(HELP) I Can't See My Mig WELDS (Top 5 Tips)
In this video I give you 5 tips on how to better see your welds. There are many blind spots when welding from your hands the metal your welding and also the welding equipment. In this video learn how to position your body and different ways to better see your welds. Below Ill add the links to the products that I used in this video. Some links are from my amazon affiliate account at no extra charge to you. Thanks for watching, Please Like Subscribe and Share.
Check out my Tshirts at www.acdesignsgarage.com
Miller Digital Infinity amzn.to/3tJYtCs
YESWELDER Hood amzn.to/3GuGSGd
YESWELDER 10% off coupon code yeswelder.com/discount/ACDESI...
Stream light Led Flashlight amzn.to/3hXxCA6
ODELFI Head Lamp 10% off coupon: odelfi.com/discount/ACDESIGNS...
Cheater lens amzn.to/3Gty1oa
I had untold problems seeing my welds regardless of whether it was mig, tig or ark when I built my new home workshop. I changed lenses, I changed helmets and couldn’t figure out what was causing my problems since I retired. After more than 6 months of giving up, I had an idea which resolved my problem. I had an ex-hospital stand for drip feed bottles on wheels and mounted some LED lights shining onto my weld seams. It worked. Months of frustration, and it all came down to a lack of light. I thought I had ample light in my workshop, but I was wrong .So, I suggest, if you are having this problem, take your project outdoors with the sun shining across you project from either side of you, if you can now see your welds, then your problem is a lack of light at the work site I hope this helps someone, thank you.
Thats a great idea, thanks for sharing!!!!!
I'm a noob welder and soon found I could not see my welds. The sharp light from a LED worklamp fixed it, need a good way to mount it, this is a good idea
I think that's the easiest solution. More light on your work.
Totally agree and great idea. Us oldies need all the help we can get. You can have all the skill but if you can’t see what you’re doing, it’ll look like an amateur did it.
i forgot to take both sides of protective film off Lense cover and failed a weld test. I couldn't see nothing.
I would add one more tip... when welding where the sun is shining from behind you then the light coming in from the back of your helmet can degrade your vision. Having a dark cloth that you can put over say the top of the helmet down over the back of your head to keep your eyes in the dark helps also. My father-in-law was a pipe welder in the oil field and work a helmet that had built in goggles to keep out the sun.
I wish id of put that in there, thanks for watching!!!!
I had a piece of black canvas attached with Velcro , it acted as an anti spatter ;)
Your daddy in law probably had a pancake welding hood ...is not a helmet...
Black Stallion a welding supplier makes a bib to clip under your helmet to keep your neck from getting tanned (at odd angles). It can also be used at the top of the helmet to block light. The darker the inside of the helmet the easier it is to see the weld because what is coming through the filter is only about 10 watts so reflection on the inside lens will be brighter than the weld arc itself coming thru the lens. I also like to wear black welding jackets because the green ones also reflect light under the helmet which competes with the weld arc. Awesome video!
Denim makes a good hood cloth, keeps sparks off your back and neck.
I’m 70 and an hobby welder. I bought the best helmet from Harbor and mounted an led headlamp on my helmet and it makes a huge difference for me.
Awesome glad to have you here!! Its amazing what a little extra light will do. I bet that worked well!!!!
That's the ticket. Lots of options for the LED's
Great tips. That Columbus-era visor is exactly what my dad taught me with 45 years ago with an old arc welder! Just now getting back to trying welding again with cheap HF flux core and auto-dark hood. This video helps a lot. Thanks.
Thank you very much, Thats what I learned to weld with then I went to the dark side of autodark lol have a Blessed day!!!!!
I’ve always used a large viewing area helmet. Recently, I bought a Vulcan from HF with the large view area, grind mode, auto dark, lots of adjustments, and appears to be very good quality. It also has cheater lenses available. It made a significant difference for me as I can see the puddle and weld path much better. It’s a lot better than the low dollar auto dark I was using, but isn’t a high dollar unit, which is fine because I don’t weld professionally. It is a sweet spot for me. I also use it for plasma cutting which I like. I know lots of people don’t use a helmet for plasma because the arc is largely shielded, but I don’t like to have my eyes exposed to any level of arc process. The helmet adjust perfectly for aluminum and the fit ent adjustments are really good. I’ll add to this that using a t shirt or cloth to the back can work well if you have to weld from a position where sunlight or strong shop lighting is coming in the back. Also, I use a heavy glove on my left hand and a very light mechanic glove on my torch hand which lets me retain my fine motor coordination. In some cases I don’t use a glove on my torch hand, but I try not to do this and expose my skin to the UV.
Thanks for watching!!! Ive heard that that Vulcan stuff is pretty good!!!
Thank you! I've always struggled with trying to get light where I'm welding, and the idea of mounting a headlamp on my helmet is brilliant!
It works pretty good, especially under cars!!!
Decent helmet lights are fairly expensive. I wonder if there’s a rig with some sort of lens to protect from spatter.
@Disoldman not sure if you can attach a small strip of thin lexan over it or not.
I looked far and wide to find a helmet that could be set down to 6 or 7. That did it for me. All of your ideas are good but the best I found was finding the right tint
Thank you so glad I could help!!!! Thanks for watching!!!!
Just found your channel and this video. Just wanted to give you a big shout out! Thank you and I am now a Subscriber. I have had two strokes of the eye and now have part of the optic never dead in both eyes I am now deemed legally blind. I am trying to finish a project and some of this is being a great help to me in many ways and I plan on watching more of your videos . I have been down and out for some time now but you have helped me lift myself up and think more positively and get up and keep trying. And I am doing better all way round, Thank You sir God Bless
Thank you very much for your kind words. I love hearing that my videos may help and encourage people. Thank you for subscribing and hanging out with me!!! I hope you can get your project finished up soon. I'll be praying for you!!! So glad to hear your doing better. Hope you have a Blessed Day, and welcome to the family!!!!!!!!!!
I am very grateful for teaching us what we don’t know me as a beginner. I really do appreciate it so much. Thank you for schooling me God bless you and your family.
Thank you very much for the kind comment, hope you have a Blessed day!!!!
This guy is right on. Ive been doing the same things for years and they work.
Thank you!!!!!
Thanks for the tips. I've been playing with TIG and have a heck of a time seeing what the puddle is doing because all I can see is the arc. Now chances are I could tighten up the arc length too... Practice! Thanks again!
Thank you, you made a valid point keep that arc length tight and it will make a ton of difference 👍
Great video. I use an older non-auto shield with a 4x6 #9 lens and 300w light stand just above the piece on a bench. This has always worked well for me. Like anything else, over time and with practice, you figure out what works for you.
Thats right use what works for you
Is that seriously 24 in.² of viewable area? That's a heck of a view.
I just recently velcroed a light on my hood and made a world of difference, I've always looked backwards as i was dragging, never thought about getting behind and looking forward, learn Something new every day!
Awesome, I always try to keep learning!!!!
Excellent points! I took welding at about 65 years of age and had a rough time welding because I couldn't see the puddle. I finally realize that I had to turn the auto darkening down. Made a huge difference.
Thanks for watching, yes I use to think I had to weld with a shade 12 and I couldn't see squat. Then turned it down and I could see lol
Get to clean wire
Super useful hints, thank you. I have just had the same problems you describe. Really keen to try the lighting trick.
I was amazed by how much it helped me see. Thanks for watching!
At 68 years old I’m going to dabble in hobby welding. Yes I still have my C. Columbus helmet! I think now I’ll modernize. Just came across your video. It’s going to be a huge help. Thanks for your help leading me out of the ‘dark ages’!
Hahaha your welcome, I used those old single shade helmets for years now im spoiled with the new auto dark ones! Thanks for watching!!!!
Years ago I tried my son’s AD helmet. That’s all it took. I had to get my own. 😊
changing over from flux core to gas did the trick for me, cooler welds, less smoke, less flash.
I agree 100%
Hello, Really good tips with being able to see your weld. There was one tip you mentioned that caught my attention and that was "When I MIG weld I drag mine". I always push the weld. I am going to try that technique of dragging. Thank you!
Awesome try the drag you may like it better, its really what your comfortable with!!!
Push gas, drag slag is what I was told but whatever works best for YOU !
This does not help you to see, if you are blind moving forward or backwards makes no difference. There is no help for this, at least none any one wants to part with
I have a few of those oldephi head lamps and never even thought about putting one on my hood. I also have to adjust the auto darkening sensitivity settings everytime I go from grinding back to welding. I'm no expert, but at 50, I took a year of welding, and as a visual learner, I love this video, so thanks.
Thank you very much, im the same way. I learn faster watching someone.
I realised that I was a better welder than I thought! So true about direct lighting. I was so discouraged until I accidentally discovered the difference extra light made, I wish more instructional videos would mention extra lighting. The difference in wire quality for FCAW was night and day too. Who knew?
I agree, the more lighting the better!!!
You just helped me out big time. The light on the helmet is the best idea
Thank you, so glad I could help!!!!
And cleaning the inside and outside of your lens helps a lot.
I agree, thats the most over looked problem on not being able to see!!
Makes sense. My microelectronics headset has led lights on both sides but I never thought of modding my welding helmet. Easy upgrade!
Yeah you cant beat extra lights!!!
Good tips. I started hobby welding a few years ago. I'm nearly 75 so you know the problem with seeing. I have a Hobart 140, so I called Hobart tech support. He suggested getting a Miller Clearlight. It was about $140 or so. Anyway, that was the best investment. Before, I had a hard time even seeing the seam. Now, my welds actually look like I know what I'm doing.
Awesome thank you!!! Keep on stackin them dimes!!!!!!
Wow, glad I ran across these tips, thank you sir. Also working on a 64 -66 . Stay cool.
Awesome thanks for watching, glad you found us!!!!
Man this is exactly what I needed! Was welding my 67 beetle frame head patch and realized I wasn’t seeing near what I needed to! Did the light trick and put my cheater trick in and now we arc’in and spark’in right! Thank you, you’re always the best body work teacher!
Awesome ,so glad it helped ya, thank you also for the kind words!!! Keep on arcin and sparkin!!!!!
if I wasn't confused enough before, I am totally lost now. no disrespect.
I don't even think a 67 beetle has a frame. what's going on here?
Thanks for this. I started MIG two days ago, ran 20 or so horrible open roots. Today I finally got a good 3G after finding a decent set up and body position.
Awesome!!!!!! Welding is a great tool to have in your arsenal of knowlage!
great video, thank you. snap on makes a pretty cool welding helmet with a built in led spot light. i was skeptical at first but now i like it better than my miller helmet
Thats pretty cool, I haven't been on a snapon truck in years, thats maybe a good thing hahahaha
Been welding 60 years and believe tips 1 and 2 have made real difference when I discovered them I also discovered that my choice of lenes darkness effect my ability to see TY 4sharing all good tips
Thanks for watching!!!!!
That was an interesting video. I use a hand held welding shield, as I've found that it's the best for me. My mate bought me a brand new auto darkening hood which I tried to use, but I can't see properly with it because of the yellow tint when it's off. You are sure right about good lighting. I was welding outside in the afternoon and when the light started fading late in the afternoon, I had to pack up and continue the next day, because I couldn't see well enough in the fading light.
Thank you, I welded for years with no extra light, I thought the welder put off enough light but I was wrong lol It makes a ton of difference
I bought that exact light. Cheap and works well. The charge last a while as well. I use it a lot when I’m servicing my truck..
I use the mess out of mine, they work great!!!!!
Amen, brother! Great information that is often overlooked.
Thank you very much hope you have a Blessed Day!!!!
Thank you for the excellent videos. I bought a hood today that has an LED light built into it. Haven't used it yet. But they sell them now. Thank you again. I'm a novice by the way. You do great work. Something for me to aspire to. And I'm an old guy. 67 ;)
Thank you very much for the kind words! Good luck on your welding adventures!!! Your not old Im 45 and I won't hang out with guys under 60 lol
Great video. Glad it showed up on my recommended list.
Thank you for watching, hope you got some value out of it!!!!!
I have had problems seeing when MIG welding for years, and I would often lay a lovely weld a few millimetres alongside the seam I wanted to weld. My friend who is a welder recommended me to draw a chalk line where you want to weld. It works a treat... Gas welding is my favourite, it so calming and you can see everything so clearly.
Yeah that chalk trick works great!!! I need to do more gas welding, your right its pretty fun. Have you tried welding aluminum gas welding, its tough but a good challenge!!!
@@ACDesignsGarage I made holes in the aluminium when I tried 😂
@chrisparti yeah it tough, I need to try it again on a video lol that would be a funny one!!!
Aluminium welding, I've done it, and it works. Henrob torch. Looks like the same one Eastwood sells. It's not tough once you do a few practice welds. But watch a good video first.
Thanks for sharing your knowledge.
Thank you for your support!!!
Miller makes a dual flashligh kit for your infinity as well as other newer Miller hoods. Works 👍 👌
Awesome thanks for the tip!!!
That light is nice. Thanks for the video!
Thank you its a good all around light!!!
i weld outboards or call them 5th wheel mounts and brakets that go on a semi.ive never used a 15 degree angle you would be fired a 45,and circles or dimes is good but not for a semi traler you cant come outta root.circles takes you outta root you loose penatration.i like your techniques for home welds.in our industry wetre not aloud e welds u welds we use whips in root only.good video
Great tips! When I first started TIG welding, I had trouble seeing. I solved the problem almost 100% by getting a pair of 300 power reading glasses, and getting decent lighting on my work. I was TIG welding architectural copper (Range Hoods, Bar Tops, etc) so my welds were VERY critical. It was extremely easy to ruin a $15-$25k hood or countertop, and once there's a hole, it's pretty much all over!
Wow thats awesome, I couldn't imagine the stress of workin with that copper!!
@@ACDesignsGarage It was fun mostly, but glad I'm now retired after 35 years. I build guitars now. WAY easier!! (client-wise that is!)
I’ve been really struggling to shoot a straight line. I followed two tips replacing the lens protector and adding a headlamp. I tried it with an elastic strap but it kept crushing the mask against my face. Picked up some good 3M Velcro and stuck it under the lens area. Huge difference. Pay a few extra $ and get a rechargeable. Thanks for the tips. Changed my welding life!
Awesome glad ut helped, yeah the strap can be challenging, great idea on the velcro!!!
I used that old 2 inch by 5 inch welding hood from 1966 to 1990, started out with a shade 12 lens , and later to a shade 10 lens. Usually welding 5 to 6 hours a day, other time spent on fabrication. Never used a big lens hood, but never had a problem seeing the weld, Stick, Mig, or Tig.
They work fine unless your doing 1000 spot welds on a quater pannel then it wears out your arm outting it up and down lol
THANK-YOU FOR YOUR KNOWLEDGE SIR !!
Thank you I hope this helps, thanks for the kind words!!!!
Thanks a lot specially for the lighting!!!
Your very welcome, thanks for watching!!!!!
Thanks for the tips,much appreciated
Thank you and thanks for watching!!
............................. Great tips. I have had all the issues described here. Always wondered if it was just my eyes going south. I tried these tips. Man------- what a difference. And yes, I am guilty of owning the first type of helmet. Used them for many years. Got used to them. When it finally fell apart, I bought one of the newer styles. I was shocked by the difference..!
Yes, Im spoiled with the new technology lol. Thank you for watching!!!
I don’t know if anyone else mentioned this. But I got a small aaa flashlight that attaches to the end of my mig. It has helped a lot with it being to dark for me and my old man eyes. Thanks for the tips.
Awesome I didn't know they made them, thanks for the tip!!!
@@ACDesignsGarage I don’t remember the manufacturer but I got it from an Eastwood sale they had set up off site at the Hartford Fairgrounds. It helps my bad, beginner welding a lot because I can put the light where I need it without it it affecting my welding helmet.
At 75 I have the same problem, plus had melanoma in one eye, now cloudy vision. Thanks for the tips!
Hope it helps, thanks for watching!!
You are right on, all issues I have faced while welding. I have a Jackson welding hood and I did pay more for the wider viewing lens, the grind mode and shade settings are on the lens, not wired to the hood, this makes it much easier to change the outer protective lenses because it comes right out of the hood. I'd be wary of a yeswelder hood, I bought one before and had to send it back because the lens was defective. I have a Deko I've been using at home for a few years now, got it for around $60. I bought one of those braun rechargeable lights from harbor freight when it was on sale. It has a magnetic base and the light can swivel and turn, so it's very handy for dark places. Good job on the video.
Thank you, thats awesome, I just bought a lens from truarc and it is awesome and pretty cheap.
God Bless you'll! Thanks for sharing
Thanks man, GOD Bless you also, have a Blessed day!!!
GOOD TIPS ..THANK YOU FOR SHARING THEM.
Thank you very much for watching!!
Thanks for all the help.
Your very welcome!!!!!!
Thanks for the tips and God bless you!
Thank you very much, have a Blessed Day!!!!!
Harbor freight helmets priced right I just up graded up to auto one I love it ,had one of those old ones
There pretty good helmets, its amazing how far harborfreight has come!!!!
love your Jesus comments at the end , keep up the good job
Thank you very much God Bless and thanks for watching to the end!!!
When I bought my welder a few years ago I bought a Hobart auto darkening helmet. I could not see what i was welding. I played with the settings but no luck. I decided that I must have gotten a defective helmet. I did buy the cheater lens when I bought the helmet but still it was just too dark. Let me get right to the point, something I finally learned (thank goodness) after too many attempts to weld. Take off your auto darkening eyeglasses. They darken when you strike an arc. It is amazing how much better my helmet works since i figured that out.
Id never thought about that. That is crazy that they darken inside the helmet.
I found that getting one or 2 of those spring clamp, aluminum reflector lights and putting the 100-Watt-equivalent LED indoor flood lights in them, works well. Position as required and it helps significantly.
Ill agree, I never realized how extra light wold help, youd think the arc was enough lol
Great tips...seems to be alot of people including myself...thanks
Thank you very much!!!!
Good video, very educational and practical
Thank you very much!!!!!
Great tips... I use led lights on a stand when I weld. Makes a big differnce when the shop lights are not very bright.
Thank you, ill have to try your trick with the led light also!!!
I went through 3 Yeswelder helmets before I gave up. They work great for bright (Hi current/volt) welding - Stick and Mig - sure. doing light TIG it wasn't sensitive enough it would shut the dimming off occasionally and I'd get flashed. Save the money and go for a good Lincoln, Miller, ESAB etc. they are just so much better.
Yea I agree, the low amp stuff is tough on the cheaper hoods.
Thanks for tips on welding I been away from it for 15 years Now back at it but lost lot time, and memory, Now I got shield with welder from Harbor freight it's 125 with rosin wire it working well but shield got go hard too see to start welding.
This is my latest video it may help you out. I found a new replacement lens you may be able to put in your old sheild. Check it out below if it will help. kzhead.info/sun/iq6kqtdosWt5nn0/bejne.html
Nice video - thanks! I suspect the manufacturers make the cover lens so soft that if you look at it scratches - so you have to keep buying and replacing them. It's ridiculous on how soft the plastic is. I am going to try the wax triick and I am tired of having many scratches happen if I happen to put the welding helmet down wrong. It has to be on purpose!
I agree, it seems like if you stare at those lens they scratch lol
Excellent video with great info, thanks for sharing. Cheers
Thank you and thanks for watching!!
I bought some 3x reading glasses, worked a treat
Awesome thanks for watching!!
Thanks! I think I can use everyone of those… I’ve got a helmet that’s 5 years old and I’ve never changed a single cover. That’s one tip I’ll do when I get back to my shop this afternoon. Great tips!
Thanks brotha!! Thanks for your support 🙏
Sitting here watching and saw you clip the magnifying lens in and cursed that my helmet did not do that, then i thought, wake up feller, you were an aircraft mechanic, go down the shed and make a holder, so i did. Thank You. Took all of 5 minutes. Feel real stupid right now.
Hahaha awesome, Thank you for watching, Thats a great idea, if you dont have it make it!!!!!
Great helpful video 👍😊 THANK you.
Awesome thank you for watching!!!!
That’s a big help thanks for the tips
Thank you for watching!!!!!!! Hope they helped!!!
very helpful thanks for the links
Thanks for watching!!!!
i loved the comment about when you hit 40, wjat comment when you mare about to hit double that and, i just loved the idea of the light fitted to the mask illuminating the actual job.
I hope im still doing this at 80 lol. Thank you and thanks for watching
Good job. I learned some things!!
Thank you!!!! Hope you got some value out of it!!¡
Very grateful for this video! Thanks
Thanks for watching!!!
Dang Son, these are great tips! Thanks for sharing!
Thank you very much!!
I wear those bifocal safety glasses when welding and just working on projects in my shop. I will say though that the separation seriously bugged me at first and was hard to get use to. (still bugs me) When buying a hood, always buy one that has a real easy simple system of changing the lenses. Buy a good headlamp from a safety or industrial pro store; there are a lot of cheap ones out there. Avoid buying any welding gear from Horrible Freight. Good video.
Thank you very much, I agree buy quality helmets for sure!!!!
All great tips mate thanks Cheers from Aus
Thank you very much, thanks for watching!!!!!
Very good points. Thanks 🙏
Thank you!!!!!
Great views of the weld puddle, in a lot of video you don't see anything but welding flash.
Thank you it took me a while to figure it out!!!
great great tips i have the same helmet and use flashlights, strong seeing glasses 👓 i like to windex outside and inside lenses every time 👍
Awesome thank you!!! Ill try the windex, alao ive heard pledge wood polish will help on filling scratches!!!
Awesome video thanks for the tips.
Thank you for watching!!!!
yes welder maks one with a big lens too. True color about 70 bucks. Love it.
Awesome I have there mig welder and plasma cutter and there Awesome also!!!
@@ACDesignsGarage I have seen some good reviews. I had the extra money when I purchased my everlast and it should last me for a while. $2200
Thanks for those tips.
Your welcome thanks for watching!!!
Added a small light to my mig gun worked better than helmet.thanks
Great idea!!!!
Great Info. Thank You.
Thanks for watching!!!
Great tips brother. God bless.
Thank you very much have a Blessed day!!!!
thank you so much that was very helpfull
Thank you for the support 👍
Hi. Excellent video. Please send a link to buy protecting vinyl for the helmet;s front glass. I don;t know how i call these. Thank you
I wear a fibre metal pipeliner welding hood with a gold lens. I do a lot of mig and flux core welding and don’t have any issue seeing.
Those gold lens work great! Most of the time in what I do like rust repair your dealing with such low voltage it makes it tough to see.
This is an ongoing challenge for me. My biggest challenge is seeing the joint in the workpiece as I am welding. I think the drag technique may be the answer since I was convinced I had to push all my MIG welds.
Ive watched alot of very knowledgeable guys say that there is not much of a difference between push/ drag. I prefer the drag because I can see better!!
I try to convince people in the comments section of what I have learned along the way, but it's very difficult as they have learned completely differently than myself. I really hope that people learn that there are two ways to go about it; one will lead to blindness, while the other is counterintuitive, as you always have your eyes moving ahead of the puddle, only watching the edge of the molten metal (never the arc). You have a mental picture in your mind of the whole weld, prior to your hood ever going down (or your auto shade lense ever going dark). Your efficiency at this means you never have an "after image" of the arc, stuck in your eyes, from the beginning of your shift till the end of your workday. You then move to a darker shade lense.. and again a darker shade, as by now you no longer even see the light around the weld, just a red center cherry. It will ruin your day if you watch the arc, and if you do it for a living, you will eventually be going down in shade lenses, not up, as you are only losing your eyesight. I would never weld anything with less than an 11 shade lense, and I've been welding for 25 years now, and I never suffer from eyestrain.
thank you sir that was awesome tips very helpful
Thank you very much for watching!!!
Funny you mentioned the antique lid. Just used mine the other day. Tigerhood or some dam thing. Cheater lens works better with my bifocals. That Yeswelder sounds pretty good if they last. 👍🍻
Thanks for watching, Yeah so far my mig and plasma cutter are great
Thanks man, didnt realise this was such a common problem thought it was just me 😁
No its all of us lol, thanks for watching!!!
Thanks for the tips
Your welcome thanks for watching!!!
Thanks for your time
Thank you for watching!!!!
Thanks for the tips! I've tried all the methods you mentioned, except the headlamp. I just ordered one, and an offer popped up for a second one with an additional $10 off. No brainer! Now I have two coming. I recently picked up the Lincoln flames auto darkening helmet, and it helps a lot, the only problem with it is the adjustment dial. Instead of having a solid click into position switch, it's a rather loose non positive position dial. Yesterday I set it around 9, put my helmet on and when doing so accidently move the dial to grind. I stuck my arc, and about blinded myself. Dammit!!!
Awesome thanks for watching, ive blinded myself alot like that lol
All good tips. The problem I have, which nobody else seems to mention in all these videos, is the workshop is so well lit with big LED overhead lights that in certain positions I can't see my welds because of light shining on the inside of the hood lens, so I have to turn some of the lights off. I think the solution is going to be attaching some flameproof cloth to the back of the helmet. I wonder if more expensive hoods have a better shape to stop this problem.
Thats a good idea, I actually use a piece of a old welding coat over my helmet when filming arc shots with my phone because of the glare. I should of add that in the video. Thanks for watching!!!!
I attached a leather sheet to mine with acable ties every 2-3 inches works a treat
Get you a fire resistant hood cape, blocks out a lot of background light
I was expecting this to be in the video. It’s my main issue I think and I could do with adding a piece of silver hide or something.🇬🇧👍
You are not the only person with this problem. Light entering from behind is a huge problem, and in my case it was compounded by a white safety sticker the manufacturer applied to the inside of my helmet. That went away immediately. A friend gave me a worn-out leather jacket - from the 1950s, no less - and I cut the back out and attached it to my helmet with those metal spring clips used to hold documents together. I like the cable tie idea mentioned here. It helps hugely but does make the helmet hotter … and sometimes contributes to fogging of the darkening lens. What I can’t imagine is how the weld seam is visible when dragging the gun, so I doubt I will be trying that. Even with the leather sheet I can’t always see ahead of the gun.
Funny just tonight I was telling a friend that for me seeing the puddle clearly is the secret to making good welds. First - visual, second - body position, third good lighting. After that getting the right feed speed and only then did I feel in control and with good welds.
I think its one of the major secrets to success of welding, it took me years to figure that. I was worried about everything else lol, thanks for watching!!!!!!
For scratches in plastic, you can use a wax to fill them. I used to use Turtle wax on my bike helmet shield and it took 99% of the scratches out. I used a liquid wax but a paste wax would probably be better. Put it on and wipe it off. Don't let it dry or you'll be in for a fight. Same with waxing your car. Don't let it dry. I like the disposable shields too.
Thanks ill have to try that!!!
Meguiars ABS plastic polish works well for me
I will try this thanks. I have an Sean A-60 the lenses are right at 6 dollars a piece for the outer. I use pledge on them before I put them on, the. Everytime I clean it I use pledge and a microfiber clothe. They last longer but still not long enough for the price. Once they get some small scratches in them, I think because of the curvature of the outer lense it really makes things look weird
Mcguires Plastix headlight restorer/ polish works great on the cover lenses as well as the adf. I'm the lead of my shops fab dept. We're a production welding shop. My cover lenses for my helmet are kinda expensive ( Jackson True Sight ). Using the Plastix headlight polish, I can get minimum of 3-4 months out of my cover lenses. The key is, to polish up & down, then side to side. Not in a circular motion
Excellent video!
Thank you very much!!!!
I've done everything but the light. That's going on next. Thanks for the tip.
Thanks for watching, I hope it helps!!!!