Guitar manufacturing process in China factory | Made in China
we are a professional team that helps overseas customers source products from China
---------------------------
Theme: Guitar manufacturing process in China factory
Date of photography: 2023-04-015
--------------------------------------------------
Show the real manufacturing process in China factory
If you are interested in our videos, tell me about your industry!
--------------------------------------------------
Contact: info@sourcefindcn.com
SFC can choose a real Chinese factory and video the detailed process for you,
If you have a plan to visit China,
we can schedule a factory tour plan before you come,
and be your guide and translator.
--------------------------------------------------
#guitar #guitarfactory #guitarmaking #chinafactory #manufacturingprocess #madeinchina #sourcingchina #sourcingagent #chinesefactory #manufacturer #chinasourcingagent
Respekt for this hard workig people! And a big thank too. I have three in China produced guitars, and they all are great. I want to say: Outstanding. And this for a price that is less than a quarter of the same model produced in the USA. And the quality is sometimes better than the us produkts.
I've never seen guitars being made. It's an interesting process. Is it true that the type of wood used to make an instrument affects its sound?
yhh, type of wood will affects its sound
Very much so. The top is the most important. The strings, through the bridge and saddle, vibrate the top which produces the sound. Sitka spruce, which is getting more expensive to get in quantity and quality needs for guitars, is historically the most common. I myself prefer cedar. The wood used for the back and sides will further impact the sound as they vibrate, too. The neck contributes, a bit, as well. The more solid wood (as opposed to laminated veneers), the more dimensions the sound has. The woods age and usage has an impact, too. As it ages (through use), the sound gets richer due to the wood “loosening” up to vibrate more. The bracing patterns and amount of scalloping is another major factor.
Amazing!
what is the name of that factory?
can I work there? I have experience in guitar. Become the leader of the packing and buffing assembly Im from indonesia
OSHA would shut down this factory in about 10 minutes if it was in the US. Watch a video of guitars being built in the US and compare to this video. Shows why some of the ones that are imported from China are so cheap.
This the reason guitars are not made anymore in america ,between Osha. and the unions they have american destroyed.
S.Yairi YM-02 Very Nice Guitar！
Yairi's are great guitars but are Japanese made. Alvarez is really good for a less expensive guitar. I own both.
At min 9:39 when the Truss Rod is engaged it would be better to use a rubber mallet or mallet with rubber ends to avoid all those bumps on the Truss Rod!! This is why many despise Chinese or Made in China production because certain jobs like in this case are carried out without any care or finesse or respect for the instrument...!! I know that China also produces good quality guitars but seeing this also makes me more wary, especially if you then open the guitar in two and find glue residue, smudges and perhaps a damaged Truss Rod; wood under the keyboard chipped and keys placed badly and not well rounded or smoothed! I prefer the Japanese manufacturing to the Chinese one if I really have to choose but precisely because I see a job done poorly as in this case and it cannot be justified just because perhaps the guitars produced here are at a good or low cost given that they still give work to many people.
These look like baby Taylor’s or martins . Other than the dust ,and maybe some guards this does not look that much different than any other guitar plant .
Martins, there are no Taylor factories in china. All the low end Taylor’s are made in Mexico
A lot of work goes into one instrument.😮
thank you for your watching
Guitars for under $200 ABSOLUTLEY WONDERFUL
Thank for you watching
It looks like a guitar,that's where the similarity ends.
if U play , u will know these are not cheap ones
Моя гитара сделана на этом заводе, очень хорошая гитара 🎸.
Look at the part of this video where the woman works on the linings, she doesn´t control it and after that hot a man laps surfaces of top and back of rims and where is the lining. It is out.
Oriental Cherry is born
Where does all the dust go?
Lungs
hey, too small amount of glue to both end blocks :(
Thank for you watching
These are $69 guitars in the US and elsewhere. Too much random squeeze-out in some places, too little in others, no test fitting the neck, just hammering it in to fit and then compensating with the truss rod which is not the purpose and creates other issues....
Impressive, yet not the level of "care" needed during certain steps. A lot of particulate matter in the air. Can't be healthy. I'd buy one just to help these hard working laborers out.
The wood quality looks very cheap.
labor cheap and less technique to compared with big martin or taylor .because still used hand making.but some good company like Saer guitar to made good classical guitars
S. Yairi factory made in china real
yes
Thanks, but no. I prefer an acoustic guitar that has japanese quality instead that one.
thank you for you watching
@@SelwynRogers Japanese mass produced products were of poor quality before Edward Deming and continuous improvement. He completely changed the game for them. Also Japan has a culture of perfection. The Chinese on the other hand don't have the culture of perfection but a culture of good enough....kinda like the US has the saying good enough for government work. This is why you can't let chinese companies makes things on their own cause they will turn out low quality products. Foreign companies have their people directly in these chinese plants to ensure quality other wise if left on their own will turn out garbage.
You have to compare two products which have similar prices otherwise what is the point
I have a feel the women, who work there, do not know what they do. To make their 1000 pcs a day and go home.No control of each step, Rough job, compare it with Matin for example. Guitars are not a China tradition instrument. We sell China guitars from a very good factory wchich works for Koreans too, but We can see the always repetitious mistake made by just people who make guitars as their job only, no heart into. Chinese have one "adventage" , no respect to environment, no regulating compared with us in EU. It is much easier to make anything in there. But a Chinese doesn´t respect correct details on guitars We do.
I would not give you $1.00 for this junk...