Easy to print, build and fly. Thats my goal and this nailed it! cults3d.com/:1964153
Пікірлер
in the air like a rocket......thumbs up👍👍
22 күн бұрын
THE LEVEL OF EXCITEMENT CANNOT BE CONTAINED!!
@3DPrintHangar_RC23 күн бұрын
I'll be ordering this once I get paid next week. This and the delta. That 90mm just gets me excited
@Kennebec2722 күн бұрын
Love the Smiggen but it needs some round intakes. Much more scale.
@mytubehkjt22 күн бұрын
fr
@benni8724822 күн бұрын
Your designs are great! The next level would be servo cover/protectors and finger grip indents.
@dennismatovich841122 күн бұрын
Some designs have hand holds. At least the ones that really need them. I’ve had 2 control horns break in over 300 flights with them on the bottom. The servo arms are almost unbreakable at this scale and weight. 👍🏻
@hotlapkyle22 күн бұрын
Flies excellent, would like to see more control surfaces involved, like rudder in order to perform knife edges..
@fpvlive22 күн бұрын
Just got my download. Waking up early to run a test print. Can't wait to fly it!
@fp-AvERY22 күн бұрын
Thank you! Enjoy it
@hotlapkyle22 күн бұрын
Oh my i want to buikd it badly!
@aidenkahn433823 күн бұрын
Just downloaded the Cutlass files. One thing I did not find is any recommendations on wall thicknesses, infill percentages, or any list of recommended components to complete. Am I missing something or is this shown on a build video?
@classifiedmp20 күн бұрын
My prints are not specific. As long as you have dialed in your printer to print active foaming LW pla you will be good to go. On cults I specify 1 wall, 1 or 2 top and bottom layers. I prefer grid infill at 3%. Every printer is so different it’s not useful to give any more info on specific settings. As for parts I list I used either a powerfun/ hobby fun 50mm edf and a 1300-2200 4s battery. Any 9g servo. People get worried when they don’t see instructions. Once you build one of my planes you understand the theory behind it. I have a few build videos that show everything you need to finish any of my builds. The way everything glues together it can’t be done wrong. You just glue the parts together how they fit. The Left elevon has an L printed in the bottom and the wings have CG bumps
@hotlapkyle17 күн бұрын
@@hotlapkyle Thanks for the reply. Can you give me an all up weight of your Cutlass airframe only? I know it will be a weight penalty but can standard pla be used?
@classifiedmp17 күн бұрын
@@classifiedmp standard pla would be very tricky especially on this design as it’s a bit larger than others in the 50 class. I don’t have a bare airframe to weigh, only have an airframe with servos and an edf. I’ll weigh that to give you a rough idea
@hotlapkyle17 күн бұрын
....i have subscribed and going thru your videos.....love the whole idea of 3D printed aircraft especially jets....i have been flying RC for 35 years and 3D aircraft brings a whole new dimension to RC.... 1. Do you have recommendations which 3D printer to purchase? 2. Do you have siggestions where to purchase the edf, servos, etc? Cant wait to get started. Thanks
@kenflyergc22 күн бұрын
Glad you’re interested! Technically you can get away with any printer but if you’re new and you want the best nothing compares to the Bambu P1s or carbon if you want multi color prints. I have two Bambu labs printers and they run all day long. No issues and no failed prints. Everyone gets stuck on print settings because they try and use pre foamed LW pla. I recommend using 3d lab print active foaming LW pla. If you join my Facebook group we can all help you get your printer setup. I can also email you the print settings. Email is builtfastkyle@gmail.com
@hotlapkyle22 күн бұрын
Also I highly recommend xfly 50mm edfs or powerfun hobby fun edfs on Amazon. For the 50mm size jets I like the 1300-2200 size batteries
@hotlapkyle22 күн бұрын
As for servos I like the Amazon black and purple 9g metal gear
@hotlapkyle22 күн бұрын
Very nice! What camera are you recording with? Looks great!
@3d_aeroworks22 күн бұрын
Insta Ace Pro! Never going back to GoPro
@hotlapkyle22 күн бұрын
Thanks! I might have to get one!! I have a short clip on my channel about how to quickly and easily patch up those pesky print errors 😉
@3d_aeroworks22 күн бұрын
First flight of shmiggen failed. Buddy hand tossed it and it immediately nosed into ground. I had CG on nubs and also was holding a bit of up elevator. I think maybe you need someone with a really strong throwing arm like this guy evidently has. Maybe my print was too heavy? What should finished weight be?
@jojoma402518 күн бұрын
Sorry to hear that! The nose down thing is very strange. If you watch my shmiggen videos it’s the best high alpha jet I’ve ever flown. What fan, battery and weight? What material did you use?
@hotlapkyle18 күн бұрын
It’s the slowest flying jet so it’s Inherently easy to throw.
@hotlapkyle18 күн бұрын
How wide are the wings on the 64mm cartoon miggen? On my f106 I have them at 22in wing tip to wing tip. Will that be ok?
@Aerospace_Engineering_Noob22 күн бұрын
I’d have to go to the garage and measure. 22” on a 64 is ballpark yes. It will fly for sure
@hotlapkyle17 күн бұрын
I am presently printing one and could you tell us where the CG should be?
@buildlite100519 күн бұрын
CG bumps are printed into the wings 👍🏻
@hotlapkyle17 күн бұрын
@@hotlapkyle Thank you those were the last parts I printed.
@buildlite100517 күн бұрын
Could you put a 6-axis stabilizer inside this?
@davidashley992821 күн бұрын
No reason why you can’t!
@hotlapkyle17 күн бұрын
Do you have a plane that could use a 70 mm edf and retracts?
@aidenkahn433820 күн бұрын
Any can scale up to 70 from 64. Retracts tip 3d printed planes into the heavy category in my option. I so obsessed with having a light weight flying experience I feel like any plane with added retracts would be a pig. If that makes sense. That’s where foam planes are superior
@hotlapkyle20 күн бұрын
@@hotlapkyle understood!
@aidenkahn433820 күн бұрын
Hi, what kind of profil is it and what is the TOW?
@DerDepronFlieger22 күн бұрын
Profile like infill? I think it was 700g all up weight with a 2200
@hotlapkyle17 күн бұрын
Do you now how to up scale the 50mm Edf planes so I can put an 64 mm Edf in It?
@user-cf1db8tt2i16 күн бұрын
Just scale it to 128% and print the fuselage where the fan sits to fit your edf before you print the other parts
@hotlapkyle12 күн бұрын
Thx gonna try it
@user-cf1db8tt2i12 күн бұрын
@@hotlapkyle hé I have try it and its to big do you now what to doe now?
in the air like a rocket......thumbs up👍👍
THE LEVEL OF EXCITEMENT CANNOT BE CONTAINED!!
I'll be ordering this once I get paid next week. This and the delta. That 90mm just gets me excited
Love the Smiggen but it needs some round intakes. Much more scale.
fr
Your designs are great! The next level would be servo cover/protectors and finger grip indents.
Some designs have hand holds. At least the ones that really need them. I’ve had 2 control horns break in over 300 flights with them on the bottom. The servo arms are almost unbreakable at this scale and weight. 👍🏻
Flies excellent, would like to see more control surfaces involved, like rudder in order to perform knife edges..
Just got my download. Waking up early to run a test print. Can't wait to fly it!
Thank you! Enjoy it
Oh my i want to buikd it badly!
Just downloaded the Cutlass files. One thing I did not find is any recommendations on wall thicknesses, infill percentages, or any list of recommended components to complete. Am I missing something or is this shown on a build video?
My prints are not specific. As long as you have dialed in your printer to print active foaming LW pla you will be good to go. On cults I specify 1 wall, 1 or 2 top and bottom layers. I prefer grid infill at 3%. Every printer is so different it’s not useful to give any more info on specific settings. As for parts I list I used either a powerfun/ hobby fun 50mm edf and a 1300-2200 4s battery. Any 9g servo. People get worried when they don’t see instructions. Once you build one of my planes you understand the theory behind it. I have a few build videos that show everything you need to finish any of my builds. The way everything glues together it can’t be done wrong. You just glue the parts together how they fit. The Left elevon has an L printed in the bottom and the wings have CG bumps
@@hotlapkyle Thanks for the reply. Can you give me an all up weight of your Cutlass airframe only? I know it will be a weight penalty but can standard pla be used?
@@classifiedmp standard pla would be very tricky especially on this design as it’s a bit larger than others in the 50 class. I don’t have a bare airframe to weigh, only have an airframe with servos and an edf. I’ll weigh that to give you a rough idea
....i have subscribed and going thru your videos.....love the whole idea of 3D printed aircraft especially jets....i have been flying RC for 35 years and 3D aircraft brings a whole new dimension to RC.... 1. Do you have recommendations which 3D printer to purchase? 2. Do you have siggestions where to purchase the edf, servos, etc? Cant wait to get started. Thanks
Glad you’re interested! Technically you can get away with any printer but if you’re new and you want the best nothing compares to the Bambu P1s or carbon if you want multi color prints. I have two Bambu labs printers and they run all day long. No issues and no failed prints. Everyone gets stuck on print settings because they try and use pre foamed LW pla. I recommend using 3d lab print active foaming LW pla. If you join my Facebook group we can all help you get your printer setup. I can also email you the print settings. Email is builtfastkyle@gmail.com
Also I highly recommend xfly 50mm edfs or powerfun hobby fun edfs on Amazon. For the 50mm size jets I like the 1300-2200 size batteries
As for servos I like the Amazon black and purple 9g metal gear
Very nice! What camera are you recording with? Looks great!
Insta Ace Pro! Never going back to GoPro
Thanks! I might have to get one!! I have a short clip on my channel about how to quickly and easily patch up those pesky print errors 😉
First flight of shmiggen failed. Buddy hand tossed it and it immediately nosed into ground. I had CG on nubs and also was holding a bit of up elevator. I think maybe you need someone with a really strong throwing arm like this guy evidently has. Maybe my print was too heavy? What should finished weight be?
Sorry to hear that! The nose down thing is very strange. If you watch my shmiggen videos it’s the best high alpha jet I’ve ever flown. What fan, battery and weight? What material did you use?
It’s the slowest flying jet so it’s Inherently easy to throw.
How wide are the wings on the 64mm cartoon miggen? On my f106 I have them at 22in wing tip to wing tip. Will that be ok?
I’d have to go to the garage and measure. 22” on a 64 is ballpark yes. It will fly for sure
I am presently printing one and could you tell us where the CG should be?
CG bumps are printed into the wings 👍🏻
@@hotlapkyle Thank you those were the last parts I printed.
Could you put a 6-axis stabilizer inside this?
No reason why you can’t!
Do you have a plane that could use a 70 mm edf and retracts?
Any can scale up to 70 from 64. Retracts tip 3d printed planes into the heavy category in my option. I so obsessed with having a light weight flying experience I feel like any plane with added retracts would be a pig. If that makes sense. That’s where foam planes are superior
@@hotlapkyle understood!
Hi, what kind of profil is it and what is the TOW?
Profile like infill? I think it was 700g all up weight with a 2200
Do you now how to up scale the 50mm Edf planes so I can put an 64 mm Edf in It?
Just scale it to 128% and print the fuselage where the fan sits to fit your edf before you print the other parts
Thx gonna try it
@@hotlapkyle hé I have try it and its to big do you now what to doe now?