KZhead
Тәжірибелік нұсқаулар және стиль

Satisfying 3D Prints TimeLapse episode 9 (Prusa I3 Mk3 octolapse orbiting camera rig)

WildRoseBuilds
2018 ж. 29 Қыр.
673 900 Рет қаралды
Жүктеу

Get the Best Budget 3D Printer of 2023 Here: bit.ly/3oKdmpq (affiliate link) 3d printing timelapses featuring the prusa mk3. after quite a few busy weekends the orbiting camera rig is complete! I include some of the earlier prints shot with this rig that are less then ideal but as you can see with the sandworm model the quality is improving as i fine tune it. thanks for watching i hope you enjoy!
you can follow me on instagram as well as my new twitch where i stream design, painting, and of course 3d printing!
/ wildrosebuilds
/ wildrosebuilds
model links:
sand worm - www.myminifactory.com/object/...
sphericons - www.myminifactory.com/object/...
can handle - www.thingiverse.com/thing:165...
crow - www.myminifactory.com/object/...
low poly fox - www.thingiverse.com/thing:937740
cubrain - www.thingiverse.com/thing:305...
destiny ghost - www.thingiverse.com/thing:415578
LOTR dish - www.thingiverse.com/thing:275...
benchy - www.thingiverse.com/thing:763622
zombie pen holder - www.thingiverse.com/thing:168609
music:
Bongo by KV / kvmusicprod
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Bongo - KV (No Copyrig...
tags:
#3dprinting #timelapse #3dprint #3dprinter #best3dprinter2018 #satisfyingvideo #satisfying #wildrosebuilds #art #visualart #3dprinttimelapse

Пікірлер

  • Get the Best Budget 3D Printer of 2022 Here: shrsl.com/3obuu

    @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

    • Looks super sweet. Looking forward to the next one👍

      @nwilly@nwilly5 жыл бұрын

    • it looks fantastic :) i really liked the editing and the chosen infill's. Maybe try to block the outside light tho, more light consistency would make those orbit shots really pop

      @Makenitso@Makenitso5 жыл бұрын

    • No No thanks!!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

    • I think the orbital rig would be great for tall things. Eiffel Tower, Orthanc! Have you ever read or seen the book Watchtower by Elizabeth A. Lynn? It's got an amazing tower on the cover. Almost had it as a tattoo. Do tall stuffs!

      @Hawk1966@Hawk19665 жыл бұрын

    • It's wonderful! It might look a bit better if it stops and starts on the opposite direction slowly.

      @DiThi@DiThi5 жыл бұрын

  • This is so awesome!! Can’t wait for more content, everyone would love watching this

    @forsaken579@forsaken5795 жыл бұрын

  • This video is insane ! And the new orbiting effect is absolutely magnificent Huge bravo on this ! I hope you get more subscibers cause you really deserve it bud

    @illusionphenix2277@illusionphenix22775 жыл бұрын

    • illusionphenix thanks! Glad you like it :)

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • Awesome time-lapses! The orbiting camera is a great addition.

    @jmtx.@jmtx.5 жыл бұрын

    • j mtx thankyou glad you like it! Was a lot of fun to build!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • Love the new orbiting shots! It would be cool to see more on the rig you made!

    @redkb@redkb5 жыл бұрын

    • i think i might build a second one for my ender, maybe i'll do a build video! ;)

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

    • Hi redkb

      @WazzRoblox@WazzRoblox5 жыл бұрын

    • @@WildRoseBuilds PLEASE DO! the orbiting shots are amazing! Beautiful video!

      @TimothyArmstrongamblixVR@TimothyArmstrongamblixVR5 жыл бұрын

    • Didn’t expect to see you here!

      @JZM006@JZM0064 жыл бұрын

  • Your time-lapses are the best, the orbiting rig took it to a whole new level.

    @williamendresen1970@williamendresen19705 жыл бұрын

    • thankyou thankyou! glad you liked it! :)

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • I like 3D printing stuff, and what you are doing here is very precious for me. Liked and subbed.

    @emremutlu44@emremutlu444 жыл бұрын

  • Amazing stuff as always dude! You really are the king of time lapses.

    @genericaccount9222@genericaccount92225 жыл бұрын

    • hahah thankyou i appreciate that!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • Very nice job ! Love the orbiting effect ! The crow without supports is awesome

    @thomauga@thomauga5 жыл бұрын

    • Thanks! glad you like the rig!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • Awesome, I've been waiting for these type of shots. Imagine one day it really being this fast

    @statorworksrobotics9838@statorworksrobotics98385 жыл бұрын

    • That would be swell. Then we can print useless stuff faster.

      @thefish5861@thefish5861 Жыл бұрын

  • Hell of a retraction you've got going there at the end! :-)

    @seafax@seafax5 жыл бұрын

    • seafax haha

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

    • It is youtube rewind time

      @Eren-dq4uj@Eren-dq4uj5 жыл бұрын

  • Très bon Travail , merci de partager avec nous.

    @Sadidas01@Sadidas015 жыл бұрын

  • May seem weird, but I love the infill you tend to use. Organic yet Functional on multiple levels.

    @WhiteDwarfVR4@WhiteDwarfVR43 жыл бұрын

  • wow that was very cool! and nice prints! :)

    @PracticalProjects@PracticalProjects5 жыл бұрын

  • This so cool, im totaly relaxed :)

    @ruslanzainchukovsky6463@ruslanzainchukovsky64635 жыл бұрын

  • Never seen such a beautiful infill pattern with those waves😍

    @cagletheboss@cagletheboss5 жыл бұрын

    • its 3d infill

      @adispenser@adispenser3 жыл бұрын

  • This was more satisfying than I thought it would be

    @blackhawk2788@blackhawk27885 жыл бұрын

  • What a fascinating infill pattern.

    @tannergoblin@tannergoblin5 жыл бұрын

  • I like the clock in the back

    @thugTaters@thugTaters5 жыл бұрын

  • The orbiting camera rig is pretty sweet. I'd personally prefer it be slowed down so that it doesn't orbit back though. Great video regardless!

    @TheEvilVargon@TheEvilVargon5 жыл бұрын

    • That's what i was going to do initially but then i'd have to calculate print time and set the step time accordingly, which i may do in the future. still working out the bugs in the rig tho!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • Trop bien la video

    @Bonjsp@Bonjsp4 жыл бұрын

  • Sick infill!

    @skrillixwolf3304@skrillixwolf33045 жыл бұрын

  • Wow damn this looks magical

    @MrBaskins2010@MrBaskins20105 жыл бұрын

    • ;)

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • this is like ASMR for the fellow 3d printing people out there

    @MetroAnimates@MetroAnimates4 жыл бұрын

    • This isn't asmr

      @lobetec314@lobetec3144 жыл бұрын

    • @@lobetec314 No, nut it's the ASMR of 3d printing. Cause lets be honest, watching something print is more enjoyable than listening to a 3d printer for any bit of time :P

      @MetroAnimates@MetroAnimates4 жыл бұрын

  • I could watch this all day.

    @carbide1968@carbide19685 жыл бұрын

    • thankyou! i try and make these as relaxing as possible haha

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • The brain was amazing! I need that for my classroom.

    @RynoDBones@RynoDBones5 жыл бұрын

  • Sweet ghost!

    @lumi7752@lumi77525 жыл бұрын

  • Nice! And the new orbiting camera rig is really nice! But i should say that this video is insane! It’s so satisfying and cool to watch! I honestly haven’t seen any better from other people’s. (No offense 😝)

    @honeytheproto8717@honeytheproto87175 жыл бұрын

  • Love the infill on the low Polly cat... And the brain cube

    @Crits-Crafts@Crits-Crafts5 жыл бұрын

  • 3:53 A Minecraft characters brain:

    @BrickThunder@BrickThunder4 жыл бұрын

    • I thought that too lol

      @mrbobjob8995@mrbobjob89954 жыл бұрын

  • 2:17 that overhang 😍

    @atchoum981@atchoum9813 жыл бұрын

  • Thanks for sharing 😀 👍

    @avejst@avejst5 жыл бұрын

  • wow le truck pour la cannette c'est trop bien

    @portequoi4417@portequoi44175 жыл бұрын

  • Great Job !!! I've no question about orbiting cam rig but the vertical following of the wolf at 3". Could you explain, please ?

    @zobionekenobi@zobionekenobi5 жыл бұрын

  • I was so happy to see a WRB notification on KZhead! Always amaxing. Always fun. The raven took my breath away. I rewatched that part several time. Was that The One Coin Dish? My Elvish isn't very good. How many tries did it take to get the purging filament to spiral just right? Running it in reverse at the end of the video was brilliant! Keep up the amazing work! (BTW, I've posted a few short time lapse videos myself)

    @Hawk1966@Hawk19665 жыл бұрын

    • awesome! thanks for turning notifications on! i always appreciate your comments!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

    • Thank you. It's nice to be appreciated. Love you videos they're so professional looking. I'm getting by literally hand snapping pics on my tablet using a wifi camera (sucks when you fall asleep) or using an action camera whose longest interval is 5 seconds. Anyway, I babbled enough. Take care!

      @Hawk1966@Hawk19665 жыл бұрын

  • Absolute Cool :-))

    @theGermanPrintingNerd@theGermanPrintingNerd5 жыл бұрын

  • 1:58 *DO YOU REALIZE HOW REVOLUTIONARY OF AN INVENTION THAT IS?*

    @_ThistL_@_ThistL_5 жыл бұрын

  • He who controls the spice, controls the universe!

    @josephstaton4820@josephstaton48205 жыл бұрын

  • Cool video! Thanks. And where to buy the first filament? clear pink?

    @lolive08@lolive085 жыл бұрын

  • Between how many layers do you pause the print? Great work!!!!

    @ELEKTROGOWK@ELEKTROGOWK5 жыл бұрын

  • @ 4:25 " my BIG precious!"

    @PhantomWorksStudios@PhantomWorksStudios3 жыл бұрын

  • How did you make these, did you add a move to corner in the gcode everytime a layer was completed or does it do this by default?

    @willemschipper7736@willemschipper77365 жыл бұрын

  • That ghost from destiny was cool

    @robinschepens6228@robinschepens62285 жыл бұрын

  • Hey! As a fellow timelapse guy may I suggest the de-flicker tool in Adobe Premiere? It will remove the lighting flicker from some of your shots. Otherwise this stuff is breathtaking!

    @bobbleczar@bobbleczar5 жыл бұрын

    • thanks! i'm working with a new camera that likes to use auto exposure in manual mode for some reason. also the fox static shot was with adobes anti-flicker at 1, so i may need to read up on that one as it didn't seem to help much

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • How do you manage to make the prints, without threads or excess material, and that they fit perfectly?

    @marciano600816@marciano6008163 жыл бұрын

  • After every layer, printer have done x, y home, than photograph have been taked and print resumed?

    @DaBuzz92@DaBuzz925 жыл бұрын

  • I strongly suggest getting an upgraded nozzle. Either hardened tool steel, or the Ruby nozzle. That cheap brass our Prusa printers shipped with doesn't last long. Upgrading the nozzle substantially improved my print quality and reliability.

    @PowerSports@PowerSports5 жыл бұрын

  • 3:50 engineer's brain

    @JuanDiaz-2023@JuanDiaz-20234 жыл бұрын

  • Awesome play, why the time lapse doesn't see the nozzle. How to do that?

    @blazey817@blazey8174 жыл бұрын

  • Wonder what you do with all those 3d printer objects also you should get the mmu 2

    @spookyseafood7682@spookyseafood76825 жыл бұрын

    • Allen Hasbun I give a lot to friends and some I keep on my mantle and desk!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • Como se llama la base que usas para que no se te despeguen las piezas ? Gracias

    @sonbonetful@sonbonetful4 жыл бұрын

  • What the filament used in the beginning??

    @daniel_s@daniel_s5 жыл бұрын

  • Okay I have to know how many times did you have to do that with the filament poop to get it the spiral like that :-) that was gorgeous

    @nerys71@nerys715 жыл бұрын

  • What is that infill pattern??? Love it

    @FlyingSwitz@FlyingSwitz5 жыл бұрын

  • What kind of coverage you have for the table 1:22? Where can I buy this?

    @MHNNetwork@MHNNetwork5 жыл бұрын

  • Would you consider doing a grabvoid from tremors?

    @tony2800@tony28002 жыл бұрын

  • Wow, how do you configure de printer for do this??? It's amazing, congrats!

    @DukeDoks@DukeDoks5 жыл бұрын

    • octopi and octolapse

      @adispenser@adispenser3 жыл бұрын

  • What are your settings and what slicer do u use for the prusa mk3

    @popcatproductions9627@popcatproductions96272 жыл бұрын

  • Wow, it´s a greatful Video. What Infill and what slicer did you use? thanks a lot ;D

    @DeimosTV@DeimosTV5 жыл бұрын

    • It's probably Cura with the infil cross 3D

      @gustavealbessart971@gustavealbessart9714 жыл бұрын

  • Monsieur Chevalier on vous a reconnu !

    @mitibi@mitibi4 жыл бұрын

  • Wow, very nice man. So... This has probably been asked somewhere, but not seeing it in the 5 minutes I've been looking. :) ...How are you only taking the snaps when the extruder is out of the way of the print? I would suspect something about putting a gcode instruction that moves it off at a consistent interval... Maybe? Is it a secret? :) Very nice work through, top notch.

    @TheJezric@TheJezric5 жыл бұрын

  • At which layer thickness do you print thos prints

    @___-lx3bz@___-lx3bz5 жыл бұрын

  • By any chance what software do you use?? I have been using Cura but the quality isn’t the greatest and I have been tweaking with settings but still don’t get the best quality

    @skrillixwolf3304@skrillixwolf33045 жыл бұрын

  • Bonjour and thanks! I Feel like I'm visiting an art galery! Bravo!!!

    @lionelyork4960@lionelyork49605 жыл бұрын

    • merci thankyou!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • 1:13 nice 3d printed fleshlight

    @brunomusraimondo7710@brunomusraimondo77105 жыл бұрын

  • What camera are you using? So far I've only seen cameras that shoot time lapse up to 4 hours. Would be nice to be able to go over the 4 hour mark.I really enjoy your videos.

    @KowalskiDoes@KowalskiDoes4 жыл бұрын

  • How do you make your time lapses without the extruder in the way

    @___-lx3bz@___-lx3bz5 жыл бұрын

  • Comment fais-tu pour avoir une aussi bonne qualité ? car j'ai une logitech c920 mais la qualité avec octolapse n'est pas super

    @3dprinteur495@3dprinteur4955 жыл бұрын

  • Great prints but lower temp and maybe better retraction Also what filaments did you use

    @regantaylor5848@regantaylor58485 жыл бұрын

  • Nice floor!

    @claykuta@claykuta5 жыл бұрын

  • Always fun to watch. Is the orbiting cam rig home built or bought? More details???

    @twinturbostang@twinturbostang5 жыл бұрын

    • yep home built mostly cnc'd wood and some printed gears!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • How is it working like that. With no supports??

    @IvanBoychuk@IvanBoychuk4 жыл бұрын

  • What infill style is going on for the cat?

    @stevenbeichner9630@stevenbeichner96305 жыл бұрын

  • can u make vid on how to do the effect

    @texaswx2108@texaswx21085 жыл бұрын

    • yes pls awesome effect ;D

      @yukit119@yukit1195 жыл бұрын

    • Размечтался))) Башку делаешь зеленого цвета и в фильтре удаляешь этот цвет, вот и все. Все погрешности мало заметны при таком диком ускорении видео.

      @Andrey00I@Andrey00I5 жыл бұрын

    • Pretty sure you'd need a camera mount that can rotate around the printer and then time the printer head to move out of the way for each shot.

      @4nlimited3dition_4n3d@4nlimited3dition_4n3d5 жыл бұрын

    • Ты неправ. На каждом слою, экструдер идет домой и в этот момент происходит кадр.

      @TheFenix717@TheFenix7175 жыл бұрын

    • Это может быть и то, и другое, но, пожалуйста, говорите по-английски, чтобы другие могли понять.

      @4nlimited3dition_4n3d@4nlimited3dition_4n3d5 жыл бұрын

  • What filament was used at the beginning of the video? It is a very striking color and i must know! :) Great vid just like all your others! You have a sub from me!

    @henrybeadz9411@henrybeadz94113 жыл бұрын

    • I need to know too

      @Avarrocka@Avarrocka2 жыл бұрын

  • How do you always avoid using support and, have a "smooth" surface, if I printed the crow for example, I would have to use support for the tail until it connected with the legs. Also I don't know why but my printer keeps putting blobs in random places, could it be the extrusion rate?

    @edman2740@edman27405 жыл бұрын

    • it might be retraction settings for the blobs, but an extrusion rate calibration never hurts! for prints like the bird i lower my temps a bit and hope for the best haha!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

    • @@WildRoseBuilds thanks for taking the time to reply, I'll be calibrating my printer til I reach something half as good as yours !! Cheers !

      @edman2740@edman27405 жыл бұрын

  • COOOOOOOOOL

    @mr.ballstudios6174@mr.ballstudios61745 жыл бұрын

  • Is the first one a graboid?

    @mrmatt4742@mrmatt47422 жыл бұрын

  • What 3D I printer do you use

    @Js14561@Js145615 жыл бұрын

  • That flawless overhang at 2:20 - wot?

    @TheAndyroo770@TheAndyroo7704 жыл бұрын

  • How is possible, that your horizontal surfaces dont need supports and printing not fail?

    @tomas12912@tomas129125 жыл бұрын

  • Can anyone tell me what type of infill he used

    @drdestructo0631@drdestructo06314 жыл бұрын

  • Hey, I look the movies on Instagramm and now here ;) Can cou tell me what a Filament is it at Start? 0:05

    @Drid-Ghost@Drid-Ghost5 жыл бұрын

  • The printing looks like something is teleporting to earth slowly

    @pretraitoristic5724@pretraitoristic57244 жыл бұрын

  • Красиво!!! Тоже давно заинтересовался 3D принтером, только нет средств на него😭

    @leo-bt2vk@leo-bt2vk5 жыл бұрын

  • Whats that purple spaghetti fillament at the end there?

    @thanhavictus@thanhavictus4 жыл бұрын

  • why do so many people print the benchy? is it like the easiest to make?

    @tachanka697@tachanka6973 жыл бұрын

  • 3:45 a Minecraft brain lol

    @mrbobjob8995@mrbobjob89954 жыл бұрын

  • How does your printer print them without any supports. Any special settings?

    @cemyalcn4123@cemyalcn41235 жыл бұрын

    • He just has a very well-tuned printer! His cooling is spot on, speed settings for overhangs and bridges, most all of it is perfect. If you want to improve your quality, you should have lots of settings you can tweak. Try printing things like cooling calibration tests, or all around print-quality tests. They can really help you figure out what's wrong and help you fine-tune your settings. Think settings like speed, acceleration, cooling, print temps, print bed, good first layers, filament diameter, printing width - (essentially how wide your perimeters and infill etc are; most printed lines are wider than your nozzle diameter) All of those different aspects and more can effect your print quality. Of course, if your printer's hardware (frame, belts, stepper motors, etc.) isn't well built or cheap, or damaged, or anything not right with your hardware, then changing your settings isn't going to solve those problems.

      @jonathanwever8188@jonathanwever81885 жыл бұрын

  • can you mace owl in ro ghoul?

    @CharlesTapac@CharlesTapac4 жыл бұрын

  • Can you make stark tawer

    @tarunachauhan6563@tarunachauhan65635 жыл бұрын

  • i like thes

    @mohamadmh2773@mohamadmh27735 жыл бұрын

  • What infill pattern is this

    @avglvlgam3r307@avglvlgam3r3074 жыл бұрын

  • What infill pattern is that?

    @turbo280zzz@turbo280zzz5 жыл бұрын

  • 0:58 gotta love those stranger things

    @astronomize7489@astronomize74894 жыл бұрын

    • Bro that's the sand monster from Star Wars😂😂

      @shelbyeades5652@shelbyeades56524 жыл бұрын

    • Pretty sure these are the sandworms from Dune (Books Game Movie)

      @chrischiyo7785@chrischiyo77854 жыл бұрын

  • In a good way - finding it hard to add words so i'll just say think of a nice complement and you have it all, i should actually just cancel this comment till i had sleep and coffee but i want to show appreciation for sharing more wonderful time lapses with us.

    @werner1@werner15 жыл бұрын

    • Werner Taljaard haha thankyou!

      @WildRoseBuilds@WildRoseBuilds5 жыл бұрын

  • What bed u use ?

    @error106@error1065 жыл бұрын

  • Layer height?

    @utimelaps1211@utimelaps12115 жыл бұрын

  • 5:28 true words

    @tintaschna3110@tintaschna31105 жыл бұрын

  • Can you make the tirpitz battleship

    @Theathe-fm2xl@Theathe-fm2xl5 жыл бұрын
KZhead