HHO FUEL CELL. BEST CHEAPEST EASIEST FASTEST WAY TO MAKE ONE..
Пікірлер
The switches act as a fuse only because you melted the contacts in it with too much current draw. For safety add an in-line fuse. Don't rely on the switch failing as your safety
@thehousedr4 Жыл бұрын
Realy this guy didn't do real effort as to facts It's not acidic because of baking soda Its effect of electrolysis. That potscrubbers is not a winning recipe He mentioned the vessels to be watertight He should inform that it should be gas tight As hydrogen is very much smaller as water As hydrogen can escape through metal vessels Get your facts right This is a basic, not very successful "patent"
@christohuyser Жыл бұрын
@@christohuyserlet's see a video of ur setup Mr smart guy
@taylorclark10827 ай бұрын
Many of us would love to see a further video detailing how the Del Sol runs with this Brown's Gas supplementation/technical considerations involved with such a system!!!
@tiptronic4202 жыл бұрын
Yeah, so would I. My thoughts are it's not producing no where near enough gas to be of any value.
@charlesmyers976511 ай бұрын
I see that he's following all of the basic shop safety protocols. ;-)
@DavidRTribble2 жыл бұрын
"There's no science to it" Nek minute " theres to much salt in it I think" 🤣 Great video.
@raymondjohn88962 жыл бұрын
This is a very great video especially for the automotive mechanics. I love it.new friend here sending hugs and colors to your channel sir thanks sir
@stranger63663 жыл бұрын
Fantastic. Great thinking - outside the box.
@mrstratau65132 жыл бұрын
Incredible 👏👏👏
@arthurcpiazzi2 жыл бұрын
You inspire me, Thanks for always sharing....
@hazyhaul57202 жыл бұрын
You are a madman. I love it.
@Gearshock2 жыл бұрын
Great music in the background
@timshen65162 жыл бұрын
Nice video, simple generator with good production. The amount of salt/ baking soda is kind of important. My first prototype was a big glass pickle jar with a metal lid. I added too much salt and melted my wire and the rubber washer going through the lid, it jumped sparked and 💥. Use plastic for sure. Also, you can put the fuel hose way down to the bottom of the container, then flip it upside down. All of the electrical pieces will then be under water.
@jeremyray010 Жыл бұрын
Especially appreciate your added safety measures. Well Done.
@robertdoell4321 Жыл бұрын
Our plastic bottle is collapsing under the vacuum pressure, help?
@amberandrews684210 ай бұрын
Well man its time to change the world you are a direct contribution i promise you. Thank you. Amazing sometimes its hard to not over think things... wow.
@bestowicprimer88352 жыл бұрын
It every nice video thanks so much
@garibafuseini5104Ай бұрын
Here from NightHawkInLight's video. You could make it a lot more efficient by using a DC-DC buck converter to run it at 2-3V instead of the full 12V. The hydrogen production is based on the current, not the voltage, so as long as your cell can pass enough current (add more surface area or baking soda), it'll produce enough hydrogen. For electrolysis to happen you need 1.23V. The rest of the voltage drop is turned into heat. Also, I don't buy the efficiency gains, but I believe burning some hydrogen is good for lowering soot emissions in diesel engines. Maybe it does something for petrol too.
@ThisRandomUsername2 жыл бұрын
Here from the same- salutes to flame proof beards 💪🎓👍
@andycoppes2 жыл бұрын
not a cheap one tho, they can only handle a few amps
@ginokrol2 жыл бұрын
Hi Jodie, could you teach me how to make basic setup, you sound really intelligent
@Gymson2 жыл бұрын
You 2-3 volts, what about the amps, how many amps?
@1hflore1ify2 жыл бұрын
@@Gymson dont use salt, it creates chlorine gas
@cryptoworldgames Жыл бұрын
Please make an update video of the del Sol running on HHO
@jaimebarajas6623 жыл бұрын
Nice design.
@tomaspecl10822 жыл бұрын
YOUR THE MAN DUDE I GOT some similar stuff and followed your instructions over ALL OTHERS For my very first attempt to produce fuel savings havnt installed or tested in my automobile. However I know alot more about electricity then you do im assuming anyway plus i intertwined the bare wire excessively and spead the wire all the way around almost weaving it into the pot scrubers also I used 10 gauge quality audio wire with short runs and I achieved way way more gas then I expected I am convinced your method is by far superior to all others. I achieved massive production using your method. So thank you my guy for teaching me the most effective and efficient way to achieve ELECTROLYSIS.
@leetomich147 Жыл бұрын
What if you used like a silk sock
@Coincidence_Theorist Жыл бұрын
Have you used it yet? Use a flash back arrester/bubbler
@Coincidence_Theorist Жыл бұрын
@@Coincidence_Theorist YES I BEEN USING IT although I don't see tons of mpg witch is a bi
@leetomich147 Жыл бұрын
This is definitely not the most efficient way & heck the guy even reduced the HHO production intentionally which is a real head scratcher
@Dan0rioN10 ай бұрын
Well ,how clever can a guy get ? Apparently very clever . When you see all these complicated and expencive set-ups ,this is so refreshing to see .No doubt , i,ll be giving it a try as my Chev. pickup uses way too much gasoline . I,m optimistic this,l work ,we,ll see . But thank you for showing us a better way,keep ,er up .
@cecilsabourin94622 күн бұрын
Love it bro!!!
@colepuleo6809 Жыл бұрын
yeah great job! +1 for your channel^^
@x.plicit2 жыл бұрын
AWESOMEEEEEEEE
@robin20802 жыл бұрын
I enjoyed this video, hard to believe it works
@ne1cup Жыл бұрын
Nice. But your stock Honda battery/alternator setup can't deliver the 1.21 jigawatts the flux capacitor needs.
@carljames48622 жыл бұрын
sweet and cheap and fast. I do t need a shop like all the other methods. Can't wait to try this. c9nsider a water trap inline incase it's pushing water like this example maybe.
@Grizly_Atoms2 жыл бұрын
I made this for my car, I was very low on gas, I didn’t have gas money but I had this so I used this and I was glad I had made this. I’ve only used this once, I made 3 of these.
@mzsinko09842 ай бұрын
Clever! Would I be able to make Hydrogen / oxygen seperator out of this as well? I need to start making pure oxygen for cluster headaches.
@LouiesLog Жыл бұрын
What happens when you start driving down the road and this container is bouncing along with the car and the liquid in the container is sloushing around ? Does this cause problems?..I had a really small version of this in the 80s strapped in my Chevy Malibu with a separate safety bottle with water in it as a stop and then also a mesh in-line filter before the intake tap .
@TripleB101 Жыл бұрын
Use at least 10 gauge wire. Put a 30 amp fuse/breaker inline. And a 30 amp switch. No more hot wires and burnt out switches. Add a second burp can. From the electrolysis tank, over into and down toward the bottom of an empty canister. From that, the hose is right at the top. Both sealed. From there to your intake.
@MNJay13 жыл бұрын
Or a 30 amp relay with one of the existing switches.
@PorchPotatoMike2 жыл бұрын
Love this!!! When you make more of them,can you drive 100% on hho and eliminate fuel? What do you think?
@anxietychannel Жыл бұрын
Please let us know what the difference is between gas only consumption & gas/hydrogen. Also what problems you had with sensor that monitors the exhaust gas on the exhaust. I have seen others having to install an over riding device to compensate.
@briandavies1809 Жыл бұрын
Defiantly use a relay and a fuse for the power circuit. Run the gas thru a bubbler for safety and use check valves in the hose going to the engine for backflash suppression. I have run my 99 Ranger on HHO for a couple of years now, giving me dual fuel capability. Running HHO into the engine while using gasoline results in a huge mileage and power increase. My Ranger's 2.5 4 cylinder now runs like it was an old style 302 BOSS V8. My HHO generator is a Dry Cell type (Again for Safety) and is mounted where the air filter used to sit.(I now use a conical Racing cold air intake filter.) A reserve tank of water/soda mixture (2 1/2 gallons) also acts as the bubbler. First time I ran the truck on HHO, it spit out soot for over 20 miles @ 55 MPH, clearing out the carbon buildup. It did eventually rust out the muffler (It was OEM to start with and rust eaten) and I replaced it with the new version of the glass pack Cherry Bomb muffler. Still quiet until you punch it. Then it roars. BTW The engine has 221000 miles on it.On visual inspection of the valves and pistons, very little carbon is there, as of October 2022 when I installed new E3 spark plugs. (8 on this Ford engine)
@geekhillbilly2636 Жыл бұрын
Doesn't the water rust out internal motor components??
@Dan0rioN10 ай бұрын
I would like to see your setup.
@theodoremartiniii46378 ай бұрын
Like that music ,and whom it was at 60 seconds? Tune while teaching,yeaaaaah😊
@toddwodja27443 жыл бұрын
Since you're not storing HHO no worries of some big explosion happening, would just pop the container. Can also put a one way check valve on the tube to prevent flashback. Running 100% HHO has no ill effects either on engine, long as its flammable and very burnable and not dirty you are good to go.
@Ryan-vb6jb3 жыл бұрын
Actually, it has ill effects on the engine. Hydrogen makes steel brittle. If you use this long enough, there will be cracks forming at the contact areas, or worse.
3 жыл бұрын
@ 🤣🤣🤣 bullshit I have been running my car on it for 8 years.
@raymondjohn88962 жыл бұрын
@ That's not how hydrogen embrittlement works. There are researchers that are still storing hydrogen in the same mild steel tanks captured from the Nazis in world war 2. The tanks are instepcted and pass their tests every year. You need some type of electricity such as arc welding to cause embrittlement. Burning hydrogen in an engine does not cause embrittlement of the engine.
@swirlingabyss2 жыл бұрын
@@swirlingabyssthe HHO DOESNT get stored its burn as it is made by making the air your engine needs a more combustible feed - sheesh these over thinkers are insane. Prolly vaccinated as well.
@julien12 жыл бұрын
Yeah this isn’t new stuff I did it during the 80s for the same purposes and it work very well as long as you maintained it ..engine ran smooth and clean Chevy Malibu…lol my mechanics were wondering what the hell lol 😂..it did increase acceleration (little), gas mileage(little )and cleaned the engine with better combustion and less crud ..worked great for me ..planning mounting another on my Chevy truck.
@TripleB101 Жыл бұрын
Just use a one-way filter to prevent back-flow blasts.
@itzcaseykc Жыл бұрын
greetings from Ireland. i drive a 2.2 litre diesel ford transit. your build is the best ive seen yet. very user friendly. Just wondering if i pu the tube in the intake before the turbo. Ive used egr valve cleaner in the air intake just after the air filter. does it go in around there? Thanks for your content.
@gregduff1458 Жыл бұрын
Run it threw the break booster in most cars
@timchandler4427 Жыл бұрын
How often do you have to change your caustic mixture?
@That1E_K1129 Жыл бұрын
Might want to use a relay off the ignition to allow the switch that turns this thing on to be activated.
@Boosted98gsx2 жыл бұрын
Is it possible to run an engine purely on the H.H.O gas? For instance, start the engine on fuel, activate the H.H.O generator, and have a switch to disconnect your petrol pump? A logical problem for me will be how to control the volume of gas needed going through the gears speeding up and slowing down?
@martinbisschoff9882 ай бұрын
How about during the winter... Will there be issues with the liquid freezing? I live in NH.0
@pdionne03901 Жыл бұрын
Start it up ! I want to see 🙈 an engine running on hho 😂😂
@brianfroats12973 жыл бұрын
What happens when you put 10 or 20 of them together for the car engine? Do you still need gasoline?
@anxietychannelАй бұрын
“Lonely sock” ... that sounded naughty.
@LokiScarletWasHere3 жыл бұрын
Nice manifold.
@herenow28956 ай бұрын
We're you at man need a follow up is your engine still good I would like to do this but it's the only car I got and you still have to use day in the gas tank right pls hit me up on this
@yashuasaves52072 жыл бұрын
I had a lot of "lonely socks" growing up. But that was different.
@TheWhoremonger69 Жыл бұрын
Im going to try this. But im going to use a slightly thicker gauge wire.
@Syirus2020 Жыл бұрын
Using a switch as a fuse is a no-no as they can fuse on. Relays are cheap, use any switch with a relay and the switch will last forever. Relay will last longer too. When people say they wired to ignition source, they're not talking about using ignition power. They're referring to a power source that switches on when they key is in the "on" position. You will have a spare slot in your fuse box for this so it will shut off with the engine.
@FroztiProductions Жыл бұрын
I knew the guy's origin video. So cool.
@gilbertopaludetto590 Жыл бұрын
This system will work for about 5 minutes...as soon as the copper starts to oxidize it will reduce the out put pretty significantly...stainless steel locking wire works best. Tried using copper once ...( stainless is much more expensive) worked great for 5 minute then hardly worked at all.. Been using it 20 years in my 2002 Jeep GC WJ still works great, with minimal maintenance... One of the keys is not to use to much electrolyte...I use one Tspn of Baking soda, never had an issue.. I pick up around 8 miles to the gallon on the Hywy.. It also cleans out almost 100% of the carbon in the engine.. I'm running 90,000 on the last tune up... the o'l girl runs great, lol Have fun !! it certainly is a process
@mikeespo77288 ай бұрын
I have a few questions. I just made mine but I am running too many amps. What are you doing to lower the amp output?
@TopTierFX2 ай бұрын
Have you had any problems using a plastic tank?
@TACOMASRT59 ай бұрын
I love the raw approach to recording this, especially the possibility of it blowing up and dumping water on the old shop floor.
@SmallGuyonTop Жыл бұрын
If you stick one of these sock-scrubber electrolizers in a chamber that continuously refilled with water as it was used up in the reaction, such as a toilet tank. And powered it with a relatively cheap continuous source of energy, like a solar panel. You could effectively produce a near endless supply of HHO, right? And incidentally you would also be continuously concentrating Deuterium in the water that remained.
@sethapex9670 Жыл бұрын
If you use AC instead of DC could it add any benefit? Stanley Meyer used AC for his one. You can play with the hz then, it seems he got good results with several kHz
@aendum2 жыл бұрын
Oder einen PWM
@stefanturnage8962 Жыл бұрын
I have tried to make many of these wet cells and in my experience they always get gunked up in no time even with stainless steel plates & distilled water. They also overheat easily due their poor thermal efficiency. I even had a wet cell explode in my face I believe it was caused by an electrical spark inside of the cell due to a corrosion on a terminal. I didn't get hurt the lid just blew off but It was so loud it damn near blew my eardrums. I have never had any of these issues with dry cells.
@HighVoltageMadness3 жыл бұрын
I did the same thing and the water mixture inside the jar becomes super warm, is this normal? Do you get the same issue?
@TheXxXxX86 Жыл бұрын
I used that same container mounting a hho generator on my golf sport wagon and that seal didn't work well after it gets wet it doesn't seal so I had to find a different container next one melted so now I'm searching for another container that will hold up to the heat that the hho generator produces.
@l.k.l1971 Жыл бұрын
Will this work on a BMW 2006 engine 530i model
@edduarte2063 Жыл бұрын
How about window screens. 2 stainless steel and one polymer in the middle rolled up.
@1stdomco10 ай бұрын
How can I hook up a switch to my dash? What wire do I use positive or negative and what then? I made my hho generator. It turned out pretty good. I don't know shit about wiring or electric anything? So I would appreciate any advice. Thanks. Oh yeah do I put my hose into my air intake? I have an 04 Xterra that gets like 12mpg seriously.
@patrickpalacio20472 жыл бұрын
I also have an 04 Xterra I am considering doing the system on as well! Been trying to find a decent guide!
@kryptikhonor2 жыл бұрын
@@kryptikhonor What a wonderful coincidence that you have an 04 Xterra and you are a follower of Yehushua the Messiah
@patrickpalacio20472 жыл бұрын
Can you put more in series so you can drive on only hho gas?
@anxietychannel7 ай бұрын
What size container are you using
@josephpereira3568 Жыл бұрын
Should the sock be 100% cotton or does it matter
@thebustedbolt3044 Жыл бұрын
Overall I like the idea, although there are some issues. Having the anode, and cathode separated by a cloth will cause problems eventually, and you can't you sodium hydroxide which is a better oxidizer for it'll eat through the sock in no time, but I guess it's fine for a demonstration. The surface area becomes huge for sure, so that's pretty cool. But, you say this will improve the efficiency of the fuel. When you are drawing lots of amps from the battery, you are requiring the dynamo to work more in order to replace those missing watts, so you burn more fuel. So my question is, have you actually measured the consumption of fuel? Also, wont this wear out the engine more, even crack it over time?
@JoTheVeteran2 жыл бұрын
From what i've heard the way this process doesn't violate the first rule of thermodynamics is because the hho gas makes the gasoline burn much more efficiently so basically the extra power comes from not wasting the gasoline as much. so far as how it treats the engine i've heard it basically steam cleans the inside of it haha i want to try this stuff out its cheap enough to spend some time on
@MrSchulz7772 жыл бұрын
Yes, idk why everyone is running this on the car battery. I plan to install something similar using a separate battery I will charge overnight.
@spencerjensen51522 жыл бұрын
@@spencerjensen5152 you can always put it on the alternator
@markpolissaint3338 Жыл бұрын
@@markpolissaint3338 No you can't, it will make the engine work harder because it has to power the electrolyser, lowering fuel efficiency.
@spencerjensen5152 Жыл бұрын
@@spencerjensen5152 so how many amps is this guys set up drawing and how many amps does his car alternator produce at normal driving rpms? if you don't know the answer then how can what you claim be correct?
@willg5110 Жыл бұрын
You didn't show how it ran on the hydrogen like you said you would. How has it run on it?
@Sherrie777222 жыл бұрын
So can I just hook it up to the battery?
@AdamEspositoYT5 ай бұрын
I just made it and had a short,,maybe use 2 socks or ya a thicker fluffy sock because once it gets wet the little openings in the sock become larger and touches and shorts,,she's rockin now though, ,,I made it for 4th July balloons possibly, I'll upload a video after all is glued and crap,thanks dude
@jimtom4849 Жыл бұрын
I would like to know how to do a full conversion. Where gasoline becomes obsolete. Can anyone point me in the right direction please.
@LoveWins Жыл бұрын
Great video, how much gas do you save?
@johnpavon799 Жыл бұрын
0. simple thermodynamics. You put energy into water and get h2 and o2, you burn them together and get the same energy back. less than 0 if you consider the wasted heat
@veryInteresting_ Жыл бұрын
I am using Epsom (magnesium) salt instead of backing soda. look at a PWM and an amp meter so you can eyeball everything.. flashback suppressor (Bubbler) you probably have heard it all.
@Energikar2 жыл бұрын
dont use salt or epsom salt. it creates deadly chlorine gas and can kill you.
@cryptoworldgames Жыл бұрын
ya,it turned sock blue
@brucecowles9265 Жыл бұрын
Its supposedly making orgone energy if you get bubbles on top that stay(wthout soap) and dont pop( with time...not with fire,of course)...
@tnunn30233 жыл бұрын
How would that make orgone energy? Orgon generators need organic, inorganic and a crystal that can transmute the energy to orgone/cosmic energy
@jaimebarajas6623 жыл бұрын
Did you run her? How long does the water last?
@cashewABCD3 жыл бұрын
Do you why the fuses keep popping out?
@sonsonateco20103 жыл бұрын
So are we just not gonna ask where the other "lonely sock" to the pair is? If i wasnt almost 100% sure it was used by Rosie palm and the 5 finger quartet? Can it stand on its own now? Is it growing its own ecosystem in a drawer somewhere? So many questions! XD
@weedconnoiseur3 жыл бұрын
As far as I have ever known, it's called a lonely sock for when you get... lonely...
@steffenwolffe5072 жыл бұрын
Any switch that turns something on or off
@patrickpalacio20472 жыл бұрын
Old socks will improve process?
@draganbuhanovich6411 Жыл бұрын
I would like to see the motor running with the HHO cell.
@waynebagnall3611 Жыл бұрын
Not a fuel cell tho,quite the opposite, an electrolysis device. Fuel cells combine hydrogen with oxygen and generate electricity
@eric3skywalker9132 жыл бұрын
this need to be higher up.
@lesto123212 жыл бұрын
You may have detergent residue left in the sock if it is used.
@bugtrap66 Жыл бұрын
True it was the cheapest and the easiest way of making HHO generator..
@IamAli89 Жыл бұрын
You could use a heavier gauge wire.
@JohnDoe-fu4qd10 ай бұрын
Dose he ever answer anyone back I've tried this today with a pikle jar ran it just like he did and the jar got hot I mean it Done what it was supposed to do but I got some questions on this if anyone knows the gut oms hit up and get back to me please
@yashuasaves52072 жыл бұрын
you need a check valve in the lid so it can draw some air
@jimdeyoe34853 жыл бұрын
why does it need air ?
@julien12 жыл бұрын
@@julien1 try it with out you will know why
@jimdeyoe34852 жыл бұрын
@@jimdeyoe3485 do you mean a flashback arrestor no ? - which should be fitted near to where you join from the bubbler to the air intake.
@julien12 жыл бұрын
I made one and it works but the bubbles are co2 so how come yours works with baking soda -_0 im confuses as our setups are similar
@UrbanTardOutdoors Жыл бұрын
You should just have a bubler safety... something like a air-lock with liquid.
@projetchalet Жыл бұрын
Use a fuse. Dont burn your electrics up. He worried about the ignition. Dont put this thing on WITHOUT IN LINE FUSES. Todays car wiring depends on relays instead of heavier wire. You can burn yards of chips and shit out just hooking willy nilly.
@bombasticbuster9340 Жыл бұрын
I did this along time ago,it does make HHO,but you can't run it all the time,it gets really hot,that plastic container is going to melt
@dank6905 Жыл бұрын
Why is it a problem if the electrodes are magnetic?
@MrCamerononicus Жыл бұрын
Dude doing Science: "There's no real Science to it." Lmfao! Phkk Buddy, you're funny. Nice tip, it must come down to 'surface area'. Thanks.
@brianbidiuk31257 ай бұрын
This is not a fuel cell. It is a HhO generator!
@pulkitsharmapremiumvideos92522 жыл бұрын
What are you feeding that why wire connector too?
@mzsinko843 жыл бұрын
Battery.
@Ryan-vb6jb3 жыл бұрын
Briggs 18HP Lawn mower engine ran on water in carb 2008. 6-10amp pulses THROUGH SPARK PLUG from on board ring dual alternator with late ATDC timing, Small Hydrogen formed at plug + water vapor pressure same time. S1R9A9M9 discovered this new process. Self sustained as ignition high volts is by Magneto - not battery coil. Triple hand wound coil forms magnetic field over plug wire extending timeing 0-minus 34 degrees. Accessory spark gap required while EGR of embedded nitrogen compoinnds increases efficiency if used. Battery start, then disconnected. See videos 1+2!
@waterfuel Жыл бұрын
I found that this no longer works using stainless wool. Makers are now using something other than stainless steel. It deteriorated to power within 5 to 10 minutes during electrolysis. At least that's what happened with the wool I used. So don't be surprised if that happens.
@DeepWatersM Жыл бұрын
can u use this system on diesel engines too?
@oliverpazdry1750 Жыл бұрын
No diesel engines work off compression not explosion
@chupacabra4897 Жыл бұрын
how much production would be needed to power an F250 6.7L Diesel?
@pdionne03901 Жыл бұрын
gas and diesels are different , dont run this on a diesel engine
@drowsycannon51793 ай бұрын
@@drowsycannon5179 Don't run your unit or Brown's gas on a Diesel? I know a person who travels the country installing HHO systems on commercial tractor trailer vehicles and they work fine. Fuel economy doubles when using HHO and diesel, but it also has limitations as it works best when on the open road. His system allows the driver to shut the fuel pump OFF and run just on HHO. So, you must be talking about your design.
@pdionne039013 ай бұрын
More horsepower?🤔
@jeffcaga2 жыл бұрын
Cotton or nylon socks
@garybrown97192 жыл бұрын
Why would you want it to produce less??
@Dan0rioN10 ай бұрын
What you need to put on the contaner on the top would be good but sence you dont have room on the top then maybe you can find anther way to have a plow cap maybe have another hoes comeing off it with flip cap on the end of it you want a way place for a flash back to go if you should have one with a flip cap if it was to have a blow back then it would go out the cap without dameging anything ans if you have it set right then the cap would safely let the explotion out then spring back shut and you wouldint even have to worry at all about braking you jar or contaner becues the worst that is going to come out of it is that you will have to make another one good thing they are not hard to make but they work grait i love mine the extra power it gives my jeep is crazy. I would have it in my jeep just for that reson so and the fact of how much i save on fule it is crazy more people dont know about this
@IAm-zk8xj Жыл бұрын
NightHawkInLight ohhhhh
@Shreyam_io2 жыл бұрын
The stock MUST BE POLYESTER COTTON WHEN WET ACTS AS A CONDUCTOR SHORTS SYSTEM OUT WITH FEEDBACK
@hubertslayton896 Жыл бұрын
Use fiberp Glass door screen better results longer life
@hubertslayton896 Жыл бұрын
Basic design same also put In a glass tube fuse in between switch and unit and a bubbler before hose to motor to much chance of water sucking into intake
@hubertslayton896 Жыл бұрын
Other than that system works excellent at 25 amp input built one and put it on my 04 dakota works nice increased mileage especially on anyway
@hubertslayton896 Жыл бұрын
mine turned on as in this video but the cell heats up a lot and I don't know why
The switches act as a fuse only because you melted the contacts in it with too much current draw. For safety add an in-line fuse. Don't rely on the switch failing as your safety
Realy this guy didn't do real effort as to facts It's not acidic because of baking soda Its effect of electrolysis. That potscrubbers is not a winning recipe He mentioned the vessels to be watertight He should inform that it should be gas tight As hydrogen is very much smaller as water As hydrogen can escape through metal vessels Get your facts right This is a basic, not very successful "patent"
@@christohuyserlet's see a video of ur setup Mr smart guy
Many of us would love to see a further video detailing how the Del Sol runs with this Brown's Gas supplementation/technical considerations involved with such a system!!!
Yeah, so would I. My thoughts are it's not producing no where near enough gas to be of any value.
I see that he's following all of the basic shop safety protocols. ;-)
"There's no science to it" Nek minute " theres to much salt in it I think" 🤣 Great video.
This is a very great video especially for the automotive mechanics. I love it.new friend here sending hugs and colors to your channel sir thanks sir
Fantastic. Great thinking - outside the box.
Incredible 👏👏👏
You inspire me, Thanks for always sharing....
You are a madman. I love it.
Great music in the background
Nice video, simple generator with good production. The amount of salt/ baking soda is kind of important. My first prototype was a big glass pickle jar with a metal lid. I added too much salt and melted my wire and the rubber washer going through the lid, it jumped sparked and 💥. Use plastic for sure. Also, you can put the fuel hose way down to the bottom of the container, then flip it upside down. All of the electrical pieces will then be under water.
Especially appreciate your added safety measures. Well Done.
Our plastic bottle is collapsing under the vacuum pressure, help?
Well man its time to change the world you are a direct contribution i promise you. Thank you. Amazing sometimes its hard to not over think things... wow.
It every nice video thanks so much
Here from NightHawkInLight's video. You could make it a lot more efficient by using a DC-DC buck converter to run it at 2-3V instead of the full 12V. The hydrogen production is based on the current, not the voltage, so as long as your cell can pass enough current (add more surface area or baking soda), it'll produce enough hydrogen. For electrolysis to happen you need 1.23V. The rest of the voltage drop is turned into heat. Also, I don't buy the efficiency gains, but I believe burning some hydrogen is good for lowering soot emissions in diesel engines. Maybe it does something for petrol too.
Here from the same- salutes to flame proof beards 💪🎓👍
not a cheap one tho, they can only handle a few amps
Hi Jodie, could you teach me how to make basic setup, you sound really intelligent
You 2-3 volts, what about the amps, how many amps?
@@Gymson dont use salt, it creates chlorine gas
Please make an update video of the del Sol running on HHO
Nice design.
YOUR THE MAN DUDE I GOT some similar stuff and followed your instructions over ALL OTHERS For my very first attempt to produce fuel savings havnt installed or tested in my automobile. However I know alot more about electricity then you do im assuming anyway plus i intertwined the bare wire excessively and spead the wire all the way around almost weaving it into the pot scrubers also I used 10 gauge quality audio wire with short runs and I achieved way way more gas then I expected I am convinced your method is by far superior to all others. I achieved massive production using your method. So thank you my guy for teaching me the most effective and efficient way to achieve ELECTROLYSIS.
What if you used like a silk sock
Have you used it yet? Use a flash back arrester/bubbler
@@Coincidence_Theorist YES I BEEN USING IT although I don't see tons of mpg witch is a bi
This is definitely not the most efficient way & heck the guy even reduced the HHO production intentionally which is a real head scratcher
Well ,how clever can a guy get ? Apparently very clever . When you see all these complicated and expencive set-ups ,this is so refreshing to see .No doubt , i,ll be giving it a try as my Chev. pickup uses way too much gasoline . I,m optimistic this,l work ,we,ll see . But thank you for showing us a better way,keep ,er up .
Love it bro!!!
yeah great job! +1 for your channel^^
AWESOMEEEEEEEE
I enjoyed this video, hard to believe it works
Nice. But your stock Honda battery/alternator setup can't deliver the 1.21 jigawatts the flux capacitor needs.
sweet and cheap and fast. I do t need a shop like all the other methods. Can't wait to try this. c9nsider a water trap inline incase it's pushing water like this example maybe.
I made this for my car, I was very low on gas, I didn’t have gas money but I had this so I used this and I was glad I had made this. I’ve only used this once, I made 3 of these.
Clever! Would I be able to make Hydrogen / oxygen seperator out of this as well? I need to start making pure oxygen for cluster headaches.
What happens when you start driving down the road and this container is bouncing along with the car and the liquid in the container is sloushing around ? Does this cause problems?..I had a really small version of this in the 80s strapped in my Chevy Malibu with a separate safety bottle with water in it as a stop and then also a mesh in-line filter before the intake tap .
Use at least 10 gauge wire. Put a 30 amp fuse/breaker inline. And a 30 amp switch. No more hot wires and burnt out switches. Add a second burp can. From the electrolysis tank, over into and down toward the bottom of an empty canister. From that, the hose is right at the top. Both sealed. From there to your intake.
Or a 30 amp relay with one of the existing switches.
Love this!!! When you make more of them,can you drive 100% on hho and eliminate fuel? What do you think?
Please let us know what the difference is between gas only consumption & gas/hydrogen. Also what problems you had with sensor that monitors the exhaust gas on the exhaust. I have seen others having to install an over riding device to compensate.
Defiantly use a relay and a fuse for the power circuit. Run the gas thru a bubbler for safety and use check valves in the hose going to the engine for backflash suppression. I have run my 99 Ranger on HHO for a couple of years now, giving me dual fuel capability. Running HHO into the engine while using gasoline results in a huge mileage and power increase. My Ranger's 2.5 4 cylinder now runs like it was an old style 302 BOSS V8. My HHO generator is a Dry Cell type (Again for Safety) and is mounted where the air filter used to sit.(I now use a conical Racing cold air intake filter.) A reserve tank of water/soda mixture (2 1/2 gallons) also acts as the bubbler. First time I ran the truck on HHO, it spit out soot for over 20 miles @ 55 MPH, clearing out the carbon buildup. It did eventually rust out the muffler (It was OEM to start with and rust eaten) and I replaced it with the new version of the glass pack Cherry Bomb muffler. Still quiet until you punch it. Then it roars. BTW The engine has 221000 miles on it.On visual inspection of the valves and pistons, very little carbon is there, as of October 2022 when I installed new E3 spark plugs. (8 on this Ford engine)
Doesn't the water rust out internal motor components??
I would like to see your setup.
Like that music ,and whom it was at 60 seconds? Tune while teaching,yeaaaaah😊
Since you're not storing HHO no worries of some big explosion happening, would just pop the container. Can also put a one way check valve on the tube to prevent flashback. Running 100% HHO has no ill effects either on engine, long as its flammable and very burnable and not dirty you are good to go.
Actually, it has ill effects on the engine. Hydrogen makes steel brittle. If you use this long enough, there will be cracks forming at the contact areas, or worse.
@ 🤣🤣🤣 bullshit I have been running my car on it for 8 years.
@ That's not how hydrogen embrittlement works. There are researchers that are still storing hydrogen in the same mild steel tanks captured from the Nazis in world war 2. The tanks are instepcted and pass their tests every year. You need some type of electricity such as arc welding to cause embrittlement. Burning hydrogen in an engine does not cause embrittlement of the engine.
@@swirlingabyssthe HHO DOESNT get stored its burn as it is made by making the air your engine needs a more combustible feed - sheesh these over thinkers are insane. Prolly vaccinated as well.
Yeah this isn’t new stuff I did it during the 80s for the same purposes and it work very well as long as you maintained it ..engine ran smooth and clean Chevy Malibu…lol my mechanics were wondering what the hell lol 😂..it did increase acceleration (little), gas mileage(little )and cleaned the engine with better combustion and less crud ..worked great for me ..planning mounting another on my Chevy truck.
Just use a one-way filter to prevent back-flow blasts.
greetings from Ireland. i drive a 2.2 litre diesel ford transit. your build is the best ive seen yet. very user friendly. Just wondering if i pu the tube in the intake before the turbo. Ive used egr valve cleaner in the air intake just after the air filter. does it go in around there? Thanks for your content.
Run it threw the break booster in most cars
How often do you have to change your caustic mixture?
Might want to use a relay off the ignition to allow the switch that turns this thing on to be activated.
Is it possible to run an engine purely on the H.H.O gas? For instance, start the engine on fuel, activate the H.H.O generator, and have a switch to disconnect your petrol pump? A logical problem for me will be how to control the volume of gas needed going through the gears speeding up and slowing down?
How about during the winter... Will there be issues with the liquid freezing? I live in NH.0
Start it up ! I want to see 🙈 an engine running on hho 😂😂
What happens when you put 10 or 20 of them together for the car engine? Do you still need gasoline?
“Lonely sock” ... that sounded naughty.
Nice manifold.
We're you at man need a follow up is your engine still good I would like to do this but it's the only car I got and you still have to use day in the gas tank right pls hit me up on this
I had a lot of "lonely socks" growing up. But that was different.
Im going to try this. But im going to use a slightly thicker gauge wire.
Using a switch as a fuse is a no-no as they can fuse on. Relays are cheap, use any switch with a relay and the switch will last forever. Relay will last longer too. When people say they wired to ignition source, they're not talking about using ignition power. They're referring to a power source that switches on when they key is in the "on" position. You will have a spare slot in your fuse box for this so it will shut off with the engine.
I knew the guy's origin video. So cool.
This system will work for about 5 minutes...as soon as the copper starts to oxidize it will reduce the out put pretty significantly...stainless steel locking wire works best. Tried using copper once ...( stainless is much more expensive) worked great for 5 minute then hardly worked at all.. Been using it 20 years in my 2002 Jeep GC WJ still works great, with minimal maintenance... One of the keys is not to use to much electrolyte...I use one Tspn of Baking soda, never had an issue.. I pick up around 8 miles to the gallon on the Hywy.. It also cleans out almost 100% of the carbon in the engine.. I'm running 90,000 on the last tune up... the o'l girl runs great, lol Have fun !! it certainly is a process
I have a few questions. I just made mine but I am running too many amps. What are you doing to lower the amp output?
Have you had any problems using a plastic tank?
I love the raw approach to recording this, especially the possibility of it blowing up and dumping water on the old shop floor.
If you stick one of these sock-scrubber electrolizers in a chamber that continuously refilled with water as it was used up in the reaction, such as a toilet tank. And powered it with a relatively cheap continuous source of energy, like a solar panel. You could effectively produce a near endless supply of HHO, right? And incidentally you would also be continuously concentrating Deuterium in the water that remained.
If you use AC instead of DC could it add any benefit? Stanley Meyer used AC for his one. You can play with the hz then, it seems he got good results with several kHz
Oder einen PWM
I have tried to make many of these wet cells and in my experience they always get gunked up in no time even with stainless steel plates & distilled water. They also overheat easily due their poor thermal efficiency. I even had a wet cell explode in my face I believe it was caused by an electrical spark inside of the cell due to a corrosion on a terminal. I didn't get hurt the lid just blew off but It was so loud it damn near blew my eardrums. I have never had any of these issues with dry cells.
I did the same thing and the water mixture inside the jar becomes super warm, is this normal? Do you get the same issue?
I used that same container mounting a hho generator on my golf sport wagon and that seal didn't work well after it gets wet it doesn't seal so I had to find a different container next one melted so now I'm searching for another container that will hold up to the heat that the hho generator produces.
Will this work on a BMW 2006 engine 530i model
How about window screens. 2 stainless steel and one polymer in the middle rolled up.
How can I hook up a switch to my dash? What wire do I use positive or negative and what then? I made my hho generator. It turned out pretty good. I don't know shit about wiring or electric anything? So I would appreciate any advice. Thanks. Oh yeah do I put my hose into my air intake? I have an 04 Xterra that gets like 12mpg seriously.
I also have an 04 Xterra I am considering doing the system on as well! Been trying to find a decent guide!
@@kryptikhonor What a wonderful coincidence that you have an 04 Xterra and you are a follower of Yehushua the Messiah
Can you put more in series so you can drive on only hho gas?
What size container are you using
Should the sock be 100% cotton or does it matter
Overall I like the idea, although there are some issues. Having the anode, and cathode separated by a cloth will cause problems eventually, and you can't you sodium hydroxide which is a better oxidizer for it'll eat through the sock in no time, but I guess it's fine for a demonstration. The surface area becomes huge for sure, so that's pretty cool. But, you say this will improve the efficiency of the fuel. When you are drawing lots of amps from the battery, you are requiring the dynamo to work more in order to replace those missing watts, so you burn more fuel. So my question is, have you actually measured the consumption of fuel? Also, wont this wear out the engine more, even crack it over time?
From what i've heard the way this process doesn't violate the first rule of thermodynamics is because the hho gas makes the gasoline burn much more efficiently so basically the extra power comes from not wasting the gasoline as much. so far as how it treats the engine i've heard it basically steam cleans the inside of it haha i want to try this stuff out its cheap enough to spend some time on
Yes, idk why everyone is running this on the car battery. I plan to install something similar using a separate battery I will charge overnight.
@@spencerjensen5152 you can always put it on the alternator
@@markpolissaint3338 No you can't, it will make the engine work harder because it has to power the electrolyser, lowering fuel efficiency.
@@spencerjensen5152 so how many amps is this guys set up drawing and how many amps does his car alternator produce at normal driving rpms? if you don't know the answer then how can what you claim be correct?
You didn't show how it ran on the hydrogen like you said you would. How has it run on it?
So can I just hook it up to the battery?
I just made it and had a short,,maybe use 2 socks or ya a thicker fluffy sock because once it gets wet the little openings in the sock become larger and touches and shorts,,she's rockin now though, ,,I made it for 4th July balloons possibly, I'll upload a video after all is glued and crap,thanks dude
I would like to know how to do a full conversion. Where gasoline becomes obsolete. Can anyone point me in the right direction please.
Great video, how much gas do you save?
0. simple thermodynamics. You put energy into water and get h2 and o2, you burn them together and get the same energy back. less than 0 if you consider the wasted heat
I am using Epsom (magnesium) salt instead of backing soda. look at a PWM and an amp meter so you can eyeball everything.. flashback suppressor (Bubbler) you probably have heard it all.
dont use salt or epsom salt. it creates deadly chlorine gas and can kill you.
ya,it turned sock blue
Its supposedly making orgone energy if you get bubbles on top that stay(wthout soap) and dont pop( with time...not with fire,of course)...
How would that make orgone energy? Orgon generators need organic, inorganic and a crystal that can transmute the energy to orgone/cosmic energy
Did you run her? How long does the water last?
Do you why the fuses keep popping out?
So are we just not gonna ask where the other "lonely sock" to the pair is? If i wasnt almost 100% sure it was used by Rosie palm and the 5 finger quartet? Can it stand on its own now? Is it growing its own ecosystem in a drawer somewhere? So many questions! XD
As far as I have ever known, it's called a lonely sock for when you get... lonely...
Any switch that turns something on or off
Old socks will improve process?
I would like to see the motor running with the HHO cell.
Not a fuel cell tho,quite the opposite, an electrolysis device. Fuel cells combine hydrogen with oxygen and generate electricity
this need to be higher up.
You may have detergent residue left in the sock if it is used.
True it was the cheapest and the easiest way of making HHO generator..
You could use a heavier gauge wire.
Dose he ever answer anyone back I've tried this today with a pikle jar ran it just like he did and the jar got hot I mean it Done what it was supposed to do but I got some questions on this if anyone knows the gut oms hit up and get back to me please
you need a check valve in the lid so it can draw some air
why does it need air ?
@@julien1 try it with out you will know why
@@jimdeyoe3485 do you mean a flashback arrestor no ? - which should be fitted near to where you join from the bubbler to the air intake.
I made one and it works but the bubbles are co2 so how come yours works with baking soda -_0 im confuses as our setups are similar
You should just have a bubler safety... something like a air-lock with liquid.
Use a fuse. Dont burn your electrics up. He worried about the ignition. Dont put this thing on WITHOUT IN LINE FUSES. Todays car wiring depends on relays instead of heavier wire. You can burn yards of chips and shit out just hooking willy nilly.
I did this along time ago,it does make HHO,but you can't run it all the time,it gets really hot,that plastic container is going to melt
Why is it a problem if the electrodes are magnetic?
Dude doing Science: "There's no real Science to it." Lmfao! Phkk Buddy, you're funny. Nice tip, it must come down to 'surface area'. Thanks.
This is not a fuel cell. It is a HhO generator!
What are you feeding that why wire connector too?
Battery.
Briggs 18HP Lawn mower engine ran on water in carb 2008. 6-10amp pulses THROUGH SPARK PLUG from on board ring dual alternator with late ATDC timing, Small Hydrogen formed at plug + water vapor pressure same time. S1R9A9M9 discovered this new process. Self sustained as ignition high volts is by Magneto - not battery coil. Triple hand wound coil forms magnetic field over plug wire extending timeing 0-minus 34 degrees. Accessory spark gap required while EGR of embedded nitrogen compoinnds increases efficiency if used. Battery start, then disconnected. See videos 1+2!
I found that this no longer works using stainless wool. Makers are now using something other than stainless steel. It deteriorated to power within 5 to 10 minutes during electrolysis. At least that's what happened with the wool I used. So don't be surprised if that happens.
can u use this system on diesel engines too?
No diesel engines work off compression not explosion
how much production would be needed to power an F250 6.7L Diesel?
gas and diesels are different , dont run this on a diesel engine
@@drowsycannon5179 Don't run your unit or Brown's gas on a Diesel? I know a person who travels the country installing HHO systems on commercial tractor trailer vehicles and they work fine. Fuel economy doubles when using HHO and diesel, but it also has limitations as it works best when on the open road. His system allows the driver to shut the fuel pump OFF and run just on HHO. So, you must be talking about your design.
More horsepower?🤔
Cotton or nylon socks
Why would you want it to produce less??
What you need to put on the contaner on the top would be good but sence you dont have room on the top then maybe you can find anther way to have a plow cap maybe have another hoes comeing off it with flip cap on the end of it you want a way place for a flash back to go if you should have one with a flip cap if it was to have a blow back then it would go out the cap without dameging anything ans if you have it set right then the cap would safely let the explotion out then spring back shut and you wouldint even have to worry at all about braking you jar or contaner becues the worst that is going to come out of it is that you will have to make another one good thing they are not hard to make but they work grait i love mine the extra power it gives my jeep is crazy. I would have it in my jeep just for that reson so and the fact of how much i save on fule it is crazy more people dont know about this
NightHawkInLight ohhhhh
The stock MUST BE POLYESTER COTTON WHEN WET ACTS AS A CONDUCTOR SHORTS SYSTEM OUT WITH FEEDBACK
Use fiberp Glass door screen better results longer life
Basic design same also put In a glass tube fuse in between switch and unit and a bubbler before hose to motor to much chance of water sucking into intake
Other than that system works excellent at 25 amp input built one and put it on my 04 dakota works nice increased mileage especially on anyway
mine turned on as in this video but the cell heats up a lot and I don't know why