KZhead
Автокөліктер мен көлік құралдары

Clunking Noise Under Your Car or Truck But Suspension Looks Fine? Might Need Sway Bar Bushings!

1A Auto: Repair Tips & Secrets Only Mechanics Know
2024 ж. 25 Мам.
369 647 Рет қаралды
Жүктеу

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/149/e9/sway-bar-link...
Do you hear a clunking noise under your car or truck? You might think it's something like a shock or strut, or ball joint, or even a control arm. But, there are a couple other overlooked things it could be. In this video, Cristian points you to the sway bar bushing. Sway bar bushings are usually rubber, and they deteriorate and stop cushioning the sway bar where it mounts to the vehicle body or frame, which can lead to an annying repetitive banging noise!
0:00 Clunking Noise Under Your Car or Truck But Suspension Looks Fine? Might Need Sway Bar Bushings!
0:22 Two Overlooked Parts: Sway Bar Links and Sway Bar Bushings!
1:44 Looking at A Worn Out Sway Bar Bushing
3:21 Putting on A New Sway Bar Bushing
5:08 Why Is A Sway Bar Important?
6:24 SUBSCRIBE! | Shop 1AAuto.com Link Below!
🔧 List of tools used:
• Pry Bar 1aau.to/tT8/1AXAA00020
• Complete Metric Socket Set 1aau.to/tat5/1AXAA00043
• Ratchet 1aau.to/tbtn/1AXAA00016
• Floor Jack 1aau.to/t3D/1AXAA00068
• Jack Stands 1aau.to/tRd/1AXAA00065
• Wheel Chocks
Subscribe: / @1aauto
For More Info visit us at 1aau.to/h/eXj/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер

  • √ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money

    @1AAuto@1AAuto9 ай бұрын

  • Im dealing with this now. I just replaced struts, lower control arm, ball joint and outter tie rods and im getting a clunking noise after about 2 months

    @mastakush4272@mastakush42729 ай бұрын

  • Great video. Some of the trackday crowd advises to wrap the swaybar with teflon tape to avoid metal-on-rubber contact when the silicone grease eventually wears off or dries out. The teflon tape is mostly to avoid annoying squeaky sounds, but I think this could help the swaybar rotate smoothly and keep the car behaving predictably.

    @scotty305@scotty30510 күн бұрын

  • Just turn the radio up loud to drown out the noise.

    @jackhook4192@jackhook41925 ай бұрын

  • Great video. I like how you actually work on rusty vehicles like mine and not pristine or new ones where everything comes apart easily!

    @briana3544@briana35446 ай бұрын

    • This is supposed to be educational to teach people.

      @NeutronX101@NeutronX1015 ай бұрын

    • @@NeutronX101 That's what I mean! At least they show it on used, rusty vehicles where stuff doesn't always come apart so easily.

      @briana3544@briana35445 ай бұрын

  • This channel helped me and my boyfriend my boyfriend was able to save me a lot of money by learning how to change my rotor and calipers on my car from this channel now there’s something new I can add to the list of things I’ve learned incase I run into this problem thanks 1A-auto😊

    @34Nails@34Nails9 ай бұрын

  • I've been chasing a rattle at the front-end. Replaced control arms and mounts. Never thought to check swaybar bushings ! 😮

    @daveinvictoriavirginia7959@daveinvictoriavirginia79599 ай бұрын

  • I purchased sway bar link from 1A auto for my camry and the quality of parts is very heavy duty and outstanding 👌 I highly recommend that

    @ashrafsiddiquee3190@ashrafsiddiquee31909 ай бұрын

  • Excellent no b.s video, very professional and straight to the point, thankyou from Oz ❤

    @hobbs3424@hobbs34242 ай бұрын

  • I really appreciate this video I have a 99 Ford F-250 on a 4 inch lift so I probably need to check all of that out what you just explained especially before I take her in the mud LOL

    @elizabethrobershaw@elizabethrobershaw9 ай бұрын

  • Thank you for teaching me something new.

    @jbsixt4@jbsixt44 ай бұрын

  • Very nice! Local repair network had absolutely NO IDEA what to do for 3 years. Sold the car in the enc.

    @andrashavas@andrashavas23 күн бұрын

  • Thanks 🙏🏾🙏🏾 this was really really helpful

    @abdullahalsady2529@abdullahalsady25299 ай бұрын

  • Haha. Nice. My 2014 scion tc front left makes a knockong sound. Over rough roads driving straight it rattles. But turning the wheel on curves while driving it doesnt rattle as much. Mainly on the driver side. Looks like i have an idea of where to look now. Sweet.

    @seventwoseven1901@seventwoseven19015 ай бұрын

  • Excellent video very easy to follow thank you

    @mmb1487@mmb14876 ай бұрын

  • Great educational video!

    @sameftek9799@sameftek97996 ай бұрын

  • Best channel on youtube. So informative.

    @devinmccloud@devinmccloudАй бұрын

  • what a great vid. I love the explaining what the parts do for the car!! 1a auto rules!

    @Hunkeykung@Hunkeykung2 ай бұрын

  • Thank you for this video.

    @LouSassoleS@LouSassoleS4 ай бұрын

  • This was an awesome vid! Great explanation of everything.

    @matthewnaderi@matthewnaderi3 ай бұрын

  • Very helpful thanks!!!

    @malissarobinson4402@malissarobinson44024 ай бұрын

  • If only the bushings where this easy to replace on all vehicles. Had to do it on and early 2000s cavalier and it was the worst. The car was not worth all the problems it had. The wisconsin weather really did a number on the car. But it was my ex's grandmas car so i tried my best to keep it safe and working for her.

    @polosavage1@polosavage14 ай бұрын

  • Thank you bro now I can do bushings on my Crosstrek

    @dant3113@dant31135 ай бұрын

  • Great video! Well done! Thanks! 🏆

    @ivanpetsev47@ivanpetsev473 ай бұрын

  • Thanks so much for info

    @chelseywashington6158@chelseywashington61584 ай бұрын

  • Very educative videos...big up

    @laxfloop@laxfloop10 күн бұрын

  • Nice video! About to get this replaced

    @Texas_Made_@Texas_Made_7 ай бұрын

  • Great video thank you.

    @pedrocarralero805@pedrocarralero8054 ай бұрын

  • Very helpful, thank you:)

    @Rumrat@Rumrat4 ай бұрын

  • This video was really helpful

    @adamsotifador7616@adamsotifador76164 ай бұрын

  • Thankyou !! ❤

    @the_hat_on_the_cat4897@the_hat_on_the_cat48976 ай бұрын

  • This is the information I seek in my feed!! This awesome!!

    @michaelgalindo5931@michaelgalindo59312 ай бұрын

    • +@michaelgalindo5931 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

      @1AAuto@1AAuto2 ай бұрын

  • Great !

    @joebaucom4537@joebaucom45379 ай бұрын

  • great video👍 helpful👍👍

    @LadislavSipos-xk4cs@LadislavSipos-xk4cs4 ай бұрын

  • Thanks much for your video. I didn't know this. I bought new bushings for my 2000 Camry LE back sway bar. So the bushings are on bear metal. A mechanic put the new bushings on I didn't watch him. Oh geez. I've been wanting to put heavier sway bars on the Camry. I'm customizing the Camry. So where do I buy silicone paste?

    @williamclick9771@williamclick97719 ай бұрын

  • I've replaced everything except those. Hopefully, that will fix the knocking sound. Everything else did need to be replaced.

    @Ken_1957@Ken_19579 ай бұрын

  • Very nice! Show me how to fix rotted parts of a 4th gen 4Runner frame? Please?

    @NotSoHandyCarGuy@NotSoHandyCarGuy9 ай бұрын

  • So how bad is it to not change it immediately?

    @70Marc@70Marc9 ай бұрын

  • My Scion TC is making this sound even after changing struts/balljoint + lower control arm. Sway bar link looked good nothing torn but I did not check the sway bar bushing. Intro of this video convinced me it's the same clunk ass noise it's making under on both side driver and passenger on speed bumps.

    @henrykim4230@henrykim42307 ай бұрын

    • +Henry Kim We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

      @1AAuto@1AAuto7 ай бұрын

  • Great video. That truck has a ton of rust underneath. It must be in a northern state, lol.

    @alsacs3635@alsacs3635Ай бұрын

  • 5:31 thank u

    @zerin.@zerin.Ай бұрын

  • I would have sanded the sway bar a little bit and got the surface smooth before putting the bushing on.

    @Chromedome-ss6mg@Chromedome-ss6mg2 ай бұрын

  • Does one have to lose the bolts holding the sway bar links? Or one can change them bushings just by removing the brackets?

    @Peponlikespeson3684@Peponlikespeson36845 ай бұрын

  • What's the typical charger on getting that bushing replaced on the sway bar... I have a 2015 and I need that done I believe

    @ctaylorsr@ctaylorsr7 ай бұрын

  • My 2015 Subaru Forester XT rattles and shakes past 55/ 60 mph. If I slightly turn the steering wheel while driving or making a turn at a similar speed or faster it stops the shaking. Now that the check engine light randomly comes on the rattling/ shaking has stopped. When the check engine light is off the shakiness comes back at 55 mph or faster... Guess ill check sway bar end link's and bushings.

    @dand6298@dand62986 ай бұрын

    • +Dan D We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

      @1AAuto@1AAuto6 ай бұрын

  • Are the ebay and Amazon parts any good, or do we need brand names or oem parts, Thanks for any answers!

    @borg386@borg3869 күн бұрын

  • My swaybar does minimal movement nothing close to this only wehn i apply significant force with a pry bar. There is no metal noise. Is this normal? I am trying to diagnose a suspension issue and not sure what part is causing it.

    @Dnasty1@Dnasty18 күн бұрын

  • I have a 2007 Chevy Silverado 2500hd classic crew cab 6.0 liter gas engine 4wd. Same noise. I rebuilt the entire front end...still happening. No play in the sway bar at all. Any ideas? I've been told replacing the body mounts are the issue, but others have said no it's not. Help!

    @RCCustoms73@RCCustoms735 ай бұрын

  • What would cause the truck to feel like it's swaying a little. It was just aligned and a parts were checked.. seemed good.

    @canitbefixed@canitbefixed2 ай бұрын

  • Question do the vehicle need too be off the ground too check this????

    @tommiemarsh9006@tommiemarsh90062 ай бұрын

  • Props to the driver for putting their safety and the safety of everybody else at risk to get that video

    @MrMaster2262@MrMaster22624 ай бұрын

    • No need to dramatize. Road traffic was not endangered by that broken bushing. There are vehicles that don't even have a Sway Bar.

      @iulianc9037@iulianc90374 ай бұрын

  • 👍

    @ov7960@ov79604 ай бұрын

  • Look at those Rusts .

    @ironfistarrival@ironfistarrival6 ай бұрын

  • Chuckled 2:19

    @fredericbandong8841@fredericbandong884129 күн бұрын

  • i have a xtpe jag, 2005. i have changed these bushes and tirods, springs, shocks, bushes where the shocks connect to upper part of the body and one of the arms. I still get a knocking sound on N/S rear wheel. my mechanic has run out of ideas and i run out of cash!. any idea what might be causing it? thanks.

    @tekinmoustafa8141@tekinmoustafa81415 ай бұрын

    • +@tekinmoustafa8141 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

      @1AAuto@1AAuto5 ай бұрын

  • You failed to mention the cv axle.

    @mg8718@mg8718Ай бұрын

  • What would cause my 2005 dodge ram 1500 rear end to squaek

    @timk484@timk484Ай бұрын

  • 2 bolts missing to the right control arm over your head

    @antoinenewton2237@antoinenewton223713 күн бұрын

  • Excellent video! My wife likes you... ha ha.

    @energymarketchile@energymarketchile6 ай бұрын

  • Mine sound like this but only when I reverse at an angle and drive

    @hon3st249@hon3st2496 ай бұрын

  • whats the torque spec

    @matthewgutierrez8817@matthewgutierrez8817Ай бұрын

  • Clunking or Rattlling under your car and suspension seems fine? *Probably The Neighbours Cat*

    @MSHVRP@MSHVRP9 ай бұрын

  • how do you fix rust on a car?

    @rochester3@rochester39 ай бұрын

  • The clucking could also be bad sway bar bushings and are bad sway bar end links

    @lokeycarter6679@lokeycarter66795 ай бұрын

  • My car is currently doing this at 35k miles. Is it dangerous to drive even around?

    @dodgerdogcerritos@dodgerdogcerritos2 ай бұрын

  • I feel terrible for the people that drive in the rust belt or where they salt the roads. 😢

    @freshtapcoke@freshtapcoke3 ай бұрын

  • Thats is the culprit that peeple overlook. I know i did.

    @juliosdiy3206@juliosdiy32065 ай бұрын

  • That noise would never be a ball jlint

    @ciaran6309@ciaran63092 ай бұрын

  • I've seen a lot worse from these 😂😂😂

    @HardiHolpus@HardiHolpus9 ай бұрын

  • "CLUNKING NOISES" started from my Marriage shortly after starting,....."SwayBar" needs ADJUSTING😊 (Its NOT a 'Singles Bar' Darling, its a SOCIAL GATHERING, She said😂,....she sure does like "SOCIAL GATHERINGS" I thought...... THAT is the EXACT MOMENT my SWAYBAR BUSHINGS needed some Jacking UP) Just SMILE, and hit "LIKE" You KNOW you 'RELATE'😂❤😂

    @davidgreen2379@davidgreen23799 ай бұрын

  • Good video but I would never purchase anything off you guys again apparently your guys ball joints are made in China and we’re non grease-able I installed your guys kit on my 89 GMC Sierra shortbed which is basically a project truck so it’ll hardly get driven It was installed 2019 and my ball joint popped out the a-arm while driving 25 mph hitting a corner I was stranded for a hour and could of died if I got as on a freeway this was 2022 again this truck was a project truck hardly ever drove ball joints should last 75k-150k miles and I am mechanically incline so it’s crazy I paid $130 for that whole kit which came with pit arm idler arm inner and outer tie rods upper and lower ball joints 🚩 I ended up paying $320 for just upper and lower ball joints (moog problem solvers) pay once cry once my buddy always said well now I know 😢

    @mikecoxlongthe3rd220@mikecoxlongthe3rd2202 ай бұрын

  • Show us how to do the rear sway bar bushings on an SUV like the first generation Honda Pilot.

    @schifoso@schifoso9 ай бұрын
KZhead