KZhead
Ғылым және технология

Foldable Tiger tank early/131, Version 2 print on Crealitys

FAB365 3D Printing
2023 ж. 26 Шіл.
163 226 Рет қаралды
Жүктеу

STL- fab365.net/items/426
The first folding tank I designed, the Tiger, was a huge hit. However, it was the first time I made a tank with a folding design, so there was a bit of a disappointment. However, while designing several tanks, these parts were improved, and as a result, new tanks made with the improved design also gained popularity.
Numerous customers who have seen this have requested that the improvements be applied to the Tiger tank, the first folding tank, to be remade. In order to respond to that request, we have now created the Tiger tank version 2.0.
And this Foldable Tiger 2.0 version refers to Tiger 131, one of the previous models.
The difference between the previous Tiger tank version 2.0 and the previous version 1.0 is as follows.
1. The structure of the track has been changed to improve the design in a form much closer to reality. Compared to the previous 1.0 version, you will feel the huge difference.
2. I changed the way to print and fit the wheels separately. The wheel of version 1.0 had the advantage of being easy to print at once, but the shape was very different from the actual one. However, this time by allowing the wheels to be printed separately, it has been improved to be much more realistic.
3. A cleaner result can be obtained after completion by removing the front living hinge.
4. Improved to print and attach pipes/hoses separately on the back. These parts partially cover the parting lines, so a more complete result can be obtained.
I received a great response from the makers with my foldable design, so I was able to continuously develop foldable design techniques. So things that seemed impossible at first are now possible little by little, and 3D printing seems to be getting more fun and fun. According to your continuous response, I will make a better design and will not stay at version 2.0, but will develop to 3.0, 4.0, etc.
Thank you~
Please enjoy~
1 : 48 scale
Largest part in printing, size = X 129mm, Y 177mm, Z 111mm, After full assembly size= X 83mm, Y 185mm, Z 64mm
Total Build Time : 42h 31m / Plastic Weight : 168.9g
#fab365 #3dprinting #tigertank #tamiya #worldwar2 #3dprinted

Пікірлер

  • I can’t believe my luck, I just bought the old design for the Tiger and then the new version released hours later. Oh well, that’s life.

    @DeltaXK144@DeltaXK1449 ай бұрын

    • War thunder taught me one thing "skill issue"

      @gianniskikas9428@gianniskikas94289 ай бұрын

    • damn lmao

      @flack2998@flack29989 ай бұрын

    • That's a way of joy isn't it?

      @PianoMadura@PianoMadura8 ай бұрын

    • Acceptance.

      @shlomoshekelstein372@shlomoshekelstein3727 ай бұрын

    • Rip bro

      @juztnotbob@juztnotbob6 ай бұрын

  • Your design skills are unbelievable! Absolutely stunning work!

    @WilSisney@WilSisney9 ай бұрын

    • Thank you very much! Please enjoy~

      @fab365_official@fab365_official9 ай бұрын

  • amazing, it looks awesome. but i wonder. have you consider making the last pair of wheels attached to an axel so you can put a screw and add a little pressure to tension the caterpillar?

    @lordscan1047@lordscan10479 ай бұрын

  • I had no idea abs/pla printers had developed to the point where snap-fit stuff was possible without serious risk of the tabs snapping away when the required force was applied.

    @benjaminstorace6699@benjaminstorace66998 ай бұрын

    • It's still very possible to break the tabs if you're not patient/go to hard/don't have your printer and temps tuned properly. What was the last printer of that type that you've used?

      @Sean_735@Sean_7358 ай бұрын

    • @@Sean_735 I haven't. I've just been a casual observer of 3d printing tech's advancement, though part of that observation was of an older abs printer my dad tried to get working, and sometimes even did get working, but was generally an absolute pain with very thick layer lines.

      @benjaminstorace6699@benjaminstorace66997 ай бұрын

  • Ich finde deine Videos/Modelle immer wieder Faszinierend. Würde gerne einen haben. Mit Farbe versehen, sehen die noch besser aus!

    @swenbautz2566@swenbautz25669 ай бұрын

  • Finally a new tiger tank video! a big top no. 1 favorite tank!!

    @bobloccgemingchanil@bobloccgemingchanil9 ай бұрын

    • This is version 2.0. Please enjoy~

      @fab365_official@fab365_official9 ай бұрын

    • @@fab365_official looks so detailed and better than the old ones

      @bobloccgemingchanil@bobloccgemingchanil9 ай бұрын

  • Looks very Nice 👍

    @-TIGER_131-@-TIGER_131-9 ай бұрын

    • Thank you 👍 Please enjoy~

      @fab365_official@fab365_official9 ай бұрын

  • 7:01 aaaaaaaaaw look at them they look like siblings small tiny little things very cool man

    @thebeginnerdude7860@thebeginnerdude78608 ай бұрын

  • Very good enjoyed it a lot.

    @steve1315@steve13159 ай бұрын

    • Thanks for enjoying video.

      @fab365_official@fab365_official9 ай бұрын

  • I waiting all my life... Thank you

    @jb2236@jb22369 ай бұрын

    • You are welcome! Please enjoy~

      @fab365_official@fab365_official9 ай бұрын

  • The Tiger Tank looks absolutely beautiful and your skill is also excellent. Can you print 1/6 scale rifles or weapon?

    @user-bk5kw5zb9t@user-bk5kw5zb9t9 ай бұрын

    • Could you ask or vote on my request page please? fab365.net/requests Thank you~

      @fab365_official@fab365_official9 ай бұрын

  • Is there any details on the inside? For me that's the best part of the model

    @mikejungferman4744@mikejungferman47448 ай бұрын

  • Beautiful ❤❤❤

    @Windows7_10@Windows7_107 ай бұрын

    • Thanks for watching and comment~

      @fab365_official@fab365_official7 ай бұрын

  • This is a nice tiger H1 model the reason I say H1 instead of the name tiger is because the H1 is a version of the tiger an early version with a water cooled engine the tiger we often see is a tiger 1E a late war version which engine is not water cooled

    @ryleeculla5570@ryleeculla55708 ай бұрын

  • Another build added to my list!

    @distractedgeek@distractedgeek9 ай бұрын

    • Thanks for watching! Please print and enjoy~

      @fab365_official@fab365_official9 ай бұрын

  • Bro I swear these people that don’t cut their nails

    @SomeGuy176@SomeGuy1768 ай бұрын

  • What is that flexible layer you are using? I have the one from creality but things don't pop off that easily!!!!!

    @craigcooknf@craigcooknf9 ай бұрын

    • Please check this ink. www.shop.fab365.net/energetic

      @fab365_official@fab365_official8 ай бұрын

    • Little trick let the base go cold

      @RcNerd@RcNerd8 ай бұрын

  • The old one looks arguably better in my opinion

    @FoxFrostXPINC@FoxFrostXPINC9 ай бұрын

    • The old one is also a design I worked hard on. In particular, the old one made earlier has the advantage of being simpler and easier to make.

      @fab365_official@fab365_official9 ай бұрын

    • @@fab365_official alright

      @FoxFrostXPINC@FoxFrostXPINC8 ай бұрын

    • @@fab365_officialwould it be possible to add suspension?

      @FoxFrostXPINC@FoxFrostXPINC8 ай бұрын

  • Excellent

    @nikkicork8815@nikkicork88159 ай бұрын

    • Thanks for watching! Please enjoy!

      @fab365_official@fab365_official9 ай бұрын

  • Grey - 6/10 Brown - 8/10 👍🏻🎅👍🏻

    @PhD777@PhD7778 ай бұрын

  • What kind of glue is that being used?

    @nater456789@nater4567899 ай бұрын

  • excellent models, are they for sale?

    @franciscocarrillo8195@franciscocarrillo81959 ай бұрын

  • That is KILLER KOOL!!!....is it like 1:35 scale? I'd have to reduce to 1:48 scale, as i like to build in O gauge for 28mm figs

    @roadskare63@roadskare638 ай бұрын

    • If you print at a reduced scale, the gap between the parts will be reduced, so there is a risk that they will not move and stick together.

      @fab365_official@fab365_official8 ай бұрын

    • is cool, i am a miniature builder for the game table, not all gamers need a mini to roll or be able to fold out( that fold out/up thingy IS genius tho bro!!!)@@fab365_official

      @roadskare63@roadskare638 ай бұрын

  • My wheels can move around and will fall of with a slight bit of force

    @RawGoon@RawGoon7 ай бұрын

  • Excente diseño, pero las orugas las veo muy gruesa, queda fuera de escala.

    @rickyarg5298@rickyarg52989 ай бұрын

  • Very nice and detailed Tiger tank. There is only one issue. The runninggear is not correct. Please check some literature or footage. My english isn't good enough to explain it.

    @udorechner6846@udorechner68469 ай бұрын

    • I know this tank is a bit different from the real thing. Due to limitations in the nozzle size (0.4mm) and layer thickness of desktop 3D printers, it is not possible to express them in great detail. Moreover, in order to make the track roll as the wheel rotates despite these limitations, some deformation was necessary.

      @fab365_official@fab365_official9 ай бұрын

    • @@fab365_official Overall it is a very nice and good looking tankmodel!. 😃

      @udorechner6846@udorechner68469 ай бұрын

  • Awesome . I want to print

    @SCHRUBBE1966@SCHRUBBE196615 күн бұрын

    • Thanks~ Print and enjoy~

      @fab365_official@fab365_official14 күн бұрын

  • The tracks are hugely oversized but the chassis and turret look great, I want one ☝️

    @corsair371@corsair3718 ай бұрын

    • This is tiger 131 it was used in the desert so the mounted bigger tracks

      @dinoman2545@dinoman25457 ай бұрын

    • @@dinoman2545 You're kidding, right? Those tracks are ridiculously out of proportion compared to actual Tiger tracks; even if you count the wider tracks they don't look at all like these. In fact, the running gear is pretty much not accurate at all. Road wheels are paired, not single thick wheels and there is an inner, center, and outer set not two sets each side. If these are meant as toys that is one thing but they are not accurate depictions of any version of the Tiger I. Seriously, where are those idlers from?

      @wwiiinplastic4712@wwiiinplastic47127 ай бұрын

  • Tiger 2/King tiger next?

    @user-xb8vy2fq8f@user-xb8vy2fq8f7 ай бұрын

    • Could you ask or vote on my request page please? fab365.net/requests Thank you~

      @fab365_official@fab365_official7 ай бұрын

  • Very good model and what is the scale ???

    @jguydanis@jguydanis9 ай бұрын

    • 1 : 48 scale

      @fab365_official@fab365_official9 ай бұрын

  • Do you think you can give me the parameters of everything, it just doesn't work for me :(

    @ABF7689@ABF76894 ай бұрын

  • 💕👍

    @makewithmegma@makewithmegma9 ай бұрын

  • holy Tiger！

    @tonbopro@tonbopro9 ай бұрын

    • Please enjoy~

      @fab365_official@fab365_official9 ай бұрын

  • What 3D printer are you using?

    @mikeypeters7003@mikeypeters70037 ай бұрын

    • Creality 3D printers, like Ender 3 pro, Ender 3 S1, CR10s pro.

      @fab365_official@fab365_official7 ай бұрын

    • @@fab365_official amazing work. I want to get into 3D printing, but scared of what to buy and the process. Will look at the printers and see if I can find any associated tutorials. Thank you.

      @mikeypeters7003@mikeypeters70037 ай бұрын

  • i like tanks

    @JesreelBernales-nu2ec@JesreelBernales-nu2ec6 ай бұрын

    • Me too. Thanks for watching~

      @fab365_official@fab365_official5 ай бұрын

    • no problem

      @JesreelBernales-nu2ec@JesreelBernales-nu2ec5 ай бұрын

  • wow

    @helenarammerstorfer3686@helenarammerstorfer36867 ай бұрын

    • Thanks for watching~ Please enjoy!

      @fab365_official@fab365_official7 ай бұрын

  • Танк огонь.

    @user-xy9ph8md3w@user-xy9ph8md3w5 ай бұрын

  • Nice, but I preffer traditional model building

    @ET42Driver@ET42Driver8 ай бұрын

  • I need 1

    @TonnDaniel@TonnDaniel6 ай бұрын

  • Гусли сильно провисают одно звено убрать думаю?

    @user-fo3sc4ex8p@user-fo3sc4ex8p8 ай бұрын

  • Now make kv 1 and kv 2

    @theronker22@theronker229 ай бұрын

    • Could you ask or vote on my request page please? fab365.net/requests Thank you~

      @fab365_official@fab365_official9 ай бұрын

  • 필라 어디꺼 무슨색이에요?

    @circuitwalker2886@circuitwalker28869 ай бұрын

    • Paramount 3D, Military Khaki, PLA 입니다~

      @fab365_official@fab365_official9 ай бұрын

  • How I Can Rescale To 1/56?

    @RfrSSWolf@RfrSSWolf9 ай бұрын

    • I don't recommend print scale down.

      @fab365_official@fab365_official9 ай бұрын

    • @@fab365_official Why?

      @RfrSSWolf@RfrSSWolf9 ай бұрын

  • Tiger 131 1/24

    @harurhaisinger@harurhaisinger8 ай бұрын

  • Tank tiger 1

    @vitalikvolianskiy2563@vitalikvolianskiy25638 ай бұрын

  • so tell me why my hand moved the mouse towards this video automatically.

    @Seal423@Seal4235 ай бұрын

  • what scale is this please 1/35 ?

    @petethescalemodeller6130@petethescalemodeller61304 ай бұрын

    • The scale is written at the bottom of the description. Please confirm. Thank you~

      @fab365_official@fab365_official3 ай бұрын

    • @@fab365_official thanks

      @petethescalemodeller6130@petethescalemodeller61303 ай бұрын

  • Тигр 131

    @user-sv8sd1lt2o@user-sv8sd1lt2o9 ай бұрын

    • Yes. Please enjoy!

      @fab365_official@fab365_official9 ай бұрын

  • Α Canadair CL 215 Firefighting plane would be much appreciated worldwide...

    @stelios-petroshalas2482@stelios-petroshalas24829 ай бұрын

  • Tracks are not the correct pattern.

    @sasha5320@sasha53208 ай бұрын

  • Why not make it accurate though? If you're gonna glue stuff to it I mean.

    @AdamMann3D@AdamMann3D9 ай бұрын

    • I think that the selling point of this tank is it's easy assembly (maybe for wargaming or a durable desktop model). It's never going to compete with something like the detailed 1/48 scale Tamiya Tiger 1.

      @joeshmoe9978@joeshmoe99789 ай бұрын

  • Paint them

    @Breas1014@Breas10146 ай бұрын

    • I'm really bad at painting.

      @fab365_official@fab365_official6 ай бұрын

  • Nani

    @theronker22@theronker229 ай бұрын

  • It is nice, but not authentic.

    @makettezzunk@makettezzunk9 ай бұрын

  • Fast model,but details nogo and not real!

    @downhillfan8331@downhillfan83318 ай бұрын

  • 🙄🙄🤦‍♂🤦‍♂🤦‍♂🤦‍♂

    @pietjepuk9575@pietjepuk95757 ай бұрын

    • 😁😁😁

      @fab365_official@fab365_official7 ай бұрын

  • Looks like a simple toy, and not a model of a Tiger tank. Also, do something with those fingernails would ya.

    @paulsmodels@paulsmodels8 ай бұрын

  • How do you get that detail with fdm ?

    @RcNerd@RcNerd8 ай бұрын

    • Because I understand FDM 3D printers well and designed them accordingly. Please enjoy~

      @fab365_official@fab365_official7 ай бұрын

  • Only scale 1:48 or possible scale 1:35? How much is it?

    @stevesmith2718@stevesmith27189 ай бұрын

    • You can print larger. Bigger is better!!! But I don't recommend print smaller. Please enjoy~

      @fab365_official@fab365_official9 ай бұрын

  • фуфло!

    @maxmamuth5599@maxmamuth55998 ай бұрын
KZhead