KZhead
Ғылым және технология

The Apple Vision Pro Is Booby Trapped - Teardown & Reassembly

Phone Repair Guru
2024 ж. 14 Мам.
2 076 839 Рет қаралды
Жүктеу

In this video, we teardown the brand-new Apple Vision Pro, and assess how hard it is to repair, disassemble and reassemble. Will we break anything along the way? hopefully not because this headset costs over $3500.
Find all the tools used in this video here: www.phonerepairguru.com/shop
Join this channel to get access to perks:
/ @phonerepairguru
Thank you for watching!
Buy My BLUE Mat: a.co/d/h3iPG3i
Website ( Contact/Tools/Merch/Short Video Products ): www.phonerepairguru.com/
Ask a Question (Join the Subreddit): / phonerepairtalk
PROMO INQUIRIES: Tony@prettygoodagents.com
Social:
Check us out on Instagram instagram.com/therealphon...
Or on TikTok www.tiktok.com/@phonerepairgu...
Snapchat: / phonerepairguru
Twitter: twitter.com/therealprg?lang=en
Facebook: / phonerepairguruu
(The Following contains affiliate links)
My Repair Tools :
Charging Hub With Amp Meter: amzn.to/3DzHecF
Qianli Screw Driver Holder: geni.us/QIANLIICUBE
Qianli Screw Drivers: geni.us/QIANLISCREWDRIVER
Grinding Pen: s.click.aliexpress.com/e/_DDJ...
Display / Battery Programmer: geni.us/QIANLIPROGRAMMER
Tools Used (IFIXIT): geni.us/JBYJF
Qianli Clamps: geni.us/QianliClamps
Electric Air Duster: geni.us/AirDusterESD
My Blue Repair Mat: a.co/d/h3iPG3i
Ifixit Starter Kit: geni.us/STARTERKIT
Phone Cooker (Heat Pad): amzn.to/3OYQz06
Heat Gun: geni.us/HEATGUN
Electronic Screw Driver: geni.us/WOWSTICK
Repair Tools ( Regularly Updated - With Soldering Tools ) :
www.phonerepairguru.com/shop
Filming Gear:
LUMIX G85 geni.us/G85CAMERA
Lumix GH5 geni.us/PANASONICLUMIXGH5
Rode HS2 Headset Microphone amzn.to/3UdzOos
Rode Wireless Go Mic geni.us/RHODEWIRELESSGO
Rode VideoMicro geni.us/RHODEMIC
Studio Lights geni.us/STUDIOLIGHTS
Spinning Thing geni.us/ROTATINGDISPLAYSTAND
Guru Approved:
MAGSAFE MAGNETS : geni.us/BgyY
Airpods Pro: amzn.to/3Qfel9l
Airpods: amzn.to/3Qmsn9n
Airpods Max: amzn.to/3QknnlB
Airtags: amzn.to/3bqKEmS
Easy Button geni.us/EASYBUTTON
Gameboy Case geni.us/GAMEBOYCASE
MagSafe Phone Cooler geni.us/jCfJoB
Nutella AirPod Case geni.us/PhUZC
Giant AirPod geni.us/GIANTAIRPOD
Nano Leaf Lights geni.us/xuKg
Anker MagSafe Charging Stand geni.us/ANKER
Phone Repair Guru assumes no liability for any damage caused to your phone as a result of any of the information contained in this video.
Do not attempt unless you are open to the possibility of further damaging your device.
Chapters:
0:00 Unboxing
0:51 Opening The Apple Vision Pro
2:24 First Look Inside
3:19 Removing The Persona Display
4:48 How to Remove Vision Pro Speakers
5:25 Teardown
5:57 DON'T DO THIS.
6:22 Disconnect All The Flex Cables
6:41 R1 & M2 Chip?
7:14 Booby Trap #1
7:33 Booby Trap #2
8:36 Bendy Board?
8:47 Remove Everything Else
9:07 How Hard is The Teardown & Reassembly?

Пікірлер

  • Thank you guys for watching! this was quite the adventure to make. Subscribe so you don't miss the next one. Find all the tools used in this video here : www.phonerepairguru.com/shop

    @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

    • And you were proved wrong! From the title, I could be wrong.

      @R1ftd@R1ftd3 ай бұрын

    • U broke it. Pls give it to me lol

      @shipnsplash@shipnsplash3 ай бұрын

    • hello :D

      @chad9110@chad91103 ай бұрын

    • yo prg you are my inspiration Imma start making repair videos

      @dc124remix@dc124remix3 ай бұрын

    • this is what I want to do

      @dc124remix@dc124remix3 ай бұрын

  • 1:22 “Unlike other KZheadrs I’m not rich”. Buddy you bought two of these 😂

    @user-iu3be3cq2e@user-iu3be3cq2e3 ай бұрын

    • lol I imagine he meant he’s not Jerry Rig Everything he can’t afford to actually break it beyond use

      @neoish@neoish3 ай бұрын

    • hearing that, I looked onto the subscribers it was 4.4 million.

      @SyedAbbasAhmad@SyedAbbasAhmad3 ай бұрын

    • Yeah he was rich, then he bought two of them.

      @jaydenraeburn1906@jaydenraeburn19063 ай бұрын

    • Even some of the richer youtuber only grab 1 🤣🤣🤣🤣

      @LeeMooEez@LeeMooEez3 ай бұрын

    • Maybe now he live with one kidney

      @fajarkurniawan9434@fajarkurniawan94343 ай бұрын

  • im so glad that the battery cable is removable 😮‍💨

    @hayktadevosyan435@hayktadevosyan4353 ай бұрын

    • Just on one side

      @unicornhuntercg@unicornhuntercg3 ай бұрын

    • @@unicornhuntercgwhat do you mean one side? You can remove the cable from the battery.

      @LordCoeCoe@LordCoeCoe3 ай бұрын

    • @@unicornhuntercgnope. It’s electable by thin sharp object.

      @SupremeShuckle@SupremeShuckle3 ай бұрын

    • The fact that this heavy ass piece of sh*t brick has the battery capacity of an iphone 15 is truly an unfunny joke

      @shuttzi9878@shuttzi98783 ай бұрын

    • yeah true you could get like maybe 20 000 mah even with arks for the same weight@@shuttzi9878

      @Motivational_but_smarter@Motivational_but_smarter3 ай бұрын

  • As someone DEEP into DIY repair, and strongly against how most companies design things to be anti-repair, thank you for this. I do not personally own this device, but those who do, can learn from your extremely risky and expensive tear down. Please give this man a like and sub. This video deserves it.

    @xylexrayne8576@xylexrayne85763 ай бұрын

    • You should think about how hard cars have become to work on, many makes are now nearly unfixable economically, made to be assembled only, if something fails, especially like the water pump which is part of the timing section, the engine is basically junk, often cases tearing it down reveals more damage or hardware simply breaks leaving you little choice but to dump more hours and money into something that's worth less than the cost of repair. Love supercars, buy an older 911, those were made to be maintained, something like a Lamborghini is a money pit. If I wanted these goggles, I'd just wait a year or two for the cheap copies and be happy I'm not supporting apple.

      @Oldbmwr100rs@Oldbmwr100rs2 ай бұрын

    • ​@@Oldbmwr100rs- Break your windshield wiper, and the whole engine needs to be replaced. Ha-Ha-Ha (but sad too).

      @BillAnt@BillAnt2 ай бұрын

  • Hey bro. I work in tech too. If you happen to skim over this, I want to say you did a pretty good job for a first attempt especially without a guide for reference. Unfortunately, not much you can do about the flex, possibly they’ll have a new one on sentrix sometime soon (lol) keep practicing on it and you’ll be one of the few who will actually take those in for repairs. Also, who cares if Ifixit beat you to this. Real technicians always look at more than one video.

    @michaelwonderly3717@michaelwonderly37173 ай бұрын

    • Thanks Micheal, appreciate you taking the time to leave a comment. Probably won't have parts available for this thing for a really long time if ever but we'll see!

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

    • @@PhoneRepairGuru You've got balls of solid steel, bro. Great job.

      @Tropicaya@Tropicaya3 ай бұрын

    • @@PhoneRepairGuru 👍👍

      @michaelwonderly3717@michaelwonderly37172 ай бұрын

    • Well said

      @TheoddLedgend@TheoddLedgend2 ай бұрын

  • This was an even better teardown than iFixit's video where they pretty much destroyed the device. Great job!

    @AgentElite_@AgentElite_3 ай бұрын

    • yeah and made fun of it

      @protein3057@protein30573 ай бұрын

    • iBreakit

      @a-yon_n@a-yon_n3 ай бұрын

    • Ifixit the worst in my opinion. Just a typical US channel. Just how they talk wnna punch them

      @MST3.5@MST3.53 ай бұрын

    • tbf they provided how it went together. their video was helpful for anyone else looking to do a teardown as well

      @HoloScope@HoloScope3 ай бұрын

    • they tore it apart to look at every layer, it wasnt a repair tutorial

      @BooleanDev@BooleanDev3 ай бұрын

  • So you were proved wrong. You did break it. We were right.

    @R1ftd@R1ftd3 ай бұрын

    • Bruh

      @gdoggamerytrulez@gdoggamerytrulez3 ай бұрын

    • Ur God dam right

      @Kevinaya@Kevinaya3 ай бұрын

    • We win 1 - 0

      @Loaf-toast@Loaf-toast3 ай бұрын

    • Looks like bro hasn't figured out life yet 😂

      @jerryesposito@jerryesposito3 ай бұрын

    • He didn’t break it tho

      @ben_durbin@ben_durbin3 ай бұрын

  • You are a brave young man! I've spent the last 40 years tearing down component level electronics… Again I say you are very brave. Congratulations on it still working.

    @johnjksn@johnjksn3 ай бұрын

  • Thank you very much for the effort! It is so interesting to see how everthing fits intro the glasses.

    @DieserEineee@DieserEineee3 ай бұрын

  • "I am not rich " Probably the best joke I have heard from you

    @SiGmA_CaRs777@SiGmA_CaRs7773 ай бұрын

    • What I’m sayin… totally can afford another

      @sejiva@sejiva3 ай бұрын

    • I am not rich... Casually pulls out a second vision pro...😂

      @Ayyouboss@Ayyouboss3 ай бұрын

    • You do realise that he can do a tax writeoff on these since he has a registered business

      @ItsDoms@ItsDoms3 ай бұрын

    • ​@@ItsDoms Tax writeoffs aren't magic, he still had to spend over $10,000CAD on buying two Vision Pros and having them imported from the US.

      @guapdad69420@guapdad694203 ай бұрын

    • @@guapdad69420doesn’t make him “rich”

      @TS-gz2it@TS-gz2it3 ай бұрын

  • 1:23 sometimes foreshadowing is relatively obvious

    @grantlynn1659@grantlynn16593 ай бұрын

  • Bro this the best teardown video I've seen on the Internet. You even beat ifixit. I'll never be able to afford one of these or want too. But the teardown kept me so engaged. Thank you

    @thatLion01@thatLion012 ай бұрын

  • There are many big KZheadrs do teardown of each apple product but no one thought of this...BRAVE, RESPECT 😊

    @Funwithtech79@Funwithtech793 ай бұрын

    • JerryRigEverything has pulled one to pieces before this video. He tested the durability of the glass with hard tools and discovered that the glass is basically plastic laminate and does not stand up to mild scuffing.

      @BWA85@BWA853 ай бұрын

    • @@BWA85 i know that guy his style is different and he is big on KZhead but this guy i guess was first who dismantled and reassembled and fully working... even FIXIT did after this guy...so he is my best now

      @Funwithtech79@Funwithtech793 ай бұрын

  • Thanks; finally I know how I can DIY fix my broken Vision Pro

    @michelwilms@michelwilms3 ай бұрын

    • How did you break it early?

      @Stampyboyz@Stampyboyz3 ай бұрын

    • @@Stampyboyz I think it was a joke, bro

      @indubitably_@indubitably_3 ай бұрын

    • ​@@Stampyboyzin a shower, probably (thanks KZhead shorts)

      @buizelmeme6288@buizelmeme62883 ай бұрын

  • Crazy how you can put this back together. A true master!!

    @danypell2517@danypell25173 ай бұрын

    • Took about 3-4 hours to fully reassemble this. I made the executive decision to leave out those screws anchoring the front camera array assembly so that the next video would be a little easier. Thanks for watching!

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

    • Agreed!!

      @TheOnlyName@TheOnlyName3 ай бұрын

    • @@PhoneRepairGuru I'm really curious if those tape like covers that were over the back side of the processors was RF shielding (since the frame around it gives that vibe) and what side-effects it may have given I didn't see you replace it during re-assembly.

      @GSX-R-lg3ei@GSX-R-lg3ei3 ай бұрын

    • @@GSX-R-lg3eiused for heat dissipation and protection. Likely no ill effects from removing them

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

  • Thank you for the REAL teardown and showing everything, not just destroying everything… appreciate it!

    @DerKlingler@DerKlingler3 ай бұрын

  • Bro I really like your content. Very well filmed and edite. Hope you benefit from this video. Keep up the excellent work. And I will keep following .

    @shlomom2882@shlomom28823 ай бұрын

  • BRO those scratches on the front screen at 2:27 tho

    @edouardtherrien3725@edouardtherrien37253 ай бұрын

    • Not much you can do unfortunately, prying into this is very difficult!

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

    • @@PhoneRepairGuru I think you aced it bro.. well done

      @quaysoncornel@quaysoncornel3 ай бұрын

    • @@PhoneRepairGuru yh curved screen are risky to remove

      @edouardtherrien3725@edouardtherrien37253 ай бұрын

    • Dude, he removed the screen in one piece without knowing how it's glued. This is a learning process, so it's better to scratch his than customers screen because im sure there will be a lot of work for him on these things in the future 😆

      @victordinev5229@victordinev52293 ай бұрын

    • Front screen is shit anyways😂

      @littleboot_@littleboot_3 ай бұрын

  • do you have any plans to repair laptops too? I'm looking forward for it. I saw you few times in shorts but I couldn't find you but at last my algorithm showed your youtube videos to me! Thanks for making these videos I love it!

    @nolgoshipda@nolgoshipda3 ай бұрын

  • You‘re Crazy bro and Genius at the Same time! Keep up the good work!!! 🙌🙌🙌

    @DeckRo26@DeckRo263 ай бұрын

  • I think the most commonly broken part will be the arms the headband straps to. That's the first thing that broke in that drop test video from apple track. It could explain why they're easily removed actually, apple can sell you a replacement pair for $500 or somethin and not need to do any repairs themselves lol

    @CarltonSmith45@CarltonSmith453 ай бұрын

    • First broken part is gonna be that cord on the battery pack

      @dark12ain@dark12ain3 ай бұрын

    • @@dark12ain oh yeah that too, $50 pls lol

      @CarltonSmith45@CarltonSmith453 ай бұрын

    • @@CarltonSmith45 lol they are gonna want your lungs next 😅

      @dark12ain@dark12ain3 ай бұрын

    • @@dark12ainthe cord is removable so are the arms with a sim ejector

      @fluxnekta@fluxnekta3 ай бұрын

    • @@fluxnekta yeah I know that but still it's gonna be easily breakable

      @dark12ain@dark12ain3 ай бұрын

  • i thought u were jerry until i saw the iconic blue board, great teardown. crazy it still works

    @YV-Wyvern@YV-Wyvern3 ай бұрын

  • I love how much information you provide, keep doing that.

    @RrGokeki@RrGokeki3 ай бұрын

  • Can't believe you put it back together and it still works, respect 👏

    @TheOnlyName@TheOnlyName3 ай бұрын

  • Wow, those internals look beautiful as hell! Love the content as always, keep up the good work man 💯

    @nicknorthcutt7680@nicknorthcutt76803 ай бұрын

    • Appreciate it Nick!

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

  • I waited days for this video, and you did not disappoint. I can’t believe the Apple pro is that much technology in a nutshell. I have my likes and dislikes about Apple but this one product cuts the cake.

    @iamN0tTheGoat@iamN0tTheGoat3 ай бұрын

    • Does look like a nut 🥜 lmao

      @d.sadster5684@d.sadster56843 ай бұрын

    • Apple does bad things at times but love them or hate them they probably make the most innovations and bold ideas of any major tech company

      @markdarc0448@markdarc04483 ай бұрын

    • It only seems that way because you don't keep track of what other companies do, VR has been out for a very long time now and other companies like rift, now meta, htc, Sony, valve have all made VR headsets that blow this thing out of the water in terms of performance. Since all that technology has been released and there is a market for it, Apple slipped its way in almost a decade later copying what all the other companies have done and then slapping a massive price on it because it's Apple. Innovative? Seems more like they waited for the best of what others could provide and then just copied the design.

      @sacr3@sacr33 ай бұрын

    • That’s a lot of technology in such a small area. I think the price is justified. I wouldn’t buy one but I appreciate everything that went into making this AND to provide a warranty too.

      @judd_s5643@judd_s56433 ай бұрын

    • I do agree the price is a little unfair, and I have no need to buy this product for any reason.

      @iamN0tTheGoat@iamN0tTheGoat3 ай бұрын

  • Really really loved this video .Cant wait till the next one Good job broooskii ❤️❤️🔥🔥

    @facknarcos@facknarcos3 ай бұрын

  • im so glad that the battery cable is removable 😮‍💨 im happy!

    @BrokenBonesRBLX@BrokenBonesRBLX3 ай бұрын

    • Did you know it's coming wth 4 USBC ports with superfast m6 cores??

      @vijithshankar8883@vijithshankar88833 ай бұрын

  • 2:50 Tbh, the chest opening sound got me, I had minecraft open in background and I was in singleplayer, goddamn scare

    @swa1987@swa19873 ай бұрын

  • Ty for the video brotha!Good luck !🍀

    @robopower5445@robopower54453 ай бұрын

  • This is a very useful content. Thank you for the efforts you made to produce this content.

    @arashbaratchi9379@arashbaratchi93793 ай бұрын

  • 5:12 Eu gonna go crazy over this Nice teardown

    @mrwelshaviation_024@mrwelshaviation_0243 ай бұрын

    • Wait till you see what happens when you remove the cable attached to the external battery of this thing. Apple gone be selling lightnight pro and pro max , this was just a little teaser to showcase 💀💀

      @nerfgodbigguy1405@nerfgodbigguy14053 ай бұрын

  • Now i know where my membership money goes into

    @da7_._@da7_._3 ай бұрын

    • 😂

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

    • I mean you got a point 😂

      @pinballshorts@pinballshorts2 ай бұрын

    • lol

      @MrY7zz@MrY7zz2 ай бұрын

  • Very impressive teardown and assembly. Thanks for sharing.

    @user-yc3zv6gp3w@user-yc3zv6gp3w3 ай бұрын

  • You really a skilful worker… luv uh bro.. I watched almost every videos of yours and totally think that you’re genius in machinery..:👍

    @kingslandcirclegaming4913@kingslandcirclegaming49133 ай бұрын

  • It’s really cool to see this teardown, it sucks the vision pro isn’t very repairable. But the tech is still really cool.

    @quarterluna8911@quarterluna89113 ай бұрын

    • The way everything is layered in so tightly if they did make it repairable it’d swell to the size of a motorcycle helmet

      @BusterDarcy@BusterDarcy3 ай бұрын

    • i mean they compact a lot of sensors camera, the power processing of a Mac inside a small device

      @duongnguyen-zk4rj@duongnguyen-zk4rj3 ай бұрын

    • Waste of money 😂

      @RDplayz@RDplayz3 ай бұрын

    • overpriced as a dev item.... mac pros are "overpriced" because they arent for gamers and such@@RDplayz

      @aropoppy@aropoppy3 ай бұрын

    • ​@@BusterDarcybecause repairable phones are also the size of books? Oh wait, they are slimmer and smaller than IPhones because making tech repairable is about planning, not space.

      @1996Horst@1996Horst3 ай бұрын

  • 6:22 you can hear the pain in his voice😢

    @user-ps2ep4kd4c@user-ps2ep4kd4c3 ай бұрын

  • This is the most interesting video i have seen on KZhead Hands down 🏆

    @TheeSlickShady@TheeSlickShady3 ай бұрын

  • Nice disassembling. Expecting for Vision Pro volt-mod overclocking tutorial!

    @AndriiBilous@AndriiBilous3 ай бұрын

  • Bro took a hit so thousands can learn thank you

    @berwincardozo3349@berwincardozo33493 ай бұрын

  • This sound effects 😂get me every time 06:02

    @Meaheprasad@Meaheprasad3 ай бұрын

  • jerry rig everything also contributed with a lot of information on how to open this. kudo to both of you

    @mohammedkaka5558@mohammedkaka55583 ай бұрын

  • good work man! Very entertaining to watch!

    @user-tb9zc6td8h@user-tb9zc6td8h2 ай бұрын

  • Prg being the greatest technician alive for the 69th time 🎉

    @souvikdas4146@souvikdas41463 ай бұрын

  • Nice video as always!

    @24-7gpts@24-7gpts3 ай бұрын

    • Thanks for the visit

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

  • Finally a youtuber who doesn't break the vision pro to do the teardown. 10/10

    @raimundogonzalez2110@raimundogonzalez21103 ай бұрын

  • Amazing video as always! Thank you for the pain you put yourself through to entertain us

    @thatchannel3032@thatchannel30323 ай бұрын

    • Glad you enjoyed it!

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

  • Thanks dude! awesome video

    @LightlyInsane1@LightlyInsane13 ай бұрын

    • Thank you so much!

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

    • @@PhoneRepairGuru no problem at all. can’t believe the amazing content is free

      @LightlyInsane1@LightlyInsane13 ай бұрын

    • Rofi moment.

      @BaTTx@BaTTx3 ай бұрын

    • @@BaTTx xD hi battx

      @LightlyInsane1@LightlyInsane13 ай бұрын

  • I respect this for him even trying to put it back together with the amount of pieces 😅

    @RedJan2216@RedJan22163 ай бұрын

  • repairman all over the world salutes you!❤❤❤

    @hikurosan1550@hikurosan15503 ай бұрын

  • Im happy that u treated this masterpiece with respect , i cant afford it for now but i hope i do someday

    @hamzajon8823@hamzajon88233 ай бұрын

  • 2:40. I don't think you do dude, your video has only been up for 42 minutes as I write this, and iFixit posted their tear down yesterday (2/3/24).

    @bujin5455@bujin54553 ай бұрын

  • I think you demonstrated your repair skills quite well ❤

    @WillLeingang@WillLeingang3 ай бұрын

  • Your voice when you realize that you rip the antenna cable makes me sad. I appreciate you man. Thank for your sacrifice for making this video.

    @sanraku967@sanraku9673 ай бұрын

  • so is it a customers or did you just try it out to see how painful it was to deal with? very interesting either way since it’s new

    @tastycodlover4082@tastycodlover40823 ай бұрын

    • He himself bought 2 from apple

      @SightSeekerGame@SightSeekerGame3 ай бұрын

  • 0:03 📦 The Apple Vision Pro teardown process unveils intricate technology packed into the device. 1:26 🔧 Removing the front glass of the Apple Vision Pro required specialized tools due to strong adhesive. 2:34 🕵‍♂ In the teardown process, discovering the internal components revealed advanced sensor technology. 4:43 🔄 Disassembly of the Apple Vision Pro proved to be challenging and required careful attention to avoid damage. 7:38 ⚠ Apple's design made disassembling the camera and sensor array complex, requiring unconventional methods. 8:06 💡 Despite challenges, the teardown provided insights into the device's construction, including a bendy circuit board. 9:52 🛠 Reassembly of the Apple Vision Pro was laborious, but successful, demonstrating the device's durability and repairability.

    @dameanvil@dameanvil3 ай бұрын

    • Uh, "demonstrating it's repairability"? Did we watch the same video? I've been fixing electronics since 2001 and this thing is an utter nightmare. I'd refuse to repair this if someone brought one in to me -- not because I couldn't do it, but because it's literally made to be difficult to repair. But I guess that's par for the course for an apple product. I have never, nor will I own an apple product while they remain against right to repair.

      @Zidbits@Zidbits2 ай бұрын

  • that was a messy teardown, thanks for sharing mate.

    @Danny-wv8ec@Danny-wv8ec3 ай бұрын

  • can't wait for part two and how fun this gets!

    @M4TTYN@M4TTYN3 ай бұрын

  • This technology is incredibly interesting and kinda crazy it’s real

    @Whateverifeelike@Whateverifeelike3 ай бұрын

  • wouldn't apple sue you for taking apart one of their products and for emotional damage? sounds like something apple and Nintendo would do.

    @FlameBunny@FlameBunny2 ай бұрын

    • You paid 3499 for it they dont care

      @notwin69@notwin69Ай бұрын

    • ​@@notwin69 They care, balieve me

      @wrkjota@wrkjota15 күн бұрын

    • @@wrkjota yeah its apple💀

      @notwin69@notwin6915 күн бұрын

  • I love watching your videos your the best phone repair person❤

    @DARKTHESLAYERYT@DARKTHESLAYERYT3 ай бұрын

  • 20 years in IT im gonna give you the best advice I was ever given. Either do it right or take a break.

    @hardwirecars@hardwirecars2 ай бұрын

  • I wonder how cool it would be to jailbreak it

    @THE_CARBON@THE_CARBON3 ай бұрын

    • Not going to happen until someone breaks boot on m2…

      @hishnash@hishnash3 ай бұрын

  • 8:43 that bendy board may show that Apple can make a foldable device (ik its a lot more than just that)

    @ThePurple1234567891@ThePurple12345678913 ай бұрын

    • No foldable device I know uses a bending board... its called a cable. Al aple needed to do was buy a foldable screw and then figure out their hinge design. The bendy part of this particular board is also certainly just a cable with thick shielding to make it stiff

      @1996Horst@1996Horst3 ай бұрын

  • you a pro man~!! someone gives him a medal!!

    @wildriftdreamkrusher5801@wildriftdreamkrusher58012 ай бұрын

  • 6:02 You can repair flex cables by soldering wires to it. Its not easy but its doable. 9:14 And with the knowledge you provided and better tools I believe its possible to open it while causing minimal to no external damage.

    @vitor900000@vitor9000002 ай бұрын

    • You cannot as easily with flat flex antennas. The antennas are calculated to radiate and receive energy at a specific frequency which is a function of the surface area and shape of the antenna. If you look closely at those things you'll often see a complex geometry of different widths and sizes of lines and rectangles. It's not as simple as soldering the flat flex back together with jumper wires and for certain applications antenna performance will be deeply compromised. Unfortunately I've definitely experienced this first hand.

      @stefanbehrendsen330@stefanbehrendsen3302 ай бұрын

    • @@stefanbehrendsen330 Reparability will depend on the size of the flex cable and its isolating material. If its just cheap plastic yes it will melt away and be extremely hard to repair. As for the geometry I believe it still better to have a "compromised" antena than no antena at all.

      @vitor900000@vitor9000002 ай бұрын

  • PRG: "I'm not rich and don't want to brake this" Title: It Broke?

    @R1ngmaster@R1ngmaster3 ай бұрын

  • 0:16 Google glass was ewleased in 2014 ///

    @bsfgpmedia@bsfgpmedia3 ай бұрын

  • It works guys. Awesome job

    @computermartkenya@computermartkenya2 ай бұрын

  • Best content creator and so much hardworking 😊

    @lavababa3000@lavababa30003 ай бұрын

  • Bro might accidentally reverse engineer Apple’s latest product😂😅

    @kensensei_@kensensei_3 ай бұрын

    • 😂😂😂 you think he can build his down SoC ?

      @RunForPeace-hk1cu@RunForPeace-hk1cu3 ай бұрын

    • ​@@RunForPeace-hk1cuyeah? He can't? What's the issue?

      @TheRealGigaCat@TheRealGigaCat3 ай бұрын

  • Can't wait for the Vision 2 pro.. It's $$$$ and Case - $$$ Pouch - $$$ Battery - $$$$ Don't worry Apple stickers will be included this time and damn, it's free😂

    @athoofahamed5183@athoofahamed51833 ай бұрын

  • Wow that’s crazy!! Best of luck to you

    @nest1000@nest10003 ай бұрын

  • good job ! nice camera angles also

    @aureliencamps2859@aureliencamps28593 ай бұрын

  • who else thought this was a JerryRigEverything

    @ChicaneryF1@ChicaneryF13 ай бұрын

    • Jerry rig tears down in literal sense, not carefully like this guy

      @SwapnilBBagul@SwapnilBBagulАй бұрын

  • Was your unit actually $3500 or was it like 3800 for more storage?

    @timvlogtv512@timvlogtv5123 ай бұрын

    • 3800

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

    • Oh lawd! ​@PhoneRepairGuru

      @raydenmorris5220@raydenmorris52203 ай бұрын

  • I wish you would weigh some of the key components on your tear down. Just curious on how much the glass weighs ? but great job. Thanks for the tear down.

    @JoelSager@JoelSager3 ай бұрын

    • I can do that in a short video

      @PhoneRepairGuru@PhoneRepairGuru3 ай бұрын

  • Really good teardown, I know for a fact I would have lost my patience from the start

    @danyal3546@danyal35463 ай бұрын

  • 17 thousand reais, these glasses cost in Brazil, an absurd value for something so useless

    @eduardofarias7914@eduardofarias79143 ай бұрын

    • yes! I agree!

      @taylor6245@taylor62453 ай бұрын

  • In truth, that board is only marginally smaller than a board of a modern, portable computer. I think the device can be more powerful than it is now.

    @winconfig@winconfig3 ай бұрын

    • It would get too hot to be that close to a person's face

      @Medeci@Medeci3 ай бұрын

    • @@Medeci Not true. Not true at all. I claimed that it could be more powerful but I never claimed how much more powerful it could be. Also, Moores Law is something you want to research.

      @winconfig@winconfig3 ай бұрын

    • @@winconfig bruh what are you talking about. It uses an M2 chip NOW, are you talking about the FUTURE? The M2 can not run much faster without reaching the legal temperature limit for laptop (in this case face-top) computing devices. If you are talking about the future, ofc it could be more powerful; there's no point in stating that. So explain what you are trying to get across

      @Medeci@Medeci3 ай бұрын

    • @@Medeci Planned obsolescence virtually guarantees at the device can be more powerful than it is now. An under volted or similar M1, M2, M3 could be used. Actually in several areas of technology comma we are starting to see some chips being used on mobile, desktop and handheld. They're different versions of the same thing.

      @winconfig@winconfig3 ай бұрын

    • @@Medeci I'm aware of thermal limits on consumer devices. I don't know why you're making arguments as you are and I have been concise. I remarked about chip unification and then you wanted to gripe about how it uses an M2, as if I didn't know. Are you sane? The fact is that technology like this isn't bleeding-edge and there is always room for improvement. The decision was made to use the M2, not the M3. It (M3) has similar thermal properties when compared to its older 'brothers' per se. I think you just want to argue about something. I think I could tell you the sky is blue and you'd would argue about the sky being blue - and form krass arguments about the sky being blue - without actually disagreeing with me, but trying to make me look wrong in some way.

      @winconfig@winconfig3 ай бұрын

  • Bravo on the deconstruction and reconstruction. Thanks for taking the plunge and sharing this with everyone.

    @glucoseatplay2828@glucoseatplay28282 ай бұрын

  • Kudos to u bruhh....that u were able to teardown so neatly, just saw jerryrigeverything clip of him destroying the machinary 😅😅😅

    @piyush..@piyush..3 ай бұрын

  • EU: “You can’t sell devices with the lightning port!” Apple: “How about THICC lightning port?”

    @panagiotispappas1001@panagiotispappas10013 ай бұрын

    • EU rule is just about charging cable that goes to wall brick. The port on the battery means they comply with the law.

      @hishnash@hishnash3 ай бұрын

  • I am not rich.... Casually pulls out second vision pro 😂

    @Ayyouboss@Ayyouboss3 ай бұрын

  • Daaaaaaaang dropped $7k to take them apart and hopefully get them back together. Glad you did! Great job and great video!!

    @Joesbeasty@Joesbeasty2 ай бұрын

  • awesome vid ! its interesting how many ppl looking for how to teardown their visions pro xD

    @siemano-pl@siemano-pl3 ай бұрын

  • You may not be rich as other tech KZheadrs, but your filming and editing is sure better than some of them! You earned a sub 🔥

    @MalrusOSC@MalrusOSC2 ай бұрын

  • Looking forward to when the kit version comes out. Should save a few quid/dollars. Might be fun soldering those components to the boards, I'll have to get my trusty old Weller out on the stove. Think I'll be ok with the rest though, just need some double sided tape and a bottle of IPA. Oh and some de solder braid in case I slip up! 😊

    @midinotes@midinotes3 ай бұрын

  • Thank you for your service

    @aes9217@aes92173 ай бұрын

  • The time of release of this video is so perfect it can make a channel go from 1k to 1M subs

    @salahthesilly@salahthesilly3 ай бұрын

  • Pretty interesting to see how this is built!

    @joelkelsey7788@joelkelsey77883 ай бұрын

  • 5:18 the quest has removable arms if that’s what you mean you just snap it off or at least with my adjustable attachment

    @RDX_Axo@RDX_Axo3 ай бұрын

  • I'm glad that is still working

    @JeffriRanger@JeffriRanger3 ай бұрын

  • the first layer of glass is actually a built in screen protector, if you break it you can peel it off. The same clip where you showed the broken glass shows it.

    @Tokirumi@Tokirumi3 ай бұрын

  • Jimmy is love. Jimmy is life.

    @Christopher_Cole@Christopher_Cole2 ай бұрын

  • the first tutorial about repairing apple vision pro u did a very nice job bro

    @user-wr7sy6ki8w@user-wr7sy6ki8w3 ай бұрын

  • Excited to see Apple’s official repair toolkit xD

    @bendermolch@bendermolch3 ай бұрын

  • Nice skills, I'm impressed 👍

    @bojandimitrieskimilenkovic9226@bojandimitrieskimilenkovic92262 ай бұрын

  • Thank you for your sacrifice 🙏

    @jibaromar2249@jibaromar22492 ай бұрын

  • the greatest phone repairer that's ever lived 💖💖💖💖

    @channel-clash-craft@channel-clash-craft3 ай бұрын
KZhead