KZhead

Compressor tank - Make compressed air tank from a propane gas bottle with tire inflator - Kompressor

Turbo Schneider
2019 ж. 31 Шіл.
1 862 418 Рет қаралды
Жүктеу

Compressed air tank
In this video I show how to build a portable compressed air tank from a propane gas cylinder.
I hope you like the video. I'm happy about comments, likes and subscribers.
More videos in the next time.

Пікірлер

  • I've seen a couple air tank builds but your take the cake pal. The build quality is fantastic. The idea to go the next step and build a block to hold the gauge, inlet and outlet was just great. I'm so impressed I'll go and make your additions to my air tank. Keep it up pal.

    @kurthamblin1240@kurthamblin12404 жыл бұрын

  • Great idea for Aires tank. I try to do one for me and for my small works in painting small things. When I can I restauring a kids cars and make a dioramas. For that this is perfect. Thanks for idea.

    @manelcosta4983@manelcosta49834 жыл бұрын

  • I had a house gas bottle and left the tap and base in place but added a proper bottle fitting and plugged it into my compressor for and extra tank by hose and fittings. Took 15 minutes

    @jeffreysheldrake7943@jeffreysheldrake79434 жыл бұрын

  • Very cool! Amazing work! I would have just stayed with the original ring base. This is something I'd keep as small and streamlined as possible

    @StephenMattison66@StephenMattison664 жыл бұрын

  • That's a beautiful design! Really great craftsmanship! Great job!

    @rinaredner4779@rinaredner47792 жыл бұрын

  • More than a factory made equipment !!! 👍. With ❤️ From 🇮🇳

    @eda369@eda3692 жыл бұрын

  • Bro, very good job, I take my hat for you. I loved all the details, and I even watched the all video without skipping many of the parts... it would make more sense for me that this was done during Coronavirus lockdown, where we all have time to spare ... LOL

    @JoaoAmadoTV@JoaoAmadoTV4 жыл бұрын

  • Great, great job. Thanks for sharing.

    @mickvs@mickvs4 жыл бұрын

  • legend says he's been the undefeated winner of World Annual Compressor Tank Making Competition since 2019

    @a_meitei@a_meitei2 жыл бұрын

  • A+ job on the tank. Something of a contradiction is the very experienced workmanship but most of those tools appeared to be new, first time use.

    @65csx83@65csx834 жыл бұрын

  • I was gonna go build one right now!! Then I remembered I don't have any of these tools.😟. GREAT VIDEO, REALLY ENJOYED IT. 👍

    @pepe_gomez@pepe_gomez4 жыл бұрын

    • CRONICAS DEL PEPE , he doesn’t use many tools to be fair, maybe try something more simple to start practicing...

      @JoaoAmadoTV@JoaoAmadoTV4 жыл бұрын

    • Ŕr

      @muhammadyusuf5744@muhammadyusuf57443 жыл бұрын

    • Not many tools??? Well-built tank but dude got money... Drill press, big bore tap set, plasma cutter (air compressor for plasma cutter), MIG welder, angle grinder, table vise, hardened big bore drill bits, high end fire resistant welders overalls and gloves, and all to make a portable tank to top off the tires of his Mercedes... This isn't the average "lemme scrape around see what I have in the garage..." this is "hmmmm... I'm bored, what can I make in my shop today?" 😂🤘😎💵

      @AlexCamacho@AlexCamacho3 жыл бұрын

    • @@AlexCamacho that's what I was thinking!

      @pepe_gomez@pepe_gomez3 жыл бұрын

  • Da kann man nur sagen: PERFEKT!!!

    @bubupo7537@bubupo75372 жыл бұрын

  • That is a really nice job, thanks for taking the trouble to show how it should be done.

    @tonyhillyard1613@tonyhillyard16134 жыл бұрын

    • Dziękujemy

      @stefandambok8731@stefandambok87314 жыл бұрын

    • Muito bom demais parabéns

      @josiasalves5751@josiasalves57513 жыл бұрын

  • Holy hell. Good job amigo. Couldn't imagine mimicking your work, but sure was good tv.

    @charlesmunson3232@charlesmunson32324 жыл бұрын

  • Saustark! Perfekte Lösung auch für die Boxenausstattung.

    @elbowz3077@elbowz30773 жыл бұрын

  • Excellent presentation

    @jessejames4284@jessejames42844 жыл бұрын

  • clean work!!!

    @oleggorbatenko1618@oleggorbatenko16184 жыл бұрын

  • Now that is impressive! Absolutely beautiful. You made your own distribution block!?! Awesome video. Love the color. Great job! Much respect from the US. Keep your videos coming

    @sosrob8085@sosrob80854 жыл бұрын

    • P L l l.p.pp 0l 0 0l

      @zohrajabeen4230@zohrajabeen42304 жыл бұрын

  • I enjoyed that ....... better than a bought one . cheers

    @ricksilk485@ricksilk4854 жыл бұрын

  • Bravo! Damn thing looks store bought!

    @POOKIE5592@POOKIE55923 жыл бұрын

  • Excelente trabajo, felicitaciones muy profecional y pulcro, así deberían ser todos los videotutoriales de la plataforma. 👍🏾🇨🇴💪🏾Un saludo desde Bucaramanga, Colombia.

    @jorgeluisgarzapuentes5278@jorgeluisgarzapuentes52782 жыл бұрын

  • Tolle Idee und super Arbeit einfach klasse

    @christiank4812@christiank48124 жыл бұрын

    • Mich würde interessieren ob man so einen käuflich erwerben kann?

      @Pocher1989@Pocher19892 жыл бұрын

  • nice work 👍

    @hawkins7331@hawkins73314 жыл бұрын

  • Great build! Someone that actually knows how to paint with a spray can!

    @davidschwartz5127@davidschwartz51274 жыл бұрын

  • Awesome job👏

    @shahjohnsarwari1978@shahjohnsarwari19784 жыл бұрын

  • great job👍🏻

    @user-nb9ef9fh9y@user-nb9ef9fh9y4 жыл бұрын

  • Hello bạn, cảm ơn bạn hướng dẫn cách làm hay lắm 👍🤝

    2 жыл бұрын

  • אהבתי 👏👏👏👏❤️👍

    @user-mi8nw7ei6b@user-mi8nw7ei6b4 жыл бұрын

  • Keep up the good work...safety first.

    @williamortiz4442@williamortiz44423 жыл бұрын

  • Impressive!

    @BobbyBlue1905@BobbyBlue19054 жыл бұрын

  • Only pro can do this.very nice DIY tank compressor tank,i enjoyed watching your video man,keep up the good work.

    @romeomalongjr8051@romeomalongjr80513 жыл бұрын

  • Pas mal du tout bon boulot bravo!!

    @laurentbirou6798@laurentbirou67984 жыл бұрын

  • Saubere Arbeit gut gemacht.

    @gedientfurdeutschland3718@gedientfurdeutschland37182 жыл бұрын

    • Interessanter Name...

      @konigrollo6267@konigrollo62672 жыл бұрын

  • I would say that is a top quality job hell of a lot better than what I have done

    @michaelbyrd2043@michaelbyrd20433 жыл бұрын

  • Просто и практично👍👍

    @luazandgarage3772@luazandgarage37723 жыл бұрын

  • Man that drill press spinning at Mach 1 is making my OCD act up LOL..

    @fathernojoy2706@fathernojoy27064 жыл бұрын

    • Este greșit sa suedezi pe recipient de presiune

      @marinvoicu5365@marinvoicu53654 жыл бұрын

  • Oh my goodness...my brother made one of these about 25yrs ago!...well cool!

    @richardlyd7450@richardlyd74503 жыл бұрын

  • Alter Schlabbe, richtig gute Arbeit!

    @BollerBiker@BollerBiker3 жыл бұрын

  • ...good job. I want one

    @jurgendorries5763@jurgendorries57634 жыл бұрын

  • cool very entertaining the problem is some of us don't have the tools to build it.

    @chuckyrico@chuckyrico4 жыл бұрын

  • nice work

    @MrWayneploof@MrWayneploof4 жыл бұрын

  • Great tire inflator

    @MrWadim94@MrWadim949 ай бұрын

  • awesome job

    @TheOnlyonejeep@TheOnlyonejeep4 жыл бұрын

  • Nice job, but the only thing I noticed was that you ran your pipe taps in to deep. Since they are tapered, the farther you go, the bigger the thread diameter gets and you don`t get a tight seal because most fittings will screw all the way in and not "jam" up like a taper pipe is supposed to do. Still a real good job though.

    @1960gambit@1960gambit4 жыл бұрын

  • Excellent, very neat

    @pupi149@pupi1492 жыл бұрын

  • Awesome !

    @tapioca7115@tapioca71153 жыл бұрын

  • Buenas ideas son las que hacen falta para llevar a cabo mil y un trabajo

    @pepegarciagarcia1217@pepegarciagarcia12174 жыл бұрын

  • Impressive. Most impressive

    @ChattahoocheeRiverRat@ChattahoocheeRiverRat3 жыл бұрын

  • thats a lot of work but in looks great. i just bought a refillhose(?) that has no pressure reducer, cut it in half and put a air connector on to it. cost me 20 bugs for two tanks and i can convert them with only a wrench.

    @misamokuzelpizu@misamokuzelpizu3 жыл бұрын

  • Está bueno lo voy ha hacer tengo le pipa llena de agua jabón esto lo nesecitaba gracias excelente

    @georgecampo47@georgecampo473 жыл бұрын

  • Top Arbeit 👍

    @MeisterSeinerKlasse@MeisterSeinerKlasse2 күн бұрын

  • You are my hero 😎

    @miguelangelvalderrama1808@miguelangelvalderrama18084 жыл бұрын

  • Fantastic. Very nice.

    @johnkritikos7450@johnkritikos74504 жыл бұрын

  • That is awesome and looks great but what is the digital compressor tire fill device you used and what brand.

    @Mike-vk2ni@Mike-vk2ni3 жыл бұрын

  • Brilliant.

    @steveprentice4513@steveprentice45133 жыл бұрын

  • Fantastic!!!!!!

    @johnmccrea8106@johnmccrea81063 жыл бұрын

  • I don’t have the tools to build this. But I do like the idea and concept.

    @Jameson4327@Jameson43273 жыл бұрын

  • Beaiful work..i love it..

    @mike559k@mike559k Жыл бұрын

  • Brilliant, great way to recycle an old cylinder, and create something useful and rewarding!

    @wingsuae@wingsuae4 жыл бұрын

  • W la perfezione bravissimo

    @nicolagallo8753@nicolagallo87533 жыл бұрын

  • Beautiful.

    @Boemel@Boemel2 жыл бұрын

  • I built mine from an old Helium baloon tank much simpler. But works well since years.

    @MagnetbergOfficial@MagnetbergOfficial10 ай бұрын

  • I made mine from an old freon tank I just added a manifold to the valve that was on the tank which also let fill the tank and shut It off so it didn't leak

    @edmiera3583@edmiera35833 жыл бұрын

  • could have used a bit more information on the top bung what was used and how it was formed somehow I missed that part being fabricated and attached otherwise nice video

    @Sherry-jx9hs@Sherry-jx9hs4 жыл бұрын

  • That's a really good job! Greetings from Southport UK.

    @Kevin-gx8lc@Kevin-gx8lc4 жыл бұрын

  • Nice tank nice video but overkill

    @manuelesparza1945@manuelesparza19453 жыл бұрын

  • Nice.. very clean...

    @SidneySambu@SidneySambu3 жыл бұрын

  • Nice job!!

    @dixonqwerty@dixonqwertyАй бұрын

  • Super Video 👍👍👍👍👍👍👍👍

    @schrauberermel1758@schrauberermel17584 жыл бұрын

  • Welding on a pressure vessel? Wow.

    @BruceBoschek@BruceBoschek3 жыл бұрын

  • Brother you are Awesome !!

    @SoundRelaxus@SoundRelaxus Жыл бұрын

  • Creo que es mejor comprarla NUEVA, que hacerla NO crees??, gastas menos dinero y tiempo , pero te felicito está bien hecha 👏👏👏👏👏👏👏👏

    @hobbysnake@hobbysnake4 жыл бұрын

  • Bravo.you are superb.?!

    @hatimelhamri2563@hatimelhamri25632 жыл бұрын

  • ខ្ញុំអរគុណដល់សហគមន៍ដែលបានបញ្ចូលខ្លីបល្អៗ ចែកចាយដល់អ្នកមានចំណុចខ្វះខាច សូមគេារពជូនពណ៍ដល់សហគមន៍ឲ្យការអភិវឌ្ឍល្អៗជារៀងរហូត អ្នកក្នុងជួរ មានសុខភាពល្អគ្រប់ៗរូប

    @tumnetda4156@tumnetda415610 ай бұрын

  • Tank you sir for your precious lecon you are superbe ?!

    @idrisselhamri5985@idrisselhamri5985 Жыл бұрын

  • bravo.mi daresti le misure di tutti i raccordi che hai utilizzato? Grazie

    @giuseppefalcone4210@giuseppefalcone42103 жыл бұрын

  • nice welds

    @AnthonyCelata@AnthonyCelata Жыл бұрын

  • Nice, more than what I'd do. Viewers, do not tighten pressure gauge by grasping the round housing. You will bung the thin sht mtl. There are flats for a wrench.

    @kbmblizz1940@kbmblizz194010 ай бұрын

  • Just wondering how you learnt all these things? Was it an project you did for college or a college course? It seems very well don't and you have a big selection of tools

    @Jack-lr4hv@Jack-lr4hv4 жыл бұрын

    • I think that dude is kind of a Metallbauer. This means he learnt the stuff as part of his Internship (3 years). In Germany we call that "Ausbildung". This is just my guess, because of the way he does handle all that stuff. ;D

      @b4tch3r@b4tch3r2 жыл бұрын

  • Bravo

    @abdelkaderkatalan5415@abdelkaderkatalan54154 жыл бұрын

  • ดีครับได้ความรู้ครับขอบคุณมากครับ

    @swaengswaeng738@swaengswaeng7384 жыл бұрын

    • دير لي تحب ..كل ما ديرها كبيرة تهز بزاف ..هذيك لي دارها تقدر تهز حتى 10 بار

      @hocemhadjout8992@hocemhadjout89923 жыл бұрын

  • Era para ser algo simples, mas se tornou algo tipo profissional. Com tantas ferramentas eu acabo desistindo do projeto.

    @cezarpel2002@cezarpel20022 жыл бұрын

  • Nice.

    @andrewhoward7200@andrewhoward72004 ай бұрын

  • Materials,tooling,and brain ..........you are in heaven . nice job ( over kill ) . most likely no wife to bug him . lol

    @gabrielgeorgeian6477@gabrielgeorgeian64773 жыл бұрын

  • He started welding a propane bottle, the guy next door heard a bang and saw him shooting into the air like a rocket

    @brianfalconer217@brianfalconer2174 жыл бұрын

    • This is why he flushed it with water.

      @arturcybulski6182@arturcybulski61824 жыл бұрын

    • 🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂

      @julianreverse@julianreverse4 ай бұрын

  • How to make a simple job very complex !!

    @descook7724@descook77242 жыл бұрын

  • This must be outside the U.S. because the kits to make an air tank from a propane cylinder are readily available. This person must have some great plans. I don’t see all the trouble he’s going to do.

    @user-hb8be5wb4q@user-hb8be5wb4q4 жыл бұрын

  • Very Nice

    @stephenzies8867@stephenzies88673 жыл бұрын

  • This is a brilliant build! - I want to make one of these based based on this fantastic design but does anybody know, or to what to look for, with the maximum pressure that one of these cylinders can go to safely? - I did see a cylinder years ago in our local tip that was possibly along the same lines, but nowhere as good!, that had 'blown up' in that it was obviously split open by a large inside pressure.

    @Woodworker1947@Woodworker19479 ай бұрын

    • typical overpressure valves coming with the original tank vent at ~325psi so the tank should be cable of 150psi of reserve air...

      @wayneplume1628@wayneplume16285 ай бұрын

  • Really not sure is it worth the effort, so much labor in this tank.

    @lannylee5504@lannylee550416 күн бұрын

  • Klasse ! Habe mir sowas auch vor ein paar Jahren gebaut, Allerdings nicht so perfekt. Habe kein Fahrwerk usw. Ich habe das Orginal-Ventil rausgeschraubt und oben abgesägt das nur noch der untere Teil mit Gewinde übrig war (Messing). Das dann durchbohrt und ein Gewinde reingschnitten und ein T-Stück reingeschraubt. Daran dann Manometer + Druckluftkupplung - Fertig.... Allen Sicherheitsfanatikern sei noch gesagt das diese Gasbehälter einen Prüfdruck von 30 Bar haben, somit für Druckluftanwendungen Save sind. Manche basteln ja auch mit alten Feuerlöschern, da hätte ich Bedenken....

    @stefanp8137@stefanp81374 жыл бұрын

    • Ich wollte nur noch mal sichergehen und daher noch mal meine (eventuelle) dumme Frage: kann man wirklich das Ventil mittels einen Rollgabelschlüssel und einem Hammer so bedenkenlos, problemlos und vor allem gefahrlos demontieren? Vielen Dank schon mal im Voraus für die Info, und vorallem auch Kompliment für dieses sehr interessante und Klasse Video.

      @derhamburgerjung8673@derhamburgerjung86732 жыл бұрын

    • @@derhamburgerjung8673 : Hallo wenn Du absolut auf Sicherheit gehen willst, fülle die Flasche vorher mit Wasser, dann kann auf gar keine Fall was passieren. Zum Abschrauben habe ich einen passenden Gabelschlüssel auf den 4Kant des Ventils gesetzt und mit einem Rohr verlängert. Saß verdammt fest, da das Ganze noch zusätzlich mit einem Gewindedichtmittel (Loctite vielleich) eingeklebt war.

      @stefanp8137@stefanp81372 жыл бұрын

  • Чем бы дитя не тешилось, лишь бы не плакало! :-))

    @igorovcharov7424@igorovcharov74243 жыл бұрын

  • What are the threads on the tank side? I don't have a tap set.

    @petevenuti7355@petevenuti73555 ай бұрын

  • Я похожий себе делал))

    @craftman9775@craftman97753 жыл бұрын

  • Cool

    @noanoa4283@noanoa42834 жыл бұрын

  • Thats sick very cool how much for one of these

    @juanbarba9372@juanbarba93723 жыл бұрын

  • Sub 250 from Holland... ;))

    @ZEUS-eg8jw@ZEUS-eg8jw4 жыл бұрын

  • Great work and craftsman but I am very concern about the safety of using a propane tank in this manner. I guess it would be ok if you coat the inside of the tank with paint or plasti dip so it will not rust and pop on you.

    @troyc5994@troyc59944 жыл бұрын

    • I don't know if it's coated, however propane gas has no oxygen in it, and no moisture. But even with a coated tank the coating is gone if you heat it up too much, like around weldings which are done at home.

      @simonm1447@simonm14473 жыл бұрын

    • Air compressor tanks are not treated or special, hence why they rust as well. Drain the moisture and it'll be fine

      @timsaveneh567@timsaveneh5673 жыл бұрын

    • @@timsaveneh567 You get coated ones, but not with inexpensive compressors. Kaeser (a good German brand) offers models with coated tanks, Schneider also.

      @simonm1447@simonm14473 жыл бұрын

  • !Nice, pls component list

    @Edwin-ck5ul@Edwin-ck5ul4 жыл бұрын

  • Awsome!!! What brand and specs is the welding machine?

    @george22lord@george22lord4 жыл бұрын
KZhead