2007-2014 GMC Chevy cracked dash fix for under $200
2019 ж. 27 Қыр.
263 762 Рет қаралды
Fixing a cracked dash in my 2007 GMC Yukon. these dashes Suck from GMC and so many people complain to me about them at the dealership I work at. Well here is a simple way to get it done, I hope this helps somebody.
website for dash skins
Dash skins link
dashskin.com/?aff=32
sound deadening material
amzn.to/3a33VYe
www.carcomplaints.com/news/20...
www.chevroletproblemrecallawareness.com/gm-cracked-dashboardss.com/cracked-dashboard
There should be a class action against GM for these cracked dashes. Our $70,000 4wd Suburban’s dash cracked in three places. Totally unacceptable. That said also had Both front wheel bearing hubs, motor mount, and radiator all go out at 60K miles and this is a mom truck that gets babied.
Yes, my front wheel bearings went also , plus a part coming off the radiator causing an antifreeze leak, now the crack on the dashboard. There should be a class action!
Never in 21 years have I had problems like this in my 99 f150
I agree. Same thing happened with my $85,000 Yukon XL Denali. Totally unacceptable.
Sorry for the second reply, I did some research last night and there was one, but GM’s big fancy lawyers out ruled it saying that it wasn’t a safety hazard (which I can see that it is, if the air bag deploys and the dashboard pieces come at your face) they said it was cosmetic, so the people lost and GM won of course.
I have similar problems with escalade I will never by an suv from them again. They no these problems exist and never do recalls.
I'm very fortunate, dash skin factory is less than 40 miles away from me.i had the guys at the shop install mine.no fuss no hassle.im absolutely thrilled with mine.huge shout out to all the shop and sales people.
Thank you for your helpful video. $52,000 for a new 2009 GMC Sierra and the dash cracks in several places at the 40,000 miles mark. GMC ought to be ashamed of their lousy product but they are not. This my second and last GM truck. They could not care less.
I do appreciate it. Glad it helped. Yeah I work at gm in service and it is a problem. We submit claims to gm and see if you can get assistance and most of the time it’s a no. Thanks for watching
USE A POOL NOODLE TO PUSH INTO THE FRONT OF DASH NEXT TO GLASS TO KEEP IT DOWN WHEN CURING
I just installed one of these on my '09 Avalanche...great product. I used sand bags to weigh it down and pipe insulation jammed under the glass. The only problem is the 1" edge on either side at the bottom. I closed the doors, left the windows open, and jammed a wooden yardstick between the plastic edge and the window jam. I flexed the yardstick enough to hold down the plastic and left the whole thing to cure overnight. It worked great.
Jim Koeniger awesome man. Thanks for watching and sharing your info. I am still very happy with the results of this product especially for the price and the quality. Thanks again 🙏
I need one for my Chevy Tahoe 07. Does anyone know the information that I could get it from?
Oscar Temores dashskins.com or even on Amazon. Hope this helps. Thanks for watching my channel
That video is so helpful. I ordered the supplies. 1999 GMC Yukon .Thanks again 😁😁
I put a dashskin on my 2008 Silverado last month (before seeing this video) which I got from Amazon for $160. My dash was broken in numerous places. I used the entire tube of silicon glue but the end result is great. If you don't know it's a cover you would think it is factory. Great product!
Ted Fryman thanks for watching. I agree for sure looks great. Has been great so far .
Did it stop the rattling noise from the dash to??
Nice, I just purchased a 2007 GMC Yukon XL SLT that is mint. Other than the dash. It has one of these covers floating around in the back, of course there were no installations instructions with it. I will get on putting it in soon.
I got the same year Suburban and it has the cracks in the dash in the same exact place. Dang GM , get your team on this
Matt K yes sir a common issue. Hope this helps you out. Thanks for watching my channel
It definitely still has the OEM look to it nice work love your intro 👍✌
MEAN GENE CUSTOMS thanks I appreciate it
@@an_auto_addiction5742 No problem👍
What glue is best for this install?
Got one for my Avalanche.. your a lifesaver!
Thanks man and thanks for watching glad I could help
JR DIAZ I have a 2010 Avy, is there a functional/safety reason to use a cover?
It is more for looks, but I figure it holds the broken dash together and would probable keep it somewhat intact if you got in an accident. just my thoughts, thanks for watching...
Thank you for the idea wife’s 2011 Tahoe has cracked all the way across, looking for ideas for fixing it and stop rattling!!!
My 07 tahoe dash has took a beating lol. Thanks for the vid, great idea!
Glad it helped! thanks for watching
I had the same issue with the car Seems the main two issues with GM cars for 2007-2014 were consistently there and they made sure they did not fix them for 7 years until the new models came out. The First was the door handles which were just coming off breaking. I have replaced 12 door handles (each two to three times) over the 10 years. in fact, I bought a a box of these door handles and kept them for spare and I ran out of them. I have seen the same issues with all my friends who had these cars and even advised my brother when he bought his that the first thing you will replace is the door handles and it did happen after just 9 months. The second the the cracked dashboards, I have seen this on all my friends GM cars for these models which make the dashboard looks so ugly. If you are at a parking lot, just walk around and look at the similar cars parked, you will see door handles that are loose and cracked dashboards. QA at GM is terrible and worse is that they never fixed it for 7 years until the models have changed. it was like they decided why fix it when every single car sold would come back and replace the dashboards and door handles and make a ton of money in after sale service and spares. after that experience, I gave myself a promise and managed to keep for until now (13 years now) that I will never buy another GM (Tahoe) again (previously, I bought 3 Tahoes cars). They just lost a loyal customer and I advised all my friends against buying.
I've been wanting to do this in my 2013. Thanks for the video.
Any time!, THANKS FOR WATCHING
Thank you for this video, my Chevy dealer just quoted me $2,300 dollars to fix this exact issue. I'm heading out to buy some Velcro tape now!
Awesome thanks for checking out my channel
Thank you so much! My Chevrolet Avalanche dash needs a repair as well. The rattling noise is nerve racking.
Glad it helped. Thanks for watching.
Nice , thanks I will be ordering one, yes they are thin I had got mad at crack rattling and barely hit it and knocked a big hole in it 🙈😂
Listening to good music, I was slapping the top of the dashboard with my hand when it just popped a big hole through the plastic. What crap ! GM skimping on quality again. Losing a loyal customer. 🤨
Just bought a 2013 Chevrolet Silverado, with a cracked dash. Now I have a solutuion! Thanks
Not a problem hit the link in the description and it will take you to the site. Thanks for watching my channel. I appreciate it
I'm getting ready to put a DashSkin on my 2013 Suburban LTZ. I plan on using double sided Gorilla Tape at the cracks and along the seam to help stabilize it. I like the idea of the pool noodle wedges and using the painter tape at the ends. I will update you on how it works.
How'd it go?
Works awesome. For about 2 years until the silicon or epoxy dries up. Then rattles worse than it did when it was just cracked
Any tips to clean the vents? Bought a used 07 tahoe looking to clean it as much as possible. Any tips I'd appreciate. Thank you
Did you make a video of the evap replacement?
Does this interfere with any future dash removal if that were to become needed in the future for other repairs where the dash may need to be removed.
Yep my 07 Tahoe's cracked up yall... that should be a recall
Have small cracks in my 07 Sierra dash. Gonna try some black Flex-Seal to fill first. This will be my backup.
Does this reduce the noise from the underlying broken dash when you hit a bump in the road?
Thanks for the video and will look into this product
they work great, check out the link, and thanks for watching my channel
Does the dash still rattle underneath after you put the new cover on? I'm 50/50 on pulling the dash and using hot staples vs. doing this. thanks for the video!
Because of this video im sold just ordered one for my 2011 Chevrolet Avalanche which is very cracked. People assume that it was cracked because airbags have been deployed which has never been wrecked.
Thanks . I do appreciate it. Glad it helped.
Jesus Christ that's a long ass intro to a video lol
Wow, that’s crazy that happens to so many trucks . Our 87 SS ElCamino has only a 3/4in crack near dash speaker
YUP I HAVE A 86 CUTLASS I AM RESTORING AND THE SAME THE VERY CORNERS ON THE DASH SPEAKER AREA. THANKS FOR WATCHING.
Great video 🙂☕👍
Thank you so much for your video. It is a pleasure to know that I can do it myself even though GM should have done right by the people.
Just like their AFM they should have warrantied. Where is Better business bureau when you need them?
Thanks for this video!!!
Thank You. Job well done.
Thanks for the info.
Thanks for the video. Do you know if they have covers with the ac vents included? Mines are all broken up too.
Not that I know of. may have to get them from gm. thanks for watching,
Great video! I have a 2011 Yukon and a cracked dash. It RATTLES like crazy! Will this cover stop the rattling? Should I replace the top dash with the pins first and then the cover? Thanks
no use the sound deadening material to cover the cracks and then install the dash cover , mine is still quiet , thanks for watching
What is the tape stuff called that you used to repair the crack?
My passenger side airbag is on a government recall. My dash has the same exact cracks as yours. The dash cracking and sending fragments of shaddered plastic into people when the airbag detonates is the issue. If they try leaving my dash cracked, im going to say something. I sell more Chevy's than anyone in Arizona, i promise they will miss out on an opportunity
So GM came up with a cover for their dashes bc they wanted to go cheap and make a piece of crap in the beginning. So wouldn't it have made more sense to just make a good one correctly the first time?
CC L No the cover is from a company dash skins. And yes I agree it was made cheap but this is a great alternative for a fix. Thanks for watching
I think the 2007 dashes started cracking around 2009, so GM knew about the problem for years and still never fixed it. Even the 2014s will all crack.
Yep, had a nice 1998 Silverado, & the dash cracked, and NOBODY had one, or could get one. Unavailable!!! So I ended up buying my 2007 Silverado LTZ. which is beautiful, but, the dash cracked once again! I recently called a dealer to get the cost to replace it.....wait for it..... $1872.00. Guess i'll try this cover.
Simce you're a GM tech. Whats the trick fix for the total P.O.S drivers door handle pull? Mine broke on 10pc on me. Ive yet to pull it and see what I can appoxy up.
Just bought an 11 avalache ltz with the same issue and dashskin should arrive today. Best option for gm failure.
How do I find the adhesive paper you put underneath to keep the crack dashboard quiet?
Will it be possible to put another complete piece from a newer tahoe, that is, from a more recent generation? Or open a place that sells you all new pieces but of better quality?
Appreciate the video.
Have you thought of removing the dash and then applying the skin? I know it would be more work taking it off but I think you could get a better seal on the dash skin im thinking of doing this for my Denali I can’t find an actual dash to replace it with
exo skeleton it is just a shell so you kinda need the old dash there to adhere to. Hope this helps ya. Thanks for watching my channel
With that center speaker cut out on the replacement dash being so small compared to the factory speaker cut out is that a big enough cut out being significantly smaller to still get optimal performance/audio out of that speaker? I have a audio system in my Tahoe and the speakers inside the doors and the one in that dash were very expensive. Would I be losing sound and/or performance with such a smaller cut out? My dash has recently cracked also but if that tiny cut out is going to mizinmize the performance of that speaker for what I paid for it I may just drive around with it cracked. I'd love to hear your opinion or thoughts. Thanks man
I haven’t noticed any Audi loss but I also have factory speakers. I did get rid of that annoying dash rattling with the center speaker moving around so I’m happy about that. You could always test for it and play some audio before you install it. I wouldn’t think you’ll loose too much audio. Thanks for watching and I hope this helps.
Could you let me know what glue or silicone you used... I have a 2011 Avalanche that I will be repairing.. You did a great job, looks nice.. Thanks for sharing
It comes with the silicone and I used. 2 part epoxy in the edges. Thanks for watching my channel
Thanks for this tutorial...
I have a 2009 Tahoe Z71 with the same crack pattern as on your vehicle. I am curious about something that you mentioned in a reply to a post by Jessie Espinoza about 11 months ago. This is your reply to said post: "It comes with the silicone and I used. 2 part epoxy in the edges." If you mentioned 2 part epoxy in this video, then I missed it. Did you actually use something like J-B Original Cold Weld, or J-B ClearWeld, and if so, did you only apply it to the lowest parts of this cover, where you held it down with the yellow tape? Any response would be greatly appreciated.
Yes just used a two part in the corners. Thanks. The two part was one that mixes as you squeeze it out of the tube. Hopefully this helps
How has the Dynamat worked out? I’m sure it helps with rattles. Did it have any affect on fit and finish? Is there any other material you would recommend if you don’t have extra dynamat laying around?
They say in the instructions to use duct tape. Either way it definitely helps with rattles. I hope this helps. Thanks for watching my Channel
Wonder how the dash skin is affected when the air bag deploys.
Great Video!
Hey how did you know you had to replace the evaporator? I’m having ac issue but I’m thinking it’s one of the actuators. Every time I reset the ac it last going good for a couple of days. But just curious as to how you knew it was that sir
AJ Juarez I was getting a smell from the vents at times that was kinda musty. And then I used a Freon detector on the air coming out of the vents and it picked some up. It definitely blows cold now. Thanks for watching my channel
Nice. Just wish they made a piece to cover air bag too. Does the sensor in center of dash still get enough light to work right sense it's down further now?
No I haven’t had any problems with the light sensitivity on either one I have installed. Thanks for watching my channel
@@an_auto_addiction5742 good to know. Thanks
My 2007 Silverado (GMT900) began to crack this year. The truck has not experienced any unusual stress. The plastic is simply cracking. Its better to work on the plastic in hot weather so, I'll just replace the dash next summer.
Yes sir it just seems to be junk plastic. Mine was the same way. Just started cracking out of no where. Thanks for watching my KZhead channel
Does your dash still rattle after you installed cover? Thinking of getting one for my 07 Tahoe.
EIGHTEEN HUNDRED no I used to get a rattle from the center speaker driving on the highway and it would drive me crazy. So far so good. I would recommend it. Thanks for watching. Hope this helps ya
Very Nice
That airbag crack kills me!!! I drive an extra block down every day just so my 2012 didnt rattle or crack. Road was too bumpy. I was waiting on food 1 day and seen it was cracked. Just turned 60k. Been in a garage all its life and I work midnight. So it never even sees the damn sun.
I feel your pain my 2011like new GMC Sierra 42,000 miles never seen snow cracked today near the air bag !! My 1997 GMC dash is perfect !
Hi and thanks for your video. How has the Dashskin held up?
So far it’s been great. No issues. Thanks for watching my video
Thx for the video. What happens if the dash has to be removed to do a heater core or evaporator? I have a 2011 Tahoe but I'm going to replace the carrier instead. It took 10 years to crack even though it is parked inside a garage with 88k on the odometer. Shame on you GM !!!!! And that's why I buy from other manufactures now. I also worked for GM for 30 plus years and saw a lot of problems that should have been cover by special policies but they took a blind eye to them also.
Yes agreed ... I did my evaporator about a month before. The cap uses like a silicon adhesive so shouldn’t be too bad to pull off. I appreciate it. Thanks for watching my channel
Hi did you just put the silicone around the edges or under the whole dasskin. Looks good by the way.
Both. And thank you the dash comes with info on laying down the glue
Where are you located at?
A shame the class action lawsuit for the dash issue got dismissed due to not "having enough" for a good case. Complaint wasn't specific enough, insufficient evidence of it being a design failure instead of coincidence, no estimates of what models are effected, etc. In fairness, the judge that dismissed it said if they were to tighten up the complaint to fix those things, it would be fine to replead. But man, gathering that kind of evidence takes much more work then most people are able to devote, especially for a primarily cosmetic(?) issue. Again, a shame
Anyone have their roof rust out?!?! 2009 top of cab rusted out completely in each and every groove!!!
GM HASN' HAD A DECENT DASH EVER SINCE THEY CHANGED FROM METAL TO CHEAP ASS PLASTIC
My 14 just started cracking. I contacted GM directly and the local dealer called and offered to replace the cracking dashboard for a little over $300. Usually costs over $1100.
That is pretty awesome. Most the time they won’t do anything or very little. I would definitely do it for 300
@@an_auto_addiction5742 I plan on it. I was suprised myself. I've had the truck for almost 8 years and I plan on keeping it for a while longer so definitely worth it.
Whoa - I’m about to have the dealer replace the dash in my 2014 GMC. He swears there’s no help from GM. Quote is almost $800 for the parts and $1,000 for the labor. Are you sure the $300 offer included labor?
@@OleHippy I've already had it replaced and I gave the dealer $326 out the door and they let me leave with my truck. So yes, I'm pretty sure the quote was good. 😆 I can't speak for everyone, but I contacted GM directly and they did the rest in coordination with the dealer.
I have this model 2007… the power seat won’t go forward and back. Sometimes it will but overall it sounds like it will move but doesn’t. Did you have issues like that?
Mine will give me an issue going back sometimes. The motor gm sells as part of the whole seat track assembly. I did know a guy that took his part and rebuilt the motors. But I will eventually replace the seat track
What did you use initially to stop the crack from spreading?
BEFORE INSTALLING THE COVER I USED A ISULATION TAPE LIKE DYNOMAT.. THANKS FOR WATCHING.
I have a 2012 GMC 2500hd and yes my dash is cracked all to hell. I will be buying the dash cover like yours. I have just one question. You covered up the center speaker. That center speaker has a removable cover. My center speaker has loosened up twice. I have to take the speaker cover out to retighten the speaker. Otherwise the noise from the speaker is horrible, even on a smooth road. Does that company make a dash cover that allows for access to the center dash speaker?
My dash cover does have holes for the center speaker but it doesn’t have an easy access
@@an_auto_addiction5742 I guess I would have to make a template. Cut out the holes so I have access. No big deal. I just don't know why they don't have one to match exactly. Oh well.
Thanks!!!
I gotta get one for my 2009 Denali
Loso LEO for sure worth the money. Thanks for watching my channel
Can you just install without the defroster vent cover since you’re putting on a 1 piece cover?
Bass Tech the only thing I can think of is then you would have a gap between the vent and the one piece panel for the defrost. Hope this helps
Looks good! how did you repair the cracks? I want to try that first. Mine is cracked and the middle of the dash flaps around and makes a super annoying sound....
I have a 2011 Avalanche with the cracked dash, I used the resin and hardener from a fiberglass body repair kit to fill the cracks, then sanded a bit and touched it up with some paint, doesn't look the best, but it stopped the rattling from the cracks, and would be a good first step before using one of the dash skins.
@@Artseventy6 I'll have to try that, thanks!
I was wondering how is that dash skin holding up after a year? I need to do that to mine but was wondering that it looks like after a year
So far so good man check out my wheel bearing video I do a product update on it thanks for checking out my channel
Will the old dash continue to crack underneath the cover?
6ix set I have not had an issue so far. The overlay dash helps to keep it from happening. Thanks
Same exact crack on my 2008 Tahoe
What happens if you need to take apart the dash? Will you have access to the screws with the cover on?
I had to on my truck. I just used a hair dryer to heat it up and was able to get it off then cleaned the glue and reattached it
Bro. My Tahoe has cracks at the same exact spots!!
Thanks
Does it come with a piece for the passanger air bag cover?
mazdamike no the passenger airbag just has a dip. But still looks great
What Glue did you use couldn’t see in the video I’m getting mine in the mail
it comes with the glue, you probably already got yours, sorry been crazy busy, thanks for watching my channel
What happens if you have to remove the cluster now? Does this cover the top of it?
the glue is a silicone so can peel it up with a little work. hope this helps and hopefully you dont have to , thanks for watching
I need this asap
What is the name of that intro song?
Defentily should have been recalled, my 2009 & 2012 vehicles were apparently made from recycle milk jugs also
I never thought of that but you are probably right.
What does the evaporator do and why does it have to be replaced???
My evaporator was leaking it is what brings the cold air in for the A/c
Where did you order the dash replacement?
I have a link in the description. It will take you right to the Site. I hope this helps. Thanks for watching
Hmmm should be reliable for these cracked dash I bought my 2014 Denali used a year ago I paid 35,000 for it and don’t appreciate having to drive around with my dash looking awful I work hard to keep my truck looking good
A year later, how is it still holding? Are you still happy with the results?
Dash is holding up great. No new noises. And no cracks or anything. Been working great. Thanks for watching my channel
WARNING: I installed a Dashskin about 12 months ago in my 2014 Yukon. The original dash was really FUBAR and I had to put some real work into firming up the remains of the old dash around the speaker before gluing down the Dashskin. Last week I received a recall notice from GM that the passenger airbag needed to be replaced. My GMC dealer says they will have to pull off the Dashskin in order to replace the faulty airbag. Also the entire wood grain front panels and other dashboard elements must also be taken off in order to remove bolts that secure the airbag in place. So, since dealers feel no obligation to preserve or replace owner-installed third party components, and given it is well glued down, all agree the Dashskin will likely be broken, as well as the underlying fixes to the original dash damage. In that case, I would wind up with a new airbag but also be left with an unsightly and further deteriorated and damaged original dashboard. The dealer has very kindly provided me an estimate of $1,300 to install a brand new dashboard as they put things back together after installing the new airbag. Isn't that nice of them? Since this is a nationwide recall how many more owners will face varying versions of this costly situation?
@@OleHippy my 13 Sierra had zero cracks in the dash when I took it in for the airbag recall and now it has a crack above the top left corner of the airbag.
@@kenaldrich1117 I’ve gotten updated pricing from the dealer - it gets worse. Now they won’t remove the Dashskin - don’t want “the liability”. So, I have to prize it off all the glue spots myself. Even if I pay for a new Dashskin they won’t install it - “the liability”. What remains of the original cracked dash will have to come off to do the deed, again, they will maybe reinstall all the pieces but there’s “the liability”. I told them I would bite the bullet and pay for a new GMC dash to go back on after the sir bag swap. (The vehicle is otherwise pristine snd worth more than I paid for it two years ago as a used Denali.) Get this - GM is stopping manufacture of new dashes any time now. May already have. Only hope is to order from existing NOS still in the system. Nearest source is in California, maybe one left. “Better order now, if this is what you want to do.” Now $800 for the parts. Everything on the truck’s dashboard has to be removed: all trim, Infotainment Center, controls, all the color trim. Then reassembled after the new bag installed. They showed me the parts explosion. Most likely a whole day to do. $1,000 labor. By the time it’s all done, maybe a $2,000 dollar job (of course, air bag parts & labor free). But I better move quickly while new dash kits are available. Today I ordered the kit. I’m so mad I could just spit!
@@kenaldrich1117 took my 11 Silverado LTZ in for airbag recall 2 months ago and just noticed I have a crack on the left side of dash behind steering wheel. Dash was pristine before this when I applied protectant a few months ago but just noticed it so I'm sure they will not take accountability for it. We'll soon find out.
I have 2011 Yukon Denali It has cracks in the dashboard but it’s my least problems it has a lot of problems each time I fix something new problem appears every 4 to 6 months I have to fix something know the engine light appearing went for the dealership and they said nothing wrong gust ignore it I spent around 17000$ repairing this car I had enough I am selling it but it had to visit the mechanic and I am waiting for the repair coast I am buying Toyota
Man I understand that. Have replace a ton of stuff on mine. Bout fox as I go. Newer SUV prices are crazy high
We have a Chevy Tahoe in our dashboard looks like the one in the Video where can order it from.
It’s a 2011 Lte
I have a link to the site in the description. Then just plug in your vehicle and options.
It's nice but i don't see having that on. Incase if you need to replace your radio antenna you have to remove the defrost dash. And that does not come with 2 pieces
it is just one piece , I understand what you are saying, I replaced my Evaporator before putting it on, I figure if I have to take it off and it breaks ill buy another one. thanks for watching.
So with the one piece dash cover which also covers the separate dash thats against the windshield...if the ambient temperature sensor on the dash ever needs replacing, how will you gain access the the wire connected to the sensor to disconnect it in case you need to place it?
Jack it’s a silicone based glue so would be able to get it off. If your sensor is real old you can replace it before you install the dash cover , I guess. Good to think ahead. Mine had a evaporator leaking so I had to bite the bullet and replace it before the dash cover. Thanks for watching. Good question
Yup, crack in the same place on my 2008 Tahoe.
Is that steering wheel stock?
Yes it is
Why did you choose silicone opposed to adhesive? Silicone won't last that long in the heat.
JUST USED WHAT DASH SKINS RECOMMENDS, ALMOST 3 YEARS NO AND STILL HOLDING UP WELL. I THINK THEY USE SILICONE IN CASE YOU NEED TO REMOVE IT FOR SOMETHING.
@@an_auto_addiction5742 thanks for the update. Gonna order one
What’s name of that stuff you used on the cracks?
I used a sound deadening material . There is dynamatt or can just type sound deadening material in Amazon
I just used a sound deadening material can get it on Amazon. Figured was better then duct tape. Thanks for watching my video
👍🏾
How long does that new one last?
Have had mine on for 2.5 years now and it is still working good 👍
Liffetime guarantee