Quonset Hut Utility Room | Electrical Rough-In, Vents & Installing Doors
We build a small utility room for our workshop and prepare the building for our diesel generator and coal stove. After installing wall thimbles and louver vents we tackle the electrical wiring on the front of the building and finish with hanging our three doors. There is more to be done prior to spray foam but this was a great start!
We appreciate you tagging along for our Alaskan adventure 😀
Thank you for watching and supporting our channel! 💙
- Eric & Arielle
Music by Epidemic Sound:
Drop World - Pearce Roswell
All Is Said and Done (Instrumental Version) - Gamma Skies
(っ◔◡◔)っ ♥ 𝐒𝐡𝐨𝐩 𝐨𝐮𝐫 𝐄𝐭𝐬𝐲 𝐬𝐭𝐨𝐫𝐞 𝐟𝐨𝐫 𝐜𝐮𝐬𝐭𝐨𝐦 𝐓𝐢𝐞 𝐃𝐲𝐞 𝐒𝐢𝐦𝐩𝐥𝐞 𝐋𝐢𝐯𝐢𝐧𝐠 𝐀𝐥𝐚𝐬𝐤𝐚 𝐦𝐞𝐫𝐜𝐡𝐚𝐧𝐝𝐢𝐬𝐞: ♥ www.etsy.com/shop/SimpleLivin...
Visit our Amazon store to see the products we use and recommend:
www.amazon.com/shop/simpleliv...
Our Amazon affiliate link if you wish to support our channel: amzn.to/2Xi9CvE
Products shown in this video:
Canon R6 Camera: amzn.to/45HTW4c
Ridgid Circular Saw: amzn.to/3MNikL9
Ridgid Jig Saw: amzn.to/3MJxOzt
Kinco Women's Gloves: amzn.to/3s4RMxH
Carhartt Overalls: amzn.to/43R07CY
Milwaukee 13-1 Screwdriver: amzn.to/3W1NCDc
Olight Headlamp: amzn.to/441IrFu
Don't want to miss an episode? You can 🅢🅤🅑🅢🅒🅡🅘🅑🅔 here: / simplelivingalaska
Our most popular playlist: • Eggs Benedict on the F...
𝐌𝐨𝐫𝐞 𝐅𝐫𝐨𝐦 𝐒𝐢𝐦𝐩𝐥𝐞 𝐋𝐢𝐯𝐢𝐧𝐠 𝐀𝐥𝐚𝐬𝐤𝐚 -
𝐹𝑎𝑐𝑒𝑏𝑜𝑜𝑘: / simplelivingalaska
𝐼𝑛𝑠𝑡𝑎𝑔𝑟𝑎𝑚: / simplelivingalaska
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Eric’s never ending talents are awesome, is there anything he CAN’T do? He cooks, he fishes, he drives, he builds, he cuts lumber I mean Ariel you seriously are a VERY lucky lady to have such a capable husband. And he never seems to run out of energy either. I think the two of you together are amazing: Ariel the grower, the gardener, the canner, the bread maker, you too are brilliant and so enjoyable to watch. Well done and please, keep the videos coming. Stay safe xx
And I would add that he doesn't patronize you and isn't threatened by your competence. You both seem to respect and empower one another and work together as an extremely capable team. Lastly, I would also add that in addition to what you're listing as her gifts/strengths, Ariel is an outstanding photographer/cinematographer AND video editor/producer, which is likely the source of all of their current income. The bottom line is that between the two of you, there doesn't seem to be anything you two can't do! Super impressed. Congratulations on getting so much done and done well!
Airplane next.
you should also mention in Ariel’s accomplishments that she is a pretty mean tractor operator !
I gotta wonder how much time they spent taking classes, or learning from some expert nobody knew was an expert. Classes on butchery? On canning? How to build X, Y, or Z? I particularly like that there is what he knows, what she knows, and what they both know.
And Boy, can he eat.😂😂😂♥️🧓😘
Been waiting 4 years for the electrical shirt explanation! My inner curious cat is contentedly licking herself! :)
Wow! Nice to know I wasn’t the only one wondering…I kinda assumed Eric used to work for that company. Clearly he’s got mad skills not only electrical but in “this-needs-done-let’s-figure-out-how-to get-it-done” skills! Thanks for commenting. I love this channel ❤
The armour for the exhaust fan cable should be taken through the stud and secured to the box. The bare copper wire (bond wire) should be attached to the armour to provide a ground connection for the exhaust fan. Changing the plastic box with a metal box will make the bond wire connection to the armour much easier. Two bare wires should never be installed as you are doing in the video. This advise is to be considered constructive as I am the electrician and you are learning. Love your video's.
Remember your outside plugs .Nice work.
15 years as an electrician. Thanks for putting the connectors on the metal boxes. Also please change the vent fan electrical box from plastic to metal I'm twitching over here that metal MC wire from the fan needs to be put into a metal box to continue the ground slash bonding. You could probably keep going with your strut and EMT. Just put a nut then a washer then the strut then a washer than a nut on your threaded rod. You should probably do this anyways because it will not stay tight against the foam. I believe you could get away with only six lights total those High bays are very bright good choice but the more light the better. If you wanted to dim the purple and gray would require wires back to the switch and you would need a 0 to 10 volt switch dimming switch the lights are still 120 volt but the dimming circuit is 0 to 10 volt. Looking forward to more videos thanks
Congrats on adding the cable clamps! Good move.
I'm an electrical engineer and see some problems with your design. Grounding is a very critical item. All metal boxes, power panel, building metal structure requires a grounding system. I recommend following the Alaska electrical code as it is the only protection for shock. The ground system enables circuit breaker faults to ground which protects your from a short to the building or metal devices. I don't want you hurt and 3 wire romex is the better choice for electrical wiring as it provides a fault path in the case of short circuits. Regards, Ron Conway
I assumed he used 12-2 with ground. I agree for plastic boxes have ground.
it's 12/2 with ground. He's going to be fine. Well, as long as he hooks up the grounds at each junction lol.
This is an example of why “engineers” should have experience in the field before going to the office for design work. 12/2 romex has 2 current carrying conductors (hot and neutral) plus a grounding wire.
In my building experience I've found that you can't put in too many outlets - including the utility room! This one of my favorite channels. Really amazing drone views of Alaska, cooking is fantastic, construction, butchering, fishing and everything else you do is so well explained. Always look forward to the next episode. Thanks so much Eric & Arielle!
Drone footage is always amazing!✌️
We bought a newly built house last fall and found that the basement only had one outlet and the lights on a pull chain.....in a $500,000 house. The first thing my husband did was install more outlets in the basement. You can never have too many and it is easier to install them in the construction stage rather than after drywall and insulation is complete.
I second that! Outlets are the most important things at this stage, maybe considering some more switches, too, at both sides of the building and at the work bench area.
You are both of you incredibly competent at what you do., this is a huge project to create, never mind actually to do it all. What skills you have! Brilliantly explained, photography is awesome as ever (I love the shots through the stove thimble), and so competently accomplished.
According to my local building codes in California, we need to have wall outlets every four feet. Thus, about 8 plugs for a 10' x 10' room.
Suggestion: Please check with your electrician friend to ensure that #12 wire will work for the long power runs across the shop. I've worked large commercial buildings and we often ran #10 wire across the building to the junction box then used #12 to run from the junction box to the outlets. There are tables that will tell you size of wiring for distance and well as current & voltage. I do enjoy watching your progress and don't want you to have issues with a power feed that heats up because it doesn't have the cushion capacity for the distance you're running.
True. Used to have customers return air compr🤣essors because they tried to run them on 100' of 14ga extension cords.
Its called "Uglys National Electric Code" reference book...
Would have done one 10 or 2*12 if i allready had a 12 for the conduits… also for the crazy nice main light in the roof i would run 2 cables for half of the light each and 2 switches, this will be a showroom with 12x160watts of LED lights, probably not needed all the time.. it were dims in the light but i would still split them up.
I think he’s using the generator to charge his batteries? If so it’s all low voltage dc , to large of a wire will cause a resistance problem, I’m not sure about putting a switch onto a motion activated circuit?that manual switch will be good for the exhaust fan?
@@jerryprewett5294 Batteries are storing DC but being fed into an inverter to output AC power. There is no low voltage wiring in that building nor are there low voltage lights.
The only channel that makes me put my cross stitch down for the night ♥️🇬🇧
Riiight? 😊
Bless you, that is serious!
& that takes effort….I lose count crocheting the same hat I’ve made 100s of times…. This show is swesome
They are both multi talented and should be held up as prime examples of how to live life
The metal case of the wire on the fan is supposed to terminate in the box with the romex so in case the wire overloads it doesn't burn down the building.
Also need to be in a metal box to ground the unit thru the wire armor.
I have over 50 years of experience in the electrical industry. You have made most of the changes that I would have suggested. I'm waiting to see what kind of outside lights that you are installing. Most lights are installed onto round or octagon boxes, not switch boxes. It's a good idea to have each side of lights on separate circuits. That way you can add more lights if needed and not worry about overloading the circuits. Also I only install six 120 volt receptacles per circuit. Always install plenty of 120 volt receptacles and some 240 volt receptacles if you have have 240 volt equipment. I am impressed with Arielle and your abilitie and work ethics. Great work and great video. 😊
Ya I was scratching my head when you used remodel boxes instead of round boxes for the lights.
This old dog isn't too old to learn new tricks from a younger dog.
Another suggestion….My husband is an electrician and said you should use 3/4” EMT conduit on your outer walls because if you ever want to add any wire for anything it would give you plenty of room to pull your wire. He said you want to also use jam nuts on the threaded rod so it will tighten in and not get loose.
When you built that outhouse at your old property, I thought that was amazing. But now I have run out of words to describe how stellar this workshop workmanship is. Well done O'Alaska Wonders.
I agree, it's mind boggling. Great teamwork!
0:46 nothing more satisfying than sitting on top of something you built.
You may want to reconsider adding a dimmer to the high-bay lights. They will draw nearly 2000 watts on their own with is 25% of the generator capacity. Either that or split your circuits into 4 zones and only turn on the lights you need. Looks great though!
Came here to say the same thing. Better to zone the lights than use dimming.
Eric you are one amazing guy your hidden talents are unbelievable I have never seen anyone with so much enthusiasm and determination to make all your dreams happen. With your amazing wife at your side you are an extraordinary couple. I can’t thank y’all for sharing your amazing life and journey with us. Love ❤y’all!
Omgosh! From watching you guys pouring the concrete for this to now is absolutely mind blowing!
I enjoy watching you both work together on these projects. You are always organized and your projects are well thought out. Well done!
You two work so hard! Your videos are always very interesting! I'm 80 and you are living the life I wish I had .
Ditto I'm 75 lots of heart problems in the last 20 years.
I really like your guys set up. Those plastic pop in boxes you used for your outdoor lighting, you might want to frame around them and use nail in boxes. I wouldn't rely on those plastic ears at minus 30 degrees. If they shatter as must plastic does, your lights will be hanging and will be a night mare to replace later.
I never tire of watching you two build stuff! And, with the acreage you have there, surely you’ll always be building or renovating something! Maybe consider breaking up the main lights into 4 circuits, so you have the option of lighting just the area you’re working in? The shop is AMAZING! 🙌 👏👏
Oh wow, you got so much done! Eric's scandalised face when the tape measure fell down was hilarious 😂 I'm glad you decided to have multiple circuits for your lights, that will give you fewer headaches if anything fails later on and you need to figure out what the heck is broken. Always fun to see you having fun and making progress!
Can you 2 believe ALL that you have constructed????‼️You are definitely the KING and QUEEN of DIY👍😊‼️
The shadow puppetry cracked me up totally!!! You two are the best!! Thanks for a great video.
Yes and the she's keeping me captive (in the submarine) feeding me bread! haaa they are the best!
But, but, you had the T-shirt! 😉😉
I'm shocked to know that Eric was NOT an electrician before!!
😲 Thought he had been.
So was I! I actually thought he was an Electrician, Plumber, Builder, you name it. He does everything.
I'm pretty sure he is an electrician and mentioned it many videos before.
@@annaschmanna1 He just said in the video that he is not.
yeah the shirts were just his friends, got me too lol
I really like the threaded rods idea for running your conduit and such. What a versatile convenience that is! I'm happy to see it's still like a nice community here where people offer good advice and experiences.
Also might want to put 2-3/4” conduit spacers between your threaded rod and the strut before foam so you don’t crush foam and have a solid foundation for your strut. Sorry for all the comments commenting as I watch. Love you guys and the channel thanks as always.
Ariel is the best apprentice/wife a man could ask for. This lady has skills. Nice shop.
What CANT you two do? Absolutely amazing your talent and skills,down to your cinematography and photos, blows my mind❤
Talented is an understatement!
The way Eric was looking at the drill bit was pure love ❤😂. Your both amazing at anything you do 👏👏👏👏👏
Study up a bit on the exhaust and supply air in your little mechanical room. What kind of heat or boiler are you going to install? I'm not sure your gen. radiator fan will exhaust air. A radiator fan draws fresh air through the radiator. The louvers won't open. They will be suctioned into a closed position.
I'm glad to see that everything is going well with the quonset hut especially on the inside and it is looking awesome with the utility room and can't wait to see it when it is finished but until then take care and have a wonderful week thanks.🇺🇸🌨️🌨️🇺🇸
Looking good guys!! Setting up a shop is exciting! ERIC: Suggestion, install at least 1 if not 2 ceiling fans to blow the heat down and circulate the air from the ceiling down to the floor. This will help thaw out your vehicles and dry up your floor twice as fast in the winter. Put them both on rheostats so you can control the fan speed! Keep up the good work! 👍🏻👍🏻👍🏻
It's a real pleasure to watch the two of you work together. I never doubt that Eric has done a thorough job researching the project. He's a wonderful craftsman and puts safety first. Ariel is a fantastic assistant which creates a great team. They excel at homesteading!!😊💗🇨🇦
The Dynamic Duo , builders, planters, Cooks , Fishing and loves life together🙏😁👍🎖️🎖️
when you show a shot of the inside of the Quonset hut, my thoughts are (even though I watched you construct it) how in the world did you two put that thing together?? To me it’s an unbelievable feat. Kudos to you both. 🥰👍
It brings me so much joy to watch you twos dreams unfold! Such incredibly hard workers, kind hearted, and intelligent people you are! Eric I hope you know how lucky you are to have a lady like Ariel at your side! You two are such a blessing to us all! I pray the lord continues to bless the both of you and he continues to bless all of us viewers by allowing you two to keep documenting your dreams becoming reality for us! Thank you ! Your videos are the highlight of my week! No channel comes in even close to your level of captivating content!!
Ariel and Eric , you two are marvelously made and one of a kind. Peace and Blessings 🙏
Hands down the best KZhead channel. Thanks you two for always helping me frog off my own projects to watch you do yours!!
Good evening from Syracuse NY everyone thank you for sharing your adventures in life
The Radiator fan on your generator sucks air from the outside to cool the coolant, it doesn't blow the hot air through the Radiator fins. I love watching you guys build your home.
So the lovers are backwards correct? I was thinking the same it should suck air in.
Agreed
Yeah was just going to write this. Fresh cool air in through the radiator fins. So fan sucks into the building which would shut the louvres and prevent air from entering the building. So the louvres are backwards for the needed air direction. But then you are also pulling freezing air into that little room that contains all your radiant piping and other things you might not want to risking freezing. So think about your design knowing that - set up correctly - cold possibly freezing air will come into the room when the generator is running. You want to make sure temp will not be a problem.
Also, is it really needed? I am thinking about -50 degree air being sucked into the building may end up cooling more than just the engine. I also wonder if it would be wise to put the diesel fuel tank inside out of those temps..
Agreed should have one in the metal door as well for boiler heat . That needs fresh air as well . Or that louver should be twice as big and is faced the wrong direction regardless. Need fresh air intake for generator and boiler and imagine the inverter electrical stuff needs air cooling as well
I still say, YOU TWO ARE ABSOLUTELY AWESOME!!!👏👏👏
Heck of a nice shop
Hi y’all 😊👍🏼
It sure is!
The way you attached the unitsrut to the building is fantastic and multifunctional. Just a suggestion you might want to add another circuit for the shop lights. As I remember you were only allowed 1800 hundred watts on a 12 gauge wire with a 20 amp circuit. Again thanks for sharing.
Close, it is 1,920 watts. Max of 80% FLA of breaker = 16 amps. 16a * 120v = 1,920w
80 percent, which for a 20 amp circuit is 16 amps
The dynamic duo at it again! 🙌⭐️⭐️⭐️⭐️⭐️💯
I have watched all your videos but I would like to say your preproduction homework really shows lately!!😊
We have watched your channel and adventures for a very long time and enjoy it a lot. I did notice as did others that you didn't use a metal box to connect the wall fan using a clamp to bond the metal-clad wires to the box. Also, need to bond the metal boxes to ground with a ground wire attached to the box.
It's amazing how big the Quonset hut still looks even after you've closed it in and added the utility room. I'm sure you really enjoy it
Looking soooo good! I can't believe you have gotten this far with the quonset building. Your almost done. I hope you celebrate when it's finished. For those that thought Eric was an electrrician, watch their older videos and you will find out. I am amazed at the many things he can do. Thank goodness for Mr. Google Pants! Reading up on how to do things is always a big help, not to menntion he's a natural at so many things. Also they have amazing team work doing things together. I just hope you don't move from this place after just a few years with all the work you've put into this. Kudos to you both! Love, from Western, N.Y.
They will have another pizza!
Eric can do just about anything!!!!! Sure saves them a lot of money!!!!! 💕💕💕
Your QH is going to be an extension of your home, it's great now and will be greater when it's finished. When I hear people say they can't because they don't know how to do things you don't let that hold you back. You're a great example on many levels. (no pun intended lol) Sense of humor is not lacking in your neck of the woods .
Lucky you guys work so hard or it would be impossible to sleep at night with everything you have to schedule, learn and implement. I am always incredibly impressed by what you both achieve - let alone in such challenging conditions. You guys are so inspirational. 🎉
Lots of well deserved comments for Eric's skills. I whole heartedly agree. How many men though have wives who are also skilled co-workers? Good for you Arielle!
You're a brave man showing electrical work with all the youtube electricians.
For those thinking to run a chimney pipe horizontally, if you want it to be perfectly horizontal, it's best to limit that to a very short distance--out through a wall is perfectly fine, for example. but for much longer distances, you don't want the air to stall in the pipe, or even backdraft. It's best to give it at the very least a slight pitch or rise upward to help guide the hot gasses and smoke move further up and out of the chimney, since they'll lose heat (and thus movement energy) radiantly as the hot gasses travel. The colder the smoke is (comparatively), the more likely it will cause soot buildups, etc. I'd recommend looking up builds for rocket mass heaters with benches, because those benches have to keep the heat moving along their length, and often have recommended elevation changes. (Also definitely include ways to access all sections of the pipe for proper cleanouts!)
Armor cable covering exh. Fan wires has to be inside j-box
Lighting in the shop. Some higher up, some at about shoulder height. You get a more even spread of light in all areas. Power outlets. Think of how many you need - then add in 50% more! "Generator Room". I'd suggest having an openable/closeable venteither in the door or in the wall. The genny will need a good supply of air to allow it to run properly, and if God forbid there's ever a fire in there, you can close the vent as the very first thing. That shop is going to be fantastic with the underfloor heating and spray foam insulation, great to work in even in the coldest weather, and your vehicles/machinery will have a warm, dry environment, so that's another plus. Another great slice of Alaskan living!
When you cut threaded rod,wind a nut past the point of cutting then cut and wine back the nut off the end and it will automatically fix the end of the thread that you cut. Great video as usual gang. Regards from Australia 🦘🦘
I'm not going to ask you how all of that stuff will fit into the generator room. I'm just gonna wait and see. I know y'all have a plan and you WILL make it work. You always do!!
Love your videos. I noticed an issue (unless I just can't see) with the door jamb at the 41-minute mark. If the deadbolt doesn't go into the framing, or at least a large striker plate with screws going into the framing, one strong kick or push of a bear and the door jamb is done. :)
Ok how do you know a channel is a good one? When your viewer is so engaged in watching the video that when it gets to the end they go "awwe no" well thats us everytime. Im wanting more. You guys are awsome, hubby and I love watching you together. Blessings The Stones Family in South Africa
Thanks for taking us along on the shop fit out I think you would call it well thought out on how and where to mount everything you guys are going to so enjoy having some where worm and out the weather to do projects so happy for you both just love following you along on basically you every day life its great thanks for sharing with us all Cheers
If not mistaken that fan needs grounding to a metal box that is grounded to the Romex ground wire. The flexible jacket acts as a conduit ground. Suggest putting box same side of stud as fan, let Romex run through wood and not fan jacket conduit.
WOW, My favorite couple are hard at work on Quonset Hut to bring it up to snuff. Busy as Bees they are, I wish them all the luck in the world to get the job done as they want. 😊❤❤👍👍🙏🙏As I know they will.
Living the Dream of so many, so well! Luv y'all! ❤🌈🙏🌿 ~ Blessings All ~
If you'll run a 6-8 inch channel beam down the center of the building near the ceiling and support it at each end you can have a full length monorail winch in the ceiling for motor lift or splitting the tractor for clutch replacement and other general heavy lifting chores. Being that you are a welder and all repair type of guy the monorail winch will be a lifesaver 👍
You two have the BEST toys! I think you win!!😮...🏆👋
You are doing an amazing job. I hope you are reading some of the comments. Some of the electricians have some good points. Be careful with the voltage drops with the long runs. Thanks from South Carolina. I enjoy your videos very much.
It's so big! Now that you've enclosed it and are putting in walls you can really see how much room there is in the Quonset Hut
Much love from Washington State , You folks are some legit go getter's , stay warm, Keep on keeping on...
I love following you two. The dialogue that goes along with what we are seeing is very well explained and interesting. The two of you compliment each other. Can’t wait to see the finished product.❤
Love it! Thank you so much for sharing! Really enjoyed your post! Thanks!
Eric got me Bamboozled all these years thinking he's an electrician
So much to do to get ready for the next step. You are just about a pro . Ariel , you are definitely the pro camera person, and so much more. So tell him, "It takes two Babe". See you two on your next visit. Thanks
You guys are absolutely awesome with everything you tackle♡♡♡
always enjoy your videos, hello from Vancouver Island
Hi Eric, I don't know what size diesel generator you have, but please bear in mind that you need to ensure that you have a sufficient supply of ambient air into the 'utility room' for engine cooling and combustion. Similarly, you need to ensure that the hot air off the cooling system is evacuated from the room. There are many different configurations possible. Start by ensuring that the engine is definitely going to ingest ambient air. That could mean piping/ducting air in from outside the building into the air cleaner. This is not abnormal; I used to work for a diesel engine manufacturer helping customers install engines for best performance; it's good practice. Similarly, as regards engine cooling, it's all about ventilation, you need to consider that the generator's engine needs a certain volume of ambient air per minute coming into it, and this air is going to be heated up, and it needs to be evacuated from the enclosure. If it recirculates, the air will just get heated up and the engine will cook. You are clearly a capable and smart guy and I hope you'll do a good job installing your generator. Also note, when it comes to ducting air in and out of an engine room space, precision is good! Hot air discharge ducting should be sealed from the 'engine room' as best as you can manage. Even more important, is to ensure that ambient air coming into the space isn't being heated up too much before getting used for cooling. Our reference was +10 degC maximum. Love your videos and all the work & development you do. By comparison, I live in a London apartment and occasionally have to mend one of my bicycles or maybe change a grip on a golf club. I love to cook though, and enjoy your impressive efforts in the kitchen!
I am totally living vicariously through both of you! Wish I had had a man who would have done these things with me! 3 husbands and never found him. I am enjoying your projects immensely!
some time you want a heat exchanger in your generator coolant loop to bonus heat the glycol in the floor heating instead of dumping it outside.
I look forward to your videos each week to see all of the progress you’ve made!
Just blown away at what the two if you accomplish on your own.
Please mention your plans for smoke and carbon monoxide alarms. I think you'd be sorry if you missed the opportunity to make your lights dimmable. Best shop ever.
Hey guys, they now make an expanding foam insulation that even I in all of the glory of 77 years was able to install by myself. I’m not a good guesser so got them a bit overfill and had to saw them flush, lol. Good luck Looking good
I'm super excited for all that is to come! The barking wolf was pretty talented along with all the electrical work. Slow and steady wins the race, you'll be happier with the results!
Amazing!!!
You guys are doing awesome!!
You two are the most amazing couple that I follow on YT and the perfect couple the way you work together
Wow y'all are so smart. Is there anything y'all can't do? Amazing
great progress
Thanks for the video. Looks awesome.
I did a marine (boat) 1.5" exhaust port thru a 10" x 10" galvanized plate in a 2 x 6 framed 10ft x 13ft gen building with insulation and wall board etc. Over the last year, maybe 15 x 30min runs and 5 x 1hr runs of 8000w Champion gen led to wood char and eventually a smoldering fire in the wall around the thimble and then.... full blow generator building fire at midnight with propane tanks sitting outside the building and that eventually heated and joined in the fire. Fire investigator said that wood can char as low as 200F (web search shows 500F'ish). Don't mean this to be naysaying, but I'm a bit shaken over the slow path to disaster (nothing was ever visible and no smoke during gen runs) and the horrendous result 12hrs after the last run. Just no warning and I thought I was being careful. Thus - wanted to encourage to check and re-check that thimble - it looks a little sparse to me as a layman or maybe I'm just traumatized still. I also had high levels of Carbon Monoxide even with exhaust piped out and air flow with same size fan you're showing - had to hold breath to go in and turn it off. Read that Carbon Monoxide in air can be explosive? but not sure I believe that - something else to check out. Sound wise, I think it reduced it by 50% - so 74db ''rated' generator was registering 70db 4 feet from outside of shed - pretty darn loud. For me, it was just a failure to run a generator in a 'room' as apposed to perhaps a box outside. Thanks for sharing - love you're channel and will be following this generator install with great interest.
Yes a double wall version would be much safer.
Seems like there should be in the install instructions for the generator, how many inches to combustibles there should be for the exhaust. I would think a minimum of 2-3"?
I'm so intimidated by electoral but that was awesome Eric!@. Arial, you 2 are such a compliment to each other. Loving seeing the transformation of this shop. Can't wait for more.🎉👌👏
Best hand puppet show ever! 😂
Thanks for the video Arielle & Eric !
Wow!! It looks fantastic! I've been watching Montana Haven/Alaska edition. Just delightful. Good luck, guys. I really enjoy your cooking & fishing. Brilliant. God bless you and many prayers 🙏🏻 ❤️
I just love your videos, diy everything 😂 you guys are amazing to watch and your projects are never for the faint hearted but you two just soldier on and get things done. For the past few years I have seen you tackle some huge projects but this Quonset hut is on another level. Well done guys keep on keeping on! ❤
Loved the baying wolf! 😂
Great job!
I'm surprised you didn't go with LED shop lights being off grid. Having almost 2kw required just for the 12 lights seems a bit excessive. Especially if you plan on using solar. Also I agree with the commentor who said voltage drop might be an issue with the long wire runs.
The lights are LED
@@SimpleLivingAlaska Wow that's alot of wattage for LED lights.