KZhead
Ойын-сауық

Timelapse Final Fantasy Gunblade Printed on a CR-30

Chris's Workshop
2021 ж. 20 Там.
1 085 330 Рет қаралды
Жүктеу

a timelapse of my latest WIP prop on my newest machine
~~~~~~~~~~~~~~~~~~~~~~~
Help fund what I do!
My Patreon!
/ chris3dprintshop
Buy me a coffee!
www.buymeacoffee.com/ChrisRob...
Ko-Fi!
ko-fi.com/chrisrobertson
Affiliate links!
Audible Plus!
amzn.to/3bHIVXl
Kindle Unlimited
amzn.to/343wXD2
30 day free trial of Amazon Prime
amzn.to/3ytPtCA
Amazon Prime
amzn.to/3f4eD36
Amazon Prime Music
amzn.to/3ypOvaD
Do you buy models from DO3D? Click the link below! you'll let them know i sent you and it will help me out a lot!
Use code CRTAF20 at checkout!
store.do3d.com/171242/11951
My Etsy!
www.etsy.com/shop/CarosPrints
My Equipment!
Ender 3 - amzn.to/3aEEjRd
Ender 3 Pro - amzn.to/3aFBOxY
Ender 3 V2 - amzn.to/3gBqruR
Ender 3 Max - amzn.to/3gBr1Jd
Ender 5 Plus - amzn.to/3aCgnxL
Cr-10 Max - amzn.to/3gAHywK
Cannon EOS M50 - amzn.to/3gP8SYz
Pixpro AZ528 Camera - amzn.to/3azOfeY
~~~~~~~~~~~~~~~~~~~~~~~~~~
Socials!
Instagram! / chris_3d_print_shop
Facebook! / chris3dprintshop
TikTok! / chris3dprintshop

Пікірлер

  • This printer is called a CR-30. its listed in the title and now pinned in the comments for those who cant find it

    @Chriss_Workshop@Chriss_Workshop3 ай бұрын

    • What is the song called?

      @johnd.9149@johnd.91493 ай бұрын

    • Shazam says Focu Objec - an jon​@@johnd.9149

      @BlackMeowgic@BlackMeowgic2 ай бұрын

  • I hope that's a mannequin and not some psychopath that didn't move the entire time that was printing

    @Dustin-jj5eh@Dustin-jj5eh Жыл бұрын

    • >.>

      @Chriss_Workshop@Chriss_Workshop Жыл бұрын

    • 😆

      @xsixinfantryx@xsixinfantryx10 ай бұрын

    • ​@@Chriss_Workshop😂😂😂

      @JezzyCrazyTV@JezzyCrazyTV6 ай бұрын

    • 😂😂

      @ternocimadh5863@ternocimadh58634 ай бұрын

    • Or his printer just prints fast. 😂

      @brums7743@brums77434 ай бұрын

  • Never thought about the possibility of a conveyer 3d printer thats pretty cool.

    @NoraIconiq@NoraIconiq6 ай бұрын

    • Its cool, but really hard to use 😢

      @snowshoyo@snowshoyo4 ай бұрын

    • @@snowshoyo No its not, the software deals with it, no different to 3 axis printers

      @wolfe1970@wolfe19703 ай бұрын

    • @@wolfe1970 The bed and warps are a headache to deal with

      @snowshoyo@snowshoyo3 ай бұрын

    • Agreed. It takes a lot to dial the machine in. It kind of needs a different approach compared to like an ender 3. But if you can get the stubborn thing to work, you can get some neat prints

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

    • ⁠@@wolfe1970this does seem to be a super difficult to deal with printer. I wish everything was like that, “just download the software”

      @TheDestroyer702@TheDestroyer70228 күн бұрын

  • That is the coolest and weirdest 3d printer I have ever seen

    @spoopy445@spoopy445 Жыл бұрын

  • Now That’s some good bed adhesion

    @The_Man-chanic@The_Man-chanic3 ай бұрын

  • I have never seen a treadmill printer before

    @lagrush9039@lagrush90397 ай бұрын

    • I can’t tell if I should be memorized or scared

      @Histerhull@Histerhull7 ай бұрын

  • First time I see such a printer...great thing, it opens many new possibilities

    @zugesinddoof9885@zugesinddoof98854 ай бұрын

    • Still a little new. The cr30 came out about november 2020. Granted i know in internet time thats ages ago. But before that we just had the black belt printer and the white knight printer. Which wasnt exactly advertised much so it was hard to hear about them

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

  • Imagine if in the near future 3d printers can actually print at this speed, that would be awesome to see!

    @DoosinCooxProdz@DoosinCooxProdz2 күн бұрын

  • Kinda impressive the bed adhesion to support the hanging part off the bed

    @xXIamJAEXx@xXIamJAEXx3 ай бұрын

  • Nice work. Looking good man! Keep it going :D

    @DukeFavre@DukeFavre2 жыл бұрын

  • This is one of my favourite printers

    @Benm8_@Benm8_3 ай бұрын

  • This is beautiful 🥹🥹

    @Shadow3DPrints@Shadow3DPrints26 күн бұрын

  • Once the second half is printed and both halves are glued, you can place the full item in a large container with acetone in the bottom to expose it to acetone vapor. The vapor will react with the survace, melting the plastic slightly, allowing the surface tension to smooth out the print lines. It only takes a few minutes, which makes it the best method for smoothing. I might recommend though, that prior to gluing you might consider inserting some metal supports given the size of the piece. A metal rod or two will definitely help prevent it from drooping or breaking under its own weight. As well as add weight to it to make it feel a lot more like a real item.

    @ChrisR2020@ChrisR20203 ай бұрын

    • Depends on the plastic used. PLA is a no but abs works wonders with acetone.

      @YutaXun@YutaXun3 ай бұрын

    • So while thats a method, theres quite a lot of space here so you'd need a large enough container. When i made it, i simply glued it together. And used a soldering iron on the edges to weld up the outside. You really dont need a metal rod because it isnt very long and is relatively thick. I have a full video featuring me building and finishing the prop on my channel.

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

    • Also for smoothing, theres so much flat space, my orbital sander and some filler primer knocked it out very quickly with nearly no effort

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

    • Acetone dont work on pla.

      @andrewut7ya511@andrewut7ya5113 ай бұрын

  • Das Ergebnis ist beeindruckend!😯

    @printyourcah9849@printyourcah98495 ай бұрын

  • I would love a cr-30 as it seems like such a good way to automate printing small parts like gears and knobs continuously. And pair it with like a pla maker (which melts pellets to create pla filament) and you have basically infinite amount of parts to sell

    @thehunter1113@thehunter1113Ай бұрын

  • Pretty slick!

    @LM.P@LM.P3 ай бұрын

  • Первый раз вижу принтер 🖨 в виде ленты, это очень круто!

    @Edvard-Aliev@Edvard-Aliev4 ай бұрын

    • С подключением) чтож с тобой будет если увидишь 5 осевой 3д принтер)))

      @weekendhistory1082@weekendhistory10823 ай бұрын

  • Beautiful!

    @EmoBoiLink@EmoBoiLink6 ай бұрын

  • Cool Timelapse

    @3dMobBros@3dMobBros7 ай бұрын

  • Brutal

    @SoyLuz_333@SoyLuz_3334 ай бұрын

  • Need, also don’t forget to press R1

    @Dimian7@Dimian73 ай бұрын

  • this could be used to make longer pieces, it looks very cool

    @saxo-xb9ob@saxo-xb9obАй бұрын

  • Brother working speed

    @tatabhaireddy2813@tatabhaireddy28133 күн бұрын

  • i GYAT to see him make a dragon slayer

    @mr.idoanimation@mr.idoanimation3 ай бұрын

    • Funny, i actually made one. Maybe i should post it 👀

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

  • This machine is awesome i think its so costly

    @anubhav3d@anubhav3d Жыл бұрын

    • Yeah its a little too expensive

      @Chriss_Workshop@Chriss_Workshop Жыл бұрын

    • SainSmart makes a much more affordable one that's pret ty much a clone

      @OscarOliu@OscarOliu Жыл бұрын

    • @@OscarOliuis not quite as good.

      @tihc1@tihc14 ай бұрын

  • That is great visualisation of 4th dimension🤩

    @MrMeloman19@MrMeloman193 ай бұрын

  • Bro can print a whole car with this printer

    @donzymunzy@donzymunzy4 ай бұрын

    • A long line at a time. Probably best to just do a bumper

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

    • Someone built a Lambo piece by piece

      @TheOrozs@TheOrozs3 ай бұрын

  • fucking awesome infinite printaaaah

    @AvMaGDraKHeC666@AvMaGDraKHeC6668 күн бұрын

  • I bought one for a buddy back in the day for like $60 at a flea market. It wasn't obviously high quality but it was actual metal and wood.

    @laternevercame@laternevercame3 ай бұрын

    • Shame i cant 3d print metal and wood. Yet.

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

    • @@Chriss_Workshop Sorta kinda can. Close enough.

      @laternevercame@laternevercame3 ай бұрын

  • It's a treadmill !!! LMAO.

    @FrustratedBaboon@FrustratedBaboon4 ай бұрын

  • HOLY CHEESE

    @YuOficial@YuOficial11 күн бұрын

  • The bend at the end ouch

    @thezx5795@thezx57959 күн бұрын

  • Ffxiv: 3D PRINTED GUN BLADE: LEVEL1

    @TroyPlaysgames-og9ot@TroyPlaysgames-og9ot6 ай бұрын

  • 3d printer is intermediate device, and it is as more important as bigger it is and construction it builds, setting up position and work of resource storages for itself and for construction it builds, with changes up to the changes of process, in connection to progress, weather and whatever outer conditions that bring changes to progress.

    @andreykolobikhin@andreykolobikhin4 ай бұрын

  • I buy this printer soon😅

    @3D-keychain-@3D-keychain-27 күн бұрын

  • ATF be knockin soon 😂😂😂

    @noelht1@noelht13 ай бұрын

  • ❤

    @Tuu_bot@Tuu_bot4 ай бұрын

  • BIG IRON

    @vangog5071@vangog5071Ай бұрын

  • This looks like real 3D because all axis moves in same time. Standard 3d printers move just two axis

    @QARepair@QARepair3 ай бұрын

    • No? A normal printer moves 2 axis. A 3d printer adds in the z axis, or depth

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

  • I wanna get myself one of those invfinite 3D printers dor me printers.

    @chriswatkins8711@chriswatkins87116 ай бұрын

  • I thought it was a revolver with a really long silencer

    @al_xve1576@al_xve15765 ай бұрын

  • - что вы выбираете, нож или револьвер? - да.

    @viacheslav4785@viacheslav47853 ай бұрын

  • Ff viii squall's gun blade

    @hotdj1979@hotdj19794 ай бұрын

  • NGL He gout us in the 1St half 😂😂😂

    @The_Keen_Kid@The_Keen_Kid4 ай бұрын

    • Tiktok actually wouldnt let me post this at first because of that lol

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

  • How much filament?

    @connorchwaszczewski5908@connorchwaszczewski59082 күн бұрын

  • Now how in the heck did it start the first few layers

    @user-sd2bh8ru5b@user-sd2bh8ru5b12 күн бұрын

    • I had it well tuned. Took forever to get it that way. But once it had it set, i could easily select a print and just walk away

      @Chriss_Workshop@Chriss_Workshop12 күн бұрын

  • Epic Oo

    @SantaDragon@SantaDragon3 ай бұрын

  • Yes

    @spencerappleby6024@spencerappleby60244 ай бұрын

  • Cool 🎉😂

    @user-pn4ly3so8u@user-pn4ly3so8u4 ай бұрын

  • What kind of 3-D printer is that?

    @cycomew8581@cycomew85813 ай бұрын

  • Now make a lament from Destiny 2

    @guardian_kai37@guardian_kai373 ай бұрын

  • I really want one of these but i am scared the prints will fall off the belt messing the whole thing up

    @Pumpkinseedreviews@Pumpkinseedreviews11 күн бұрын

    • It actually sticks annoyingly well. I cant remove the print unless i move the belt forward or use a steel paint scraper and pry from underneith

      @Chriss_Workshop@Chriss_Workshop11 күн бұрын

    • @@Chriss_Workshop lol atleast it works ig

      @Pumpkinseedreviews@Pumpkinseedreviews7 күн бұрын

  • How do you keep it from lifting off the bed from the weight on the end that is just floating in air?

    @calvinchao05@calvinchao053 ай бұрын

    • The bed adhesion is really strong. I actually cant remove the print without rolling it ti the end of the belt

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

  • Love the printer but I’m deathly afraid that the weight of the part of the print that’s hanging off causes the whole thing to detach

    @henrydendorf4847@henrydendorf4847Ай бұрын

    • This print i had set up on a small table and hanging off of the end with no problem. The bed adhearance is kind of insane. The only way i can get the print off is by forwarding the belt

      @Chriss_Workshop@Chriss_WorkshopАй бұрын

  • Ok, what material and what settings? I have one of these and struggle to get good prints off of it. It just sits in the corner of my shop collecting dust...

    @user-od8ny9nd5i@user-od8ny9nd5i3 ай бұрын

    • It takes a LOT of patience to print with this thing. This video was recorded years ago. I've long since sold the printer. The settings were default aside from some basic stuff for the sword like 3 walls and 15% infill. I think print speed was 45mm/s? Its all about getting that annoying bed leveled so the nozzle really mashes in that first layer into the belt so everything sticks properly

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

  • WOW

    @Josh_connor@Josh_connor Жыл бұрын

  • Револьверная подача яда на лезвие

    @fuzzySlash@fuzzySlash3 ай бұрын

  • 💥

    @sevenpounds1754@sevenpounds17546 ай бұрын

  • Wow davon nehm ich 1set!

    @danielschrage-iv8zx@danielschrage-iv8zxАй бұрын

  • Bro in the video said 🗿

    @Bongbongo@Bongbongo Жыл бұрын

    • Must... not... botch... timelapse

      @Chriss_Workshop@Chriss_Workshop Жыл бұрын

  • Is it possible to create something like a motorcycle helmet with your printer ?

    @m..5494@m..54944 ай бұрын

    • You could make something that looked like one. But in no way would it be a safe replacement for a real helmet

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

  • Any advise for adhesive for a belt printer?

    @danielcooper2802@danielcooper2802 Жыл бұрын

    • i dont use any adhesives at all

      @Chriss_Workshop@Chriss_Workshop Жыл бұрын

    • What your settings?

      @danielcooper2802@danielcooper2802 Жыл бұрын

    • @@danielcooper2802 from what i've gathered from my friends with belt printers, that doesnt do anything. Its all in how you level your bed. Its just a royal pain to dial in

      @Chriss_Workshop@Chriss_Workshop Жыл бұрын

  • FFVIII ❤

    @aariuswins@aariuswins3 ай бұрын

  • Ahora ya solo le queda invertir a espejo y hacer la otra mitad.

    @OscartOriginal@OscartOriginal4 ай бұрын

    • Already did 😎

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

  • Could you please make a 3D printed slinky

    @DadPoolGaming85@DadPoolGaming854 ай бұрын

    • Slinky's i've heard can be difficult to print because of layer adhesion. I'll give it a shot though

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

    • @@Chriss_Workshop thank you 😁

      @DadPoolGaming85@DadPoolGaming854 ай бұрын

    • Aaaaand its done. Check my latest video.

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

    • @@Chriss_Workshop I've just been to watch the video great work

      @DadPoolGaming85@DadPoolGaming854 ай бұрын

  • How long did this take to print?

    @sircheeseburger123@sircheeseburger1232 жыл бұрын

    • Roughly 2 days. I think it was 1 day 15 hours. .2 layer height, 15% gyroid infill

      @Chriss_Workshop@Chriss_Workshop2 жыл бұрын

  • Why not…… KNIFE-WREEEEEENCH

    @ashadowawhisper@ashadowawhisper3 ай бұрын

  • 👍👍👍

    @user-nh5tm3gq3e@user-nh5tm3gq3e3 ай бұрын

  • İs it special files stl for these? Or you can print anything like this method?

    @osmanrumeli@osmanrumeli4 ай бұрын

    • You can print anything. Just stuff like swords work REALLY well

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

  • Is this a diy thing or an extension kit? Never seen one from Creality before

    @somewhatideal@somewhatideal6 ай бұрын

    • Creality CR30 Printmill

      @Chriss_Workshop@Chriss_Workshop6 ай бұрын

    • @@Chriss_Workshop thanks!!

      @somewhatideal@somewhatideal6 ай бұрын

  • Que tal sale esa impresora? He leído que tiene muchos fallos, pero para mí negocio me vendría bien una de esas que opinión tienes de ella? Que fallos te han salido, piezas son difíciles de encontrar?

    @chamuleitor@chamuleitor4 ай бұрын

    • Its a difficult machine to work with. The biggest issue is its rough to dial in and you cannot use it like a normal printer. Because of the angle it prints, you have to think about your supports differently. I dont care too much for the printer and ended up selling it a few months ago

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

  • which 3d printers is this with such baze?

    @aggelosthomas1564@aggelosthomas15644 ай бұрын

    • CR-30

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

  • ¿Cuál fue el tiempo final de impresión?

    @marlonflow88@marlonflow882 ай бұрын

    • 12 hours

      @Chriss_Workshop@Chriss_Workshop2 ай бұрын

  • I mean, if you need something really long then this seems great, otherwise it doesn’t seem as good as other printers, but who am I

    @Bedogg25@Bedogg252 ай бұрын

    • Its honestly a crap printer, ONLY use for props like swords

      @Chriss_Workshop@Chriss_Workshop2 ай бұрын

  • Love your gunblade, but don't use real weapons in practice battles squall 😂 damn cool printer!

    @Jatze92@Jatze923 ай бұрын

  • You don't know which model, free or paid, is my signature for the Lamborghini Lp560-4. I mean, by my signature, I mean it has details for every piece of income, so that it is possible to attach screws to each piece, and not just an external model. Because I will make a 1:10 miniature model first, then I will make molds with a 3D printer and make the chassis with carbon fiber. The rest of the pieces that can be used with carbon fiber are made in a lathe shop and the engine. I will see at the end if I can buy something similar. I hope you can help me find a model with these specifications

    @hamoutube@hamoutube4 ай бұрын

    • Im not helping you with that haha. You need to google or find a 3d modeler

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

    • I tried to search on the 3D models website, but I did not find anything other than models designated for games, and there are no interior details of the car. I know 3D design, but how to design it I have not seen or known, and I do not know English well, so perhaps the way I searched was wrong. That is why I am speaking to you because you have more experience.​@@Chriss_Workshop

      @hamoutube@hamoutube4 ай бұрын

    • Very very few car models have the interior. You'll have to find photos of the inside then most likely model them in yourself

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

    • @@Chriss_Workshop Yes, this is true. I think this is also the case. Designing the cabin is easy, but making the correct screw locations to connect the rest of the pieces is the most difficult because any screw location I make incorrectly will cause corrosion or failure of the project. I think there is no choice but to create an original design only.

      @hamoutube@hamoutube4 ай бұрын

  • A sword with a muzzle at the tip would make far more sense.

    @NoThankYouToo@NoThankYouToo6 ай бұрын

    • No final fantasy weapon makes sense.

      @Chriss_Workshop@Chriss_Workshop6 ай бұрын

    • It's a game props, in the game lore you increase your slash damage by pulling the trigger as you swing the blade

      @middleagebrotips3454@middleagebrotips34545 ай бұрын

    • Yep, firing the gun makes the blade vibrate, allowing it to cut easier. According to game lore

      @Chriss_Workshop@Chriss_Workshop5 ай бұрын

  • How do the heavy side not tip off why printing

    @Mr4twenty.357@Mr4twenty.357Ай бұрын

    • The bed adhesion is kind of insane. The print wont peel off at all until i've had the belt progress forward

      @Chriss_Workshop@Chriss_WorkshopАй бұрын

  • Gotta be honest at first I thought it was part of a toilet or something.

    @DETHdressedInRED@DETHdressedInRED3 ай бұрын

    • New toilet handle. Press R1 when flushing to power flush to prevent clogs 🤣

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

  • How many hours was that

    @hvdb1234@hvdb12344 ай бұрын

    • 12

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

  • Can you share your slicer and your slicer profile please. i havent been able to get my CR30 to print at all so difficult

    @thethinkstudio1200@thethinkstudio12008 ай бұрын

    • So i used creality's belt slicer. The one that came with the printer. But theres nothing fancy in my profile. Its mostly the machine. Its a royal pain to dial in and get printing successfully

      @Chriss_Workshop@Chriss_Workshop8 ай бұрын

    • @@Chriss_Workshop yeah I use same slicer it came with and basic profile. But have never been able to get a print to stick

      @thethinkstudio1200@thethinkstudio12008 ай бұрын

    • @@thethinkstudio1200 you gotta really get close to the bedcon that first layer. Really squish it onto the belt

      @Chriss_Workshop@Chriss_Workshop8 ай бұрын

  • Wie viel kostet das so

    @user-rh1qr8bp3l@user-rh1qr8bp3l4 күн бұрын

  • What printer is this?

    @grace09979@grace099793 ай бұрын

    • Cr30

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

    • It's very insane 🤯

      @grace09979@grace099793 ай бұрын

  • Only reason i would buy one of these cosplay stuff

    @Post2kart@Post2kart4 ай бұрын

  • 思ってたんとちゃう

    @user-ui8zx9rf4y@user-ui8zx9rf4y3 ай бұрын

  • I meed that

    @YingYang_2@YingYang_23 ай бұрын

  • finaly I found a printer able to print my c....

    @MetrologieGiraud@MetrologieGiraud4 ай бұрын

    • I believe you need an A1 mini

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

    • @@Chriss_Workshop you're nasty.

      @MetrologieGiraud@MetrologieGiraud3 ай бұрын

    • But not inaccurate

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

  • So Far This is the most Far... 😮

    @rmaul3128@rmaul31282 ай бұрын

  • Want and need one infinity printer

    @Jillsworld386@Jillsworld38625 күн бұрын

  • Is the round chamber supposed to be so massive?

    @OscarOliu@OscarOliu Жыл бұрын

    • It isnt as large as you think. The angle just makes everything seem bigger

      @Chriss_Workshop@Chriss_Workshop Жыл бұрын

  • А я думал, из "В другом мире со смартфоном"...

    @user-mc9mn9ru4p@user-mc9mn9ru4p3 ай бұрын

  • Hello, could you help me calibrate the CR30 printer? I can't do a good calibration 🙏🏼🥹

    @spaart98as74@spaart98as747 ай бұрын

    • Sorry but no. That things a true pain to dial in and i dont quite know how to describe it without fiddling with the machine with my own hands

      @Chriss_Workshop@Chriss_Workshop7 ай бұрын

  • Whats the name this machine ?

    @ALINE-kh4lf@ALINE-kh4lf3 ай бұрын

    • Cr 30

      @Chriss_Workshop@Chriss_Workshop3 ай бұрын

  • How much is this printer for and name ?

    @user-zc2td6wz9c@user-zc2td6wz9c4 ай бұрын

    • Cr-30 belt printer. $749 on amazon

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

    • amzn.to/48JK5gF

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

  • Having stl

    @aswath_tamilan@aswath_tamilan7 ай бұрын

    • Google is an amazing website

      @Chriss_Workshop@Chriss_Workshop7 ай бұрын

    • @@Chriss_Workshop 😅🤣🤣 gotta

      @aswath_tamilan@aswath_tamilan7 ай бұрын

  • А как такие координаты называются? Интересненько😊

    @user-sj8bh4fd3g@user-sj8bh4fd3g4 ай бұрын

    • Cr30 belt printer

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

  • How did you get this print quality on the CR30 ?

    @FlavienCadet@FlavienCadetАй бұрын

    • Way too much fine tuning

      @Chriss_Workshop@Chriss_WorkshopАй бұрын

  • i thought it was a gun

    @user-sm4qi5lf5d@user-sm4qi5lf5d23 күн бұрын

  • que impresora es esa?

    @Kugoi_Studios@Kugoi_Studios4 ай бұрын

    • Cr30 belt printer

      @Chriss_Workshop@Chriss_Workshop4 ай бұрын

  • Hackerrrrr😂

    @LawanSarwar@LawanSarwar5 ай бұрын
KZhead