How to Replace a Flex Disc Mersedes w210

2019 ж. 4 Мау.
51 863 Рет қаралды

To remove the cardan mersedes you need to remove the defender, then unscrew the cardan bolts on the back of where the gearbox. Next, unwind the bolts suspension podshybnika. Remove the gimbal. Thus, we are changing the hanging base sheet. Then unwind the front coupling cardan. change it and assemble in the reverse order. Now the most important thing is to collect the gimbal mark. On the cardan there are arrows, one on the front of the cardan and two on the back of the cardan. We set these tags as shown in the video. One arrow should be in the middle of two arrows on the other part of the propeller shaft. That's all the guys.
PUT YOUR LAKES AND SUBSCRIBE TO THE CHANNEL.
** If the video was helpful, put a "thumbs up" and subscribe . **
→ Become a Auto Serice Subscriber: / @autoservice.
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week*
Disclaimer:
Due to factors beyond the control of Auto Service , I cannot guarantee against improper use or unauthorized modifications of this information. Auto Service assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Auto Service recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Auto Service, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Auto Service.
We offer Comprehensive Vehicle Reports at competitive rates
bit.ly/3zKNkWn
Is $34.99 too much to pay Carfax for a vehicle history report? Our customers think so. Sell VIN history reports for $9.99 each. Approved first-level government data provider.
bit.ly/3OlDUFn
Gov-Auctions.org - #1 Government & Seized Auto Auctions. Cars 95% Off!
bit.ly/3O7G9vB
eBooks - Ford Shop Manuals and Service Manuals
bit.ly/3zHK5iq
Mountain Directory: A Guide for Truckers, RV and Motorhome Drivers
bit.ly/3bbmcpk
RepairSurge Online Auto Repair Manuals
bit.ly/39DrlpG

Пікірлер
  • So much for the balancing of the prop shaft

    @arminprnjavorac2084@arminprnjavorac20844 ай бұрын
    • Yes

      @autoservice.@autoservice.3 ай бұрын
  • Informative video 👍

    @firdausravindar977@firdausravindar977 Жыл бұрын
    • Thanks

      @autoservice.@autoservice. Жыл бұрын
    • @@autoservice. 4matic?

      @user-iy6jq5lz7c@user-iy6jq5lz7c Жыл бұрын
    • @@user-iy6jq5lz7c e 200 1998

      @autoservice.@autoservice. Жыл бұрын
  • 😊👍👍👍

    @aqniyapashayeva1572@aqniyapashayeva1572 Жыл бұрын
  • hello I have a mercedes 180c w202 if I accelerate a lot, it will bump a bit when driving, it is no longer gears well, it is the hardy disck thanks greetings fernando Sout spain

    @fernandogonzalezruiz6199@fernandogonzalezruiz61993 жыл бұрын
    • @@autoservice. is dat alles ?

      @fernandogonzalezruiz6199@fernandogonzalezruiz61993 жыл бұрын
  • Changed the flex disk back and front, center bearing is ok, still having vibration over 80km/h, what it can be ? I can feel the whole car slightly vibrating. W210 1996 2.0 manual, thanks

    @sergiuioan6180@sergiuioan61802 жыл бұрын
    • maybe it's engine mounts. or the labels were not correctly placed.

      @autoservice.@autoservice.2 жыл бұрын
    • @@autoservice. labels ? What do you mean? Thanks

      @sergiuioan6180@sergiuioan61802 жыл бұрын
    • @@sergiuioan6180 there are marks on the shaft, if they are incorrectly put, then there will be vibrations.

      @autoservice.@autoservice.2 жыл бұрын
    • @@sergiuioan6180 yes, definitely possible the engine & transmission mounts or the shaft being reinstalled incorrectly. Also, I forget their proper name, but there's bushings/seals at the flanges on the transmission output shaft as well as the rear differential where the driveshaft connects. Those bushings/seals need to be greased during reinstallation of the driveshaft. They could also be worn

      @RothBeyondTheGrave@RothBeyondTheGrave2 жыл бұрын
    • Ai rezolvat problema , Sergiu? Sunt în aceiași situație

      @Anonymous-nk9yf@Anonymous-nk9yf2 жыл бұрын
  • Hello my flex disc is ok and the center bearing is ok but still has vibration from 40km/h to 60 km/h only ...so what u think it is mate ? It is 320 w210 2001 i ve checked the 4 tyres and alloys it is all good ...

    @hdanielle4164@hdanielle41642 жыл бұрын
    • Vibration on steering weel or car body

      @autoservice.@autoservice.2 жыл бұрын
    • I hav video on my chanel of all type vibration

      @autoservice.@autoservice.2 жыл бұрын
    • @@autoservice. car body

      @hdanielle4164@hdanielle41642 жыл бұрын
    • @@hdanielle4164 engine mate

      @autoservice.@autoservice.2 жыл бұрын
    • @@autoservice. u means engine mounts ??

      @hdanielle4164@hdanielle41642 жыл бұрын
  • Мале, мале тотал индианци...

    @simeonpetrov594@simeonpetrov59421 күн бұрын
    • Ok bro

      @autoservice.@autoservice.20 күн бұрын
  • youre not wshowing crucial moment of disconnesting and what tools udes.

    @Torturro100@Torturro1002 ай бұрын
    • It's easy

      @autoservice.@autoservice.2 ай бұрын
  • VERY DIRTY S O R R Y UNWASHED

    @donooetomo5213@donooetomo52132 жыл бұрын
  • Hmmm didn’t show the one part I needed to know Lmao

    @w210onpoint2@w210onpoint2 Жыл бұрын
    • It is easy to do

      @autoservice.@autoservice. Жыл бұрын
KZhead