KZhead
Фильм және анимация

Cab Swapping the Forgotten Freedom Factory Rollback... It's a DISASTER!!!

Cleetus McFarland
2024 ж. 21 Ақп.
1 352 289 Рет қаралды
Жүктеу

Get a 60-day free trial at shipstation.com/cleetus Thanks to ShipStation for sponsoring the show!
Today Cleet and Squirrel went to work again on the FF Rollback. They made some serious progress getting the two cabs off the chassis, progress is looking great! They even sold the old cab to @ViceGripGarage
Everyday we're putting ONE random awesome RC Car from Horizon Hobby in an order on cleetusmcfarland.com Check it out, you may get a call!
FREEDOM FACTORY in person tickets - www.thefoat.com/freedomfactory
Our 2024 Sponsors:
www.holley.com
texas-speed.com
www.motionraceworks.com
www.nittotire.com
www.summitracing.com
heatwavevisual.com
Cleetus2 Channel - goo.gl/Ph2wyo
Holley's channel - / @placesholleypoops9094
**Social Media:
Instagram - goo.gl/LZvy5e
Facebook - goo.gl/gdwhh1

Пікірлер

  • Anyone know how much power these transmissions can hold? Also need to know what the best clutch to run is.

    @CleetusM@CleetusM2 ай бұрын

    • Order all the parts

      @BasedAndRedPilled1@BasedAndRedPilled12 ай бұрын

    • Damnit Squirrel

      @Ole_CornPop@Ole_CornPop2 ай бұрын

    • Cleetor coming and saving my boredom

      @angelenamorado6710@angelenamorado67102 ай бұрын

    • @@fast97z24 With a "B"

      @horseboyhunglow@horseboyhunglow2 ай бұрын

    • We need a Cletus and George budget build off vs James and ty

      @Goose-it@Goose-it2 ай бұрын

  • This entire episode is OSHA approved.

    @oh6vee6@oh6vee62 ай бұрын

    • Anyone in construction knows osha does not approve anything.

      @GM6.7@GM6.72 ай бұрын

    • Forklifts are the only vehicle I genuinely fear for Cleet's safety when he's behind the wheel, and I ain't even kidding. Those things will end you real quick if you f around too much and find out.

      @WestCoastWheelman@WestCoastWheelman2 ай бұрын

    • Who’s Osha, sounds like an annoying hags name.

      @Owens_Racing@Owens_Racing2 ай бұрын

    • Buhahahaha 🤣😂👌

      @zedlips@zedlips2 ай бұрын

    • Don’t be surprised when OSHA shows up and puts a cease all work order on your shop and then goes around and starts writing up anything and everything. Let’s hope not, it could get expensive. You might have to see if you can squeeze a few more bucks for that old motor from Vice Grip Garage.

      @rickbullock4331@rickbullock43312 ай бұрын

  • This NEEDS to become a regular series: Adventures with Cleeter and Squirrel

    @nathanwells7550@nathanwells75502 ай бұрын

    • Lol... sounds like a cartoon title. Perfect! 🤣

      @greenhouse3505@greenhouse35052 ай бұрын

    • 100% put it on youtube original

      @Killshots10197@Killshots101972 ай бұрын

    • "Thers yur problem right ther, she ain't got no gas!"

      @BarFlyChef@BarFlyChef2 ай бұрын

    • @Cleetus McFarland✓ For future reference on rusty bolts, Lemon Juice, Baking Soda, Vinegar, Oil, And Electricity. You are welcome.

      @BarFlyChef@BarFlyChef2 ай бұрын

    • Yes! Dumb & Dumber: Episode 2

      @PorscheSpeedster-kz6nc@PorscheSpeedster-kz6ncАй бұрын

  • I think this series has taught me that these two definitely need supervision on projects

    @laned1042@laned10422 ай бұрын

    • @Cleetus McFarland✓ For future reference on rusty bolts, Lemon Juice, Baking Soda, Vinegar, Oil, And Electricity. You are welcome.

      @BarFlyChef@BarFlyChef2 ай бұрын

  • That shifter does come out!!! And it's so easy. Lift the boot, neutral, and spin the retaining ring!!! That trans was used in big dump trucks too, thay will TAKE A BEATING!! I had one in a 383ci Snow Plow truck with posi in front and rear making around 500hp, and it took it from 1979 until I sold it last year!! Also... make life easier and get a hydraulic master and slave cyl for the clutch. One little one in the firewall, and it'll go right in. The slave is bolted to the outside of the trans. 1986-1989 years had them, but they sell everything you need at Advance Autoparts.

    @jameswiz@jameswiz2 ай бұрын

    • @cleetusmcfarland

      @tannerstorm31@tannerstorm312 ай бұрын

    • Just another day, Grifting Vice Grips for Saws-All Blades.

      @BarFlyChef@BarFlyChef2 ай бұрын

  • These longer Cleetus and George videos are top tier entertainment. Gitter done squirrel!

    @seananon4893@seananon48932 ай бұрын

  • When Derek said save the other cab after you completely destroyed it, I spit out my drink 😂

    @EGHeartattack@EGHeartattack2 ай бұрын

    • It's repairable though 😂

      @kylebeach2316@kylebeach23162 ай бұрын

    • 🤣🤣🤣

      @db_auto_photography4539@db_auto_photography45392 ай бұрын

    • Hey now, a little duct tape and bondo, she'll be good as new, son!

      @Maddoktor2@Maddoktor22 ай бұрын

    • and when he "sold" the engine to derek that shit killed me

      @justinmccourt14@justinmccourt142 ай бұрын

    • @@justinmccourt14same I’m laughing hard 😂

      @dakotareid1566@dakotareid15662 ай бұрын

  • The fact Cletus can still pull 700k views with a 50 min video says alot about how entertaining They are

    @Talywhite@Talywhite2 ай бұрын

    • A view is considered 30 sec of watchtime. Not hating! Juuuust saying! ✌🏼🦅

      @mxb2432@mxb24322 ай бұрын

    • I love these videos I get sit back after work and enjoy a show and a drink and smoke its relaxing feel good stuff

      @95jwalk@95jwalk2 ай бұрын

    • @@95jwalk Agreed.

      @MOTO809@MOTO8092 ай бұрын

    • Gotta be honest, this is one of the first ones I didn't watch. Don't really care about the truck, it's too long, seems like not much got done 🤷

      @androiduberalles@androiduberalles2 ай бұрын

    • @@androiduberallesone of the best videos in a while, sucka

      @K2489S@K2489S2 ай бұрын

  • Whole episode is pure comedy gold, after the flatbed we need another squirrel & Cleet build show

    @Polyodon@Polyodon2 ай бұрын

    • I think Madie accidentally named it *Freddy"

      @BarFlyChef@BarFlyChef2 ай бұрын

  • I just cant stop cracking up at George!! The dudes laughter and enthusiasm is electric! Hahahaha! Love you guys!

    @duke1281@duke12812 ай бұрын

    • 🎉 Freedom Factory "Freddy The Flatbed!" For when dreams of glory go wrong.

      @BarFlyChef@BarFlyChef2 ай бұрын

  • This was a fun video. You could tell ol Cleet was having fun wrenching with the boys again. It had a very early Cleetus / youtube feel. Especially cutting the bolts off the old cab. The variety of content is great and seeing these type of videos sometimes is fun.

    @egriff11@egriff112 ай бұрын

    • 🎉 Freedom Factory "Freddy The Flatbed!" For when dreams of glory go wrong.

      @BarFlyChef@BarFlyChef2 ай бұрын

    • # .97

      @BarFlyChef@BarFlyChef2 ай бұрын

  • While you are redoing the hydraulics redo ALL of the hoses. You are already down there with things apart, with hydraulic hoses its not a matter of if they will blow, its when. Replace them now and you will have years before you have to worry about that. And i mean ALL of them, it will always be the tiny hose that looks fine thats buried under everything that ends up blowing. Hauled a fertilizer/seed conveyor trailer around for a while, spent plenty of time crawling around the framework fixing hoses and the trailer was only 4 years old. Local manufacturer, we actually got prototype number 2 from that company. We changed a lot, like breaking all of the hoses up into 5' sections so we dont have to haul out and replace 20' of hose every time one blew, and making sure the connections were positioned somewhere reachable so even if the hose blew deep in the trailer you could still undo both ends fairly easily. Set up your system right from the start to save a LOT of headaches down the road.

    @SirFloofy001@SirFloofy0012 ай бұрын

  • Sam repainting a panel on his old cougar in the background!! He's gonna love that cat

    @darylp955@darylp9552 ай бұрын

  • Love the VGG references in this video and the first video. Love the Squirrel nick name. Should of listened to Dereck gas ax suggestion. Might have gone quicker but might now been able to get it into the parking lot. Love what Cleet said. "may have lost a friendship but we now have a budget." Derek might haggle with you given the deception but it will not cost the friendship. Love both of your channels. Both are a class act!!!!!

    @teresaharmon4405@teresaharmon44052 ай бұрын

  • The shifter does come out. Take a pair of pliers and push down on the tin piece at shifter base then turn like an 1/8th turn counter clockwise. Two roll pins old the tin piece in. Tin piece has littler ears and there is a spring under it that keeps tension pushing up so it stays hooked on the roll pins.

    @chrisjohnson131@chrisjohnson1312 ай бұрын

    • I hope they see this, I was going to comment this, but I see a couple guy's besides yourself that know how it comes out

      @scottgshomewrenching1352@scottgshomewrenching13522 ай бұрын

  • For future reference, I think when they said to lift with the doors shut, I think they meant to close the door on the strap, instead of putting the strap through the door. Lifting with the doors closed is generally done to prevent the “tub” from bending under its own weight, the doors help reinforce the rigidity of the cab.

    @jackmo99@jackmo992 ай бұрын

    • 100% this. Also parking brake cables are super strong when your trying to yank apart junk cars

      @nikoschopshop@nikoschopshop2 ай бұрын

  • I think this is by far the best and most relatable content I've seen in years, holy hell lol yall are amazing

    @kylewise3111@kylewise31112 ай бұрын

  • The phone conversation with Derek had me in stitches lmao

    @fredbawden1468@fredbawden14682 ай бұрын

  • We need more of these two doing builds. I havent laughed this hard in awhile. Throws the brake clean can at it like Peg would lol 😂

    @chrisomalley7502@chrisomalley75022 ай бұрын

  • I know this vid was more of a comedic way to cab swap a truck and they are more than capable of doing it correctly. But for anyone doing this: always use a lift to remove the cab and an induction heater or some heat source for the cab bolts. 👍

    @BassManBobBassCovers@BassManBobBassCovers2 ай бұрын

  • i retract my previous statement, stick a cut in half crownvic on the shorter dually frame with it closed off as a cab, keep the 6.2 in it an find or make a wrecker body for it.. have a diesel dually tow pig crown vic for the freedom factory along side the restored og flatbed, best of both worlds!

    @frostyb16@frostyb162 ай бұрын

  • Watching Cleetus & George working on this old square body is way too entertaining 😂

    @hydropole@hydropole2 ай бұрын

  • A vice grip style video with these two would be gold😂

    @michaelford7683@michaelford76832 ай бұрын

  • This is the stuff I miss with you guys. The other shop shenanigans were legendary.

    @SirGrogg@SirGrogg2 ай бұрын

  • OSHA watching this like 👁️👄👁️

    @flightTime123@flightTime1232 ай бұрын

  • George laughing behind camera the whole time is just the best 🤣

    @nicholascallahan0@nicholascallahan02 ай бұрын

  • We need weekly cleeter and squirrel 🐿️ videos! This is great content

    @briangeorge8251@briangeorge82512 ай бұрын

  • PLEASE make this a video series!!! Squirrel and Cleet Garage!

    @brycel3461@brycel34612 ай бұрын

  • DEAD!!!!!! When the ol small block fell off the forks I LITERALLY DIED! MADE MY DAY

    @ishelbygt500i@ishelbygt500i2 ай бұрын

  • Seeing the mighty Holden Ute finally on the channel and getting a new heart instead of lurking in the background makes me so happy and so proud big love from down under ❤️🇦🇺

    @mitch8479@mitch84792 ай бұрын

  • as if there wasn't enough merch ideas. please o please drop a "how about now" -squirrel shirt or hat idea. that anticipation leading up until nothing was pure comedy gold. love you guys

    @mulletmike7267@mulletmike72672 ай бұрын

  • The three guys standing there laughing is great. Nothing like watching your boss royally F something up but knowing you’ll probably have to fix it.

    @ectolle54@ectolle542 ай бұрын

  • 100% need more cleet and squirrel Projects!

    @aarynmurphy7174@aarynmurphy71742 ай бұрын

  • I love how creative your ads are! Every other youtube channel has ads that are very boring and I always end up skipping ahead to the end of the ad, but you guys actually make me want to watch the ads! Keep it up!

    @micahbusenitz@micahbusenitz2 ай бұрын

  • "It can't be tight if it's liquid, get the gas axe out" - That's good advise right there. Bring out the torch!

    @agentsmith5150@agentsmith51502 ай бұрын

  • Cleetur and squirrel, I think is my new favorite mini series 😂😂😂😂

    @norma_jeane12v28@norma_jeane12v282 ай бұрын

  • LS George n Cleeter is the BEST combo ever 🤣🤣🤣

    @MixtapeXx@MixtapeXx2 ай бұрын

  • i love the give aways! its so uplifting to see cleetus just light up and smile when hes talking to his winners. just makes you feel happy :)

    @Legendary-2024@Legendary-20242 ай бұрын

  • This is amazing content. Gives me the vibe of when the channel started.

    @KrisDelPriore@KrisDelPriore2 ай бұрын

  • Watching these two work on something is the best thing I have ever seen😂

    @ryanburke9655@ryanburke96552 ай бұрын

  • more George and Cleetus content. the chemistry and dynamic is great. easily one of my favorite vids on the channel

    @nicholas5623@nicholas56232 ай бұрын

  • Love it when you guys actually make longer videos the short videos are cool on some stuff but I like it when you guys actually do fun stuff like this takes us back to the old days

    @pagefamily8245@pagefamily82452 ай бұрын

  • @cleetus for the shifter on those 4 speed transmission if you go to where the pivot join at the bottom of the shaft. Push down and twist and lift them the shifter slides out. Found this out on my 65 Chevy c20. Quick and easy and saves you some pains

    @nickpierce8601@nickpierce86012 ай бұрын

  • This series is awesome love to see cleet get back to his grass roots pretty awesome

    @christophermendes565@christophermendes5652 ай бұрын

  • The Cleeter and Squirrel Live Action Fun Time Power Hour!!!! I freakin LOVE IT!!!!! This NEEDS to be a once a week addition to the channel! I think it will double your subscriber numbers in a matter of weeks......how many weeks I'm not too sure of butt I am sure of the hilarity that comes from it!!! So until next time.....this is Cleeter and Squirrel, done and done!

    @jeffffro7674@jeffffro76742 ай бұрын

  • My 7 year old daughter saw them lifting the engine out with the forklift and said I’ve helped do that a bunch of times daddy. It looks like the same engine. A tear came to my eye. Adventures of cleet and squirrel should be a channel on KZhead. SM465 transmission will probably be fine. If you’re just keeping it at the track it’ll probably fine. If you’re going to drive it on the highway at all an nv4500 would be better.

    @ectolle54@ectolle542 ай бұрын

  • This is some of the most glorious shade tree mechanicing I have ever witnessed on the Cleetus channel. It was superb!

    @BilletGarage@BilletGarage2 ай бұрын

  • So I worked at Pascagoula auto salvage Clet. This is how we did every truck we pulled motors out of. It's best to have a big fork lift with really big forks. We cabbed every 5.4 Ford truck. Cab bolts spin when they don't come out. We would torch them if they spun.

    @briangrider3996@briangrider39962 ай бұрын

    • Niceeee.. I lived in Grand Bay, AL for years and would pass by that salvage yard all the time when headed to college in Gautier

      @richardlandrum714@richardlandrum7142 ай бұрын

  • Finally the Holden is looking mint with the fresh Texas Speed LS installed. Really to rip some burnouts, run some times and even be a shop truck if you want.

    @GroundZer0_0@GroundZer0_02 ай бұрын

  • The team is ace , but Cleet & George together are on another level 😂😂😂😂😂

    @stuartburgess366@stuartburgess3662 ай бұрын

  • This has to be my new favorite series's on this channel! Pure gold!

    @tyhyde3023@tyhyde30232 ай бұрын

  • I love the shop shennanigans you guys are adding into the videos....It's so familiar to me and makes it even more enjoyable!

    @JessyU13@JessyU132 ай бұрын

  • "Did we damage anything?" Sam: "your're pride!" Oh that guy is a legend and one of the best additions to the team!

    @egalloe72@egalloe722 ай бұрын

  • FYI.... When you install that PTO, you have to shim it. That is done with gaskets. There is a thick and a thin gasket stack them for proper gear seating

    @donaldjrchappell6800@donaldjrchappell68002 ай бұрын

  • These videos are what we needed! Cleet and Squirrel on the job. LFG. Highly anticipated

    @jessebrassard6955@jessebrassard69552 ай бұрын

  • Done dozens of cab swaps. Always used a two post lift. First to pick it up and remove the transmission and disconnect everything, then set it down, pull the front clip off and position the pads under the rockers and lift the cab. Roll old chassis out and roll new one under. We built a metal box with wheels on it the same size as the roll deck that we used as a makeshift dump truck bed. Loving the content. This was a lot of cringe to watch, and I think sometimes you do that on purpose!

    @CH3NO2Semonious@CH3NO2Semonious2 ай бұрын

    • Yes, it is cringy because they have money to do a decent hot rod ramp truck and parts are easy to find for square bodies. I have a 79 C20 that I have done everything you can think of to and upgraded with great parts probably an easy $7k into the 406 forged and full roller engine, built th400, gear vendors overdrive, disc brakes, factory ac that works great, stereo, you name it. My other one is an 88 K5 Blazer. My trucks are restomods but even if they took the easy route and properly cleaned and painted the frame and built up with decent parts, it could be a very nice and usable truck. This video was too much like the few I have seen from whistlindiesel.

      @CGT80@CGT802 ай бұрын

    • Is there a reason you take the transmission out? I always just take the shifter off or make it go down with the shift boot, but I've only done a couple.

      @leviduff2740@leviduff27402 ай бұрын

    • I like to go through the transmission while it's easy to get to. (Unless it's a truck I'm familiar with and know it's okay inside.)

      @CH3NO2Semonious@CH3NO2Semonious2 ай бұрын

  • the ship-station commercials are so cheesy gotta love 'em! HAHA! Hell Yeah Brother!

    @_xPaPaDx@_xPaPaDx2 ай бұрын

  • Literally the best crew on KZhead.

    @Randybobandyandy@Randybobandyandy2 ай бұрын

  • Pls more videos like this. It reminds me of when i was a kid watching u work on ur cars in the driveway:)

    @devynkopulos1058@devynkopulos10582 ай бұрын

  • *_45:01_**_ 😅🤣🤣🤣🤣"Ohhhh, could play the guitar on that baaaaby!!!" ""OHHHH, Thought that was a Rattlesnake!!!"_*

    @SOMNIOHM@SOMNIOHM2 ай бұрын

  • Lil nervous seeing a 50 min video but hard laughs the ENTIRE video! Love seeing you guys goof off

    @miketech2@miketech22 ай бұрын

  • I must say I am in love with what is going on. Right now. The "a team" doing cleatus of new stuff and the "b team" doing cleatus of old. Don't get me wrong I love where this channel has gone but of course sometimes I miss the old school junk yard cars jerryriggin days.. But getting both.. is a dream. Please keep it up!

    @clayolson8606@clayolson86062 ай бұрын

  • 50 mins of freedom brother Let’s Go!!🏁🦅🦅

    @nightcrawlerc9842@nightcrawlerc98422 ай бұрын

  • Ole Jorge out here touched a bolt broke a bolt, left grill exactly where it fell, cant bother myself im ovr here cordin. that boy out here 2puttin greens hittin par for course. watch out boys!!

    @crunchythedave@crunchythedave2 ай бұрын

  • Cleet, George and VGG- the collab we're all waiting for!!!

    @austinrhodes5885@austinrhodes58852 ай бұрын

  • i like the use of the forklift to test the tensile strength of everything you forgot to disconnect as opposed to an engine hoist. that's not something you can teach and the sign of a true professional

    @CamK13@CamK132 ай бұрын

  • Gloria is the perfect name for the tow rig 😂

    @evangiek6112@evangiek61122 ай бұрын

  • I don’t usually laugh out loud when watching stuff but this series is absolute gold

    @zakikahl6904@zakikahl69042 ай бұрын

  • I’m not gonna lie these past two episodes have been too good who could complain about 50 minutes of sick mechanics and busting each others balls I love it

    @sidthesloth6940@sidthesloth69402 ай бұрын

  • Cleetus and George please put some ear pro on when using the hammer gun and saw! That stuff is loud and we need you to be able to hear when you are older

    @GeneralMills66@GeneralMills662 ай бұрын

  • 26:03 use the cab for the Best Seats In The house and prop it up to see the race race and put ac and food and drink holders;)

    @mikeplynch1@mikeplynch12 ай бұрын

    • Could do giveaways to sit In the cab

      @nickcollins1528@nickcollins15282 ай бұрын

  • Cleet and George have a great friendship!

    @yokdriverchris@yokdriverchris2 ай бұрын

  • man if cleetus and george wasnt super busy id love to see these two go out and try to do revive and drives, give cleetus a chance to show he knows what he's doing😎👍

    @xOhSo@xOhSo2 ай бұрын

  • Every darn time Brent comes into the shot smiling from Ear to Ear Its infectious!

    @BRISTOL47@BRISTOL472 ай бұрын

  • One of the best pre-video advertisements for Ship Station of all time. Great job George!

    @krismueller7843@krismueller78432 ай бұрын

  • Man what would we all do without your channel! Love this new cleeter squirrel content 😂

    @nolanbillings8426@nolanbillings84262 ай бұрын

  • I would pay good $$$ to watch cleeter and george do roadkill / VGG style rescues!

    @spyem1@spyem12 ай бұрын

  • "We could sawzall it" "I don't wanna go under it" You know they have those extendable chainsaws right? Just a thought.

    @ryancleaver6613@ryancleaver66132 ай бұрын

  • Best part is, the Holden Commodore thunder, comes with an LS1 factory. Just hit us Aussies up and grab everything you could need.

    @Brendanlauricella@Brendanlauricella2 ай бұрын

  • Use a two post lift and strap the cab down using tie downs, then just drive the frame up under the cab on the lift and lower it down onto the mounts. 23:31

    @matthewfarha7133@matthewfarha71332 ай бұрын

    • 32:48 should’ve pulled it into the shop and used the lifts

      @matthewfarha7133@matthewfarha71332 ай бұрын

  • I use the Yukon with the doors at work. I keep my mini fridge, microwave and tools in it for work. And I have the 9 drawer sitting next to my us general box at home to hold all my box kits.

    @mkuhlman77@mkuhlman772 ай бұрын

  • You guys really aughta drill a 1 1/4” hole in the ends of each fork and get some tapered pins for them so when you are picking up slung loads, you can be sure it won’t slide off the end. You can also throw a to ball on each fork through that hole for moving trailers easily.

    @ThatOneGuySometime@ThatOneGuySometimeАй бұрын

  • "Yeah, I'll bring it back down a little bit." Good job squirrel, good lookin out for cleet.

    @ericfarrar6607@ericfarrar66072 ай бұрын

  • The transmission is a SM465 and there damn near bullet proof. The shift lever comes off super easy you just push down on the cup and turn it a quarter turn to dissengage it from the roll pins on top of the shift plate.

    @user-op9pm6cg4i@user-op9pm6cg4i2 ай бұрын

  • My favorite part of this video is when you switch from the impact to the Saw 🤣🤣

    @ohnorickyo@ohnorickyo2 ай бұрын

  • He definitely needs to set aside a day where him and George do a small resto series. I was dieing the entire time. 😂😂😂

    @keystoneangler3217@keystoneangler32172 ай бұрын

    • This is my 3rd time watching

      @keystoneangler3217@keystoneangler32172 ай бұрын

  • This build is sick. I love ramp trucks and rollbacks

    @sinistervulcan@sinistervulcan2 ай бұрын

  • The more I see Cleetus turn wrenches, the more I think he's a great driver. Aaaaand hello George!

    @user-us9jn9pr2r@user-us9jn9pr2r2 ай бұрын

  • The induction heater nut buster works wonders on cab bolts. Or the pneumatic torque multiplier ease them right out.

    @justinevans5569@justinevans55692 ай бұрын

  • George absolutely loves his job you can hear it in his laughs

    @wesleydruga6822@wesleydruga68222 ай бұрын

  • That white cab interior is more mint than some restos I've seen 😂

    @jamesirwin-mcconnell4669@jamesirwin-mcconnell46692 ай бұрын

  • George is having so much fun. Pretty sure he gets younger every day

    @LeviGarrett_@LeviGarrett_2 ай бұрын

  • The Holden Ute, you can use a Pontiac GTO dash and convert it to right-hand drive, would be the first in the world. see Flying sparks Garage for their GTO same specs Roxy, when your done thank me and send a container of GTOS haha

    @Kim-cz4yr@Kim-cz4yr2 ай бұрын

  • I use to build tanker trucks. I would just move the axle and stretch the frame on the good one. Much easier. Love the content no matter what. Keep it up

    @kurtkurtis2982@kurtkurtis29822 ай бұрын

  • I love these type of videos! Need more of it!

    @kaylendunagan1695@kaylendunagan16952 ай бұрын

  • Should definitely do a full resto on the truck with new hardware and power coating all the suspension components so it’s clean and rust free if you don’t plan on that already

    @christ.5323@christ.53232 ай бұрын

  • I love the papa John’s on top of the forklift 😂😂😂

    @WETHINKTOOMUCH555@WETHINKTOOMUCH5552 ай бұрын

  • Cleet and George are absolute menaces 😂😂

    @RockJenks@RockJenks2 ай бұрын

  • Hey cleeter mcskeeter the transmission in both trucks is an sm465 and the shifters do in fact come out. Right at the base of the shifter there is a ring that you twist with a pair of channel locks and then it will release the shifter they are probably covered in grease so it may be hard to see

    @chriswright9659@chriswright96592 ай бұрын

  • I love seeing Cletus back to is routes when he first created this character 🤘

    @Hellionzk@Hellionzk2 ай бұрын
KZhead