalivre4615@naturezalivre46159 ай бұрын

  • Good demo HAGOJIBI!

    @j.muckafignotti4226@j.muckafignotti4226 Жыл бұрын

  • Muito bom os esclarecimentos.

    @edinilpg@edinilpg8 ай бұрын

  • Great content. Very helpful. Thanks a lottttt!

    @arthurhuang1435@arthurhuang143511 ай бұрын

  • Muito bom!! Será que solda ferro fundido?

    @edgarartesgregas258@edgarartesgregas2589 ай бұрын

  • that's very good. Please provide an example of welding fish scales (beads) on aluminum using laser welding🙏🙏

    @mohamadafwan5761@mohamadafwan5761 Жыл бұрын

  • What velder are you using? Exact model?

    @MrBromegrass@MrBromegrass6 ай бұрын

  • Спасибо за видео , я думал что с зазором более 0,3 мм вообще не возможно варить лазерной сваркой .

    @magrustam5198@magrustam5198 Жыл бұрын

  • Great You solved my queries which many manufacturer could not solve but your demonstrate explain me. However, I still have some doubts about the laser welding equipment and it's usage Thanks a lot for such a beautiful demonstration.

    @samirjoshi1995@samirjoshi1995 Жыл бұрын

  • As a laser welding equipment supplier, we have to say nice job

    @SPXlaser@SPXlaser Жыл бұрын

    • Where? US? Korea?

      @koreanmtnbiker2931@koreanmtnbiker29319 ай бұрын

  • Which welding gun is better..? Qilin, relfar, raytools..?

    @dharmendrasuthar4342@dharmendrasuthar4342 Жыл бұрын

  • Show de bola, abraço..

    @raimundononato2278@raimundononato2278 Жыл бұрын

  • Thanks

    @t0162610@t0162610 Жыл бұрын

  • I want to see the root of the weld?

    @marianmajersky9160@marianmajersky9160 Жыл бұрын

  • 예전부터 궁금했었는데.. 레이저 용접기 사용할때 와이어 피더기를 사용하지 않고 일반 티그봉을 갭 사이에 끼워놓고도 작업이 가능한가요?

    @user-kw2wu7qy1q@user-kw2wu7qy1q Жыл бұрын

    • 원리를 보면 끼워지기만 하면 가능하겠는데용?

      @user-ii9dr7oe2y@user-ii9dr7oe2y Жыл бұрын

    • 가능은 합니다. 다만 일반 티그봉의 파이수가 레이저 용접기 필러의 파이수보다 크기 때문에 레이저 용접기로 녹여서 갭을 채워주기 위해서는 출력을 높여야 하는데 낮은 용량의 레이저 용접기로는 힘듭니다. 그리고 잘못하다가는 빛반사때문에 본체에 대미지가 올수도 있고 익숙하지 않으면 레이져 용접기 필러를 이용하는것보다 용접 품질이 매우 떨어질수 있어 추천하지는 않습니다.

      @user-ko7lq3zf8p@user-ko7lq3zf8p Жыл бұрын

    • @@user-ko7lq3zf8p 오. 용접품질은 떨어질수 있겠다 생각했는데 빛반사로 장비가 타격받을수도 있군요.

      @user-oq5cq3eq9m@user-oq5cq3eq9m Жыл бұрын

  • Good content.

    @Allan-mf1he@Allan-mf1he Жыл бұрын

  • Very good👍

    @user-rt9vs3lb4f@user-rt9vs3lb4f Жыл бұрын

  • Can use this láser to quit corrosion in steel??

    @lukaleiza1125@lukaleiza1125 Жыл бұрын

  • 유공압 실린더용 튜브의 포트나 헤드커버도 레이저 용접으로 가능할까요?

    @JeonCK@JeonCK Жыл бұрын

    • 주로 박판쪽 이나 변형에 민감한 제품에 장점이 많습니다. 포지션만 좋으면 유공압쪽에도 괜찮을거 같습니다.

      @weldHAGOJIBI@weldHAGOJIBI Жыл бұрын

  • 접지랑 알곤가스가 필요 없나요???

    @kimym757@kimym757 Жыл бұрын

  • can you run it with the wire feeder on top and walk the cup?

    @Hanzzzzz5@Hanzzzzz5 Жыл бұрын

  • Amazing

    @rajanoana9318@rajanoana9318 Жыл бұрын

  • Super

    @patricksalmon3494@patricksalmon3494 Жыл бұрын

  • Очень полезно, спасибо, я с такими зазорами уже намучился, буду пробовать по вашему методу😉👍

    @user-vz7bm8ni8d@user-vz7bm8ni8d Жыл бұрын

    • Получилось?

      @hackworker5395@hackworker53957 ай бұрын

  • 보면 볼수록 레이저 용접이 미래 같습니다. 나중에 가면 외부 작업도 될만큼 용이한 크기로 줄어들수 있겠지요?

    @HoongEi@HoongEi Жыл бұрын

  • What size wire and feed rate are you using for the gap bridging? Thanks.

    @gabrielholmes816@gabrielholmes816 Жыл бұрын

    • Depending on the gap, if your wire falls through the gap it's makes it harder to laserweld. But not impossible then you need to play with feed rate and wobble frequency. For easy closing a gap, use wire that doesn't fall through it. For example if the gap is 0,9 mm, you can use a 1,0 mm wire and just weld at a normal speed, if using a 0,8 mm wire you need lower the feed rate, so it fills it up. Trial and error my friend, goodluck!

      @loweek9646@loweek9646 Жыл бұрын

  • The wire melt faster than the size of the gap. I mean in the gap stay to long in liquid form the melted metal(wire). Probably a bit ticker wire or faster feed rate or even wider laser beam would doing amazing job. They using laser in car factory and everywhere nowdays, so the gap is not problem at all.

    @laszloszell8753@laszloszell8753 Жыл бұрын

  • Karbon Stil yada paslanmaz borularda kök atabilir mi bu makina

    @ahmetmauro9508@ahmetmauro9508 Жыл бұрын

  • Kamsamnida, addashi! Great video, and my mind is made up. I am buying a laser welder.

    @TimeSurfer206@TimeSurfer206 Жыл бұрын

  • Who makes quality laser welders and what is the price point?

    @dishdog215@dishdog215 Жыл бұрын

  • Can Copper and Brass laser welding ..??

    @raviramvr2793@raviramvr27938 ай бұрын

  • Que precio y donde se puede adquirir el equipo de soldadura láser

    @fernandofernandez1894@fernandofernandez189411 ай бұрын

  • also very curious how the other side of the samples that have been welded look, good penetraition? brittle? also curious how you handle the radiation from the laser. the gloves don't really look sufficient for you personal saftey

    @FreakensNL@FreakensNL6 ай бұрын

  • Vừa giỏi tay nghề. Vừa công nghệ cao

    @tudo9466@tudo9466 Жыл бұрын

  • What parameters of laser do you use scan with, scan speed, wire speed?

    @user-fs8kc3fy2m@user-fs8kc3fy2m2 ай бұрын

  • Saludos cordiales como puedo comprar una de estas soldadoras láser para Ecuador.

    @alfrederraez1589@alfrederraez15895 ай бұрын

  • This video shows everything is possible

    @hslaseracademy@hslaseracademy Жыл бұрын

  • 자동화 기기가 좋아질수록 밥그릇이 사라지는 기분이에요..ㅋㅋㅋ

    @user-gm6kp2hz6u@user-gm6kp2hz6u Жыл бұрын

  • Ой не зря он пластинку не перевернул! Но торец показал - там провару 2мм только. И чо с этим делать потом?

    @Mr.Moy-Gospodin@Mr.Moy-Gospodin Жыл бұрын

  • 2 things. First let's see the back side after a weld. Second do a cut and etch of a weld or 2 done with this machine. I've seen too many pretty welds fail over the years to trust this process without those 2 things.

    @willgallatin2802@willgallatin2802 Жыл бұрын

    • When using the appropriate materials/filler material its as strong as most mig/tig welds. Tensile strength is tensile strength regardless of the transfer method right? There are many more dangers that come with this process though. The laser can burn or blind you MUCH faster than a traditional mig or tig set up. It is not recommended to use this in general shops, it should only be done in enclosed areas to protect bystanders and with proper PPE. Takes less than a second to severely injure your eyes or go blind without proper eye protection

      @d8l835@d8l8359 ай бұрын

    • MIG and TIG are also very different in strength.. penetraition, inclusions, temp, etcetc all factor in the tensile strenght in the end.@@d8l835

      @FreakensNL@FreakensNL6 ай бұрын

  • I was shown a machine that could weld an open gap. Interesting technique though not very simple to do without a wire feeder.

    @21gioni@21gioni Жыл бұрын

  • 이면비드 나오나요?

    @axlance73@axlance7311 ай бұрын

  • How much for one of those Lazer welders? Would be pretty cool to have one. Almost like Mig welding seems like.

    @benjamincullifer165@benjamincullifer165 Жыл бұрын

    • I priced a brand new LightWeld laser welder going for $22,000+ in US dollars. Depending on what bells and whistles one may want. I don't know what manufacturer's brand is being used in the video here. There's not too much in the video description about brand name. But, you know what they say, ""If one has to ask the price, it probably cannot be afforded.""

      @RenKnight347@RenKnight347 Жыл бұрын

  • wow impressive

    @shawncell1247@shawncell124711 ай бұрын

  • wig=wolfram inertgas + current, Laser is focused light. The arc during TIG welding is also UV radiation, but as a by-product

    @mekkertroniker2002@mekkertroniker20026 ай бұрын

  • Una pregunta la soldadura láser se oxida disculpe mi duda

    @leonardocalderon140@leonardocalderon1406 ай бұрын

  • if you use filler to start the tig weld on the no filler one with the gap it works

    @Trosity@Trosity Жыл бұрын

  • Всё возможно. Спасибо

    @krassaucheg@krassaucheg Жыл бұрын

  • What does namida mean?

    @sjaakvkoten6061@sjaakvkoten60617 ай бұрын

  • Could you cut the plate to see the penetration of laser welding

    @iqbala1104@iqbala1104 Жыл бұрын

    • Watch previous video to watch the penetration capability LOL

      @LeeMooEez@LeeMooEez Жыл бұрын

    • @@LeeMooEez but question is about penetration and porosity of open gap bridge lol

      @boobrowsky@boobrowsky Жыл бұрын

    • @@boobrowsky LOL…did I say different thing then? 🤔🤷🏻

      @LeeMooEez@LeeMooEez Жыл бұрын

  • How to adjust laser parameter

    @Terng888@Terng8882 ай бұрын

  • Hi , show us with à pipe please

    @elitl1148@elitl1148 Жыл бұрын

  • The number of times I've told coworkers to not leave gaps when laser welding without wire because of the joint type and I start making holes from gaps and the ones that haven't used the machine just tell me to tweak the settings

    @pieshka4509@pieshka4509 Жыл бұрын

  • But at the 4.37 min the material is changed. Much smaller gap on the second piece of material. The gap on the first one is really difficult to fill it.

    @gaborgindele805@gaborgindele805 Жыл бұрын

    • He goes to do it 5:30. But yes that was strange.

      @andreaspoulsen8017@andreaspoulsen80176 ай бұрын

  • Atogeneous?

    @travisjones9508@travisjones9508 Жыл бұрын

  • 빽은 나오나요

    @user-ni1hr5cl7l@user-ni1hr5cl7l Жыл бұрын

  • @IC welding using this no problem

    @rashidnaga3028@rashidnaga30282 ай бұрын

  • Yes

    @garydonnison3836@garydonnison38362 ай бұрын

  • 👏👍

    @user-pp3nf1td7o@user-pp3nf1td7o Жыл бұрын

  • I bought an intercooler that was Laser welded. Probably no material used, I immediately took it to work and dropped some dimes on it.. won't blow apart now..

    @justiceofthesun7303@justiceofthesun7303 Жыл бұрын

  • ❤👌👍

    @davoodzarei695@davoodzarei695 Жыл бұрын

  • Absolutely crazy-awesome!! Now, when will Harbor Freight push out a cheaper version; I don't have a spare $20K lying around...🤓

    @AXNJXN1@AXNJXN1 Жыл бұрын

    • Never buy the first couple of Harbor Freight versions. Wait a little while for them to work the bugs out. Peruse the comments section in the meantime for light reading material entertainment until HF gets things together enough for a yay or nay decision. Though, I'm totally with you on not having that extra $20K+ burning a hole in my pocket!

      @RenKnight347@RenKnight347 Жыл бұрын

  • Отлично

    @Dilmurat76@Dilmurat76 Жыл бұрын

  • Is this a real idiom?

    @tradetop007@tradetop007 Жыл бұрын

  • those welders are very expensive

    @jimorgain63@jimorgain637 ай бұрын

  • wow...that laser welder is so beginner friendly any one can use it without skill

    @starofeden9277@starofeden92776 ай бұрын

  • В России уже много лазерной сварки, это уже не новость! удачи автору!

    @user-qb2cg2ie4c@user-qb2cg2ie4c6 ай бұрын

  • Я заварю как нехрен делать лазером )

    @greatrat2863@greatrat28633 ай бұрын

  • smart and lasers can clean it afterwards

    @marchelandersen6839@marchelandersen6839 Жыл бұрын

  • My Korean aint so good, but his finger wagging was easy to follow😂 Kou-mop-sue-me-dah

    @dishdog215@dishdog215 Жыл бұрын

  • Хон сюн Дин шин Камеда😂

    @VovaVoda@VovaVodaКүн бұрын

  • хорошо показал,профи!!!!👍👍👍👍👍

    @user-zy7qy2ig2p@user-zy7qy2ig2p3 ай бұрын

  • I can do laser welding with gap. No problem. Need to adjust filler setting and style of welding.

    @asalbolehjer1952@asalbolehjer195210 ай бұрын

  • 나래이션?!? 헐

    @ebw8374@ebw8374 Жыл бұрын

  • 🙆🏻🤗

    @user-pr8qm3pk6o@user-pr8qm3pk6o Жыл бұрын

  • mira, mira again again i heard always saying mira”

    @rascuvalentin669@rascuvalentin669 Жыл бұрын

  • Thanks for educating us on laser welding. But this education isn't complete if you forget to show how the other side of yhe welded plates look. Lol or whatever.

    @Quantum-Entangled@Quantum-Entangled6 ай бұрын

  • 2:20 Shows your impressive skill for the right amount of filler

    @DerDermin8tor@DerDermin8tor Жыл бұрын

  • 😘

    @faresaklan7657@faresaklan7657 Жыл бұрын

  • How much metal actually stays on the plate cause that's a while bunch of waste

    @howardgillingham4763@howardgillingham4763 Жыл бұрын

  • Нихрена не понял, но очень интересно

    @user-xc3vi4cf4j@user-xc3vi4cf4j6 ай бұрын

  • Laser is garbage. Fusing is garbage unless it's an outside mitered corner of something non structural.. I don't see Laser working for anything but cosmetic decorative purposes

    @justiceofthesun7303@justiceofthesun7303 Жыл бұрын

    • Benim de şüphelerim var

      @accipiter@accipiter Жыл бұрын

  • 레이저용접 사기인데?

    @sshk9189@sshk9189 Жыл бұрын

  • Why are you embarrassed to show the reverse side of the weld? Is it for adults only?

    @user-zy3eb4tt2i@user-zy3eb4tt2i Жыл бұрын

  • Jimmy Dah................. hami Dah.................. Simi Dah............. Timmy Dah......... What Asian language is spoken? Thanks

    @manonboard6458@manonboard64586 ай бұрын

  • xiexie😁

    @hooknose75@hooknose757 ай бұрын

  • Jelek bos.. Hsil las dekok.. 😆

    @idahalwakaf2118@idahalwakaf211811 ай бұрын

  • I understand you are paid to do a laser welder commercial, but use a cheat in the video! I weld a lot of thin sheets with a TIG machine in pulse mode and they do not distort. Welds get as good as your laser! Show the full capabilities of TIG welding and do not use cheating!

    @labnes@labnes5 ай бұрын

    • The biggest benefit to a laser welder is speed and ease of use. You can make welds 10x faster than doing the same ones with TIG as long as you can click a button. Not to say laser welding is superior than tig, but its hard to beat just how fast and easy these things are.

      @jweeeo@jweeeo4 ай бұрын

  • 조선족임?? 말투가 왜저래

    @user-vm7bw6gj9e@user-vm7bw6gj9e Жыл бұрын

  • A bunch of incompetent and misinformed information on here !

    @michaelvaughn7137@michaelvaughn7137 Жыл бұрын

  • Photons and electrons are the same, one is travelling a different way to the other. So they can both do the same thing. Which is obvious

    @sammyd7857@sammyd7857 Жыл бұрын
KZhead