BEST Magsafe Car Charger? | Testing Out 10 Magnetic Car Mounts/Chargers on the iPhone!
If you're looking for a magsafe/magnetic car charger than check out my review on 10 magnetic car chargers that I tested out. In this review, I go over the magnetic strength of each charger as well as the charging performance and towards the end of the review I talk about the pros and cons and let you know which one I think is the BEST magsafe/magnetic car charger to get!
If you like this video hit that like button and subscribe to the channel for more content on iPhone acccessories!
#magsafe #magsafecharger #anker #otterbox #belkin #pitaka #spigen #carcharger #iphone #iphone15
Magnetic Car Chargers in this Review:
ESR 15 W Cryoboost Magsafe Car Charger:
Amazon Link - amzn.to/3Ep5UEt
ESR 7.5 W Halolock Cryoboost Car Charger:
Amazon Link - amzn.to/3sEOPnv
Anker Mag Go Car Charger:
Amazon Link - amzn.to/47V5X8N
Pitaka MagEZ Car Charger (Vent):
Amazon Link - amzn.to/45DLp2M
Pitaka MagEZ Car Charger (Suction Mount):
Amazon Link - amzn.to/45VKSZN
Otterbox 7.5 W Magsafe Car Charger (Vent):
Amazon Link - amzn.to/3P2OBOy
Otterbox 7.5 W Magsafe Car Charger (Suction Mount):
Amazon Link - amzn.to/3Z25DRo
Peak Design Car Charger:
Amazon Link - amzn.to/3PomQBc
Belkin BoostCharge Pro Magnetic Car Charger:
Amazon Link - amzn.to/45OJpEU
Spigen Mag Fit Holder for Apple Magsafe Charger:
Amazon Link - amzn.to/3P6vOli
3-1 Magnetic Car Charger:
Amazon Link - amzn.to/3P2mm2r
Generic 15W Car Charger:
pickyourplum.com/products/15w...
Chapters:
00:00 - Lead
00:22 - Intro
01:28 - Magnetic Strength of Chargers
02:19 - Charging Performance
03:48 - Pros/Cons of Chargers
06:32 - Conclusion/ Best Charger?
Thank you, great review loved, the details.
Surprisingly helpful and fair review, thanks
Very concise, thanks
You definitely deserves more views likes and subs. Real genuine testing and most importantly accurate. I do a lot of off road lease road driving and was looking for something that would have a strong magnetic hold for those bumpy roads and you did a very good job breaking the magnetic strength down for those looking specifically for that thank you 🙏🏼
Thanks, glad you enjoyed the video!
@@T3CHUP quick question would you happen to know what size ball mount fits the ESR cryoboost 7.5? I drive a semi truck with a big dash and would like some type of adhesive connector instead of the vent mount.
@@krypto360 from the looks of it the ball size mount on the esr halolock charger is 17mm on ESRs website. Hope that helps!
@T3CHUP have you tried any CD mounts?
Great video but…Peak Design DOES offer a vent mount and it is so very good. Different from what I’ve seen before but very good just like the dash mount version. Made from solid billet machines aluminum and just feels like a quality piece of kit. Big plus is that it doesn’t block the vent flow.
Hey, my iPhone 12 Pro heats up BAD on a vent mount in the winter with the heat blowing on it. I need a CD slot mount with magsafe charging built-in, but can't find one. I don't want one w/out charging, and have to plug my phone in with a cable. That's the whole point of magsafe/fast charging. Any ideas? Thanks, Tony.
I have been using several of the XVIDA magnetic car and home chargers for about three [3] years now for our iPhone 12 Pro's. The entry costs for XVIDA were high and they required the use of their propriety phone cases. The magnetic hold was only fair and a light bump of the phone easily lands the phone at my feet or under the pedals out of reach [very annoying]. And now the wear and tear is showing on the USB connection on the chargers itself causing an intermittent connection. One of them simply won't stay connected even with a new USB cable. So now in the market to replace all the XVIDA chargers [4 home base chargers and 3 auto chargers]. Also means the 2 XVIDA phone cases have to go too. Your reviews are very helpful, but I like to use phone cases to help protect our investment in the iPhones. As we have no need to replace the 12 Pros we have now [at least for the immediate predictable future], I'm starting the research for compatible cases that will work with the chargers you've reviewed. It seems many of not all the cases have some sort of thought into maintaining or improving the magnetic hold [verses the XVIDA I have now]. Do you have any thoughts on how the cases affect the magnetic hold, and any recommendations on those? I'm not really too concerned about the wattage or charging times as most our vehicle journeys are at least 30 minutes or greater. I'd rather have better vent mounted phone, with the magnetic hold capacities with a compatible phone case. Thank you for your thoughts on this.
Looks like ESR is the go for me. The summer heat here means my phone often shuts down if I try and charge it even with a cable so I need the cooling tech to be able to run my business on the go. Thanks for the review!
FYI Peak Design does offer a vent mount option as well.
And also a generic 1" ball version that you can use your own mount.
I've been using scosche magic mount for years, at the expense of not using the wireless charge feature of my phone(s). I would like to make a change. Thank you for doing this comparison for me! I haven't finished the video yet, but my first observation is that Scosche isn't in the list. They make this tech too I think - Maybe you'll address it. Thanks again
you need to do the same test with a case on the phone.
Yes a case will play a significant role in offering better magnetic strength but I didnt perform these tests with a case on my iphone because I wanted to show how each charger performs with its strength and show the difference between the chargers.
Then you’d have to use the same case for all tests. So unless the viewer has that same case it would be meaningless.
@@T3CHUPProblem is … do not know anybody using a bare phone without case. But that indeed alters outcome and pretty much most have different cases.
@@GanymedeXD yup, it sure does. I understand I totally get why people mentioned why I didn’t test it with a case cause everyone usually has a case on their iPhone. However, down the road when I drop another video on some newer car chargers I’ll probably use a iphone case with the standard strength you would find on most common iPhone brand cases out there. 👍
esr mount are great keep my charge and cool but is so shaky. ESR customer service is great too i told them about my issue they sended me a replacement but it had same problem. I am only talking about 7.5w cryoboost charger.
Hmmm…I haven’t experienced that for their 15W car charger. Maybe with time that may happen to the 7.5W charger? 🤷♂️
I have their desk charger with the watch and AirPods, and after a few months that fan starts to whine in the most annoying way
@@michaelwiley6979 haha not going to lie I agree! The first month I was able to stand it but a few months after I’ve started turning it off cause I got annoyed of it 😂
Is the three in one mount brand spelled Qicoco? I can't find one.
Yup, that’s the one.
Quad lock is the way guys!!!
How about iottie velox pro?
Not included as you can see!
What about iottie velox?
You watched the clip … not included!
Are you getting any of these magnetic/magsafe chargers?
Not for $100 dollars
My ESR Magsafe breaks at the clip after 9 months and it's irreparable .Sad as its magnet was strong , charging speed was good
Yeah the clips on the ESR charger and most of these car chargers can have the tendency to do that. However, if I were you I would reach out to ESR and try to see if they can help even after 9 months of using it and ask them if they could replace it. One of my friends had a similar issue with his an they were happy to help him out by sending him a replacement. They have a 12 month warranty last time I checked and their customer service is one of the best out there in the realm of iPhone accessories from what I’ve heard from people.
@@T3CHUP I've found a better solution. I bought a universal vent clip with 17mm ballhead for USD 1.5. and replaced the broken ESR clip. Stable like crazy. Seems better than the default ESR clip.
ESR 15W is the BEST Charger
The 15W third party iPhone wireless MagSafe and wireless non-MagSafe chargers only charge iPhones at 7.5W
More cooler?
Using full sentences helps communicating! What is that supposed to mean?
Good video overall, however not enough detail shown about the three and one car charger and the video was way too dark to tell anything about it
Dark? Check your hardware. Perfectly fine!
Hardware is perfectly fine as rest of video is perfectly fine, as well as every other video I’ve ever watched. The portion showing the 3-in-1 charger is too dark. 🤷♂️
So you tested with just a bare phone? How about real world and at least put a protector on the phone?
That leads to nonsense results. Hundreds of cases … everybody has different ones … hence bare phone the only representative choice.
Suction Mounts are TRASH, and the Car-Vent mounts CAN and WILL break your Vent if you run over a pothole while the phone is charging. NOT worth the risk. 3M adhesive that are specific for car-mount are made for dash use and I have NEVER had one come off. I live in a VERY HOT place.
I have … in 25 years … never had a mount damage my vents! And we got shitloads of potholes! Major downside … most were pretty flimsy and wobbly … at some point falling off. Suction sucks … but not on a dash. The adhesive ones do easily come off in the heat. The oldschool … brutally screwing them onto the dash … were the only stable ones. Not happy with😅😅 any!
ESR . Look no further